arXiv subjects

Mark Taylor

Publications and source records attributed to Mark Taylor.

At least 19 recordsLinked to original sources

arXiv2026

Valorisation of Fermentation Side-Stream for Waste-to-Mycoprotein: Nutrient Composition, Metabolic Insights and Process Optimisation

Fermentation-derived side streams represent an underutilised resource for sustainable protein production. This study investigates the potential of centrate from industrial Fusarium venenatum fermentation as a nutrient source for fungal biomass generation. Following compositional characterisation, a synthetic centrate medium was formulated and evaluated using a Box-Behnken design combined with response surface methodology. Across 46 experimental runs, cell dry weight (CDW) ranged from 0.22 to 3.87 g per liter, demonstrating a strong dependence on nutrient composition. Ammonia and glucose were identified as the dominant factors influencing biomass production, with significant nonlinear effects. The model predicted a maximum CDW of 4.17 g per liter under optimised conditions, which was experimentally validated at 3.99 g per liter. Carbon conversion efficiency reached up to 29.02%, indicating effective substrate utilisation. These findings demonstrate that fermentation-derived centrate can support substantial fungal growth, while highlighting its potential to enhance nutrient recovery and influence the biochemical composition of sustainable mycoprotein.

eess.SY↗

arXiv2026

Kinetics of Mycoprotein Production from Alternative Carbon Substrates

High throughput screening was used to study of the biokinetics of F. venenatum A3/5 cultivation on alternative carbon substrates, including monosaccharides, disaccharides and mixtures relevant to food & beverage, dairy and agricultural waste streams. Expired functional drink from the beverage sector was also assessed as the primary carbon source for mycoprotein production. Growth data was analysed using modified single and multiphase Gompertz models for comparison of maximum specific growth rate and progression milestones across diverse growth regimes. Time-series substrate and byproduct data was analysed using comparative metrics, providing an explanatory basis for the different growth phenotypes observed. Substrate type strongly influenced the apparent carbon allocation strategies, with rapidly consumed sugars such as glucose and sucrose supporting high growth rates, low biomass yield and a high degree of fermentative byproduct formation. Fructose and xylose cultivations led to slower overall growth but higher biomass yield and lower byproduct formation. Galactose and lactose showed distinct dynamics that suggested co-existence of transport and metabolic induction limitations. In all dual-substrate systems, sequential utilisation was observed. However, metabolic inheritance and environmental shift effects were highlighted as potential kinetic limitations. These conditions exhibited stunted diauxic growth and low yield from secondary sugars, with glucose-dominated primary growth significantly reshaping secondary substrate efficiencies relative to their study in silo. The expired functional drink supported highly rapid growth and achieved the highest maximum specific growth rate and biomass titre of all conditions examined, alongside reduced fermentative overflow and enhanced ethanol reassimilation relative to a compositionally matched synthetic control.

physics.bio-ph↗

arXiv2026

Combining data and metadata: hybrid tabular file formats

When working with astronomical data, metadata is also important. A general-purpose file format for transmission, processing and archiving large datasets should facilitate, among other things, both efficient processing of bulk data and encoding of rich semantic metadata. When choosing a format for a particular purpose sometimes no existing format satisfies both these requirements adequately, but combining one data-efficient and one metadata-rich format can be made to do so. This paper discusses considerations for designing such hybrid data/metadata formats, and reviews some examples such as VOParquet, FITS-plus and ECSV. We focus on tabular data, but some of the considerations may apply to other datatypes such as arrays as well.

astro-ph.IM↗

arXiv2025

Beyond Exascale: Dataflow Domain Translation on a Cerebras Cluster

Simulation of physical systems is essential across scientific and engineering domains. Commonly used domain decomposition methods are unable to simultaneously deliver both high simulation rate and high utilization in network computing environments. In particular, Exascale systems deliver only a small fraction their peak performance for these workloads. This paper introduces the novel Domain Translation algorithm, designed to overcome these limitations. On a cluster of 64 Cerebras CS-3 systems, we use this method to demonstrate unprecedented cluster performance across a range of metrics: we show simulations running in excess of 1.6 million time steps per second; we also demonstrate perfect weak scaling at 88% of peak performance. At this cluster scale, our implementation provides 112 PFLOP/s in a power-unconstrained environment, and 57 GFLOP/J in a power-limited environment. We illustrate the method by applying the shallow-water equations to model a tsunami following an asteroid impact at 460m-resolution on a planetary scale.

cs.DC↗

arXiv2025

Temporal Dynamics of Microbial Communities in Anaerobic Digestion: Influence of Temperature and Feedstock Composition on Reactor Performance and Stability

Anaerobic digestion (AD) offers a sustainable biotechnology to recover resources from carbon-rich wastewater, such as food-processing wastewater. Despite crude wastewater characterisation, the impact of detailed chemical fingerprinting on AD remains underexplored. This study investigated the influence of fermentation-wastewater composition and operational parameters on AD over time to identify critical factors influencing reactor biodiversity and performance. Eighteen reactors were operated under various operational conditions using mycoprotein fermentation wastewater. Detailed chemical analysis fingerprinted the molecules in the fermentation wastewater throughout AD including sugars, sugar alcohols and volatile fatty acids (VFAs). Sequencing revealed distinct microbiome profiles linked to temperature and reactor configuration, with mesophilic conditions supporting a more diverse and densely connected microbiome. Significant elevations in Methanomassiliicoccus were correlated to high butyric acid concentrations and decreased biogas production, further elucidating the role of this newly discovered methanogen. Dissimilarity analysis demonstrated the importance of individual molecules on microbiome diversity, highlighting the need for detailed chemical fingerprinting in AD studies of microbial trends. Machine learning (ML) models predicting reactor performance achieved high accuracy based on operational parameters and microbial taxonomy. Operational parameters had the most substantial influence on chemical oxygen demand removal, whilst Oscillibacter and two Clostridium sp. were highlighted as key factors in biogas production. By integrating detailed chemical and biological fingerprinting with ML models this research presents a novel approach to advance our understanding of AD microbial ecology, offering insights for industrial applications of sustainable waste-to-energy systems.

q-bio.QM↗

arXiv2025

TOPCAT/STILTS Integration

TOPCAT and STILTS are related packages for desktop analysis of tabular data, presenting GUI and command-line interfaces respectively to much of the same functionality. This paper presents features in TOPCAT that facilitate use of STILTS.

astro-ph.IM↗

arXiv2024

Mitigating Metropolitan Carbon Emissions with Dynamic Eco-driving at Scale

The sheer scale and diversity of transportation make it a formidable sector to decarbonize. Here, we consider an emerging opportunity to reduce carbon emissions: the growing adoption of semi-autonomous vehicles, which can be programmed to mitigate stop-and-go traffic through intelligent speed commands and, thus, reduce emissions. But would such dynamic eco-driving move the needle on climate change? A comprehensive impact analysis has been out of reach due to the vast array of traffic scenarios and the complexity of vehicle emissions. We address this challenge with large-scale scenario modeling efforts and by using multi-task deep reinforcement learning with a carefully designed network decomposition strategy. We perform an in-depth prospective impact assessment of dynamic eco-driving at 6,011 signalized intersections across three major US metropolitan cities, simulating a million traffic scenarios. Overall, we find that vehicle trajectories optimized for emissions can cut city-wide intersection carbon emissions by 11-22%, without harming throughput or safety, and with reasonable assumptions, equivalent to the national emissions of Israel and Nigeria, respectively. We find that 10% eco-driving adoption yields 25%-50% of the total reduction, and nearly 70% of the benefits come from 20% of intersections, suggesting near-term implementation pathways. However, the composition of this high-impact subset of intersections varies considerably across different adoption levels, with minimal overlap, calling for careful strategic planning for eco-driving deployments. Moreover, the impact of eco-driving, when considered jointly with projections of vehicle electrification and hybrid vehicle adoption remains significant. More broadly, this work paves the way for large-scale analysis of traffic externalities, such as time, safety, and air quality, and the potential impact of solution strategies.

eess.SY↗

arXiv2024

High Throughput Parameter Estimation and Uncertainty Analysis Applied to the Production of Mycoprotein from Synthetic Lignocellulosic Hydrolysates

The current global food system produces substantial waste and carbon emissions while exacerbating the effects of global hunger and protein deficiency. This study aims to address these challenges by exploring the use of lignocellulosic agricultural residues as feedstocks for microbial protein fermentation, focusing on Fusarium venenatum A3/5, a mycelial strain known for its high protein yield and quality. We propose a high throughput microlitre batch fermentation system paired with analytical chemistry to generate time-series data of microbial growth and substrate utilisation. An unstructured biokinetic model was developed using a bootstrap sampling approach to quantify uncertainty in the parameter estimates. The model was validated against an independent dataset of a different glucose-xylose composition to assess the predictive performance. Our results indicate a robust model fit with high coefficients of determination and low root mean squared errors for biomass, glucose, and xylose concentrations. Estimated parameter values provided insights into the resource utilisation strategies of Fusarium venenatum A3/5 in mixed substrate cultures, aligning well with previous research findings. Significant correlations between estimated parameters were observed, highlighting challenges in parameter identifiability. This work provides a foundational model for optimising the production of microbial protein from lignocellulosic waste, contributing to a more sustainable global food system.

physics.bio-ph↗

arXiv2024

TOPCAT Corner Plot

TOPCAT is a desktop GUI tool for working with tabular data such as source catalogues. Among other capabilities it provides a rich set of visualisation options suitable for interactive exploration of large datasets. The latest release introduces a Corner Plot window which displays a grid of linked scatter-plot-like and histogram-like plots for all pair and single combinations from a supplied list of coordinates.

astro-ph.IM↗

arXiv2022

Improving Performance in Java: TOPCAT and STILTS

TOPCAT and STILTS are mature Java desktop applications for working with tabular data that have always had a focus on efficiency for large or very large data sets. This paper presents some progress, experience and lessons learned from efforts over recent years to improve performance further by multithreading key algorithms as well as other strategies.

astro-ph.IM↗

arXiv2022

Thermodynamically consistent versions of approximations used in modelling moist air

Some existing approaches to modeling the thermodynamics of moist air make approximations that break $\textit{thermodynamic consistency}$, such that the resulting thermodynamics do not obey the 1st and 2nd laws or have other inconsistencies. Recently, an approach to avoid such inconsistency has been suggested: the use of $\textit{thermodynamic potentials}$ in terms of their $\textit{natural variables}$, from which all thermodynamic quantities and relationships are derived. In this paper, we develop this approach for $\textit{unapproximated}$ moist air thermodynamics and two widely used approximations: the constant $\kappa$ approximation and the dry heat capacities approximation. The consistent constant $\kappa$ approximation is particularly attractive because it leads to, when using virtual potential temperature $\theta_v$ as the thermodynamic variable, adiabatic dynamics that depend only on total mass, independent of the breakdown between water forms. Additionally, a wide variety of material from different sources in the literature on thermodynamics in atmospheric modelling is brought together. It is hoped that this paper provides a comprehensive reference for the use of thermodynamic potentials in atmospheric modelling, especially for the three systems considered here.

physics.ao-ph↗

arXiv2021

Taplint, the TAP Service Validator

TAP, the Table Access Protocol, is a widely used Virtual Observatory specification allowing client software to interact with remote database services in a standardised way. This paper presents taplint, a tool for assessing the compliance of deployed TAP services with the the dozen or so formal specifications that form the TAP protocol stack. We provide an overview of its capabilities and operation, and the context within which it is used to improve robustness of data services.

astro-ph.IM↗

arXiv2020

Spreading the word -- current status of VO tutorials and schools

With some telescopes standing still, now more than ever simple access to archival data is vital for astronomers and they need to know how to go about it. Within European Virtual Observatory (VO) projects, such as AIDA (2008-2010), ICE (2010-2012), CoSADIE (2013-2015), ASTERICS (2015-2018) and ESCAPE (since 2019), we have been offering Virtual Observatory schools for many years. The aim of these schools are twofold: teaching (early career) researchers about the functionalities and possibilities within the Virtual Observatory and collecting feedback from the astronomical community. In addition to the VO schools on the European level, different national teams have also put effort into VO dissemination. The team at the Centre de Donn\'ees astronomiques de Strasbourg (CDS) started to explore more and new ways to interact with the community: a series of blog posts on AstroBetter.com or a lunch time session at the virtual EAS meeting 2020. The Spanish VO has conducted virtual VO schools. GAVO has supported online archive workshops and maintains their Virtual Observatory Text Treasures. In this paper, we present the different formats in more detail, and report on the resulting interaction with the community as well as the estimated reach.

astro-ph.IM↗

arXiv2020

TOPCAT Visualisation over the Web

The desktop GUI catalogue analysis tool TOPCAT, and its command-line counterpart STILTS, offer among other capabilities visual exploration of locally stored tables containing millions of rows or more. They offer many variations on the theme of scatter plots, density maps and histograms, which can be navigated interactively. These capabilities have now been extended to a client-server model, so that a plot server can be run close to the data storage, and remote lightweight HTML/JavaScript clients can configure and interact with plots based on that data. The interaction can include pan/zoom/rotate navigation, identifying individual points, and potentially subset selection. Since only the pixels and not the row data are transmitted to the client, this enables flexible remote visual exploration of large tables at relatively low bandwidth. The web client can request any of the plot options available from TOPCAT/STILTS. Possible applications include web-based visualisations of static datasets too large to transmit, visual previews of archive search results, service-configured arrays of plots for complex datasets, and embedding visualisations of local or remote tables into Jupyter notebooks.

cs.DC↗

arXiv2020

Industry-Relevant Implicit Large-Eddy Simulation of a High-Performance Road Car via Spectral/hp Element Methods

We present a successful deployment of high-fidelity Large-Eddy Simulation (LES) technologies based on spectral/hp element methods to industrial flow problems, which are characterized by high Reynolds numbers and complex geometries. In particular, we describe the numerical methods, software development and steps that were required to perform the implicit LES of a real automotive car, namely the Elemental Rp1 model. To the best of the authors' knowledge, this simulation represents the first fifth-order accurate transient LES of an entire real car geometry. Moreover, this constitutes a key milestone towards considerably expanding the computational design envelope currently allowed in industry, where steady-state modelling remains the standard. To this end, a number of novel developments had to be made in order to overcome obstacles in mesh generation and solver technology to achieve this simulation, which we detail in this paper. The main objective is to present to the industrial and applied mathematics community, a viable pathway to translate academic developments into industrial tools, that can substantially advance the analysis and design capabilities of high-end engineering stakeholders. The novel developments and results were achieved using the academic-driven open-source framework Nektar++.

cs.CE↗

arXiv2019

Efficient IMEX Runge-Kutta methods for nonhydrostatic dynamics

We analyze the stability and accuracy (up to third order) of a new family of implicit-explicit Runge-Kutta (IMEX RK) methods. This analysis expedites development of methods with various balances in the number of explicit stages and implicit solves. We emphasize deriving methods with large stability regions for horizontally explicit vertically implicit (HEVI) partitionings of nonhydrostatic atmosphere models. The IMKG2 and IMKG3 families of IMEX RK methods are formulated within this framework. The HOMME-NH model with a HEVI partitioning is used for testing the accuracy and stability of various IMKG2-3 methods. The efficiency of several IMKG2-3 methods is demonstrated in HOMME-NH and compared to other IMEX RK methods in the literature.

math.NA↗

arXiv2018

TOPCAT and Gaia

TOPCAT, and its command line counterpart STILTS, are powerful tools for working with large source catalogues. ESA's Gaia mission, most recently with its second data release, is producing source catalogues of unprecedented quality for more than a billion sources. This paper presents some examples of how TOPCAT and STILTS can be used for analysis of Gaia data.

astro-ph.IM↗

arXiv2017

The Astrophysics Source Code Library: What's new, what's coming

The Astrophysics Source Code Library (ASCL, ascl.net), established in 1999, is a citable online registry of source codes used in research that are available for download; the ASCL's main purpose is to improve the transparency, reproducibility, and falsifiability of research. In 2017, improvements to the resource included real-time data backup for submissions and newly-published entries, improved cross-matching of research papers with software entries in ADS, and expansion of preferred citation information for the software in the ASCL.

astro-ph.IM↗