arXiv subjects

Mariona Coll

Publications and source records attributed to Mariona Coll.

3 recordsLinked to original sources

arXiv2026

Topographic patterning in perovskite oxide membranes for local control of strain, nanomechanics and electronic structure

Single-crystalline perovskite oxide membranes provide a powerful platform to access physical properties that are inaccessible in bulk crystals and substrate-clamped thin films. Within this context, the deliberate fabrication of tailored corrugations provides a reliable mean to impose local curvature enabling deterministic modulation of functional properties. Here, we demonstrate controlled topographic patterning in (00l)-oriented La$_{0.7}$Sr$_{0.3}$MnO$_3$ (LSMO) membranes with thicknesses ranging from 4 to 100 nm where they spontaneously form sinusoidal wrinkles with thickness-dependent periodicity and amplitude. The wrinkle morphology directly modulates membrane stiffness and generates exceptionally large local strains exceeding 5\% with strain gradients approaching $\sim$ 2.5 x 10$^{7}$ m$^{-1}$ in the thinnest membranes. These extreme deformations suppress antiferrodistortive octahedral rotations and stabilize polar distortions, evidencing a curvature-driven symmetry transformation. The surface potential variation reinforces the formation of wrinkled-induced polar patterns being strongly modulated with thickness. The variation of Mn oxidation state from $\sim$ 3.2+ to $\sim$ 2.85+ provides a direct chemical signature of a thickness-controlled electronic transition. These results demonstrate that corrugation-induced strain gradients in oxide membranes with different thicknesses can drive coupled structural, nanomechanical and electronic transformations, offering a singular route to engineer their functional states for next-generation electronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Epitaxially Grown Single-Crystalline SrTiO3 Membranes Using a Solution-Processed, Amorphous SrCa2Al2O6 Sacrificial Layer

Water-soluble sacrificial layers based on epitaxially-grown, single crystalline (Ca, Sr, Ba)3Al2O6 layer are widely used for creating free-standing perovskite oxide membranes. However, obtaining these sacrificial layers with intricate stoichiometry remains a challenge, especially for molecular beam epitaxy (MBE). In this study, we demonstrate the hybrid MBE growth of epitaxial, single crystalline SrTiO3 films using a solution processed, amorphous SrCa2Al2O6 sacrificial layer onto SrTiO3 (001) substrates. Prior to the growth, the oxygen plasma exposure was used to first create the crystalline SrCa2Al2O6 layer with well-defined surface crystallinity. Utilizing reflection high energy electron diffraction, x-ray diffraction, and atomic force microscopy, we observe an atomic layer-by-layer growth of epitaxial, single crystalline SrTiO3 film on the SrCa2Al2O6 layer with atomically smooth surfaces. The SrCa2Al2O6 layer was subsequently dissolved in de-ionized water to create free-standing SrTiO3 membranes that were transferred onto a metal-coated Si wafer. Membranes created with Sr-deficiency revealed ferroelectric-like behavior measured using piezo force microscopy whereas stoichiometric films remained paraelectric-like. These findings underscore the viability of using ex-situ deposited amorphous SrCa2Al2O6 for epitaxial, single crystalline growth, as well as the importance of point defects in determining the ferroic properties in membranes.

cond-mat.mtrl-sci↗

arXiv2016

Diminish Electrostatic in Piezoresponse Force Microscopy through longer ultra-stiff tips

Piezoresponse Force Microscopy is a powerful but delicate nanoscale technique that measures the mechanical response resulting from the application of a highly localized electric field. Though mechanical response is normally due to piezoelectricity, other physical phenomena, especially electrostatic interaction, can contribute to the signal read. We address this problematic through the use of longer ultra-stiff probes providing state of the art sensitivity, with the lowest electrostatic interaction and avoiding working in high frequency regime. In order to find this solution we develop a theoretical description addressing the effects of electrostatic contributions in the total cantilever vibration and its quantification for different setups. The theory is subsequently tested in a Periodically Poled Lithium Niobate (PPLN) crystal, a sample with well-defined 0deg and 180deg domains, using different commercial available conductive tips. We employ the theoretical description to compare the electrostatic contribution effects into the total phase recorded. Through experimental data our description is corroborated for each of the tested commercially available probes. We propose that a larger probe length can be a solution to avoid electrostatic forces, so the cantilever-sample electrostatic interaction is reduced. For hard oxide samples we propose an ultra-stiff cantilever which avoids the use of high frequency voltage but still diminishing electrostatic forces. Our proposed commercially available solution have great implications into avoiding artifacts while studying soft biological samples, multiferroic oxides, and thin film ferroelectric materials and it opens a new window into tip engineering.

cond-mat.mtrl-sci↗