arXiv subjects

Marc Moonen

Publications and source records attributed to Marc Moonen.

At least 19 recordsLinked to original sources

arXiv2026

Distributed Multichannel Wiener Filtering for Topology-Unconstrained Wireless Acoustic Sensor Networks

This paper introduces the topology-independent distributed multichannel Wiener filter (TI-dMWF), a novel algorithm for distributed node-specific signal estimation in wireless acoustic sensor networks (WASNs) with unconstrained topologies. The TI-dMWF enables each node in the network to compute its centralized multichannel Wiener filter solution by exchanging only low-dimensional fused signals, without requiring iterative estimation, unlike state-of-the-art approaches such as the topology-independent distributed adaptive node-specific signal estimation (TI-DANSE) algorithm. The TI-dMWF is proven optimal when each source is observed by either all nodes or only one node. Theoretical analysis and numerical simulations confirm that it achieves centralized estimation performance in a single run. Its latency as a function of the pruned-tree depth and its computational complexity are also analyzed. Its robustness is assessed in reverberant-room simulations under estimated second-order statistics, various network topologies, and deviations from the assumed observability model.

eess.AS↗

arXiv2026

HIDVAS: A Hearing Instrument Dataset in Various Acoustical Scenarios for Algorithm Evaluation and Training

To evaluate the performance of audio signal processing algorithms and to train data-driven algorithms, e.g., as applied in hearing instruments, either simulated or recorded data can be used. While large batches of simulated data can be generated using mathematical models, recorded data provide a more adequate representation of real-life scenarios. Therefore, in this paper, the Hearing Instrument Dataset in Various Acoustical Scenarios (HIDVAS) is introduced. This dataset consists of both impulse responses and audio recordings using eight external loudspeakers, two external microphones, and a dummy head. On this dummy head behind-the-ear (BTE) hearing instrument shells with two microphones per shell are mounted, and in the dummy head's ears receiver-in-canal (RIC) hearing instrument loudspeakers are inserted. The dummy head also contains microphones located at its eardrum. The impulse responses have been computed from a swept-sine recording for each microphone-loudspeaker pair, and the audio recordings have been obtained by playing back audio (male and female speech, speech shaped noise, singing voice, stringed instrument, wind instrument, and percussion instrument) through each individual loudspeaker and recording simultaneously using all microphones. These recordings have been repeated for four hearing instrument domes (open, semi-open, closed, and no-RIC) in three reverberation conditions in one room (T30 = 0.09 s, T30 = 0.47 s, and T30 = 0.73 s), and in one reverberation condition in a different room (T30 = 1.48 s). The usage of the dataset as a `hearing instrument in a box' is exemplified with three example use cases.

eess.AS↗

arXiv2026

On the Use of Dereverberation for Acoustic Feedback Cancellation

In public address systems and hearing aids, the maximally achievable amplification or gain is limited by acoustic feedback. Therefore, in order to be able to apply a higher gain, feedback cancellation methods are required. In addition, it is oftentimes also desirable to dereverberate a recorded signal, that is, remove the late reverberation component of the signal, before playing it back. In this paper, it is shown that under two mild conditions, the acoustic feedback signal can be written as a reverberant version of the source signal. Therefore, it is possible to treat the joint dereverberation and acoustic feedback cancellation problem as a dereverberation-only problem, meaning that dereverberation algorithms can be applied to the joint problem. Simulations corroborate this finding

eess.AS↗

arXiv2026

Cooperative Uplink Channel Estimation in User-Centric Cell-free Massive MIMO Communication Networks

Cell-free massive multi-input-multi-output (CFmMIMO) communication networks aim to provide uniform quality of service by distributing access points (APs) across a coverage area. In user-centric variants, each user equipment (UE) can choose a cluster of APs with the best channel conditions (e.g., the closest APs) for accessing service. This approach eliminates the notion of cells with dedicated regions and APs, as found in cellular mMIMO communication networks. Estimating uplink channels between UEs and APs is a crucial step in CFmMIMO communication networks; however, existing channel estimation (CE) approaches typically originate from mMIMO systems without considering the unique properties of CFmMIMO communication networks. For instance, shorter AP-UE distances in CFmMIMO systems result in Rician channel models with prominent line of sight (LoS) components between APs and UEs, motivating cooperation between APs for improved performance. In this paper, we propose a cooperative minimum-mean-squared-error (MMSE)-based uplink CE approach where APs share their linearly compressed signals as fused signals with other APs in the same cluster. The proposed approach is optimal, i.e., its performance is equivalent to that of the centralized CE approach, where APs share their uncompressed raw signals. Notably, this optimality is achieved in one shot; that is, given the required correlation matrices, the optimal fusion filters and estimators are derived non-iteratively. Consequently, the proposed approach guarantees lower communication overhead for cooperative CE compared to the centralized approach. Numerical experiments corroborate the superior performance of the proposed cooperative CE approaches in terms of CE accuracy and convergence rate.

eess.SP↗

arXiv2026

Distributed Multichannel Wiener Filtering for Wireless Acoustic Sensor Networks

[This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.] In a wireless acoustic sensor network (WASN), devices (i.e., nodes) can collaborate through distributed algorithms to collectively perform audio signal processing tasks. This paper focuses on the distributed estimation of node-specific desired speech signals using network-wide Wiener filtering. The objective is to match the performance of a centralized system that would have access to all microphone signals, while reducing the communication bandwidth usage of the algorithm. Existing solutions, such as the distributed adaptive node-specific signal estimation (DANSE) algorithm, converge towards the multichannel Wiener filter (MWF) which solves a centralized linear minimum mean square error (LMMSE) signal estimation problem. However, they do so iteratively, which can be slow and impractical. Many solutions also assume that all nodes observe the same set of sources of interest, which is often not the case in practice. To overcome these limitations, we propose the distributed multichannel Wiener filter (dMWF) for fully connected WASNs. The dMWF is non-iterative and optimal even when nodes observe different sets of sources. In this algorithm, nodes exchange neighbor-pair-specific, low-dimensional (fused) signals estimating the contribution of sources observed by both nodes in the pair. We formally prove the optimality of dMWF and demonstrate its performance in simulated speech enhancement experiments. The proposed algorithm is shown to outperform DANSE in terms of objective metrics after short operation times, highlighting the benefit of its iterationless design.

eess.AS↗

arXiv2026

Master-Assisted Channel Estimation for Cell-Free Massive MIMO Networks

Cell-free massive-multiple-input-multiple-output (CFmMIMO) is a key enabler for sixth-generation (6G) wireless communication networks, where distributed access points (APs) jointly serve user equipments (UEs). In commonly adopted channel models for CFmMIMO networks, inter-AP channel correlation is assumed to be absent, thereby eliminating the potential benefits of centralized processing. However, by carefully designing the pilot transmission phase, the AP received signals during pilot transmission can become correlated, and thus, centralization can improve channel estimation performance, despite the absence of inter-AP channel correlation. In this paper, we propose a channel estimation scheme, termed master-assisted channel estimation (MACE), that aims to leverage inter-AP signal correlation by means of partially centralized processing and hence improve channel estimation performance. In MACE, a subset of APs fuse and forward their received pilot signals to a master AP, which then performs channel estimation using the fused signals together with its locally received signals. This scheme strikes a balance between local and fully centralized processing by leveraging inter-AP signal correlation, while reducing fronthaul signaling and computational complexity. Numerical experiments demonstrate that MACE consistently outperforms local channel estimation, where inter-AP signal correlation is neglected.

eess.SP↗

arXiv2026

Sequential Processing Strategies in Fronthaul Constrained Cell-Free Massive MIMO Networks

In a cell-free massive MIMO (CFmMIMO) network with a daisy-chain fronthaul, the amount of information that each access point (AP) needs to communicate with the next AP in the chain is determined by the location of the AP in the sequential fronthaul. Therefore, we propose two sequential processing strategies to combat the adverse effect of fronthaul compression on the sum of users' spectral efficiency (SE): 1) linearly increasing fronthaul capacity allocation among APs and 2) Two-Path users' signal estimation. The two strategies show superior performance in terms of sum SE compared to the equal fronthaul capacity allocation and Single-Path sequential signal estimation.

eess.SP↗

arXiv2026

Master-Assisted Distributed Uplink Operation for Cell-Free Massive MIMO Networks

Cell-free massive multiple-input-multiple-output is considered a promising technology for the next generation of wireless communication networks. The main idea is to distribute a large number of access points (APs) in a geographical region to serve the user equipments (UEs) cooperatively. In the uplink, one of two types of operations is often adopted: centralized or distributed. In centralized operation, channel estimation and data decoding are performed at the central processing unit (CPU), whereas in distributed operation, channel estimation occurs at the APs and data detection at the CPU. In this paper, we propose a novel uplink operation, termed Master-Assisted Distributed Uplink Operation (MADUO), where each UE is assigned a master AP, which receives soft data estimates from the other APs and decodes the data using its local signals and the received data estimates. Numerical experiments demonstrate that the proposed operation performs comparably to the centralized operation and balances fronthaul signaling and computational complexity.

eess.SP↗

arXiv2025

Identifiability Conditions for Acoustic Feedback Cancellation with the Two-Channel Adaptive Feedback Canceller Algorithm

In audio signal processing applications with a microphone and a loudspeaker within the same acoustic environment, the loudspeaker signals can feed back into the microphone, thereby creating a closed-loop system that potentially leads to system instability. To remove this acoustic coupling, prediction error method (PEM) feedback cancellation algorithms aim to identify the feedback path between the loudspeaker and the microphone by assuming that the input signal can be modelled by means of an autoregressive (AR) model. It has previously been shown that this PEM framework and resulting algorithms can identify the feedback path correctly in cases where the forward path from microphone to loudspeaker is sufficiently time-varying or non-linear, or when the forward path delay equals or exceeds the order of the AR model. In this paper, it is shown that this delay-based condition can be generalised for one particular PEM-based algorithm, the so-called two-channel adaptive feedback canceller (2ch-AFC), to an invertibility-based condition, for which it is shown that identifiability can be achieved when the order of the forward path feedforward filter exceeds the order of the AR model. Additionally, the condition number of inversion of the correlation matrix as used in the 2ch-AFC algorithm can serve as a measure for monitoring the identifiability.

eess.AS↗

arXiv2025

A Generalized Weighted Overlap-Add (WOLA) Filter Bank for Improved Subband System Identification

This paper addresses the challenges in short-time Fourier transform (STFT) domain subband adaptive filtering, in particular, subband system identification. Previous studies in this area have primarily focused on setups with subband filtering at a downsampled rate, implemented using the weighted overlap-add (WOLA) filter bank, popular in audio and speech-processing for its reduced complexity. However, this traditional approach imposes constraints on the subband filters when transformed to their full-rate representation. This paper makes three key contributions. First, it introduces a generalized WOLA filter bank that repositions subband filters before the downsampling operation, eliminating the constraints on subband filters inherent in the conventional WOLA filter bank. Second, it investigates the mean square error (MSE) performance of the generalized WOLA filter bank for full-band system identification, establishing analytical ties between the order of subband filters, the full-band system impulse response length, the decimation factor, and the prototype filters. Third, to address the increased computational complexity of the generalized WOLA, the paper proposes a low-complexity implementation termed per-tone weighted overlap-add (PT-WOLA), which maintains computational complexity on par with conventional WOLA. Analytical and empirical evidence demonstrates that the proposed generalized WOLA filter bank significantly enhances the performance of subband system identification.

eess.AS↗

arXiv2025

Sound field estimation with moving microphones using kernel ridge regression

Sound field estimation with moving microphones can increase flexibility, decrease measurement time, and reduce equipment constraints compared to using stationary microphones. In this paper a sound field estimation method based on kernel ridge regression (KRR) is proposed for moving microphones. The proposed KRR method is constructed using a discrete time continuous space sound field model based on the discrete Fourier transform and the Herglotz wave function. The proposed method allows for the inclusion of prior knowledge as a regularization penalty, similar to kernel-based methods with stationary microphones, which is novel for moving microphones. Using a directional weighting for the proposed method, the sound field estimates are improved, which is demonstrated on both simulated and real data. Due to the high computational cost of sound field estimation with moving microphones, an approximate KRR method is proposed, using random Fourier features (RFF) to approximate the kernel. The RFF method is shown to decrease computational cost while obtaining less accurate estimates compared to KRR, providing a trade-off between cost and performance.

eess.AS↗

arXiv2025

Time-domain sound field estimation using kernel ridge regression

Sound field estimation methods based on kernel ridge regression have proven effective, allowing for strict enforcement of physical properties, in addition to the inclusion of prior knowledge such as directionality of the sound field. These methods have been formulated for single-frequency sound fields, restricting the types of data and prior knowledge that can be used. In this paper, the kernel ridge regression approach is generalized to consider discrete-time sound fields. The proposed method provides time-domain sound field estimates that can be computed in closed form, are guaranteed to be physically realizable, and for which time-domain properties of the sound fields can be exploited to improve estimation performance. Exploiting prior information on the time-domain behaviour of room impulse responses, the estimation performance of the proposed method is shown to be improved using a time-domain data weighting, demonstrating the usefulness of the proposed approach. It is further shown using both simulated and real data that the time-domain data weighting can be combined with a directional weighting, exploiting prior knowledge of both spatial and temporal properties of the room impulse responses. The theoretical framework of the proposed method enables solving a broader class of sound field estimation problems using kernel ridge regression where it would be required to consider the time-domain response rather than the frequency-domain response of each frequency separately.

eess.AS↗

arXiv2025

Improved Topology-Independent Distributed Adaptive Node-Specific Signal Estimation for Wireless Acoustic Sensor Networks

This paper addresses the challenge of topology-independent (TI) distributed adaptive node-specific signal estimation (DANSE) in wireless acoustic sensor networks (WASNs) where sensor nodes exchange only fused versions of their local signals. An algorithm named TI-DANSE has previously been presented to handle non-fully connected WASNs. However, its slow iterative convergence towards the optimal solution limits its applicability. To address this, we propose in this paper the TI-DANSE+ algorithm. At each iteration in TI-DANSE+, the node set to update its local parameters is allowed to exploit each individual partial in-network sums transmitted by its neighbors in its local estimation problem, increasing the available degrees of freedom and accelerating convergence with respect to TI-DANSE. Additionally, a tree-pruning strategy is proposed to further increase convergence speed. TI-DANSE+ converges as fast as the DANSE algorithm in fully connected WASNs while reducing transmit power usage. The convergence properties of TI-DANSE+ are demonstrated in numerical simulations.

eess.AS↗

arXiv2025

Fast-Converging Distributed Signal Estimation in Topology-Unconstrained Wireless Acoustic Sensor Networks

This paper focuses on distributed signal estimation in topology-unconstrained wireless acoustic sensor networks (WASNs) where sensor nodes only transmit fused versions of their local sensor signals. For this task, the topology-independent (TI) distributed adaptive node-specific signal estimation (DANSE) algorithm (TI-DANSE) has previously been proposed. It converges towards the centralized signal estimation solution in non-fully connected and time-varying network topologies. However, the applicability of TI-DANSE in real-world scenarios is limited due to its slow convergence. The latter results from the fact that, in TI-DANSE, nodes only have access to the in-network sum of all fused signals in the WASN. We address this low convergence speed by introducing an improved TI-DANSE algorithm, referred to as TI-DANSE+, in which updating nodes separately use the partial in-network sums of fused signals coming from each of their neighbors. Nodes can maximize the number of available degrees of freedom in their local optimization problem, leading to faster convergence. This is further exploited by combining TI-DANSE+ with a tree-pruning strategy that maximizes the number of neighbors at the updating node. In fully connected WASNs, TI-DANSE+ converges as fast as the original DANSE algorithm (the latter only defined for fully connected WASNs) while using peer-to-peer data transmission instead of broadcasting and thus saving communication bandwidth. If link failures occur, the convergence of TI-DANSE+ towards the centralized solution is preserved without any change in its formulation. Altogether, the proposed TI-DANSE+ algorithm can be viewed as an all-round alternative to DANSE and TI-DANSE which (i) merges the advantages of both, (ii) reconciliates their differences into a single formulation, and (iii) shows advantages of its own in terms of communication bandwidth usage.

eess.AS↗

arXiv2025

A Comparative Analysis of Generalised Echo and Interference Cancelling and Extended Multichannel Wiener Filtering for Combined Noise Reduction and Acoustic Echo Cancellation

Two algorithms for combined acoustic echo cancellation (AEC) and noise reduction (NR) are analysed, namely the generalised echo and interference canceller (GEIC) and the extended multichannel Wiener filter (MWFext). Previously, these algorithms have been examined for linear echo paths, and assuming access to voice activity detectors (VADs) that separately detect desired speech and echo activity. However, algorithms implementing VADs may introduce detection errors. Therefore, in this paper, the previous analyses are extended by 1) modelling general nonlinear echo paths by means of the generalised Bussgang decomposition, and 2) modelling VAD error effects in each specific algorithm, thereby also allowing to model specific VAD assumptions. It is found and verified with simulations that, generally, the MWFext achieves a higher NR performance, while the GEIC achieves a more robust AEC performance.

eess.AS↗

arXiv2024

Integrated Minimum Mean Squared Error Algorithms for Combined Acoustic Echo Cancellation and Noise Reduction

In many speech recording applications, noise and acoustic echo corrupt the desired speech. Consequently, combined noise reduction (NR) and acoustic echo cancellation (AEC) is required. Generally, a cascade approach is followed, i.e., the AEC and NR are designed in isolation by selecting a separate signal model, separate cost function, and separate solution strategy. The AEC and NR are then cascaded one after the other, not accounting for their interaction. In this paper, an integrated approach is proposed to consider this interaction in a general multi-microphone/multi-loudspeaker setup. Therefore, a single signal model of either the microphone signal vector or the extended signal vector, obtained by stacking microphone and loudspeaker signals, is selected, a single mean squared error cost function is formulated, and a common solution strategy is used. Using this microphone signal model, a multi-channel Wiener filter (MWF) is derived. Using the extended signal model, it is shown that an extended MWF (MWFext) can be derived, and several equivalent expressions can be found, which are nevertheless shown to be interpretable as cascade algorithms. Specifically, the MWFext is shown to be equivalent to algorithms where the AEC precedes the NR (AEC-NR), the NR precedes the AEC (NR-AEC), and the extended NR (NRext) precedes the AEC and post-filter (PF) (NRext-AEC-PF). Under rank-deficiency conditions the MWFext is non-unique. Equivalence then amounts to the expressions being specific, not necessarily minimum-norm solutions, for this MWFext. The practical performances differ due to non-stationarities and imperfect correlation matrix estimation, with the AEC-NR and NRext-AEC-PF attaining best overall performance.

eess.AS↗

arXiv2024

One-Shot Distributed Node-Specific Signal Estimation with Non-Overlapping Latent Subspaces in Acoustic Sensor Networks

A one-shot algorithm called iterationless DANSE (iDANSE) is introduced to perform distributed adaptive node-specific signal estimation (DANSE) in a fully connected wireless acoustic sensor network (WASN) deployed in an environment with non-overlapping latent signal subspaces. The iDANSE algorithm matches the performance of a centralized algorithm in a single processing cycle while devices exchange fused versions of their multichannel local microphone signals. Key advantages of iDANSE over currently available solutions are its iterationless nature, which favors deployment in real-time applications, and the fact that devices can exchange fewer fused signals than the number of latent sources in the environment. The proposed method is validated in numerical simulations including a speech enhancement scenario.

eess.AS↗

arXiv2024

Cell-free Massive MIMO with Sequential Fronthaul Architecture and Limited Memory Access Points

Cell-free massive multiple-input multiple-output (CFmMIMO) is a paradigm that can improve users' spectral efficiency (SE) far beyond traditional cellular networks. Increased spatial diversity in CFmMIMO is achieved by spreading the antennas into small access points (APs), which cooperate to serve the users. Sequential fronthaul topologies in CFmMIMO, such as the daisy chain and multi-branch tree topology, have gained considerable attention recently. In such a processing architecture, each AP must store its received signal vector in the memory until it receives the relevant information from the previous AP in the sequence to refine the estimate of the users' signal vector in the uplink. In this paper, we adopt vector-wise and element-wise compression on the raw or pre-processed received signal vectors to store them in the memory. We investigate the impact of the limited memory capacity in the APs on the optimal number of APs. We show that with no memory constraint, having single-antenna APs is optimal, especially as the number of users grows. However, a limited memory at the APs restricts the depth of the sequential processing pipeline. Furthermore, we investigate the relation between the memory capacity at the APs and the rate of the fronthaul link.

eess.SP↗