arXiv subjects

Marcus Rommel

Publications and source records attributed to Marcus Rommel.

16 recordsLinked to original sources

arXiv2026

Learning Lindblad Dynamics of a Superconducting Quantum Processor

Accurate models of quantum processors are essential for understanding, calibrating, and improving their performance. In practice, model construction must balance physical detail against the experimental and computational effort required to reliably learn parameters. Compact descriptions therefore often rely on assumptions about which interactions, noise processes, or hidden degrees of freedom are relevant. Here we introduce LIMINAL, a data-driven framework for testing such assumptions and selecting minimal adequate Lindblad models. LIMINAL fits nested candidate models to time-resolved tomographic data and uses likelihood-ratio tests to decide when added physical mechanisms are warranted. We apply LIMINAL to a five-qubit superconducting processor, identifying an idling model with three-local Hamiltonian terms and two-local dissipation, while finding no support for three-local dissipation. We further apply it to recover driven single-qubit Hamiltonians, reconstruct a shaped-pulse Hamiltonian without assuming an analytic pulse model, and test hidden-qubit extensions in coupler-mediated dynamics, demonstrating the applicability of the framework for a wide range of tasks.

quant-ph↗

arXiv2026

Electrical post-fabrication tuning of aluminum Josephson junctions at room temperature

Josephson junctions are key elements of superconducting quantum technology, serving as the core building blocks of superconducting qubits. We present an experimental study on room-temperature electrical tuning of aluminum junctions, showing that voltage pulses can controllably increase their resistance and adjust the Josephson energy while maintaining qubit quality factors above 1 million. We find that the rate of resistance increase scales exponentially with pulse amplitude during manipulation. Following the manipulation, the resistance increases spontaneously through contributions proportional to both the initial resistance and the preceding manipulation. We show that this spontaneous increase halts at cryogenic temperatures, and resumes again at room temperature. Using our stepwise protocol, we achieve up to a 270% increase in junction resistance, corresponding to a reduction of nearly 2 GHz of the qubit transition frequency. These results establish the achievable range, relaxation behavior, and practical limits of electrical tuning, enabling post-fabrication mitigation of frequency crowding in quantum processors.

quant-ph↗

arXiv2026

Demonstrating and Benchmarking Classical Shadows for Lindblad Tomography

Spurious couplings and decoherence degrade the performance of solid-state quantum processors, demanding careful design, calibration, and mitigation protocols. These strategies often rely on characterization of the idling processor, but tomographic recovery of (time-independent) Lindblad dynamics scales exponentially with qubit count. Here, we experimentally benchmark and demonstrate that randomized ("shadow") measurements accelerate Lindblad tomography on a superconducting transmon processor. We first implement extensible Lindblad tomography, which estimates Lindblad parameters using a complete tomographic dataset, and use it as a baseline to benchmark a shadow tomography approach, shadow Lindblad tomography. The shadow approach recycles randomized configurations to estimate the same Lindblad parameters using far fewer resources under physically motivated locality assumptions. We experimentally verify these assumptions in our processor by implementing the protocols on one- and three-qubit subsystems; here, shadow Lindblad tomography reproduces extensible Lindblad tomography within uncertainties while using exponentially fewer configurations. Leveraging this efficiency, we apply shadow Lindblad tomography to the full five-qubit processor and recover all single qubit dissipation and two-qubit coupling parameters in 9 hours of acquisition time compared to an estimated 58 hours for extensible Lindblad tomography. Additionally, our shadow implementation is compatible with conventional Gaussian error propagation, avoiding the use of median-of-means estimators. Together, these results demonstrate how randomized shadow tomography protocols can be practically implemented to learn quantum processor dynamics at an increasing qubit count.

quant-ph↗

arXiv2025

Real-time adaptive tracking of fluctuating relaxation rates in superconducting qubits

The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by two orders of magnitude using a field-programmable gate-array (FPGA) powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, four orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.

quant-ph↗

arXiv2025

Quantum Process Tomography with Digital Twins of Error Matrices

Accurate and robust quantum process tomography (QPT) is crucial for verifying quantum gates and diagnosing implementation faults in experiments aimed at building universal quantum computers. However, the reliability of QPT protocols is often compromised by faulty probes, particularly state preparation and measurement (SPAM) errors, which introduce fundamental inconsistencies in traditional QPT algorithms. We propose and investigate enhanced QPT for multi-qubit systems by integrating the error matrix in a digital twin of the identity process matrix, enabling statistical refinement of SPAM error learning and improving QPT precision. Through numerical simulations, we demonstrate that our approach enables highly accurate and faithful process characterization. We further validate our method experimentally using superconducting quantum gates, achieving at least an order-of-magnitude fidelity improvement over standard QPT. Our results provide a practical and precise method for assessing quantum gate fidelity and enhancing QPT on a given hardware.

quant-ph↗

arXiv2025

Neural-network-based design and implementation of fast and robust quantum gates

We present a continuous-time, neural-network-based approach to optimal control in quantum systems, with a focus on pulse engineering for quantum gates. Leveraging the framework of neural ordinary differential equations, we construct control fields as outputs of trainable neural networks, thereby eliminating the need for discrete parametrization or predefined bases. This allows for generation of smooth, hardware-agnostic pulses that can be optimized directly using differentiable integrators. As a case study we design, and implement experimentally, a short and detuning-robust $\pi/2$ pulse for photon parity measurements in superconducting transmon circuits. This is achieved through simultaneous optimization for robustness and suppressing the leakage outside of the computational basis. These pulses maintain a fidelity greater than $99.9\%$ over a detuning range of $\approx \pm 20\mathrm{MHz}$, thereby outperforming traditional techniques while retaining comparable gate durations. This showcases its potential for high-performance quantum control in experimentally relevant settings.

quant-ph↗

arXiv2025

Mitigating transients in flux-control signals in a superconducting quantum processor

Flux-tunable qubits and couplers are common components in superconducting quantum processors. However, dynamically controlling these elements via current pulses poses challenges due to distortions and transients in the propagating signals. In particular, long-time transients can persist, adversely affecting subsequent qubit control operations. We model the flux control line as a first-order RC circuit and introduce a class of pulses designed to mitigate long-time transients. We theoretically demonstrate the robustness of these pulses against parameter mischaracterization and provide experimental evidence of their effectiveness in mitigating transients when applied to a flux-tunable qubit coupler. The proposed pulse design offers a practical solution for mitigating long-time transients, enabling efficient and reliable experiment tune-ups without requiring detailed flux line characterization.

quant-ph↗

arXiv2024

Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture

It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during compilation as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform's native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates.

quant-ph↗

arXiv2024

Fast unconditional reset and leakage reduction in fixed-frequency transmon qubits

The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers -- an architecture that is compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum computers.

quant-ph↗

arXiv2024

Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging

We systematically investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators with internal quality factors ($Q_i$) of about one million at the single-photon level. These devices are essential components in superconducting quantum processors; they also serve as proxies for understanding the energy loss of superconducting qubits. By systematically varying several fabrication steps, we identify the relative importance of reducing loss at the substrate-metal and the substrate-air interfaces. We find that it is essential to clean the silicon substrate in hydrogen fluoride (HF) prior to aluminum deposition. A post-fabrication removal of the oxides on the surface of the silicon substrate and the aluminum film by immersion in HF further improves the $Q_i$. We observe a small, but noticeable, adverse effect on the loss by omitting either standard cleaning (SC1), pre-deposition heating of the substrate to 300$\deg$C, or in-situ post-deposition oxidation of the film's top surface. We find no improvement due to excessive pumping meant to reach a background pressure below $6{\times} 10^{-8}$ mbar. We correlate the measured loss with microscopic properties of the substrate-metal interface through characterization with X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectroscopy (ToF-SIMS), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM).

quant-ph↗

arXiv2024

Signal crosstalk in a flip-chip quantum processor

Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors.

quant-ph↗

arXiv2023

Mitigation of interfacial dielectric loss in aluminum-on-silicon superconducting qubits

We demonstrate aluminum-on-silicon planar transmon qubits with time-averaged ${T_1}$ energy relaxation times of up to ${270\,\mu s}$, corresponding to Q = 5 million, and a highest observed value of ${501\,\mu s}$. We use materials analysis techniques and numerical simulations to investigate the dominant sources of energy loss, and devise and demonstrate a strategy towards mitigating them. The mitigation of loss is achieved by reducing the presence of oxide, a known host of defects, near the substrate-metal interface, by growing aluminum films thicker than 300 nm. A loss analysis of coplanar-waveguide resonators shows that the improvement is owing to a reduction of dielectric loss due to two-level system defects. We perform time-of-flight secondary ion mass spectrometry and observe a reduced presence of oxygen at the substrate-metal interface for the thicker films. The correlation between the enhanced performance and the film thickness is due to the tendency of aluminum to grow in columnar structures of parallel grain boundaries, where the size of the grain depends on the film thickness: transmission electron microscopy imaging shows that the thicker film has larger grains and consequently fewer grain boundaries containing oxide near this interface. These conclusions are supported by numerical simulations of the different loss contributions in the device.

quant-ph↗

arXiv2023

Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures

In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.

quant-ph↗

arXiv2022

Three-wave mixing traveling-wave parametric amplifier with periodic variation of the circuit parameters

We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stop-band at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon.

quant-ph↗

arXiv2022

Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier

High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier.

quant-ph↗

arXiv2021

Building Blocks of a Flip-Chip Integrated Superconducting Quantum Processor

We have integrated single and coupled superconducting transmon qubits into flip-chip modules. Each module consists of two chips -- one quantum chip and one control chip -- that are bump-bonded together. We demonstrate time-averaged coherence times exceeding $90\,\mu s$, single-qubit gate fidelities exceeding $99.9\%$, and two-qubit gate fidelities above $98.6\%$. We also present device design methods and discuss the sensitivity of device parameters to variation in interchip spacing. Notably, the additional flip-chip fabrication steps do not degrade the qubit performance compared to our baseline state-of-the-art in single-chip, planar circuits. This integration technique can be extended to the realisation of quantum processors accommodating hundreds of qubits in one module as it offers adequate input/output wiring access to all qubits and couplers.

quant-ph↗