arXiv subjects

Mario Barbatti

Publications and source records attributed to Mario Barbatti.

11 recordsLinked to original sources

arXiv2026

Perspective on a challenge: predicting the photochemistry of cyclobutanone

This Perspective is part of a Special Topic that explored the maturity of nonadiabatic molecular dynamics for predicting photochemical processes. In 2023, a prediction challenge was issued to the community of computational photochemists to simulate the photochemistry of cyclobutanone, photoexcited at 200 nm, and the resulting time-resolved MeV-UED signal. The challenge attracted 15 theoretical predictions from more than 70 researchers, employing a wide range of strategies for electronic structure and nonadiabatic molecular dynamics to predict the time-resolved MeV-UED signal before the experiment had been conducted at SLAC (Stanford, USA). The MeV-UED instrument at Shanghai Jiao Tong University was also used to provide a second independent time-resolved MeV-UED signal for the photochemistry of cyclobutanone. This Perspective discusses the various approaches and strategies used by the participants to predict the photochemistry of cyclobutanone. This work also summarizes the strengths and weaknesses of various methods used for photoexcitation, electronic structure, nonadiabatic dynamics, and calculation of observables, as agreed by the participants during a CECAM workshop dedicated to the results of the challenge and organized in Lausanne in April 2025. This Perspective also collects all the predicted time-resolved MeV-UED signals into a single figure, together with the experimental signal. This challenge (i) demonstrated the qualitative predictive power of nonadiabatic molecular dynamics and (ii) underscore the impact of electronic-structure theory on the outcome of the excited-state dynamics and the need for its careful benchmarking. This effort allowed the community to share practical strategies to perform nonadiabatic dynamics (discussed in the present Perspective) and constitutes a 'calibration' exercise for computational photochemistry.

physics.chem-ph↗

arXiv2025

milearn: A Python Package for Multi-Instance Machine Learning

We introduce milearn, a Python package for multi-instance learning (MIL) that follows the familiar scikit-learn fit/predict interface while providing a unified framework for both classical and neural-network-based MIL algorithms for regression and classification. The package also includes built-in hyperparameter optimization designed specifically for small MIL datasets, enabling robust model selection in data-scarce scenarios. We demonstrate the versatility of milearn across a broad range of synthetic MIL benchmark datasets, including digit classification and regression, molecular property prediction, and protein-protein interaction (PPI) prediction. Special emphasis is placed on the key instance detection (KID) problem, for which the package provides dedicated support.

cs.LG↗

arXiv2025

The Quantum Measurement Problem: A Review of Recent Trends

Left on its own, a quantum state evolves deterministically under the Schrödinger Equation, forming superpositions. Upon measurement, however, a stochastic process governed by the Born rule collapses it to a single outcome. This dual evolution of quantum states -- the core of the Measurement Problem -- has puzzled physicists and philosophers for nearly a century. Yet, amid the cacophony of competing interpretations, the problem today is not as impenetrable as it once seemed. This paper reviews the current status of the Measurement Problem, distinguishing between what is well understood and what remains unresolved. We examine key theoretical approaches, including decoherence, many-worlds interpretation, objective collapse theories, hidden-variable theories, dualistic approaches, deterministic models, and epistemic interpretations. To make these discussions accessible to a broader audience, we also reference curated online resources that provide high-quality introductions to central concepts.

quant-ph↗

arXiv2025

Ehrenfest Dynamics with Spontaneous Localization

We propose Ehrenfest Dynamics with Spontaneous Localization (SLED), a decoherence-corrected extension of Ehrenfest dynamics based on the Gisin-Percival quantum-state diffusion (QSD) equation. In SLED, the electronic wavefunction evolves stochastically in the adiabatic energy basis, producing trajectory-level localization. The trajectory ensemble reproduces a Lindblad-type propagation of the reduced electronic density matrix. This approach ensures linearity, trace preservation, and complete positivity, providing a physically consistent alternative to ad hoc decoherence corrections commonly adopted in mixed quantum-classical methods. Benchmark simulations on one-dimensional Tully models and multidimensional spin-boson Hamiltonians demonstrate that SLED reproduces electronic populations and captures the essential features of coherence decay. The tests, however, also revealed that accurate treatment will require generalizing the localization kernel controlling the electron-nucleus coupling strength, from a constant into a function of time and phase space coordinates. SLED is implemented in the newly developed Skitten program and will be integrated into Newton-X. While the present work serves as a proof of concept, SLED establishes a rigorous and extensible framework that bridges mixed quantum-classical dynamics with open quantum system theory.

physics.chem-ph↗

arXiv2025

A simple approach to rotationally invariant machine learning of avector quantity

Unlike with the energy, which is a scalar property, machine learning (ML) predictions of vector or tensor properties poses the additional challenge of achieving proper invariance (covariance) with respect to molecular rotation. If the properties cannot be obtained by differentiation, other appropriate methods should be applied to retain the covariance. There have been several approaches suggested to properly treat this issue. For nonadiabatic couplings and polarizabilities, for example, it was possible to construct virtual quantities from which the above tensorial properties are obtained by differentiation and thus guarantee the covariance. Here we propose a simpler alternative technique, which does not require construction of auxiliary properties or application of special equivariant ML techniques. We suggest a three-step approach, using the molecular tensor of inertia. In the first step, the molecule is rotated using the eigenvectors of this tensor to its principal axes. In the second step, the ML procedure predicts the vector property relative to this orientation, based on a training set where all vector properties were in this same coordinate system. As third step, it remains to transform the ML estimate of the vector property back to the original orientation. This rotate-predict-rotate (RPR) procedure should thus guarantee proper covariance of a vector property and is trivially extensible also to tensors such as polarizability. The PRP procedure has an advantage that the accurate models can be trained very fast for thousands of molecular configurations which might be beneficial where many trainings are required (e.g., in active learning). We have implemented the RPR technique, using the MLatom and Newton-X programs for ML and MD and performed its assessment on the dipole moment along MD trajectories of 1,2-dichloroethane.

physics.chem-ph↗

arXiv2025

Roadmap for Molecular Benchmarks in Nonadiabatic Dynamics

Simulating the coupled electronic and nuclear response of a molecule to light excitation requires the application of nonadiabatic molecular dynamics. However, when faced with a specific photophysical or photochemical problem, selecting the most suitable theoretical approach from the wide array of available techniques is not a trivial task. The challenge is further complicated by the lack of systematic method comparisons and rigorous testing on realistic molecular systems. This absence of comprehensive molecular benchmarks remains a major obstacle to advances within the field of nonadiabatic molecular dynamics. A CECAM workshop, Standardizing Nonadiabatic Dynamics: Towards Common Benchmarks, was held in May 2024 to address this issue. This Perspective highlights the key challenges identified during the workshop in defining molecular benchmarks for nonadiabatic dynamics. Specifically, this work outlines some preliminary observations on essential components needed for simulations and proposes a roadmap aiming to establish, as an ultimate goal, a community-driven, standardized molecular benchmark set.

physics.chem-ph↗

arXiv2025

A Descriptor Is All You Need: Accurate Machine Learning of Nonadiabatic Coupling Vectors

Nonadiabatic couplings (NACs) play a crucial role in modeling photochemical and photophysical processes with methods such as the widely used fewest-switches surface hopping (FSSH). There is therefore a strong incentive to machine learn NACs for accelerating simulations. However, this is challenging due to NACs' vectorial, double-valued character and the singularity near a conical intersection seam. For the first time, we design NAC-specific descriptors based on our domain expertise and show that they allow learning NACs with never-before-reported accuracy of $R^2$ exceeding 0.99. The key to success is also our new ML phase-correction procedure. We demonstrate the efficiency and robustness of our approach on a prototypical example of fully ML-driven FSSH simulations of fulvene targeting the SA-2-CASSCF(6,6) electronic structure level. This ML-FSSH dynamics leads to an accurate description of $S_1$ decay while reducing error bars by allowing the execution of a large ensemble of trajectories. Our implementations are available in open-source MLatom.

physics.comp-ph↗

arXiv2024

MLatom software ecosystem for surface hopping dynamics in Python with quantum mechanical and machine learning methods

We present an open-source MLatom@XACS software ecosystem for on-the-fly surface hopping nonadiabatic dynamics based on the Landau-Zener-Belyaev-Lebedev (LZBL) algorithm. The dynamics can be performed via Python API with a wide range of quantum mechanical (QM) and machine learning (ML) methods, including ab initio QM (CASSCF and ADC(2)), semi-empirical QM methods (e.g., AM1, PM3, OMx, and ODMx), and many types of machine learning potentials (e.g., KREG, ANI, and MACE). Combinations of QM and ML methods can also be used. While the user can build their own combinations, we provide AIQM1, which is based on Δ-learning and can be used out of the box. We showcase how AIQM1 reproduces the isomerization quantum yield of trans-azobenzene at a low cost. We provide example scripts that, in a dozen lines, enable the user to obtain the final population plots by simply providing the initial geometry of a molecule. Thus, those scripts perform geometry optimization, normal mode calculations, initial condition sampling, parallel trajectories propagation, population analysis, and final result plotting. Given the capabilities of MLatom to be used for training different ML models, this ecosystem can be seamlessly integrated into the protocols building ML models for nonadiabatic dynamics. In the future, a deeper and more efficient integration of MLatom with Newton-X will enable vast range of functionalities for surface hopping dynamics, such as fewest-switches surface hopping, to facilitate similar workflows via the Python API.

physics.chem-ph↗

arXiv2024

Prediction Challenge: Simulating Rydberg Photoexcited Cyclobutanone with Surface Hopping Dynamics based on Different Electronic Structure Methods

This research examines the nonadiabatic dynamics of cyclobutanone after excitation into the n-3s Rydberg S2 state. It stems from our contribution to the Special Topic of the Journal of Chemical Physics to test the predictive capability of computational chemistry against unseen experimental data. Decoherence-corrected fewest-switches surface hopping (DC-FSSH) was used to simulate nonadiabatic dynamics with full and approximated nonadiabatic couplings. Several simulation sets were computed with different electronic structure methods, including a multiconfigurational wavefunction (MCSCF) specially built to describe dissociative channels, multireference semiempirical approach, time-dependent density functional theory, algebraic diagrammatic construction, and coupled cluster. MCSCF dynamics predicts a slow deactivation of the S2 state (10 ps), followed by an ultrafast population transfer from S1 to S0 (<100 fs). CO elimination (C3 channel) dominates C2H4 formation (C2 channel). These findings radically differ from the other methods, which predicted S2 lifetimes 10 to 250 times shorter and C2 channel predominance. These results suggest that routine electronic structure methods may hold low predictive power for the outcome of nonadiabatic dynamics.

physics.chem-ph↗

arXiv2023

MLatom 3: Platform for machine learning-enhanced computational chemistry simulations and workflows

Machine learning (ML) is increasingly becoming a common tool in computational chemistry. At the same time, the rapid development of ML methods requires a flexible software framework for designing custom workflows. MLatom 3 is a program package designed to leverage the power of ML to enhance typical computational chemistry simulations and to create complex workflows. This open-source package provides plenty of choice to the users who can run simulations with the command line options, input files, or with scripts using MLatom as a Python package, both on their computers and on the online XACS cloud computing at XACScloud.com. Computational chemists can calculate energies and thermochemical properties, optimize geometries, run molecular and quantum dynamics, and simulate (ro)vibrational, one-photon UV/vis absorption, and two-photon absorption spectra with ML, quantum mechanical, and combined models. The users can choose from an extensive library of methods containing pre-trained ML models and quantum mechanical approximations such as AIQM1 approaching coupled-cluster accuracy. The developers can build their own models using various ML algorithms. The great flexibility of MLatom is largely due to the extensive use of the interfaces to many state-of-the-art software packages and libraries.

physics.chem-ph↗

arXiv2022

Probing the electronic structure and photophysics of thiophene-diketopyrrolopyrrole derivatives in solution

Diketopyrrolopyrroles are a popular class of electron-withdrawing unit in optoelectronic materials. When combined with electron donating side-chain functional groups such as thiophenes, they form a very broad class of donor-acceptor molecules: thiophene-diketopyrrolopyrroles (TDPPs). Despite their widescale use in biosensors and photovoltaic materials, studies have yet to establish the important link between the electronic structure of the specific TDPP and the critical optical properties. To bridge this gap, ultrafast transient absorption with 22 fs time resolution has been used to explore the photophysics of three prototypical TDPP molecules: a monomer, dimer and polymer in solution. These studies show that the photophysics of these molecular prototypes under visible photoexcitation are determined by just two excited electronic states, having very different electronic characters (one is optically bright, the other dark), their relative energetic ordering and the timescales for internal conversion from one to the other and/or to the ground state. The underlying difference in electronic structure alters the branching between these excited states and their associated dynamics. In turn, these factors dictate the fluorescence quantum yields, which are shown to vary by ~1-2 orders of magnitude across the TDPP prototypes investigated here. The fast non-radiative transfer of molecules from the bright to dark states is mediated by conical intersections. Remarkably, wavepacket signals in the measured transient absorption data carry signatures of the nuclear motions that enable mixing of the electronic-nuclear wavefunction and facilitate non-adiabatic coupling between the bright and dark states.

physics.chem-ph↗