arXiv subjects

Mario Scheel

Publications and source records attributed to Mario Scheel.

12 recordsLinked to original sources

arXiv2024

Paste extrusion generates a surface lubrication layer

Dense particle-fluid mixtures, or \emph{pastes}, are encountered in the production of various materials, including animal feed, human food, pharmaceuticals, and biomass for bioenergy. The flow behavior of such dense deformable particulate media is poorly understood, as the interplay between applied stresses, particle deformability and interstitial fluids can be very complex. One challenging context is high pressure pipe flow, encountered in extrusion. Despite its widespread use, many questions remain about how during high pressure flow of the paste, the particle-fluid mixture behaves and interacts with boundaries. We show how high pressure paste extrusion induces the formation of a fluid boundary thinner than the particle size. The induced fluid layer emerges from a pressure-induced phase segregation process. The fluid layer is sufficiently thin to affect particle-wall contacts, making the paste friction coefficient tunable. Our results so offer potential pathways for reducing energy consumption and even extrusion product composition and failure.

cond-mat.soft↗

arXiv2024

Synchrotron radiation-based tomography of an entire mouse brain with sub-micron voxels: augmenting interactive brain atlases with terabyte data

Synchrotron radiation-based X-ray microtomography is uniquely suited for post mortem three-dimensional visualization of organs such as the mouse brain. Tomographic imaging of the entire mouse brain with isotropic cellular resolution requires an extended field-of-view and produces datasets of multiple terabytes in size. These data must be processed and made accessible to domain experts who may have only limited image processing knowledge. We present extended-field X-ray microtomography with 0.65 $\mu$m voxel size covering an entire mouse brain. The 4,495 projections from 8 x 8 offset acquisitions were stitched to reconstruct a volume of 15,000$^3$ voxels. The microtomography volume was non-rigidly registered to the Allen Mouse Brain Common Coordinate Framework v3 based on a combination of image intensity and landmark pairs. The data were transformed block-wise and stored in a public repository with a hierarchical format for navigation and overlay with anatomical annotations in online viewers such as Neuroglancer or siibra-explorer. This study demonstrates X-ray imaging and data processing for a full mouse brain, augmenting current atlases by improving resolution in the third dimension by an order of magnitude. The 3.3-teravoxel dataset is publicly available and easily accessible for domain experts via browser-based viewers.

physics.med-ph↗

arXiv2023

Sol-gel transition by evaporation in porous media

Historical monuments, outdoor stone sculptures and artworks made of porous materials are exposed to chemical and physical degradation over time. Presently, the most promising route for consolidation of weakened porous materials is the injection of viscoelastic solutions of polymerizing compounds. Those compounds, after injection, undergo a sol-gel transition inside the porous media through evaporation of the solvent. Finding a suitable gelifying solution as a consolidant calls for understanding the drying kinetics of viscoelastic fluids in porous media. Here, we present a multiscale study of the drying kinetics of solutions during the sol-gel transition. We investigate the drying dynamics and subsequent water uptake of a gel using NMR and X-ray microtomography techniques in porous materials. We find that during drying, a distinct front develops which separates the liquid region from the gelled region. This front advances from the free surface of evaporation towards the inner parts of the stone. We identify different drying periods which appear to be dependent on the intrinsic properties of the porous medium influencing strongly the homogeneity of the final gel distribution within a treated stone. Our findings not only are relevant for the consolidation of porous artworks but also for civil and soil engineering processes where the fluids considered are generally more complex than water.

cond-mat.soft↗

arXiv2023

Computational Model for Predicting Particle Fracture During Electrode Calendering

In the context of calling for low carbon emissions, lithium-ion batteries (LIBs) have been widely concerned as a power source for electric vehicles, so the fundamental science behind their manufacturing has attracted much attention in recent years. Calendering is an important step of the LIB electrode manufacturing process, and the changes it brings to the electrode microstructure and mechanical properties are worth studying. In this work, we reported the observed cracking of active material (AM) particles due to calendering pressure under ex situ nano-X-ray tomography experiments. We developed a 3D-resolved discrete element method (DEM) model with bonded connections to physically mimic the calendering process using real AM particle shapes derived from the tomography experiments. The DEM model can well predict the change of the morphology of the dry electrode under pressure, and the changes of the applied pressure and porosity are consistent with the experimental values. At the same time, the model is able to simulate the secondary AM particles cracking by the fracture of the bond under force. Our model is the first of its kind being able to predict the fracture of the secondary particles along the calendering process. This work provides a tool for guidance in the manufacturing of optimized LIB electrodes.

physics.comp-ph↗

arXiv2022

Current Status of Hard X-Ray Nano-Tomography on the Transmission Microscope at the ANATOMIX Beamline

The transmission X-ray microscope (TXM) on the Anatomix beamline welcomed its first nano-tomography users in 2019. The instrument is based on diffractive optics and works in the range of energies from 7 keV to 21 keV. A spatial resolution in 3D volumes of better than 100 nm can be achieved. The design allows imaging samples in air, and local tomography as well as off-axis tomography scans are possible. Scans below and above K-edges can be made to access elemental distribution. The TXM serves materials science and the bio-medical field.

physics.ins-det↗

arXiv2022

Three-dimensional imaging and analysis of annual layers in tree trunk and tooth cementum

The growth of plants, animals, and humans can give rise to layered structures associated with annual periodicity. Thickness variations are often correlated to nutrition supply and stress factors. The annual layers in a tree trunk with millimeter thickness can be directly counted, whereas the layers in tooth cementum with micrometer thickness are made visible using optical microscopy. These optical techniques rely on the surface evaluation or thin, optically transparent slices. Hard X-ray tomography with micrometer resolution, however, provides a three-dimensional view without physical slicing. We have developed a procedure to enhance the tomography data of annual layers in human and bovid tooth cementum. The analysis of a substantial part of an archeological human tooth demonstrated that the detected number of layers depended on the selected region and could vary between 13 and 27. The related average thickness of the annual layers was found to be (5.4 $\pm$ 1.9) $\mu$m for the human tooth, whereas the buffalo tooth exhibited a layer periodicity of 46 $\mu$m. The present study elucidates the potential of combining computational tools with high-quality micro computed tomography data to quantify the annual layers in tooth cementum for a variety of purposes including age-at-death determination.

physics.bio-ph↗

arXiv2019

Stability criterion for fresh cement foams

We prepare and study cement foam samples with well-controlled structure, i.e. containing monodisperse bubbles. We observe that the foam structure often changes before cement setting and identify ripening as the major destabilization mechanism at stake. Drainage plays only a minor role in cement foam destabilization except when bubble size is large. Then we show that a single stability criterion can be defined, for a large range of cement foams with different formulations. This criterion involves the bubble radius and the yield stress of the cement paste such as confined by and between the bubbles, at a given characteristic time after sample preparation.

cond-mat.soft↗

arXiv2018

Time lapse, three dimensional in situ imaging of ice crystal growth in a colloidal silica suspension

The freezing of colloidal suspensions is encountered in many natural and engineering processes such as the freezing of soils, food engineering, and cryobiology. It can also be used as a bio-inspired, versatile, and environmentally-friendly processing route for porous materials and composites. Yet, it is still a puzzling phenomenon with many unexplained features, due to the complexity of the system and the space and time scales at which the process should be investigated. We demonstrate here the interest of fast X-ray computed tomography to provide time-lapse, three-dimensional, in situ imaging of ice crystal growth in a colloidal silica suspension. The experimental measurements show that the local increase of colloid concentration does not affect the growth kinetics of the crystals, until the colloidal particles become closely packed. For particles much smaller than ice crystals, the concentrated colloidal suspension is equivalent to a simple liquid phase with higher viscosity and a freezing point determined by the concentration of colloidal particles.

physics.app-ph↗

arXiv2016

Experimental x-ray ghost imaging

We report an experimental proof of principle for ghost imaging in the hard x-ray energy range. We used a synchrotron x-ray beam that was split using a thin crystal in Laue diffraction geometry. With an ultra-fast imaging camera, we were able to image x-rays generated by isolated electron bunches. At this time scale, the shot noise of the synchrotron emission process is measurable as speckles, leading to speckle correlation between the two beams. The integrated transmitted intensity from a sample located in the first beam was correlated with the spatially resolved intensity measured on the second, empty, beam to retrieve the shadow of the sample. The demonstration of ghost imaging with hard x-rays may open the way to protocols to reduce radiation damage in medical imaging and in non-destructive structural characterization using Free Electron Lasers.

physics.optics↗

arXiv2015

Liquid morphologies and capillary forces between three spherical beads

Equilibrium shapes of coalesced pendular bridges in a static assembly of spherical beads are computed by numerical minimization of the interfacial energy. Our present study focuses on generic bead configurations involving three beads, one of which is in contact to the two others while there is a gap of variable size between the latter. In agreement with previous experimental studies, we find interfacial `trimer' morphologies consisting of three coalesced pendular bridges, and `dimers' of two coalesced bridges. In a certain range of the gap opening we observe a bistability between the dimer and trimer morphology during shrinking and growth. The magnitude of the corresponding capillary forces in presence of a trimer or dimer depends, besides the gap opening only on the volume or Laplace pressure of liquid. For a given Laplace pressure, the capillary forces in presence of a trimer are slightly larger than the force of a single bridges at the same gap opening, which could explain the shallow maximum and plateau of the capillary cohesion of a wetting liquid for saturations in the funicular regime.

cond-mat.soft↗

arXiv2003

Fluidization of wet granular matter

We have studied the effect of small amounts of added liquid on the dynamic behavior of a granular system consisting of spherical glass beads. The critical acceleration $Γ$ for fluidization is found to increase strongly when liquid is added. It furthermore depends on the bead radius, the height of the sample, and the shaking frequency. As our main result, we find that these dependencies can be presented in a factorized form. We present a simple model which accounts for most of our findings.

cond-mat.stat-mech↗

arXiv2003

The number of capillary bridges in a wet granular medium

We observed the appearance of capillary bridges in a granular medium consisting of glass beads after adding small amounts of liquid. We found the initial bridge formation depending on the bead roughness. Furthermore we obtained a statistics for the average number of bridges for randomly packed beads in dependence of the liquid content and were able to find an explanation therefore based on recent models and former experimental data.

cond-mat.stat-mech↗