arXiv ScienceSearch

arXiv subjects

Marco Lops

Publications and source records attributed to Marco Lops.

At least 19 recordsLinked to original sources

Transmission Mask Analysis for Range-Doppler Sensing in Half-Duplex ISAC

In this paper, we analyze the periodic transmission masks for MASked Modulation (MASM) in half-duplex integrated sensing and communication (ISAC), and derive their closed-form expected range-Doppler response $\mathbb{E}\{r(k,l,\nu)\}$. We show that range sidelobes ($k\neq l$) are Doppler-invariant, extending the range-sidelobe optimality to the 2-D setting. For the range mainlobe ($k=l$), periodic masking yields sparse Doppler sidelobes: Cyclic difference sets (CDSs) (in particular Singer CDSs) are minimax-optimal in a moderately dynamic regime, while in a highly dynamic regime the Doppler-sidelobe energy is a concave function of the mask autocorrelation, revealing an inevitable tradeoff with mainlobe fluctuation.

cs.IT

RIS-Enabled Transmitter Design for Joint Radar and Communication

Achieving efficient and cost-effective transmit beampattern control for integrated sensing and communication (ISAC) systems is a significant challenge. This paper addresses this by proposing a dual-function radar communication (DFRC) transmitter based on a reconfigurable intelligent surface (RIS) illuminated by a limited number of active sources. We formulate and solve the joint design of source waveforms and RIS phase shifts to match a desired space-frequency radiation pattern, and we evaluate the resulting ISAC system's performance in terms of radar detection probability and data transmission rate. Numerical results demonstrate the promising capabilities of this RIS-enabled transmitter for ISAC applications.

eess.SP

Masked Modulation: High-Throughput Half-Duplex ISAC Transmission Waveform Design

Integrated sensing and communication (ISAC) enables numerous innovative wireless applications. Communication-centric design is a practical choice for the construction of the sixth generation (6G) ISAC networks. Continuous-wave-based ISAC systems, with orthogonal frequency-division multiplexing (OFDM) being a representative example, suffer from the self-interference (SI) problem, and hence are less suitable for long-range sensing. On the other hand, pulse-based half-duplex ISAC systems are free of SI, but are also less favourable for high-throughput communication scenarios. In this treatise, we propose MASked Modulation (MASM), a half-duplex ISAC waveform design scheme, which minimises a range blindness metric, termed as "mainlobe fluctuation", given a duty cycle (proportional to communication throughput) constraint. In particular, MASM is capable of supporting high-throughput communication ($\sim$50% duty cycle) under mild mainlobe fluctuation. Moreover, MASM can be flexibly adapted to frame-level waveform designs by operating on the slow-time scale. In terms of optimal transmit mask design, a set of masks is shown to be ideal in the sense of sidelobe level and mainlobe fluctuation intensity.

cs.IT

Pulse Shaping for Random ISAC Signals: The Ambiguity Function Between Symbols Matters

Integrated sensing and communications (ISAC) has emerged as a pivotal enabling technology for next-generation wireless networks. Despite the distinct signal design requirements of sensing and communication (S&C) systems, shifting the symbol-wise pulse shaping (SWiPS) framework from communication-only systems to ISAC poses significant challenges in signal design and processing This paper addresses these challenges by examining the ambiguity function (AF) of the SWiPS ISAC signal and introducing a novel pulse shaping design for single-carrier ISAC transmission. We formulate optimization problems to minimize the average integrated sidelobe level (ISL) of the AF, as well as the weighted ISL (WISL) while satisfying inter-symbol interference (ISI), out-of-band emission (OOBE), and power constraints. Our contributions include establishing the relationship between the AFs of both the random data symbols and signaling pulses, analyzing the statistical characteristics of the AF, and developing algorithmic frameworks for pulse shaping optimization using successive convex approximation (SCA) and alternating direction method of multipliers (ADMM) approaches. Numerical results are provided to validate our theoretical analysis, which demonstrate significant performance improvements in the proposed SWiPS design compared to the root-raised cosine (RRC) pulse shaping for conventional communication systems.

eess.SP

Semi-Blind Multi-Tag Ambient Backscatter Communications Using Radar Signals

In this work, we consider a backscatter communication system wherein multiple asynchronous sources (tags) exploit the reverberation generated by a nearby radar transmitter as an ambient carrier to deliver a message to a common destination (reader) through a number of available subchannels. We propose a new encoding strategy wherein each tag transmits both pilot and data symbols on each subchannel and repeats some of the data symbols on multiple subchannels. We then exploit this signal structure to derive two semi-blind iterative algorithms for joint estimation of the data symbols and the subchannel responses that are also able to handle some missing measurements. The proposed encoding/decoding strategies are scalable with the number of tags and their payload and can achieve different tradeoffs in terms of transmission and error rates. Some numerical examples are provided to illustrate the merits of the proposed solutions.

eess.SP

Improving the Ranging Performance of Random ISAC Signals Through Pulse Shaping Design

In this paper, we propose a novel pulse shaping design for single-carrier integrated sensing and communication (ISAC) transmission. Due to the communication information embedded in the ISAC signal, the resulting auto-correlation function (ACF) is determined by both the information-conveying random symbol sequence and the signaling pulse, where the former leads to random fluctuations in the sidelobes of the ACF, impairing the range estimation performance. To overcome this challenge, we first analyze the statistical characteristics of the random ACF under the symbol-wise pulse shaping (SWPS) regime. As a step further, we formulate an optimization problem to design ISAC pulse shaping filters, which minimizes the average integrated sidelobe level ratio (ISLR) while meeting the Nyquist criterion, subject to power and bandwidth constraints. We then show that the problem can be recast as a convex quadratic program by expressing it in the frequency domain, which can be readily solved through standard tools. Numerical results demonstrate that the proposed pulse shaping design achieves substantial ranging sidelobe reduction compared to the celebrated root-raised cosine (RRC) pulse shaping, given that the communication throughput is unchanged.

eess.SP

Detection of Ghost Targets for Automotive Radar in the Presence of Multipath

Colocated multiple-input multiple-output (MIMO) technology has been widely used in automotive radars as it provides accurate angular estimation of the objects with relatively small number of transmitting and receiving antennas. Since the Direction Of Departure (DOD) and the Direction Of Arrival (DOA) of line-of-sight targets coincide, MIMO signal processing allows forming a larger virtual array for angle finding. However, multiple paths impinging the receiver is a major limiting factor, in that radar signals may bounce off obstacles, creating echoes for which the DOD does not equal the DOA. Thus, in complex scenarios with multiple scatterers, the direct paths of the intended targets may be corrupted by indirect paths from other objects, which leads to inaccurate angle estimation or ghost targets. In this paper, we focus on detecting the presence of ghosts due to multipath by regarding it as the problem of deciding between a composite hypothesis, H0 say, that the observations only contain an unknown number of direct paths sharing the same (unknown) DOD's and DOA's, and a composite alternative, H1 say, that the observations also contain an unknown number of indirect paths, for which DOD's and DOA's do not coincide. We exploit the Generalized Likelihood Ratio Test (GLRT) philosophy to determine the detector structure, wherein the unknown parameters are replaced by carefully designed estimators. The angles of both the active direct paths and of the multi-paths are indeed estimated through a sparsity-enforced Compressed Sensing (CS) approach with Levenberg-Marquardt (LM) optimization to estimate the angular parameters in the continuous domain. An extensive performance analysis is finally offered in order to validate the proposed solution.

eess.SP

Generalized Deterministic-Random Tradeoff in Integrated Sensing and Communications: The Sensing-Optimal Operating Point

Integrated sensing and communications (ISAC) has been recognized as a key component in the envisioned 6G communication systems. Understanding the fundamental performance tradeoff between sensing and communication functionalities is essential for designing practical cost-efficient ISAC systems. In this paper, we aim for augmenting the current understanding of the deterministic-random tradeoff (DRT) between sensing and communication, by analyzing the sensing-optimal operating point of the fundamental capacity-distortion region. We show that the DRT exists for generic sensing performance metrics that are in general not convex/concave in the ISAC waveform. Especially, we elaborate on a representative non-convex performance metric, namely the detection probability for target detection tasks.

cs.IT

Radar-enabled ambient backscatter communications

In this work, we exploit the radar clutter (i.e., the ensemble of echoes generated by the terrain and/or the surrounding objects in response to the signal emitted by a radar transmitter) as a carrier signal to enable an ambient backscatter communication from a source (tag) to a destination (reader). The proposed idea relies on the fact that, since the radar excitation is periodic, the radar clutter is itself periodic over time scales shorter than the coherence time of the environment. Upon deriving a convenient signal model, we propose two encoding/decoding schemes that do not require any coordination with the radar transmitter or knowledge of the radar waveform. Different tradeoffs in terms of transmission rate and error probability can be obtained upon changing the control signal driving the tag switch or the adopted encoding rule; also, multiple tags can be accommodated with either a sourced or an unsourced multiple access strategy. Some illustrative examples are provided.

eess.SP

MIMO OFDM Dual-Function Radar-Communication Under Error Rate and Beampattern Constraints

In this work we consider a multiple-input multiple-output (MIMO) dual-function radar-communication (DFRC) system, which senses multiple spatial directions and serves multiple users. Upon resorting to an orthogonal frequency division multiplexing (OFDM) transmission format and a differential phase shift keying (DPSK) modulation, we study the design of the radiated waveforms and of the receive filters employed by the radar and the users. The approach is communication-centric, in the sense that a radar-oriented objective is optimized under constraints on the average transmit power, the power leakage towards specific directions, and the error rate of each user, thus safeguarding the communication quality of service (QoS). We adopt a unified design approach allowing a broad family of radar objectives, including both estimation- and detection-oriented merit functions. We devise a suboptimal solution based on alternating optimization of the involved variables, a convex restriction of the feasible search set, and minorization-maximization, offering a single algorithm for all of the radar merit functions in the considered family. Finally, the performance is inspected through numerical examples.

eess.SP

Foundations of MIMO Radar Detection Aided by Reconfigurable Intelligent Surfaces

A reconfigurable intelligent surface (RIS) is a nearly-passive flat layer made of inexpensive elements that can add a tunable phase shift to the impinging electromagnetic wave and are controlled by a low-power electronic circuit. This paper considers the fundamental problem of target detection in a RIS-aided multiple-input multiple-output (MIMO) radar. At first, a general signal model is introduced, which includes the possibility of using up to two RISs (one close to the radar transmitter and one close to the radar receiver) and subsumes both a monostatic and a bistatic radar configuration with or without a line-of-sight view of the prospective target. Upon resorting to a generalized likelihood ratio test (GLRT), the design of the phase shifts introduced by the RIS elements is formulated as the maximization of the probability of detection in the location under inspection for a fixed probability of false alarm, and suitable optimization algorithms are proposed. The performance analysis shows the benefits granted by the presence of the RISs and shed light on the interplay among the key system parameters, such as the radar-RIS distance, the RIS size, and location of the prospective target. A major finding is that the RISs should be better deployed in the near-field of the radar arrays at both the transmit and the receive side. The paper is concluded by discussing some open problems and foreseen applications.

eess.SP

Energy Efficiency Optimization in Radar-Communication Spectrum Sharing

Energy efficiency, possibly coupled with cognition-based and spectrum-sharing architectures, is a key enabling technology for green communications in 5G-and-beyond standards. In this context, the present paper considers a multiple-input multiple-output communication system cooperatively coexisting with a surveillance radar: the objective function is the communication system energy efficiency, while radar operation is safeguarded by constraining the minimum received signal-to-disturbance ratio for a set of range-azimuth cells of the controlled scene, and no time synchronization between them is assumed. The degrees of freedom are the transmit powers of both systems, the space-time communication codebook and the linear filters at the radar receiver. The resulting optimization problem is non-convex, due to both the objective function and the presence of signal-dependent interference (clutter): we develop a block-coordinate-ascent approximate solution, and offer a thorough performance assessment, so as to elicit the merits of the proposed approach, along with the interplay among the achievable energy efficiency, the density of scatterers in the environment, and the size of the set of protected radar cells.

eess.SP

Radar Target Detection aided by Reconfigurable Intelligent Surfaces

In this work, we consider the target detection problem in a sensing architecture where the radar is aided by a reconfigurable intelligent surface (RIS), that can be modeled as an array of sub-wavelength small reflective elements capable of imposing a tunable phase shift to the impinging waves and, ultimately, of providing the radar with an additional echo of the target. A theoretical analysis is carried out for closely- and widely-spaced (with respect to the target) radar and RIS and for different beampattern configurations, and some examples are provided to show that large gains can be achieved by the considered detection architecture.

eess.SP

ADMM-Net for Communication Interference Removal in Stepped-Frequency Radar

Complex ADMM-Net, a complex-valued neural network architecture inspired by the alternating direction method of multipliers (ADMM), is designed for interference removal in super-resolution stepped frequency radar angle-range-doppler imaging. Tailored to an uncooperative scenario wherein a MIMO radar shares spectrum with communications, the ADMM-Net recovers the radar image---which is assumed to be sparse---and simultaneously removes the communication interference, which is modeled as sparse in the frequency domain owing to spectrum underutilization. The scenario motivates an $\ell_1$-minimization problem whose ADMM iteration, in turn, undergirds the neural network design, yielding a set of generalized ADMM iterations that have learnable hyperparameters and operations. To train the network we use random data generated according to the radar and communication signal models. In numerical experiments ADMM-Net exhibits markedly lower error and computational cost than ADMM and CVX.

eess.SP

Transmit Power Allocation for Joint Communication and Sensing through Massive MIMO Arrays

The paper considers a scenario where a base station (BS), equipped with a large-scale antenna array, execute, using the same frequency range, both communication with mobile users and radar surveillance of the surrounding environment, relying on the ability of the massive MIMO array to synthesize multiple narrow beams. Based on an OFDM signaling format for both communication and surveillance tasks, a lower bound to the system achievable downlink rate is provided, along with a GLRT detection rule that does not require any knowledge about the target parameters. Then, a power allocation strategy is proposed, aimed at maximizing the fairness across the mobile users, while guaranteeing a minimum signal to interference ratio threshold value for the radar system. Numerical results show that the system performs effectively, and that the power control procedure helps in improving the system fairness.

cs.IT

Using Massive MIMO Arrays for Joint Communication and Sensing

One of the trends that is gaining more and more importance in the field of beyond-5G and 6G wireless communication systems is the investigation on systems that jointly perform communication and sensing of the environment. This paper proposes to use a base station (BS), that we call \textit{radar-BS}, equipped with a large-scale antenna array to execute, using the same frequency range, communication with mobile users and sensing/surveillance of the surrounding environment through radar scanning. The massive antenna array can indeed both operate as a MIMO radar with co-located antennas -- transmitting radar signals pointing at positive elevation angles -- and perform signal-space beamforming to communicate with users mainly based on the ground. Our results show that using a massive MIMO radar-BS the communication and the radar system can coexist with little mutual interference.

cs.IT

Joint Design of surveillance radar and MIMO communication in cluttered environments

In this study, we consider a spectrum sharing architecture, wherein a multiple-input multiple-output communication system cooperatively coexists with a surveillance radar. The degrees of freedom for system design are the transmit powers of both systems, the receive linear filters used for pulse compression and interference mitigation at the radar receiver, and the space-time communication codebook. The design criterion is the maximization of the mutual information between the input and output symbols of the communication system, subject to constraints aimed at safeguarding the radar performance. Unlike previous studies, we do not require any time-synchronization between the two systems, and we guarantee the radar performance on all of the range-azimuth cells of the patrolled region under signal-dependent (endogenous) and signal-independent (exogenous) interference. This leads to a non-convex problem, and an approximate solution is thus introduced using a block coordinate ascent method. A thorough analysis is provided to show the merits of the proposed approach and emphasize the inherent tradeoff among the achievable mutual information, the density of scatterers in the environment, and the number of protected radar cells.

eess.SP

Adaptive detection and localization exploiting the IEEE 802.11ad standard

In this work, we exploit the sector level sweep of the IEEE 802.11ad communication standard to implement an opportunistic radar at mmWaves and derive an adaptive procedure for detecting multiple targets (echoes) and estimating their parameters. The proposed detector/estimator extracts the prospective echoes one-by-one from the received signal, after removing the interference caused by the previously detected (stronger) targets. Examples are provided to assess the system performance, also in comparison with the canonical matched-filter peak-detector and the Cram\'er-Rao bounds. Results indicate that the proposed method is robust against the signal spillover and the near-far problem caused by the imperfect auto-correlation of the probing signal and, for the same probability of false alarm, grants detection and localization performances close to those previously obtained in a simplified single-target scenario.

eess.SP