arXiv subjects

Marcus Scheele

Publications and source records attributed to Marcus Scheele.

At least 19 recordsLinked to original sources

arXiv2026

Intercalation of Alkali Metal into WTe2, the Crystal Structure of A0.5WTe2 and Observation of a Metal-to-Semiconductor Transition

We explore the cationic intercalation of tungsten ditelluride (WTe2) with potassium (K), rubidium (Rb), and cesium (Cs), yielding intercalation compounds of the form A0.5WTe2 (A = K, Rb, Cs). Structural characterization was performed using powder X-ray diffraction (PXRD), while diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy and temperature-dependent conductivity measurements were employed to investigate the electronic properties. Density functional theory (DFT) calculations were carried out to support the experimental findings and to provide insight into the intercalation mechanisms and the resulting material characteristics. All synthesized compounds display semiconducting behavior with narrow band gaps, emphasizing the influence of alkali metal intercalation on the electronic structure and transport properties of WTe2. These results advance the fundamental understanding of property modulation in transition-metal dichalcogenides (TMDCs) and highlight their potential for electronic device applications.

cond-mat.mtrl-sci↗

arXiv2026

Zero Indirect Band Gap and Flat Bands in a Niobium Oxyiodide Cluster Material

Explorative chemistry in a reaction system composed of NbI$_4$, Li$_2$(CN$_2$), and Li$_2$O has led to the discovery of a number of niobium oxyiodide cluster compounds. During this reaction, the formation of solid phases was detected alongside with gaseous phases, resulting in a range of products with cluster cores of varying shapes. After several niobium oxyiodide cluster compounds have already been identified within this reaction system, two additional compounds, Nb$_6$O$_3$I$_{15}$ and Nb$_{11}$O$_6$I$_{24}$, are discovered and structurally characterized by single-crystal X-ray diffraction. Both structures are based on the butterfly-shaped, oxygen-capped niobium cluster [Nb$_4$O], which is extended to larger cluster fragments. The [Nb$_4$O] cluster core in Nb$_6$O$_3$I$_{15}$is extended by two [NbO] units to form a three-dimensional framework, and Nb$_{11}$O$_6$I$_{24}$ contains two connected [Nb$_4$O] units, which form chiral units within an antiferrochiral hexagonal packing of strings. The striking string-like character of Nb$_{11}$O$_6$I$_{24}$ was investigated in terms of its electronic structure and properties. DFT calculations showed Nb$_{11}$O$_6$I$_{24}$ to possess a zero indirect band gap, with a pair of 3-dimensional flat bands surrounding the Fermi level. These unusual features of the electronic band structure suggest the presence of strongly correlated inter-cluster singlet electron states, arising from the helical shape of the clusters, the hexagonal packing of the strings, and the delocalized nature of cluster electron wavefunctions.

cond-mat.str-el↗

arXiv2025

Optimizing carrier balance in CsPbBr3 nanocrystal LEDs: The role of alkyl ligands and polar electron transport layers

The study of lead halide perovskite nanocrystal based light-emitting diodes (LEDs) has advanced significantly, with notable improvements in stability and optical properties. However, optimizing charge carrier injection and transport remains a challenge. Efficient electroluminescence requires a balanced transport of both holes and electrons within the emitting material. Here, we investigate cubic CsPbBr\textsubscript{3} nanocrystals passivated with oleylamine and oleic acid, comparing them to ligand-exchanged nanocrystals with didodecyldimethylammonium bromide (DDABr). Nuclear magnetic resonance spectroscopy and transmission electron microscopy confirm successful ligand exchange, revealing reduced ligand coverage in DDABr-treated nanocrystals. Photoelectron spectroscopy, spectroelectrochemistry, and single-carrier devices indicate improved hole injection in DDABr-capped nanocrystals. Density functional theory calculations further reveal the influence of ligand type and coverage on energy levels, with oleic acid introducing localized states in native nanocrystals. Additionally, incorporation of a polar electron transport layer (ETL) enhances LED performance by over an order of magnitude in DDABr-capped nanocrystals, driven by improved charge balance arising from the spontaneous orientation polarization (SOP) of the ETL. These findings highlight the critical role of ligand selection, passivation degree, and charge transport control by the adjacent organic transport layers in optimizing LED efficiency.

cond-mat.mtrl-sci↗

arXiv2024

Electronic Structure and Transport in the Potential Luttinger Liquids CsNb$_3$Br$_7$S and RbNb$_3$Br$_7$S

The crystal structures of ANb$_3$Br$_7$S (A = Rb and Cs) have been refined by single crystal X-ray diffraction, and are found to form highly anisotropic materials based on chains of the triangular Nb$_3$ cluster core. The Nb$_3$ cluster core contains seven valence electrons, six of them being assigned to Nb-Nb bonds within the Nb$_3$ triangle and one unpaired d electron. The presence of this surplus electron gives rise to the formation of correlated electronic states. The connectivity in the structures is represented by one-dimensional [Nb$_3$Br$_7$S]$^-$ chains, containing a sulphur atom capping one face ($\mu_3$) of the triangular niobium cluster, which is believed to induce an important electronic feature. Several types of studies are undertaken to obtain deeper insight into the understanding of this unusual type of material: the crystal structure, morphology and elastic properties are analysed, as well the (photo-) electrical properties and NMR relaxation. Electronic structure (DFT) calculations are performed in order to understand the electronic structure and transport in these compounds, and, based on the experimental and theoretical results, we propose that the electronic interactions along the Nb chains are sufficiently one-dimensional to give rise to Luttinger liquid (rather than Fermi liquid) behaviour of the metallic electrons.

cond-mat.str-el↗

arXiv2022

Pitfalls in Determining the Electrical Bandwidth of Non-Ideal Nanomaterials for Photodetection

The electrical 3 dB bandwidth is regularly used as a measure for the response speed of a photodetector and is estimated via various approaches in literature, ranging from direct measurements to gauged values via approximations. Great care must be taken when comparing these 3 dB bandwidths, since approximations are only strictly valid for ideal circuits. This paper demonstrates that, for typical photodetectors based on new emerging nanostructured materials, namely quantum dots and transition metal dichalcogenides, the bandwidth can deviate up to 10^3 depending on the chosen approach for the bandwidth specification.

cond-mat.mtrl-sci↗

arXiv2022

Substrate Effects on the Speed Limiting Factor of WSe$_2$ Photodetectors

We investigate the time-resolved photoelectric response of WSe$_2$ crystals on common glass and flexible polyimide substrates to determine the effect of the dielectric environment on the speed of the photodetectors. We show that varying the substrate material can alter the speed-limiting mechanism: while the detectors on polyimide are RC limited, those on glass are limited by slower excitonic diffusion processes. We attribute this to a shortening of the depletion layer at the metal electrode/WSe2 interface caused by the higher dielectric screening of glass compared to polyimide. The photodetectors on glass show a tunable bandwidth which can be increased to 2.6 MHz with increasing the electric field.

cond-mat.mtrl-sci↗

arXiv2022

Emergent properties in supercrystals of atomically precise nanocluster and colloidal nanocrystals

We provide a comprehensive account of the optical, electrical and mechanical properties that emerge from the self-assembly of colloidal nanocrystals or atomically precise nanoclusters into crystalline arrays with long-range order. We compare the correlation between the supercrystalline structure and these emergent properties with similar correlations in crystals of atoms to address the hypothesis that nanocrystals and nanoclusters exhibit quasi-atomic behaviour. We come to the conclusion that, effectively, this analogy is indeed justified, although the chemical origin for the same emergent properties are substantially different in crystals of atoms vs. supercrystals. We provide an outlook onto the most promising applications of supercrystals of nanocrystals and nanoclusters and discuss the challenges to be overcome before their commercialization.

cond-mat.mtrl-sci↗

arXiv2022

Quantum Efficiency Enhancement of Lead-Halide Perovskite Nanocrystal LEDs by Organic Lithium Salt Treatment

Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance cation vacancies, while, on the other side, the excess halides are believed to stabilise the colloids. Here, we report an organic lithium salt, viz. LiTFSI, as a halide-free surface passivation on perovskite nanocrystals. We show that the treatment LiTFSI has multiple beneficial effects on lead halide perovskite nanocrystals and LEDs derived from them. We obtain higher photoluminescence quantum yield and longer exciton lifetime, and a radiation pattern that is more favourable for light outcoupling. The ligand-induced dipoles on the nanocrystal surface shift their energy levels toward lower hole-injection barrier. Overall, these effects add up to a four- to seven-fold boost of the external quantum efficiency in proof-of-concept LED structures, depending on the color of the used lead halide perovskite nanocrystal emitters.

physics.app-ph↗

arXiv2021

Sub-ns intrinsic response time of PbS nanocrystal IR-photodetectors

Colloidal nanocrystals (NCs), especially lead sulfide NCs, are promising candidates for solution-processed next-generation photodetectors with high-speed operation frequencies. However, the intrinsic response time of PbS-NC photodetectors, which is the material-specific physical limit, is still elusive, as the reported response times are typically limited by the device geometry. Here, we use the two-pulse coincidence photoresponse technique to identify the intrinsic response time of 1,2-ethanedithiol-functionalized PbS-NC photodetectors after fs-pulsed 1560 nm excitation. We obtain an intrinsic response time of ~1 ns, indicating an intrinsic bandwidth of ~0.55 GHz as the material-specific limit. Examination of the dependence on laser power, gating, bias, temperature, channel length and environmental conditions suggest that Auger recombination, assisted by NC-surface defects, is the dominant mechanism. Accordingly, the intrinsic response time might further be tuned by specifically controlling the ligand coverage and trap states. Thus, PbS-NC photodetectors are feasible for gigahertz optical communication in the third telecommunication window.

cond-mat.mtrl-sci↗

arXiv2021

Impact of the Ligand Shell on Structural Changes and Decomposition of All-Inorganic Mixed-Halide Perovskite (CsPbX3) Nanocrystals under X-Ray Illumination

We show that the decomposition of caesium lead halide perovskite nanocrystals under continuous X-ray illumination depends on the surface ligand. For oleic acid/oleylamine, we observe a fast decay accompanied by the formation of elemental lead and halogen. Upon surface functionalization with a metal porphyrin derivate, the decay is markedly slower and involves the disproportionation of lead to Pb0 and Pb3+. In both cases, the decomposition is preceded by a contraction of the atomic lattice, which appears to initiate the decay. We find that the metal porphyrin derivative induces a strong surface dipole on the nanocrystals, which we hold responsible for the altered and slower decomposition pathway. These results are important for application of lead halide perovskite nanocrystals in X-ray scintillators.

cond-mat.mtrl-sci↗

arXiv2021

Porphyrin-functionalization of CsPbBrI$_{2}$/SiO$_{2}$ core-shell nanocrystals enhances the stability and efficiency in electroluminescent devices

Surface ligand exchange on all-inorganic perovskite nanocrystals of composition CsPbBrI$_{2}$ reveals improved optoelectronic properties due to strong interactions of the nanocrystal with mono-functionalized porphyrin derivatives. The interaction is verified experimentally with an array of spectroscopic measurements as well as computationally by exploiting density functional theory calculations. The enhanced current efficiency is attributed to a lowering of the charging energy by a factor of 2 to 3, which is determined by combining electronic and optical measurements on a selection of ligands. The coupled organic-inorganic nanostructures are successfully deployed in a light emitting device with higher current efficacy and improved charge carrier balance, magnifying the efficiency almost fivefold compared to the native ligand.

physics.app-ph↗

arXiv2021

Spatially resolved fluorescence of caesium lead halide perovskite supercrystals reveals quasi-atomic behavior of nanocrystals

We correlate spatially resolved fluorescence (-lifetime) measurements with X-ray nanodiffraction to reveal surface defects in supercrystals of self-assembled caesium lead halide perovskite nanocrystals and study their effect on the fluorescence properties. Upon comparison with density functional modelling, we show that a loss in structural coherence, an increasing atomic misalignment between adjacent nanocrystals, and growing compressive strain near the surface of the supercrystal are responsible for the observed fluorescence blueshift and decreased fluorescence lifetimes. Such surface defect-related optical properties extend the frequently assumed analogy between atoms and nanocrystals as so-called quasi-atoms. Our results emphasize the importance of minimizing strain during the self-assembly of perovskite nanocrystals into supercrystals for lighting application such as superfluorescent emitters.

cond-mat.mtrl-sci↗

arXiv2021

Substrate Effects on the Bandwidth of CdSe Quantum Dot Photodetectors

We investigate the time-resolved photocurrent response of CdSe quantum dot (QD) thin films sensitized with zinc beta-tetraaminophthalocyanine (Zn4APc) on three different substrates, namely silicon with 230 nm SiO2 dielectric, glass as well as polyimide. While Si/SiO2(230 nm) is not suitable for any transient photocurrent characterization due to an interfering photocurrent response of the buried silicon, we find that polyimide substrates invoke the larger optical bandwidth with 85 kHz vs. 67 kHz for the same quantum dot thin film on glass. Upon evaluation of the transient photocurrent, we find that the photoresponse of the CdSe quantum dot films can be described as a combination of carrier recombination and fast trapping within 2.7 ns, followed by slower multiple trapping events. The latter are less pronounced on polyimide, which leads to the higher bandwidth. We show that all devices are RC-time limited and that improvements of the photoresistance are the key to further increasing the bandwidth.

cond-mat.mes-hall↗

arXiv2020

Fabrication of nanocrystal superlattice microchannels by soft-lithography for electronic measurements of single crystalline domains

We report a high-throughput and easy-to-implement approach to fabricate microchannels of nanocrystal superlattices with dimensions of ~4 micrometer^2, thus approaching the size of typical single-crystalline domains. By means of microcontact printing, highly ordered superlattices with microscale dimensions are transferred onto photolithographically prepatterned microelectrodes, obtaining well-defined superlattice microchannels. We present step-by-step guidelines for microfabrication, nanocrystal self-assembly and patterning to archive large quantities of up to 330 microchannels per device for statistically meaningful investigations of charge transport in single-crystalline superlattice domains. As proof-of-concept, we perform conductivity and field-effect transistor measurements on microchannels of PbS nanocrystal superlattices. We find that the electric transport within microchannel superlattices is orders of magnitude more efficient than within conventional large-scale channels, highlighting the advantage of the near single-crystalline microchannels presented in this paper.

physics.app-ph↗

arXiv2020

Periodic Fluorescence Variations of CdSe Quantum Dots Coupled to Aryleneethynylenes with Aggregation Induced Emission

CdSe nanocrystals and aggregates of an aryleneethynylene derivative are assembled into a hybrid thin film with dual fluorescence from both fluorophores. Under continuous excitation, the nanocrystals and the molecules exhibit anti-correlated fluorescence intensity variations, which become periodic at low temperature. We attribute this to a structure-dependent aggregation induced emission of the aryleneethynylene derivative, which impacts the rate of excitation energy transfer between the molecules and nanocrystals. Energy transfer also affects the electric transport properties of the hybrid material under optical excitation. This work highlights that combining semiconductor nanocrystals with molecular aggregates, which exhibit aggregation induced emission, can result in unprecedented emerging optical properties.

physics.app-ph↗

arXiv2020

A Neutron Scattering Perspective on the Structure, Softness and Dynamics of the Ligand Shell of PbS Nanocrystals in Solution

Small-angle neutron and X-ray scattering, neutron backscattering and neutron time-of-flight spectroscopy are applied to reveal the structure of the ligand shell, the temperature-dependent diffusion properties and the phonon spectrum of PbS nanocrystals functionalized with oleic acid in deuterated hexane. The nanocrystals decorated with oleic acid as well as the desorbed ligand molecules exhibit simple Brownian diffusion with a Stokes-Einstein temperature-dependence and inhibited freezing. Ligand molecules desorbed from the surface show strong spatial confinement. The phonon spectrum of oleic acid adsorbed to the nanocrystal surface exhibits hybrid modes with a predominant Pb-character. Low-energy surface modes of the NCs are prominent and indicate a large mechanical softness in solution. This work provides comprehensive insights into the ligand-particle interaction of colloidal nanocrystals in solution and highlights its effect on the diffusion and vibrational properties as well as their mechanical softness.

cond-mat.mtrl-sci↗

arXiv2020

Structure-transport correlation reveals anisotropic charge transport in coupled PbS nanocrystal superlattices

Semiconductive nanocrystals (NCs) can be self-assembled into ordered superlattices (SLs) to create artificial solids with emerging collective properties. Computational studies have predicted that properties such as electronic coupling or charge transport are determined not only by the individual NCs but also by the degree of their organization and structure. However, experimental proof for a correlation between structure and charge transport in NC SLs is still pending. Here, we perform X-ray nano-diffraction and apply Angular X-ray Cross-Correlation Analysis (AXCCA) to characterize the structures of coupled PbS NC SLs, which are directly correlated with the electronic properties of the same SL microdomains. We find strong evidence for the effect of SL crystallinity on charge transport and reveal anisotropic charge transport in highly ordered monocrystalline hexagonal close-packed PbS NC SLs, caused by the dominant effect of shortest interparticle distance. This implies that transport anisotropy should be a general feature of weakly coupled NC SLs.

cond-mat.mtrl-sci↗

arXiv2020

Structural order matters: Enhanced electronic coupling in self assembled micro-crystals of Au-nanoclusters

We report an easy and broadly applicable method for the controlled self-assembly of atomically precise Au32(nBu3P)12Cl8 nanoclusters into micro-crystals. This enables the determination of emergent optoelectronic properties resulting from long-range order in such assemblies. Compared to the same nanoclusters in glassy, polycrystalline ensembles, we find a 100-fold increase in the electric conductivity and charge carrier mobility as well as additional optical transitions. We show that these effects are due to a vanishing energetic disorder and a drastically reduced activation energy to charge transport in the highly ordered assemblies. This first structure-transport correlation on self-assembled superstructures of atomically precise gold nanoclusters paves the way towards functional materials with novel collective optoelectronic properties.

cond-mat.mes-hall↗