arXiv subjects

Marcel Rey

Publications and source records attributed to Marcel Rey.

12 recordsLinked to original sources

arXiv2026

Substrate contact angle governs microgel shape, stiffness and deposition pattern

Soft microgels are widely used as deformable building blocks for two-dimensional assemblies, yet solid substrates are often treated as passive supports after interfacial deposition. Here, we show that substrate wettability mechanically preconditions soft microgels before drying. Using in-liquid force-volume atomic force microscopy, we find that the same microgels adopt markedly different hydrated shapes and stiffness profiles depending on substrate contact angle: hydrophobic substrates induce spreading, flattening, and internal stiffening, whereas hydrophilic substrates preserve taller, softer microgels with smaller contact areas. These single-microgel states can explain how Langmuir-Blodgett-deposited monolayers respond during drying. On hydrophilic substrates, the observed assemblies are consistent with soft and weakly immobilized microgels rearranging under immersion-capillary forces, producing distinct corona-corona and core-core contact states and an apparent isostructural transition. On hydrophobic substrates, the flattened and stiffened microgels are more strongly immobilized, likely suppressing capillary-driven rearrangements and largely preserving the transferred interfacial assembly structure. These findings establish substrate-controlled microgel mechanics as the missing link between interfacial self-assembly and the final structures observed after transfer and drying.

cond-mat.soft↗

arXiv2026

Light-propelled microparticles based on symmetry-broken refractive index profiles

Active colloidal microparticles require reliable actuation to sustain directed motion. Light-based propulsion is particularly attractive as it provides persistent energy supply and enables direct spatiotemporal control. Here, we introduce 3D-printable particles with symmetry-broken refractive index profiles (SBRIP particles) that achieve propulsion through direct momentum transfer from asymmetric light refraction. Internal refractive-index gradients provide optical symmetry breaking independent of external shape, fundamentally decoupling propulsion from particle geometry. Geometrically symmetry-broken particles with a homogeneous refractive index are another special case, where propulsion originates from refractive contrast at the boundary instead of within the particle. Unlike conventional systems relying on absorption or reflection, this transparency-based mechanism minimizes heating and mitigates shadowing in bulk suspensions. We present a theoretical framework for refractive propulsion as well as numerical simulations of the SBRIP particles using raytracing and the finite volume method. This is complemented by experiments, validating the momentum transfer mechanism using particles with geometric symmetry breaking. The high transparency of our particles ensures deep light penetration, enabling the realization of volumetric active matter. This opens pathways toward adaptive nonlinear optical materials where light-driven particle reorganization modulates the local refractive index, establishing a dynamic feedback loop between the optical field and the material structure.

physics.optics↗

arXiv2025

Acoustic neural networks: Identifying design principles and exploring physical feasibility

Wave-guide-based physical systems provide a promising route toward energy-efficient analog computing beyond traditional electronics. Within this landscape, acoustic neural networks represent a promising approach for achieving low-power computation in environments where electronics are inefficient or limited, yet their systematic design has remained largely unexplored. Here we introduce a framework for designing and simulating acoustic neural networks, which perform computation through the propagation of sound waves. Using a digital-twin approach, we train conventional neural network architectures under physically motivated constraints including non-negative signals and weights, the absence of bias terms, and nonlinearities compatible with intensity-based, non-negative acoustic signals. Our work provides a general framework for acoustic neural networks that connects learnable network components directly to physically measurable acoustic properties, enabling the systematic design of realizable acoustic computing systems. We demonstrate that constrained recurrent and hierarchical architectures can perform accurate speech classification, and we propose the SincHSRNN, a hybrid model that combines learnable acoustic bandpass filters with hierarchical temporal processing. The SincHSRNN achieves up to 95% accuracy on the AudioMNIST dataset while remaining compatible with passive acoustic components. Beyond computational performance, the learned parameters correspond to measurable material and geometric properties such as attenuation and transmission. Our results establish general design principles for physically realizable acoustic neural networks and outline a pathway toward low-power, wave-based neural computing.

cs.SD↗

arXiv2024

Microscopic Geared Mechanisms

The miniaturization of mechanical machines is critical for advancing nanotechnology and reducing device footprints. Traditional efforts to downsize gears and micromotors have faced limitations at around 0.1 mm for over thirty years due to the complexities of constructing drives and coupling systems at such scales. Here, we present an alternative approach utilizing optical metasurfaces to locally drive microscopic machines, which can then be fabricated using standard lithography techniques and seamlessly integrated on the chip, achieving sizes down to tens of micrometers with movements precise to the sub-micrometer scale. As a proof of principle, we demonstrate the construction of microscopic gear trains powered by a single driving gear with a metasurface activated by a plane light wave. Additionally, we develop a versatile pinion and rack micromachine capable of transducing rotational motion, performing periodic motion, and controlling microscopic mirrors for light deflection. Our on-chip fabrication process allows for straightforward parallelization and integration. Using light as a widely available and easily controllable energy source, these miniaturized metamachines offer precise control and movement, unlocking new possibilities for micro- and nanoscale systems.

physics.optics↗

arXiv2024

Programmable self-assembly of core-shell ellipsoids at liquid interfaces

Ellipsoidal particles confined at liquid interfaces exhibit complex self-assembly behaviour due to quadrupolar capillary interactions induced by meniscus deformation. These interactions cause particles to attract each other in either tip-to-tip or side-to-side configurations. However, controlling their interfacial self-assembly is challenging because it is difficult to predict which of these two states will be preferred. In this study, we demonstrate that introducing a soft shell around hard ellipsoidal particles provides a means to control the self-assembly process, allowing us to switch the preferred configuration between these states. We study their interfacial self-assembly and find that pure ellipsoids without a shell consistently form a "chain-like" side-to-side assembly, regardless of aspect ratio. In contrast, core-shell ellipsoids transition from "flower-like" tip-to-tip to "chain-like" side-to-side arrangements as their aspect ratios increase. The critical aspect ratio for transitioning between these structures increases with shell-to-core ratios. Our experimental findings are corroborated by theoretical calculations and Monte Carlo simulations, which map out the phase diagram of thermodynamically preferred self-assembly structures for core-shell ellipsoids as a function of aspect ratio and shell-to-core ratios. This study shows how to program the self-assembly of anisotropic particles by tuning their physicochemical properties, allowing the deterministic realization of distinct structural configurations.

cond-mat.soft↗

arXiv2023

Light, Matter, Action: Shining light on active matter

Light carries energy and momentum. It can therefore alter the motion of objects from atomic to astronomical scales. Being widely available, readily controllable and broadly biocompatible, light is also an ideal tool to propel microscopic particles, drive them out of thermodynamic equilibrium and make them active. Thus, light-driven particles have become a recent focus of research in the field of soft active matter. In this perspective, we discuss recent advances in the control of soft active matter with light, which has mainly been achieved using light intensity. We also highlight some first attempts to utilize light's additional degrees of freedom, such as its wavelength, polarization, and momentum. We then argue that fully exploiting light with all of its properties will play a critical role to increase the level of control over the actuation of active matter as well as the flow of light itself through it. This enabling step will advance the design of soft active matter systems, their functionalities and their transfer towards technological applications.

cond-mat.soft↗

arXiv2022

Contactless Interfacial Rheology: Probing Shear at Liquid-Liquid Interfaces without an Interfacial Geometry via Fluorescence Microscopy

Interfacial rheology is important for understanding properties such as Pickering emulsion or foam stability. Currently, the response is measured using a probe directly attached to the interface. This can both disturb the interface and is coupled to flow in the bulk phase, limiting its sensitivity. We have developed a contactless interfacial method to perform interfacial shear rheology on liquid/liquid interfaces with no tool attached directly to the interface. This is achieved by shearing one of the liquid phases and measuring the interfacial response via confocal microscopy. Using this method we have measured steady shear material parameters such as interfacial elastic moduli for interfaces with solid-like behaviour and interfacial viscosities for fluid-like interfaces. The accuracy of this method has been verified relative to a double-wall ring geometry. Moreover, using our contactless method we are able to measure lower interfacial viscosities than those that have previously been reported using a double-wall ring geometry. A further advantage is the simultaneous combination of macroscopic rheological analysis with microscopic structural analysis. Our analysis directly visualizes how the interfacial response is strongly correlated to the particle surface coverage and their interfacial assembly. Furthermore, we capture the evolution and irreversible changes in the particle assembly that correspond with the rheological response to steady shear.

cond-mat.soft↗

arXiv2021

Changing the flow profile and resulting drying pattern of dispersion droplets via contact angle modification

Spilling tea or coffee leads to a tell-tale circular stain after the droplet dries, known as the "coffee ring effect". The evaporation of suspension droplets is a complex physical process, and predicting and controlling the particle deposit patterns from sessile droplet evaporation are essential for many industrial processes, such as ink-jet printing and crop-care applications. In this article, we systematically investigate the effect of surface wettability on the evaporation dynamics of a particle-laden droplet, focussing on the contact line stick-slip behaviour, the hydrodynamic flow of the suspended particles, and the resulting particle deposit after evaporation. We use substrates with different wettabilities, ranging from hydrophilic to hydrophobic, and quantify the internal flow during the evaporation by tracking (fluorescent) tracer particles. We find that the internal flow shifts from a predominantly outward flow towards the contact line for low contact angles to an inward flow for large contact angles. Correspondingly, the particle deposit transitions from the typical coffee-ring pattern to a central stain as the substrates's hydrophobicity increases. Finally, we corroborate these experimental findings with dynamic density functional theory, modelling the droplet evaporation process and stick-slip behaviour of the contact line. Our investigation suggests that the wettability of the substrate can significantly alter hydrodynamic flow within drying droplets, thereby affecting the resulting particle deposit.

physics.flu-dyn↗

arXiv2021

Interface-induced hysteretic volume phase transition of microgels: simulation and experiment

Thermo-responsive microgel particles can exhibit a drastic volume shrinkage upon increasing the solvent temperature. Recently we found that the spreading of poly(N-isopropylacrylamide)(PNiPAm) microgels at a liquid interface under the influence of surface tension hinders the temperature-induced volume phase transition. In addition, we observed a hysteresis behavior upon temperature cycling, i.e. a different evolution in microgel size and shape depending on whether the microgel was initially adsorbed to the interface in expanded or collapsed state. Here, we model the volume phase transition of such microgels at an air/water interface by monomer-resolved Brownian dynamics simulations and compare the observed behavior with experiments. We reproduce the experimentally observed hysteresis in the microgel dimensions upon temperature variation. Our simulations did not observe any hysteresis for microgels dispersed in the bulk liquid, suggesting that it results from the distinct interfacial morphology of the microgel adsorbed at the liquid interface. An initially collapsed microgel brought to the interface and subjected to subsequent swelling and collapsing (resp. cooling and heating) will end up in a larger size than it had in the original collapsed state. Further temperature cycling, however, only shows a much reduced hysteresis, in agreement with our experimental observations. We attribute the hysteretic behavior to a kinetically trapped initial collapsed configuration, which relaxes upon expanding in the swollen state. We find a similar behavior for linear PNiPAm chains adsorbed to an interface. Our combined experimental - simulation investigation provides new insights into the volume phase transition of PNiPAm materials adsorbed to liquid interfaces.

cond-mat.soft↗

arXiv2020

Soft particles at liquid interfaces: From molecular particle architecture to collective phase behavior

Soft particles such as microgels and core-shell particles can undergo significant and anisotropic deformations when adsorbed to a liquid interface. This, in turn, leads to a complex phase behavior upon compression. Here we develop a multiscale framework to rationally link the molecular particle architecture to the resulting interfacial morphology and, ultimately, to the collective interfacial phase behavior, enabling us to identify the key single-particle properties underlying two-dimensional continuous, heterostructural, and isostructural solid-solid transitions. Our approach resolves existing discrepancies between experiments and simulations and thus provides a unifying framework to describe phase transitions in interfacial soft-particle systems. We establish proof-of-principle for our rational approach by synthesizing three different poly(N-isopropylacrylamide) soft-particle architectures, each of which corresponds to a different targeted phase behavior. In parallel, we introduce a versatile and highly efficient coarse-grained simulation method that adequately captures the qualitative key features of each soft-particle system; the novel ingredient in our simulation model is the use of auxiliary degrees of freedom to explicitly account for the swelling and collapse of the particles as a function of surface pressure. Notably, these combined efforts allow us to establish the first experimental demonstration of a heterostructural transition to a chain phase in a single-component system, as well as the first accurate in silico account of the two-dimensional isostructural transition. Overall, our multiscale framework provides a bridge between physicochemical soft-particle characteristics at the molecular- and nanoscale and the collective self-assembly phenomenology at the macroscale, paving the way towards novel materials with on-demand interfacial behavior.

cond-mat.soft↗

arXiv2020

Pattern formation in two-dimensional hard-core/soft-shell systems with variable soft shell profiles

Hard-core/soft shell (HCSS) particles have been shown to self-assemble into a remarkably rich variety of structures under compression due to the simple interplay between the hard-core and soft-shoulder length scales in their interactions. Most studies in this area model the soft shell interaction as a square shoulder potential. Although appealing from a theoretical point of view, the potential is physically unrealistic because there is no repulsive force in the soft shell regime, unlike in experimental HCSS systems. To make the model more realistic, here we consider HCSS particles with a range soft shell potential profiles beyond the standard square shoulder form and study the model using both minimum energy calculations and Monte Carlo simulations. We find that by tuning density and the soft shell profile, HCSS particles in the thin shell regime (i.e., shell to core ratio $r_1/r_0 \leq \sqrt{3}$) can form a large range of structures, including hexagons, chains, squares, rhomboids and two distinct zig-zag structures. Furthermore, by tuning the density and $r_1/r_0$, we find that HCSS particles with experimentally realistic linear ramp soft shoulder repulsions can form honeycombs and quasicrystals with 10-fold and 12-fold symmetry. Our study therefore suggests the exciting possibility of fabricating these exotic 2D structures experimentally through colloidal self-assembly.

cond-mat.soft↗

arXiv2019

Stimuli-responsive behavior of PNiPAm microgels under interfacial confinement

The volume phase transition of microgels is one of the most paradigmatic examples of stimuli-responsiveness, enabling a collapse from a highly swollen microgel state into a densely coiled state by an external stimulus. Although well characterized in bulk, it remains unclear how the phase transition is affected by the presence of a confining interface. Here, we demonstrate that the temperature-induced volume phase transition of poly(N-isopropylacrylamide) microgels, conventionally considered an intrinsic molecular property of the polymer, is in fact largely suppressed when the microgel is adsorbed to an air/liquid interface. We further observe a hysteresis in core morphology and interfacial pressure between heating and cooling cycles. Our results, supported by molecular dynamics simulations, reveal that the dangling polymer chains of microgel particles, spread at the interface under the influence of surface tension, do not undergo any volume phase transition, demonstrating that the balance in free energy responsible for the volume phase transition is fundamentally altered by interfacial confinement. These results imply that important technological properties of such systems, including the temperature-induced destabilization of emulsions does not occur via a decrease in interfacial coverage of the microgels.

cond-mat.soft↗