arXiv subjects

Mario Ferraro

Publications and source records attributed to Mario Ferraro.

At least 19 recordsLinked to original sources

arXiv2025

Extreme nonlinear optics in optical fibers

This paper reviews the field of extreme nonlinear optics in optical fibers, highlighting key phenomena and advancements. It discusses multiple ionization effects caused by femtosecond laser pulses that generate plasma and induce permanent material modifications, as well as plasma luminescence and its dependence on material imperfections. The formation and dynamics of plasma filaments, including helical structures, are explored, along with the rainbow spiral emission pattern useful in communications and particle manipulation. The review covers the generation of spatial-temporal waves, supercontinuum broadening, and advanced modeling techniques, such as multimode unidirectional pulse propagation equations for describing optical pulse evolution. Experimental demonstrations involving discretized conical waves and supercontinuum generation optimization are detailed. The paper emphasizes the unique capabilities of photonic crystal fibers, especially hollow-core variants, in achieving broad supercontinua and Raman frequency combs, ultrashort pulse compression, high-harmonic generation, plasma formation, and nonclassical light production. Our outlook highlights ongoing research into spatiotemporal helicon waves, ultrashort pulse propagation, vacuum ultraviolet and mid-infrared supercontinuum generation, and innovative fiber technologies. Future directions focus on enhancing fiber performance, understanding multimodal wave dynamics, and expanding applications in telecommunications, sensing, and quantum science.

physics.optics↗

arXiv2025

Spatio-temporal equilibrium thermodynamics of guided optical waves at positive and negative temperatures

Optical thermalization has been recently studied in the 2D spatial evolution of (quasi-)monochromatic light waves propagating in multimode waveguides. Here, we investigate the spatio-temporal equilibrium properties of optical waves through the analysis of the (2+1)D Bose-Einstein thermal distribution and the corresponding classical Rayleigh-Jeans approximation. Numerical simulations of the nonlinear Schr\"odinger equation (NLSE) demonstrate relaxation toward the spatio-temporal Rayleigh-Jeans equilibrium state, as described by the corresponding wave turbulence kinetic equation. Remarkable adiabatic cooling phenomena stemming from the high-frequency tails of the Rayleigh-Jeans distribution are discussed and the consequent limitations of the classical approximation are highlighted. To overcome these issues, we make use of a quantum version of the NLSE whose associated kinetic equation describes relaxation toward the spatio-temporal Bose-Einstein equilibrium distribution. The analysis of thermodynamic properties reveals a strong dependence on the dispersion regime. In the anomalous dispersion regime, the system relaxes to positive-temperatures equilibrium states: as the number of modes of the waveguide increases, the fundamental spatial mode becomes macroscopically populated, while its temporal spectrum undergoes significant narrowing, ultimately leading to complete (2+1)D spatio-temporal condensation in the thermodynamic limit. In the normal dispersion regime, the system evolves toward negative-temperature equilibrium states characterized by an inverted spatial modal population. In this regime, we predict a phase transition to Bose-Einstein condensation at negative temperatures, which occurs by increasing the temperature above a negative critical value. Our work opens new avenues for future research and lay the groundwork for the development of spatiotemporal optical thermodynamics.

physics.optics↗

arXiv2025

Multiscale X-ray computed tomography of standard optical fibers

Optical fiber technologies enable high-speed communication, medical imaging, and advanced sensing. Among the techniques for the characterization of optical fibers, Xray computed tomography has recently emerged as a versatile non-destructive tool for mapping their refractive index variations in 3D. In this study, we present a multiscale characterization of standard optical fibers. We carry out an intercomparison of three tomography setups: classical computed microtomography, X-ray microscopy, and nanotomography. In each method, our analysis highlights the trade-offs between resolution, field of view, and segmentation efficiency. Additionally, we integrate deep learning segmentation thresholding to improve the image analysis process. Thanks to its large field of view, microtomography with classical sources is ideal for the analysis of relatively long fiber spans, where a low spatial resolution is acceptable. The other way around, nanotomography has the highest spatial resolution, but it is limited to very small fiber samples, e.g., fiber tapers and nanofibers, which have diameters of the order of a few microns. Finally, X-ray microscopy provides a good compromise between the sample size fitting the device's field of view and the spatial resolution needed for properly imaging the inner features of the fiber. Specifically, thanks to its practicality in terms of costs and cumbersomeness, we foresee that the latter will provide the most suitable choice for the quality control of fiber drawing in real-time, e.g., using the "One-Minute Tomographies with Fast Acquisition Scanning Technology" developed by Zeiss. In this regard, the combination of X-ray computed tomography and artificial intelligence-driven enhancements is poised to revolutionize fiber characterization, by enabling precise monitoring and adaptive control in fiber manufacturing.

physics.app-ph↗

arXiv2025

Spatio-spectral light-by-light moulding in multimode fibre

Controlling complex light waves to achieve desired behaviours or characteristics on demand presents a significant challenge. This task becomes even more complicated when manipulating speckled light beams owing to their inherently fuzzy intensity and phase structures. Here, we demonstrate that a weak speckled second-harmonic signal in a multimode graded-index fibre can be manipulated via its conservative interaction with a high-power co-propagating fundamental pump wave. Specifically, the spatial quality of the signal can be either enhanced or degraded by varying the pump's power or its modal power distribution. The underlying physical mechanism is the optically induced mode conversion, whose phase-matching can be controlled by the mode power distribution of the pump beam. This phenomenon enables new possibilities for manipulating complex light via material nonlinearities in multimode guiding structures. A striking example of this novel light-by-light control is the experimentally observed enhancement or partial suppression of the visible Raman Stokes cascade regulated by the second harmonic beam, while modulated by the mode power distribution of the fundamental beam.

physics.optics↗

arXiv2024

Concatenation of Kerr solitary waves in Ceramic YAG: application to coherent Raman imaging

A coherent concatenation of multiple Townes solitons may lead to a stable infrared and visible broadband filament in ceramic YAG polycrystal. This self-trapped soliton train is leveraged to implement self-referenced multiplex coherent anti-Stokes Raman scattering imaging. Simulations and experiments illustrating the filamentation process and the concatenation of focusing-defocusing cycles in ceramic and crystal YAG are presented. In addition, our simulations and experiments further examine the dependence of the filamentation onset location and supercontinuum generation upon peak input power. Understanding this dependence is key for implementation of viable CARS imaging techniques, due to the comparatively exceptional ability of YAG to generate supercontinuum which can enable higher-sensitivity imaging without delay lines.

physics.optics↗

arXiv2024

Light tailored by multimode fiber for multiphoton fluorescence microscopy

We study the diffraction of a particular class of beams, composed only by a combination of azimuthally invariant guided modes of an optical fiber. We demonstrate that such beams can be obtained by injecting a Gaussian beam in a small piece of silica graded-index multimode fiber. This minimalistic low-cost method is applied for improving the axial resolution of a two-photon microscope.

physics.optics↗

arXiv2023

Pure quartic three-dimensional spatiotemporal Kerr solitons

We analyze the formation of three-dimensional spatiotemporal solitons in waveguides with a parabolic refractive index profile and pure quartic chromatic dispersion. We show, by applying both variational approaches and full three-dimensional numerical simulations, that fourth-order dispersion has a positive impact on soliton stabilization against spatiotemporal wave collapse. Specifically, pure quartic spatiotemporal solitons remain stable within a significantly larger energy range with respect to their second-order dispersion counterparts.

nlin.PS↗

arXiv2023

Nonlinear dynamics of dissipative structures in coherently-driven Kerr cavities with a parabolic potential

By means of a modified Lugiato-Lefever equation model, we investigate the nonlinear dynamics of dissipative wave structures in coherently-driven Kerr cavities with a parabolic potential. The potential stabilizes system dynamics, leading to the generation of robust dissipative solitons in the positive detuning regime, and of higher-order solitons in the negative detuning regime. In order to understand the underlying mechanisms which are responsible for these high-order states, we decompose the field on the basis of linear eigenmodes of the system. This permits to investigate the resulting nonlinear mode coupling processes. By increasing the external pumping, one observes the emergence of high-order breathers and chaoticons. Our modal content analysis reveals that breathers are dominated by modes of corresponding orders, while chaoticons exhibit proper chaotic dynamics. We characterize the evolution of dissipative structures by using bifurcation diagrams, and confirm their stability by combining linear stability analysis results with numerical simulations. Finally, we draw phase diagrams that summarize the complex dynamics landscape, obtained when varying the pump, the detuning, and the strength of the potential.

physics.optics↗

arXiv2023

On spatial beam self-cleaning from the perspective of optical wave thermalization in multimode graded-index fibers

The input power-induced transformation of the transverse intensity profile at the output of graded-index multimode optical fibers from speckles into a bell-shaped beam sitting on a low intensity background is known as spatial beam self-cleaning. Its remarkable properties are the output beam brightness improvement and robustness to fiber bending and squeezing. These properties permit to overcome the limitations of multimode fibers in terms of low output beam quality, which is very promising for a host of technological applications. In this review, we outline recent progress in the understanding of spatial beam self-cleaning, which can be seen as a state of thermal equilibrium in the complex process of modal four-wave mixing. In other words, the associated nonlinear redistribution of the mode powers which ultimately favors the fundamental mode of the fiber can be described in the framework of statistical mechanics applied to the gas of photons populating the fiber modes. On the one hand, this description has been corroborated by a series of experiments by different groups. On the other hand, some open issues still remain, and we offer a perspective for future studies in this emerging and controversial field of research.

physics.optics↗

arXiv2022

Robust three-dimensional high-order solitons and breathers in driven dissipative systems: a Kerr cavity realization

We present a general approach to excite robust dissipative three-dimensional and high-order solitons and breathers in passively driven nonlinear cavities. Our findings are illustrated in the paradigmatic example provided by an optical Kerr cavity with diffraction and anomalous dispersion, with the addition of an attractive three-dimensional parabolic potential. The potential breaks the translational symmetry along all directions, and impacts the system in a qualitatively unexpected manner: three-dimensional solitons, or light-bullets, are the only existing and stable states for a given set of parameters. This property is extremely rare, if not unknown, in passive nonlinear physical systems. As a result, the excitation of the cavity with any input field leads to the deterministic formation of a target soliton or breather, with a spatiotemporal profile that unambiguously corresponds to the given cavity and pumping conditions. In addition, the tuning of the potential width along the temporal direction results in the existence of a plethora of stable asymmetric solitons. Our results may provide a solid route towards the observation of dissipative light bullets and three-dimensional breathers.

physics.optics↗

arXiv2022

Spatiotemporal mode decomposition of ultrashort pulses propagating in graded-index multimode fibers

We develop a spatiotemporal mode decomposition technique to study the mode power distribution of ultrashort pulses emerging from long spans of graded-index multimode fiber, for different input laser conditions. We find that beam mode power content in the dispersive pulse propagation regime can be described by the Bose-Einstein law, as a result of the process of power diffusion from linear and nonlinear mode coupling among nondegenerate mode groups. In the soliton regime, the output mode power distribution approaches the Rayleigh-Jeans law

physics.optics↗

arXiv2022

Dissipative Kerr solitons, breathers and chimera states in coherently driven passive cavities with parabolic potential

We analyze the stability and dynamics of dissipative Kerr solitons in the presence of a parabolic potential. This potential stabilizes oscillatory and chaotic regimes, favoring the generation of static DKSs. Furthermore, the potential induces the emergence of new dissipative structures, such as asymmetric breathers and chimera-like states. Based on a mode decomposition of these states, we unveil the underlying modal interactions.

physics.optics↗

arXiv2022

X-ray computed $\mu$-tomography for the characterization of optical fibers

In spite of their ubiquitous applications, the characterization of glass fibers by means of all-optical techniques is still facing some limitations. Recently, X-ray absorption has been proposed as a method for visualizing the inner structure of both standard and microstructure optical fibers. Here, we exploit X-ray absorption as nondestructive technique for the characterization of optical glass fibers. Starting from absorption contrast X-ray computed micro-tomography measurements, we obtain information about the spatial profile of the fiber refractive index at optical frequencies. We confirm the validity of our approach by comparing its results with complementary characterization techniques, based on electron spectroscopy or multiphoton microscopy.

physics.optics↗

arXiv2022

Multimode optical fiber beam-by-beam cleanup

We introduce and experimentally demonstrate the concept of all-optical beam switching in graded-index multimode optical fibers. Nonlinear coupling between orthogonally polarized seed and signal beams permits to control the spatial beam quality at the fiber output. Remarkably, we show that even a weak few-mode control beam may substantially enhance the quality of an intense, highly multimode signal beam. We propose a simple geometrical representation of the beam switching operation, whose validity is quantitatively confirmed by the experimental mode decomposition of the output beam. All-optical switching of multimode beams may find important applications in high-power beam delivery and fiber lasers.

physics.optics↗

arXiv2022

Multimode soliton collisions in graded-index optical fibers

In this work, we unveil the unique complex dynamics of multimode soliton interactions in graded-index optical fibers through simulations and experiments. By generating two multimode solitons from the fission of an input femtosecond pulse, we examine the evolution of their Raman-induced red-shift when the input pulse energy grows larger. Remarkably, we find that the output red-shift of the trailing multimode soliton may be reduced, so that it accelerates until it collides with the leading multimode soliton. As a result of the inelastic collision, a significant energy transfer occurs between the two multimode solitons: the trailing soliton captures energy from the leading soliton, which ultimately enhances its red-shift, thus increasing temporal separation between the two multimode solitons.

physics.optics↗

arXiv2021

Femtosecond nonlinear losses in multimode optical fibers

Research on multimode optical fibers is arousing a growing interest, for their capability to transport high-power laser beams, coupled with novel nonlinear optics-based applications. However, when beam intensities exceed a certain critical value, optical fiber breakdown associated with irreversible modifications of their refractive index occurs, triggered by multiphoton absorption. These processes have been largely exploited for fiber material microstructuration. Here we show that, for intensities slightly below the breakdown threshold, nonlinear absorption strongly affects the dynamics of a propagating beam as well. We experimentally analyze this sub-threshold regime, and highlight the key role played by spatial self-imaging in graded-index fibers for enhancing nonlinear optical losses. We characterize the nonlinear power transmission properties of multimode fibers for femtosecond pulses propagating in the near-infrared spectral range. We show that an effective N-photon absorption analytical model is able to describe well the experimental data.

physics.optics↗

arXiv2020

Spatiotemporal beam self-cleaning for high-resolution nonlinear fluorescence imaging with multimode fibres

Beam self-cleaning (BSC) in graded-index (GRIN) multimode fibres (MMFs) has been recently reported by different research groups. Driven by the interplay between Kerr effect and beam self-imaging, BSC counteracts random mode coupling, and forces laser beams to recover a quasi-single mode profile at the output of GRIN fibres. Here we show that the associated self-induced spatiotemporal reshaping allows for improving the performances of nonlinear fluorescence microscopy and endoscopy using multimode optical fibres. We experimentally demonstrate that the beam brightness increase, induced by self-cleaning, enables two and three-photon imaging of biological samples with high spatial resolution. Temporal pulse shortening accompanying spatial beam clean-up enhances the output peak power, hence the efficiency of nonlinear imaging. We also show that spatiotemporal supercontinuum generation is well-suited for large-band nonlinear fluorescence imaging in visible and infrared domains. We substantiated our findings by multiphoton fluorescence imaging in both microscopy and endoscopy configurations.

physics.optics↗

arXiv2020

Nonlinear beam self-imaging and self-focusing dynamics in a GRIN multimode optical fiber: theory and experiments

Beam self-imaging in nonlinear graded-index multimode optical fibers is of interest for many applications, such as implementing a fast saturable absorber mechanism in fiber lasers via multimode interference. We obtain an exact solution for the nonlinear evolution of first and second order moments of a laser beam carried by a graded-index multimode fiber, predicting that the spatial self-imaging period does not vary with power. Whereas the amplitude of the oscillation of the beam width is power-dependent. We have experimentally studied the longitudinal evolution of beam self-imaging by means of femtosecond laser pulse propagation in both the anomalous and the normal dispersion regime of a standard telecom graded-index multimode optical fiber. Light scattering out of the fiber core via visible fluorescence emission and harmonic wave generation permits us to directly confirm that the self-imaging period is invariant with power. Spatial shift and splitting of the self-imaging process under the action of self-focusing are also emphasized.

physics.optics↗