arXiv Science⌕ Search

arXiv subjects

Marcos Netto

Publications and source records attributed to Marcos Netto.

At least 19 recordsLinked to original sources

A Hybrid Systems Approach to Parameterizing the PERC1 Model for Data Centers Using Synchrophasor Measurements

The Power Electronic Reconnecting and Ceasing (PERC1) load model represents the timed ceasing and reconnection of large power-electronic loads, including data centers. Voltage thresholds and timers govern its response, with a ramp on reconnection, making it a hybrid dynamical system. This paper formulates PERC1 as a hybrid automaton and uses that structure to identify its parameters from synchrophasor records of grid disturbances. We propose a four-stage identification procedure: mode-sequence identification, estimation of logic parameters from event-time constraints, and joint Gauss-Newton refinement using hybrid trajectory sensitivities and saltation matrices. The resulting salted Fisher information is then used to analyze parameter identifiability. Two structural results are established. The detection and actuation delays are identifiable only through their sum unless a second dip interrupts the reconnection ramp, and a single disturbance leaves one unidentifiable direction in each threshold-delay pair, which two disturbances with different voltage slopes resolve. A case study using synthetic 60 frames/s synchrophasor records demonstrates recovery of the ceasing and reconnection dynamics and identifies poorly observable parameters.

eess.SY↗

Learn Locally, Extend Globally: Koopman Eigenfunctions and the Basin of Attraction

Koopman eigenfunctions associated with the Jacobian eigenvalues of a stable equilibrium are Lyapunov functions defined exactly on its basin of attraction. We turn this into a computational procedure for power systems. Eigenfunctions estimated by extended dynamic mode decomposition (EDMD) are written as functions of the state, made to vanish at the equilibrium by centering the lifted variable $\cosδ$, and verified on a grid with the model: two Lyapunov candidates from the EDMD spectrum certify up to 66\% of the basin of a single-machine infinite-bus system from data in the linear region. The Koopman semigroup property then extends the EDMD-Lie eigenfunction to the whole basin, recovered at the grid resolution with its isostables and isochrons.

eess.SY↗

Beyond Yes or No: Grading Observability of Power System Dynamic States with Symbolic Coefficients

Graph-based observability analysis runs in seconds where Lie-derivative tests take hours, but it answers only one question: is the system observable or not. It cannot say how well a given set of measurements supports state reconstruction. This paper extends the graph-based approach with symbolic observability coefficients computed from a symbolic Jacobian of the state-space equations, in which every dependency is classified as constant, nonlinear polynomial, or rational. We show that the coefficient tracks the analytical observability determinant of the Lie-derivative approach: it is zero when the determinant vanishes, lies strictly between zero and one when the determinant depends on the state, and equals one when the determinant is a nonzero constant. We apply the method to a seven-state synchronous machine and to the 21-state Western System Coordinating Council nine-bus system under several synchrophasor measurement configurations. On the nine-bus system, the coefficient grows from 0.0952 with one PMU to 0.1905 with two and 0.2857 with three, and the whole analysis runs in under five seconds. Configurations with the same number of PMUs receive the same coefficient, yet an unscented Kalman filter estimates the states with different accuracy for each. The symbolic coefficient therefore grades measurement sets beyond identifying root strongly connected components, while telling PMU locations apart still requires the numerical parameters of the system.

eess.SY↗

Dynamic State Estimation from Sparse PMUs via Physics-Informed Graph Neural Operators

This paper proposes a physics-informed graph neural operator for power system dynamic state estimation. From a sparse, intermittent measurement window at a few generator buses, the operator estimates the rotor-angle and speed trajectories of all machines, unmeasured ones included, in one forward pass. A graph-attention encoder processes the measurements, and the swing equations are imposed as a hard constraint or as a soft one with a learned correction that absorbs model errors. It is trained on simulated measurements, without state labels. With several phasor measurement units, masked training hides one from the input but keeps it in the loss. On four transmission systems, simulations show that the operator is the most accurate estimator that neither optimizes per scenario nor uses state labels, except on the smallest system at large model errors, where tuned Kalman smoothers are better. Networks trained on simulated states are more accurate on the two smallest systems but not on the 118-bus system, where the operator is faster and more accurate than hard-constrained moving-horizon estimation. Under model errors, it matches or outperforms an optimization-based benchmark at a fraction of its cost. The results hold for a detailed machine model with exact parameters seen only through voltage phasors.

cs.LG↗

Observability and parameter estimation of a generic model for aggregated distributed energy resources

We propose a novel framework for estimating the parameters of an aggregated distributed energy resources (DER A) model. First, we introduce a rigorous method to determine whether all model parameters are estimable. When they are not, our approach identifies the subset of parameters that can be estimated. The proposed framework offers new insights into the number and specific parameters that can be reliably estimated based on commonly available measurements. It also highlights the limitations of calibrating such models. Second, we introduce a Kalman filtering method to calibrate the DER A model. Since we account for nonlinear effects such as saturation and deadbands, we develop a specific mechanism to handle smoothing functions within the Kalman filter. Specifically, we consider the extended and the unscented Kalman filter. We demonstrate the effectiveness of the proposed framework on a modified IEEE 34-node distribution feeder with inverter- based resources. Our findings align with the North American Electric Reliability Corporation's parameterization guideline and underscore the importance of model calibration in accurately capturing the collective dynamics of distributed energy resources installed on distribution systems.

eess.SY↗

Salted Fisher Information for Hybrid Systems

Discrete events change how parameter-influence propagates in hybrid systems. Prevailing Fisher information for- mulations assume that sensitivities evolve smoothly according to continuous-time variational equations and therefore neglect the sensitivity updates induced by discrete events. This paper derives a Fisher information matrix formulation compatible with hybrid systems. To do so, we use the saltation matrix, which encodes the first-order transformation of sensitivities induced by discrete events. We call the resulting formulation the salted Fisher information matrix (SFIM). The proposed framework unifies continuous information accumulation during flows with discrete updates at event times. We also show that hybrid persistence of excitation is sufficient for the SFIM to be positive definite

eess.SY↗

A Unified Mamba--MoE Surrogate for Closed-Loop Simulation and Measurement-Window Forecasting of Inverter Transients

This paper proposes a Mamba surrogate model with mixture-of-experts (MoE) routing to represent the transient dynamics of inverter-based resources. A Mamba surrogate model is a predictive machine learning model built on the Mamba architecture. MoE routing uses a router network to assign data-dependent weights to specialized subnetworks (experts). The resulting Mamba--MoE surrogate can perform two tasks: (i) closed-loop simulation and (ii) measurement-window forecasting of inverter transients. A single Mamba backbone with task conditioning and expert routing serves both tasks, replacing two separate specialists. Task-matched objectives fit each prediction form, and an adaptive conformal layer provides prediction intervals for both tasks. For the considered grid-following inverter, the unified surrogate model remains in the same low-error regime as a Mamba specialist pair while using 13% fewer parameters. The prediction intervals achieve 94--96% empirical mean marginal coverage across the two tasks. For transient dynamics---that is, beyond the vicinity of an equilibrium point---our surrogate model with MoE routing yields lower errors across all outputs in both tasks compared to a shared Mamba backbone without expert routing. A controller hardware-in-the-loop simulation validates our results and shows that adapting only the shared output head with limited measured data reduces held-out forecasting error.

cs.LG↗

Physics-Guided Dimension Reduction for Simulation-Free Operator Learning of Stiff Differential-Algebraic Systems

Neural surrogates for stiff differential-algebraic equations (DAEs) face two barriers: soft-constraint methods leave algebraic residuals that stiffness amplifies into errors, and hard-constraint methods require trajectory data from stiff integrators. We introduce an extended Newton implicit layer that enforces algebraic constraints exactly and reduces fast dynamics to their quasi-steady-state values in a single differentiable solve. Embedded in a physics-informed DeepONet, the layer recovers all fast and algebraic states exactly from slow-state predictions, removes the per-window stiffness-amplification pathway, and yields a stiffness-scaled Implicit Function Theorem gradient absent from penalty methods. Cascaded implicit layers extend this to multi-component systems with provable convergence. On a grid-forming inverter (stiffness ratio of about 4712), extended Newton attains 1.42% error versus 39.3% (penalty) and 57.0% (standard Newton); augmented Lagrangian and feedback linearization diverged. Two independently trained models compose without retraining (0.72% to 1.16% error, exact constraint satisfaction). Cross-domain validation on the Robertson stiff DAE (stiffness ratio up to $10^5$) confirms generalization. Conformal prediction provides 90% coverage with automatic out-of-distribution detection.

cs.LG↗

Stiffness-Aware Decentralized Dynamic State Estimation for Inverter-Dominated Power Systems

Dynamic state estimation (DSE) is becoming increasingly important for monitoring inverter-dominated power systems. Due to their cascading control structures, inverter-based resources (IBRs) exhibit multi-timescale dynamics, leading to stiff system models that pose significant challenges for conventional DSE methods. In particular, explicit discretization schemes often require impractically small sampling intervals to maintain numerical stability, increasing computational and communication burdens. To address this issue, this paper proposes a stiffness-aware decentralized DSE method for inverter-dominated power systems. The statistical linearization is used to construct a local linear surrogate model for the nonlinear dynamics, which allows matrix-exponential discretization to enable analytical uncertainty propagation in discrete time, rather than relying on explicit integration schemes. This enables stable DSE at lower sampling rates. Numerical results reveal the mechanism by which stiff dynamics destabilize conventional DSE and demonstrate that the proposed method achieves efficient and accurate estimation under coarse sampling conditions.

eess.SY↗

Dynamic state estimation of hybrid systems: Inverters that switch between grid-following and grid-forming control schemes

This paper develops a hybrid system modeling framework for inverters that switch between grid-following and grid-forming control schemes. In particular, such inverters are modeled as hybrid automata with guard conditions on voltage and frequency, and reset maps that maintain consistent phase, frequency, and droop references during mode transitions. The hybrid model is embedded within an extended Kalman filter to assess estimation performance under explicit mode switching. Results show that the proposed framework ensures stable, well-behaved dynamics and improves state estimation, especially near switching instants, compared with smooth continuous models.

eess.SY↗

Graph approach for observability analysis in power system dynamic state estimation

The proposed approach yields a numerical method that provably executes in linear time with respect to the number of nodes and edges in a graph. The graph, constructed from the power system model, requires only knowledge of the dependencies between state-to-state and output-to-state variables within a state-space framework. While graph-based observability analysis methods exist for power system static-state estimation, the approach presented here is the first for dynamic-state estimation (DSE). We examine decentralized and centralized DSE scenarios and compare our findings with a well-established, albeit non-scalable, observability analysis method in the literature. When compared to the latter in a centralized DSE setting, our method reduced computation time by 1440x.

eess.SY↗

Efficient streaming dynamic mode decomposition

We propose a reformulation of the streaming dynamic mode decomposition method that requires maintaining a single orthonormal basis, thereby reducing computational redundancy. The proposed efficient streaming dynamic mode decomposition method results in a constant-factor reduction in computational complexity and memory storage requirements. Numerical experiments on representative canonical dynamical systems show that the enhanced computational efficiency does not compromise the accuracy of the proposed method.

eess.SY↗

Participation Factors for Nonlinear Autonomous Dynamical Systems in the Koopman Operator Framework

We devise a novel formulation and propose the concept of modal participation factors to nonlinear dynamical systems. The original definition of modal participation factors (or simply participation factors) provides a simple yet effective metric. It finds use in theory and practice, quantifying the interplay between states and modes of oscillation in a linear time-invariant (LTI) system. In this paper, with the Koopman operator framework, we present the results of participation factors for nonlinear dynamical systems with an asymptotically stable equilibrium point or limit cycle. We show that participation factors are defined for the entire domain of attraction, beyond the vicinity of an attractor, where the original definition of participation factors for LTI systems is a special case. Finally, we develop a numerical method to estimate participation factors using time series data from the underlying nonlinear dynamical system. The numerical method can be implemented by leveraging a well-established numerical scheme in the Koopman operator framework called dynamic mode decomposition.

math.DS↗

Propagating Parameter Uncertainty in Power System Nonlinear Dynamic Simulations Using a Koopman Operator-Based Surrogate Model

We propose a Koopman operator-based surrogate model for propagating parameter uncertainties in power system nonlinear dynamic simulations. First, we augment the a priori known state-space model by reformulating parameters deemed uncertain as pseudo-state variables. Then, we apply the Koopman operator theory to the resulting state-space model and obtain a linear dynamical system model. This transformation allows us to analyze the evolution of the system dynamics through its Koopman eigenfunctions, eigenvalues, and modes. Of particular importance for this letter, the obtained linear dynamical system is a surrogate that enables the evaluation of parameter uncertainties by simply perturbing the initial conditions of the Koopman eigenfunctions associated with the pseudo-state variables. Simulations carried out on the New England test system reveal the excellent performance of the proposed method in terms of accuracy and computational efficiency.

eess.SY↗

A mode-in-state contribution factor based on Koopman operator and its application to power system analysis

This paper proposes a mode-in-state contribution factor for a class of nonlinear dynamical systems by utilizing spectral properties of the Koopman operator and sensitivity analysis. Using eigenfunctions of the Koopman operator for a target nonlinear system, we show that the relative contribution between modes and state variables can be quantified beyond a linear regime, where the nonlinearity of the system is taken into consideration. The proposed contribution factor is applied to the numerical analysis of large-signal simulations for an interconnected AC/multi-terminal DC power system.

eess.SY↗

Robust Dynamic Mode Decomposition

This paper develops a robust dynamic mode decomposition (RDMD) method endowed with statistical and numerical robustness. Statistical robustness ensures estimation efficiency at the Gaussian and non-Gaussian probability distributions, including heavy-tailed distributions. The proposed RDMD is statistically robust because the outliers in the data set are flagged via projection statistics and suppressed using a Schweppe-type Huber generalized maximum-likelihood estimator that minimizes a convex Huber cost function. The latter is solved using the iteratively reweighted least-squares algorithm that is known to exhibit a better convergence property and numerical stability than the Newton algorithms. Several numerical simulations using canonical models of dynamical systems demonstrate the excellent performance of the proposed RDMD method. The results reveal that it outperforms several other methods proposed in the literature.

stat.ME↗

Measurement placement in electric power transmission and distribution grids: Review of concepts, methods, and research needs

Sensing and measurement systems are quintessential to the safe and reliable operation of electric power grids. Their strategic placement is of ultimate importance because it is not economically viable to install measurement systems on every node and branch of a power grid, though they need to be monitored. An overwhelming number of strategies have been developed to meet oftentimes multiple conflicting objectives. The prime challenge in formulating the problem lies in developing a heuristic or an optimization model that, though mathematically tractable and constrained in cost, leads to trustworthy technical solutions. Further, large-scale, long-term deployments pose additional challenges because the boundary conditions change as technologies evolve. For instance, the advent of new technologies in sensing and measurement, as well as in communications and networking, might impact the cost and performance of available solutions and shift initially set conditions. Also, the placement strategies developed for transmission grids might not be suitable for distribution grids, and vice versa, because of unique characteristics; therefore, the strategies need to be flexible, to a certain extent, because no two power grids are alike. Despite the extensive literature on the present topic, the focus of published works tends to be on a specific subject, such as the optimal placement of measurements to ensure observability in transmission grids. There is a dearth of work providing a comprehensive picture for developing optimal placement strategies. Because of the ongoing efforts on the modernization of electric power grids, there is a need to consolidate the status quo while exposing its limitations to inform policymakers, industry stakeholders, and researchers on the research-and-development needs to push the boundaries for innovation.

eess.SY↗

A robust extended Kalman filter for power system dynamic state estimation using PMU measurements

This paper develops a robust extended Kalman filter to estimate the rotor angles and the rotor speeds of synchronous generators of a multimachine power system. Using a batch-mode regression form, the filter processes together predicted state vector and PMU measurements to track the system dynamics faster than the standard extended Kalman filter. Our proposed filter is based on a robust GM-estimator that bounds the influence of vertical outliers and bad leverage points, which are identified by means of the projection statistics. Good statistical efficiency under the Gaussian distribution assumption of the process and the observation noise is achieved thanks to the use of the Huber cost function, which is minimized via the iteratively reweighted least squares algorithm. The asymptotic covariance matrix of the state estimation error vector is derived via the covariance matrix of the total influence function of the GM-estimator. Simulations carried out on the IEEE 39-bus test system reveal that our robust extended Kalman filter exhibits good tracking capabilities under Gaussian process and observation noise while suppressing observation outliers, even in position of leverage. These good performances are obtained only under the validity of the linear approximation of the power system model.

eess.SY↗