arXiv subjects

Maria Cameron

Publications and source records attributed to Maria Cameron.

17 recordsLinked to original sources

arXiv2026

Effects of Heterogeneity in Two-Cell Feedforward Networks

As the need for higher performance from biological and electronic sensors continues to outpace current technologies, new strategies for designing, developing, and implementing novel sensor systems are emerging. A recently introduced feedforward network-based approach can simultaneously enhance a signal while steering a radiating beam in radio frequency communication systems. Furthermore, the approach is also model-independent, thus making it suitable for other applications. In this work, we aim to understand the effects of inhomogeneities in feedforward arrays, which are inevitable in real-world implementations. We investigate a collection of two-cell feedforward networks composed of pitch-fork cells and Stuart-Landau oscillators and quantify the effects of parameter inhomogeneities using system reduction, analytical and computational bifurcation analyses, and a singularity theory approach. Contrary to common intuition, inhomogeneity in the excitation parameter can be exploited to enhance the network output growth rate. While frequency inhomogeneity in Stuart-Landau networks primarily has an adverse effect on signal amplification, phase locking persists over a surprisingly broad range of inhomogeneity.

math.DS↗

arXiv2025

FMint-SDE: A Multimodal Foundation Model for Accelerating Numerical Simulation of SDEs via Error Correction

Fast and accurate simulation of dynamical systems is a fundamental challenge across scientific and engineering domains. Traditional numerical integrators often face a trade-off between accuracy and computational efficiency, while existing neural network-based approaches typically require training a separate model for each case. To overcome these limitations, we introduce a novel multi-modal foundation model for large-scale simulations of differential equations: FMint-SDE (Foundation Model based on Initialization for stochastic differential equations). Based on a decoder-only transformer with in-context learning, FMint-SDE leverages numerical and textual modalities to learn a universal error-correction scheme. It is trained using prompted sequences of coarse solutions generated by conventional solvers, enabling broad generalization across diverse systems. We evaluate our models on a suite of challenging SDE benchmarks spanning applications in molecular dynamics, mechanical systems, finance, and biology. Experimental results show that our approach achieves a superior accuracy-efficiency tradeoff compared to classical solvers, underscoring the potential of FMint-SDE as a general-purpose simulation tool for dynamical systems.

cs.CE↗

arXiv2025

Learning collective variables that respect permutational symmetry

In addition to translational and rotational symmetries, clusters of identical interacting particles possess permutational symmetry. Coarse-grained models for such systems are instrumental in identifying metastable states, providing an effective description of their dynamics, and estimating transition rates. We propose a numerical framework for learning collective variables that respect translational, rotational, and permutational symmetries, and for estimating transition rates and residence times. It combines a sort-based featurization, residence manifold learning in the feature space, and learning collective variables with autoencoders whose loss function utilizes the orthogonality relationship (Legoll and Lelievre, 2010). The committor of the resulting reduced model is used as the reaction coordinate in the forward flux sampling and to design a control for sampling the transition path process. We offer two case studies, the Lennard-Jones-7 in 2D and the Lennard-Jones-8 in 3D. The transition rates and residence times computed with the aid of the reduced models agree with those obtained via brute-force methods.

physics.chem-ph↗

arXiv2024

Cyclic random graph models predicting giant molecules in hydrocarbon pyrolysis

Hydrocarbon pyrolysis is a complex chemical reaction system at extreme temperature and pressure conditions involving large numbers of chemical reactions and chemical species. Only two kinds of atoms are involved: carbons and hydrogens. Its effective description and predictions for new settings are challenging due to the complexity of the system and the high computational cost of generating data by molecular dynamics simulations. On the other hand, the ensemble of molecules present at any moment and the carbon skeletons of these molecules can be viewed as random graphs. Therefore, an adequate random graph model can predict molecular composition at a low computational cost. We propose a random graph model featuring disjoint loops and assortativity correction and a method for learning input distributions from molecular dynamics data. The model uses works of Karrer and Newman (2010) and Newman (2002) as building blocks. We demonstrate that the proposed model accurately predicts the size distribution for small molecules as well as the size distribution of the largest molecule in reaction systems at the pressure of 40.5 GPa, temperature range of 3200K-5000K, and H/C ratio range from 2.25 as in octane through 4 as in methane.

physics.chem-ph↗

arXiv2023

Sharp error estimates for target measure diffusion maps with applications to the committor problem

We obtain asymptotically sharp error estimates for the consistency error of the Target Measure Diffusion map (TMDmap) (Banisch et al. 2020), a variant of diffusion maps featuring importance sampling and hence allowing input data drawn from an arbitrary density. The derived error estimates include the bias error and the variance error. The resulting convergence rates are consistent with the approximation theory of graph Laplacians. The key novelty of our results lies in the explicit quantification of all the prefactors on leading-order terms. We also prove an error estimate for solutions of Dirichlet BVPs obtained using TMDmap, showing that the solution error is controlled by consistency error. We use these results to study an important application of TMDmap in the analysis of rare events in systems governed by overdamped Langevin dynamics using the framework of transition path theory (TPT). The cornerstone ingredient of TPT is the solution of the committor problem, a boundary value problem for the backward Kolmogorov PDE. Remarkably, we find that the TMDmap algorithm is particularly suited as a meshless solver to the committor problem due to the cancellation of several error terms in the prefactor formula. Furthermore, significant improvements in bias and variance errors occur when using a quasi-uniform sampling density. Our numerical experiments show that these improvements in accuracy are realizable in practice when using $\delta$-nets as spatially uniform inputs to the TMDmap algorithm.

math.NA↗

arXiv2023

Influence of Noise on a Rotating, Softening Cantilever Beam

An experimental arrangement and a set of experiments are developed to generate empirical evidence of the effect of noise on a rotating, macro-scale cantilever structure. The experiment is a controlled representation of a rotating machinery blade. Due to the nature of the nonlinear restoring forces acting on the cantilever structure, the structure's response includes regions of multi-stability and hysteresis. Here, a large number of trials are used to show that random perturbations can be used to create a transition between a high amplitude response and a low amplitude response of the cantilever. The observed transition behavior occurs from a high amplitude response to a low amplitude response, but not vice versa. Stochastic modeling of the system, Monte Carlo simulations, and calculations of the stochastic system's quasipotential are used to explain the nearly one-directional transition behavior. These noise-influenced transitions can also occur in other physical systems.

physics.app-ph↗

arXiv2023

Optimal control for sampling the transition path process and estimating rates

Many processes in nature such as conformal changes in biomolecules and clusters of interacting particles, genetic switches, mechanical or electromechanical oscillators with added noise, and many others are modeled using stochastic differential equations with small white noise. The study of rare transitions between metastable states in such systems is of great interest and importance. The direct simulation of rare transitions is difficult due to long waiting times. Transition path theory is a mathematical framework for the quantitative description of rare events. Its crucial component is the committor function, the solution to a boundary value problem for the backward Kolmogorov equation. The key fact exploited in this work is that the optimal controller constructed from the committor leads to the generation of transition trajectories exclusively. We prove this fact for a broad class of stochastic differential equations. Moreover, we demonstrate that the committor computed for a dimensionally reduced system and then lifted to the original phase space still allows us to construct an effective controller and estimate the transition rate with reasonable accuracy. Furthermore, we propose an all-the-way-through scheme for computing the committor via neural networks, sampling the transition trajectories, and estimating the transition rate without meshing the space. We apply the proposed methodology to four test problems: the overdamped Langevin dynamics with Mueller's potential and the rugged Mueller potential in 10D, the noisy bistable Duffing oscillator, and Lennard-Jones-7 in 2D.

math.OC↗

arXiv2022

Predicting Molecule Size Distribution in Hydrocarbon Pyrolysis using Random Graph Theory

Hydrocarbon pyrolysis is a complex process involving large numbers of chemical species and types of chemical reactions. Its quantitative description is important for planetary sciences, in particular, for understanding the processes occurring in the interior of icy planets, such as Uranus and Neptune, where small hydrocarbons are subjected to high temperature and pressure. We propose a computationally cheap methodology based on an originally developed ten-reaction model, and the configurational model from random graph theory. This methodology yields to accurate predictions for molecule size distributions for a variety of initial chemical compositions and temperatures ranging from 3200K to 5000K. Specifically, we show that the size distribution of small molecules is particularly well predicted, and the size of the largest molecule can be accurately predicted provided that it is not too large.

physics.atm-clus↗

arXiv2022

Most probable escape paths in periodically driven nonlinear oscillators

The dynamics of mechanical systems such as turbomachinery with multiple blades are often modeled by arrays of periodically driven coupled nonlinear oscillators. It is known that such systems may have multiple stable vibrational modes, and transitions between them may occur under the influence of random factors. A methodology for finding most probable escape paths and estimating the transition rates in the small noise limit is developed and applied to a collection of arrays of coupled monostable oscillators with cubic nonlinearity, small damping, and harmonic external forcing. The methodology is built upon the action plot method (Beri et al. 2005) and relies on the large deviation theory, optimal control theory, and the Floquet theory. The action plot method is promoted to non-autonomous high-dimensional systems, and a method for solving the arising optimization problem with discontinuous objective function restricted to a certain manifold is proposed. The most probable escape paths between stable vibrational modes in arrays of up to five oscillators and the corresponding quasipotential barriers are computed and visualized. The dependence of the quasipotential barrier on the parameters of the system is discussed.

nlin.CD↗

arXiv2021

An efficient jet marcher for computing the quasipotential for 2D SDEs

We present a new algorithm, the efficient jet marching method (EJM), for computing the quasipotential and its gradient for two-dimensional SDEs. The quasipotential is a potential-like function for nongradient SDEs that gives asymptotic estimates for the invariant probability measure, expected escape times from basins of attractors, and maximum likelihood escape paths. The quasipotential is a solution to an optimal control problem with an anisotropic cost function which can be solved for numerically via Dijkstra-like label-setting methods. Previous Dijkstra-like quasipotential solvers have displayed in general 1st order accuracy in the mesh spacing. However, by utilizing higher order interpolations of the quasipotential as well as more accurate approximations of the minimum action paths (MAPs), EJM achieves second-order accuracy for the quasipotential and nearly second-order for its gradient. Moreover, by using targeted search neighborhoods for the fastest characteristics following the ideas of Mirebeau, EJM also enjoys a reduction in computation time. This highly accurate solver enables us to compute the prefactor for the WKB approximation for the invariant probability measure and the Bouchet-Reygner sharp estimate for the expected escape time for the Maier-Stein SDE. Our codes are available on GitHub.

math.NA↗

arXiv2018

Computing the quasipotential for highly dissipative and chaotic SDEs. An application to stochastic Lorenz'63

The study of noise-driven transitions occurring rarely on the time-scale of systems modeled by SDEs is of crucial importance for understanding such phenomena as genetic switches in living organisms and magnetization switches of the Earth. For a gradient SDE, the predictions for transition times and paths between its metastable states are done using the potential function. For a nongradient SDE, one needs to decompose its forcing into a gradient of the so-called quasipotential and a rotational component, which cannot be done analytically in general. We propose a methodology for computing the quasipotential for highly dissipative and chaotic systems built on the example of Lorenz'63 with an added stochastic term. It is based on the ordered line integral method, a Dijkstra-like quasipotential solver, and combines 3D computations in whole regions, a dimensional reduction technique, and 2D computations on radial meshes on manifolds or their unions. Our collection of source codes is available on M. Cameron's web page and on GitHub.

math.DS↗

arXiv2018

An Ordered Line Integral Method for Computing the Quasi-potential in the case of Variable Anisotropic Diffusion

Nongradient stochastic differential equations (SDEs) with position-dependent and anisotropic diffusion are often used in biological modeling. The quasi-potential is a crucial function in the Large Deviation Theory that allows one to estimate transition rates between attractors of the corresponding ordinary differential equation and find the maximum likelihood transition paths. Unfortunately, the quasi-potential can rarely be found analytically. It is defined as the solution to a certain action minimization problem. In this work, the recently introduced Ordered Line Integral Method (OLIM) is extended for computing the quasi-potential for 2D SDEs with anisotropic and position-dependent diffusion scaled by a small parameter on a regular rectangular mesh. The presented solver employs the dynamical programming principle. At each step, a local action minimization problem is solved using straight line path segments and the midpoint quadrature rule. The solver is tested on two examples where analytic formulas for the quasi-potential are available. The dependence of the computational error on the mesh size, the update factor K (a key parameter of OLIMs), as well as the degree and the orientation of anisotropy is established. The effect of anisotropy on the quasi-potential and the maximum likelihood paths is demonstrated on the Maier-Stein model. The proposed solver is applied to find the quasi-potential and the maximum likelihood transition paths in a model of the genetic switch in Lambda Phage between the lysogenic state where the phage reproduces inside the infected cell without killing it, and the lytic state where the phage destroys the infected cell.

math.NA↗

arXiv2017

Ordered Line Integral Methods for Computing the Quasi-potential

The quasi-potential is a key function in the Large Deviation Theory. It characterizes the difficulty of the escape from the neighborhood of an attractor of a stochastic non-gradient dynamical system due to the influence of small white noise. It also gives an estimate of the invariant probability distribution in the neighborhood of the attractor up { to} the exponential order. We present a new family of methods for computing the quasi-potential on a regular mesh named the Ordered Line Integral Methods (OLIMs). In comparison with the first proposed quasi-potential finder based on the Ordered Upwind Method (OUM) (Cameron, 2012), the new methods are 1.5 to 4 times faster, can produce error two to three orders of magnitude smaller, and may exhibit faster convergence. Similar to the OUM, OLIMs employ the dynamical programming principle. Contrary to it, they (i) have an optimized strategy for the use of computationally expensive { triangle} updates leading to a notable speed-up, and (ii) directly solve local minimization problems using quadrature rules instead of solving the corresponding Hamilton-Jacobi-type equation by the first order finite difference upwind scheme. The OLIM with the right-hand quadrature rule is equivalent to OUM. The use of higher order quadrature rules in local minimization problems dramatically boosts up the accuracy of OLIMs. We offer a detailed discussion on the origin of numerical errors in OLIMs and propose rules-of-thumb for the choice of the important parameter, the update factor, in the OUM and OLIMs. Our results are supported by extensive numerical tests on two challenging 2D examples.

math.NA↗

arXiv2016

Modeling aggregation processes of Lennard-Jones particles via stochastic networks

We model an isothermal aggregation process of particles/atoms interacting according to the Lennard-Jones pair potential by mapping the energy landscapes of each cluster size $N$ onto stochastic networks, computing transition probabilities {from} the network for an $N$-particle cluster to the one for $N+1$, and connecting these networks into a single joint network. The attachment rate is a control parameter. The resulting network representing the aggregation of up to 14 particles contains {6427} vertices. It is not only time-irreversible but also reducible. To analyze its transient dynamics, we introduce the sequence of the expected initial and pre-attachment distributions and compute them for a wide range of attachment rates and three values of temperature. As a result, we find the {configurations most likely to be observed} in the process of aggregation for each cluster size. We examine the attachment process and conduct a structural analysis of the sets of local energy minima for every cluster size. We show that both processes taking place in the network, attachment and relaxation, lead to the dominance of icosahedral packing in small (up to 14 atom) clusters.

cond-mat.stat-mech↗

arXiv2016

A Graph-Algorithmic Approach for the Study of Metastability in Markov Chains

Large continuous-time Markov chains with exponentially small transition rates arise in modeling complex systems in physics, chemistry and biology. We propose a constructive graph-algorithmic approach to determine the sequence of critical timescales at which the qualitative behavior of a given Markov chain changes, and give an effective description of the dynamics on each of them. This approach is valid for both time-reversible and time-irreversible Markov processes, with or without symmetry. Central to this approach are two graph algorithms, Algorithm 1 and Algorithm 2, for obtaining the sequences of the critical timescales and the hierarchies of Typical Transition Graphs or T-graphs indicating the most likely transitions in the system {without and with} symmetry respectively. The sequence of {critical} timescales includes the subsequence of the reciprocals { of the real parts } of eigenvalues. Under a certain assumption, we prove sharp asymptotic estimates for eigenvalues (including prefactors) and show how one can extract them from the output of Algorithm 1. We discuss the relationship between Algorithms 1 and 2, and explain how one needs to interpret the output of Algorithm 1 if it is applied in the case with symmetry instead of Algorithm 2. Finally, we analyze an example motivated by R. D. Astumian's model of the dynamics of kinesin, a molecular motor, by means of Algorithm 2.

math.PR↗

arXiv2015

Spectral analysis and clustering of large stochastic networks. Application to the Lennard-Jones-75 cluster

We consider stochastic networks with pairwise transition rates of the exponential form where the temperature T is a small parameter. Such networks arise in physics and chemistry and serve as mathematically tractable models of complex systems. Typically, such networks contain large numbers of states and widely varying pairwise transition rates. We present a methodology for spectral analysis and clustering of such networks that takes advance of the small parameter T and consists of two steps: (1) computing zero-temperature asymptotics for eigenvalues and the collection of quasi-invariant sets, and (2) finite temperature continuation. Step (1) is re- ducible to a sequence of optimization problems on graphs. A novel single-sweep algorithm for solving them is introduced. Its mathematical justification is provided. This algorithm is valid for both time-reversible and time-irreversible networks. For time-reversible networks, a finite temperature continuation technique combining lumping and truncation with Rayleigh quotient iteration is developed. The proposed methodology is applied to the network representing the energy landscape of the Lennard-Jones-75 cluster containing 169,523 states and 226,377 edges. The transition process between its two major funnels, is analyzed. The corresponding eigenvalue is shown to have a kink at the solid-solid phase transition temperature.

cond-mat.stat-mech↗

arXiv2014

Flows in Complex Networks: Theory, Algorithms, and Application to Lennard-Jones Cluster Rearrangement

A set of analytical and computational tools based on transition path theory (TPT) is proposed to analyze flows in complex networks. Specifically, TPT is used to study the statistical properties of the reactive trajectories by which transitions occur between specific groups of nodes on the network. Sampling tools are built upon the outputs of TPT that allow to generate these reactive trajectories directly, or even transition paths that travel from one group of nodes to the other without making any detour and carry the same probability current as the reactive trajectories. These objects permit to characterize the mechanism of the transitions, for example by quantifying the width of the tubes by which these transitions occur, the location and distribution of their dynamical bottlenecks, etc. These tools are applied to a network modeling the dynamics of the Lennard-Jones cluster with 38 atoms (LJ38) and used to understand the mechanism by which this cluster rearranges itself between its two most likely states at various temperatures.

cond-mat.stat-mech↗