arXiv subjects

Manuel Collet

Publications and source records attributed to Manuel Collet.

15 recordsLinked to original sources

arXiv2026

A model-inversion control strategy to attain desired equilibrium points when synthesizing nonlinear resonators

The initial conditions of a deterministic nonlinear system affects the attained asymptotic solutions. This is a problem when the nonlinear behaviour is achieved by active control synthesis, and the initial conditions are not accessible for pre-constraining. Meanwhile, the generalized impedance control is recently gaining increasing attention in acoustics, and has been enlarged to achieve nonlinear mechanical responses of Electroacoustic Resonators at low excitation levels. Nevertheless, as the initial conditions of Electroacoustic Resonators are hardly accessible, the equilibrium points actually showcased by the synthetic nonlinear dynamics are not advantageous for noise attenuation in cavities excited by realistic noise sources. In this paper, we propose a control strategy being able to attain the desired equilibrium points, due to the definition of an exosystem characterized by a desired nonlinear impedance and a synthetic external excitation. The exosystem dynamics is integrated in real time and its response is enforced in the actual system (in our case, the Electroacoustic Resonator), by a model-inversion feedforward strategy. The proposed algorithm is implemented in the Electroacoustic Resonator, and is validated both numerically and experimentally. In particular, the experimental testing is conducted both in a quasi-open acoustic environment, and in enclosed cavities for acoustic mode attenuation.

physics.app-ph↗

arXiv2026

Unveiling the key role of Interfaces in the Design of finite-sized Metamaterial Structures

This paper investigates the influence of interfaces on the performance of finite-sized mechanical metamaterial structures for vibration damping applications. The metamaterial structures are designed in a sandwich configuration in which two homogeneous plates are connected to a metamaterial array. We test four different arrays that are obtained from the same metamaterial by differently cutting the metamaterial's unit cell at the metamaterial/plate interface. When the four unit cells are periodically repeated in space, they create the same infinitely large metamaterial with an identical mechanical response. In finite-sized structures, however, the different interfaces between the metamaterial array and the plates~--~called ``material interfaces''~--~and between the metamaterial and the air~--~called ``free interfaces''~--~strongly affect the specimen's vibration transmission characteristics. Using experimental measurements and validated finite-element (FE) models, we demonstrate a significant influence of the different types of interfaces on the global responses and local displacement fields of the structures. We also demonstrate the presence of a vibroacoustic coupling in the structures which also depends on the type of metamaterial/plate interfaces. Furthermore, we explore optimization strategies for enhancing the vibration damping performance of the metamaterial structures considering not only the metamaterial array but also the adjacent structures (the homogeneous plates). A comparison with benchmark cases illustrates the optimization potential that the interfaces' design offers for the vibration damping capability of finite-sized metamaterial structures. We show that optimizing the type of targeted interfaces can shift a metamaterial's response from underperforming to significantly outperforming compared to classical solutions for noise and vibration damping in civil engineering.

physics.app-ph↗

arXiv2024

Analytical and experimental results: creation of a duffing acoustic nonlinear oscillator at low amplitudes

Nonlinear dynamics have long been exploited in order to damp vibrations in solid mechanics. The phenomenon of irreversible energy transfer from a linear primary system to a nonlinear absorber has driven great attention to the optimal design of vibration absorbers both for stationary and transient regimes. Recently, the same principle has also been targeted in acoustics for the absorption of sound waves at high excitation amplitudes. Meanwhile, acoustic absorption by electro-active means has found great success for noise reduction in the linear regime. This study uses a method allowing the design of nonlinear resonators at amplitudes that typically induce linear behaviors. This research proposes an analytical study of the implementation of the duffing equation as a nonlinear electroacoustic resonator coupled to an acoustic mode of a tube. Experiments are carried out and compared to the analytical results. The experimental implementation is done using a real-time-based algorithm retrieving the measured pressure from a microphone and giving the electrical current to send to a loudspeaker as an output thanks to a Runge-Kutta-like algorithm.

physics.app-ph↗

arXiv2024

Design and experimental validation of a finite-size labyrinthine metamaterial for vibro-acoustics: enabling upscaling towards large-scale structures

In this paper, we present the design and experimental validation of a labyrinthine metamaterial for vibro-acoustic applications. Based on a 2D unit cell, different designs of finite-size metamaterial specimens in a sandwich configuration including two plates are proposed. The design phase includes an optimisation based on Bloch-Floquet analysis with the aims of maximising the band gap and extruding the specimens in the third dimension while keeping the absorption properties almost unaffected. By manufacturing and experimentally testing finite-sized specimens, we assess their capacity to mitigate vibrations in vibro-impact tests. The experiments confirm a band gap in the low- to mid-frequency range. Numerical models are employed to validate the experiments and to examine additional vibro-acoustic load cases. The metamaterial's performances are compared to benchmark solutions, usually employed for noise and vibration mitigation, showing a comparable efficacy in the band gap region. To eventually improve the metamaterial's performance, we optimise its interaction with the air and test different types of connections between the metamaterial and the homogeneous plates. This finally leads to metamaterial samples largely exceeding the benchmark performances in the band gap region and reveal the potential of interfaces for performance optimisation of composed structures.

physics.app-ph↗

arXiv2024

The Advection Boundary Law in absence of mean flow: passivity, nonreciprocity and enhanced noise transmission attenuation

Sound attenuation along a waveguide is intensively studied for applications ranging from heating and air-conditioning ventilation systems, to aircraft turbofan engines. In particular, the new generation of Ultra-High-By-Pass-Ratio turbofan requires higher attenuation at low frequencies, in less space for liner treatment. This demands to go beyond the classical acoustic liner concepts and overcome their limitations. In this paper, we discuss an unconventional boundary operator, called Advection Boundary Law, which can be artificially synthesized by electroactive means, such as Electroacoustic Resonators. This boundary condition entails nonreciprocal propagation, meanwhile enhancing noise transmission attenuation with respect to purely locally-reacting boundaries, along one sense of propagation. Because of its artificial nature though, its acoustical passivity limits are yet to be defined. In this paper, we provide a thorough numerical study to assess the performances of the Advection Boundary Law, in absence of mean flow. An experimental test-bench validates the numerical outcomes in terms of passivity limits, non-reciprocal propagation and enhanced isolation with respect to local impedance operators. This work provides the guidelines to properly implement the Advection Boundary Law for optimal noise transmission attenuation. Moreover, the tools and criteria provided here can also be employed for the design and characterization of other innovative liners.

physics.app-ph↗

arXiv2021

Innovative Electroacoustic resonator Control enforcing Duffing dynamics at moderate excitation levels: conception and experimental validation

The electroacoustic resonator is an effcient electro-active device for noise attenuation in enclosed cavities or acoustic waveguides. It is made of a loudspeaker (the actuator) and one or more microphones (the sensors). So far, the desired acoustic behaviour, expressed in terms of a linear relationship between sound pressure and vibrational motion, has been more efficiently achieved by a model-inversion strategy which is implemented by driving the electrical current in the loudspeaker coil, based upon the measured pressure. The corrector transfer function is hence digitally executed by the classical infinite-impulse response technique. In order to enforce non-linear, instead of linear, operators between the pressure and vibrational motion of the speaker diaphragm, in the same pressure-based, current-driven architecture, the transfer-function-based control strategies must be abandoned. In this manuscript, we present a novel technique based upon real-time integration of potentially any target dynamics (either linear or nonlinear). Then, we experimentally validate such control strategy by enforcing a Duffing type dynamics at excitation levels far below the linearity limit of the mechano-acoustical dynamics of the resonator. Such control strategy demonstrates to efficiently reproduce nonlinear operators, opening the doors for the experimental investigation of noise-control by a potentially vast spectrum of programmable non-linear boundaries, under the ordinary sound excitation levels.

physics.app-ph↗

arXiv2020

Design and characterization of an instrumented slider aimed atmeasuring local micro-impact forces between dry rough solids

Sliding motion between two rough solids under light normal loading involves myriad micro-impacts between antagonist micro-asperities. Those micro-impacts are at the origin of many emerging macroscopic phenomena, including the friction force, the slider's vibrations and the noise radiated in the surroundings. However, the individual properties of the micro-impacts (e.g. maximum force, position along the interface, duration) are essentially elusive to measurement. Here, we introduce an instrumented slider aimed at measuring the position and the normal component of the micro-impact forces during sliding against a rough track. It is based on an array of piezoelectric sensors, each placed under a single model asperity. Its dynamical characteristics are established experimentally and compared to a finite elements model. We then validate its measurement capabilities by using it against a track bearing simple, well-defined topographical features. The measurements are interpreted thanks to a simple multi-asperity contact model. Our slider is expected to be useful in future studies to provide local insights into a variety of tribological questions involving dry rough sliding interfaces.

physics.class-ph↗

arXiv2020

Exploring metamaterials' structures through the relaxed micromorphic model: switching an acoustic screen into an acoustic absorber

While the design of always new metamaterials with exotic static and dynamic properties is attracting deep attention in the last decades, little effort is made to explore their interactions with other materials. This prevents the conception of (meta-)structures that can enhance metamaterials' unorthodox behaviours and that can be employed in real engineering applications. In this paper, we give a first answer to this challenging problem by showing that the relaxed micromorphic model with zero static characteristic length can be usefully applied to describe the refractive properties of simple meta-structures for extended frequency ranges and for any direction of propagation of the incident wave. Thanks to the simplified model's structure, we are able to efficiently explore different configurations and to show that a given meta-structure can drastically change its overall refractive behaviour when varying the elastic properties of specific meta-structural elements. In some cases, changing the stiffness of a homogeneous material which is in contact with a metamaterial's slab, reverses the structure's refractive behaviour by switching it from an acoustic screen (total reflection) into an acoustic absorber (total transmission). The present paper clearly indicates that, while the study and enhancement of the intrinsic metamaterials' properties is certainly of great importance, it is even more challenging to enable the conception of meta-structures that can eventually boost the use of metamaterials in real-case applications.

physics.app-ph↗

arXiv2019

Experimental Realization of a Reconfigurable Electroacoustic Topological Insulator

A substantial challenge in guiding elastic waves is the presence of reflection and scattering at sharp edges, defects, and disorders. Recently, mechanical topological insulators have sought to overcome this challenge by supporting back-scattering resistant wave transmission. In this Letter, we propose and experimentally demonstrate the first \emph{reconfigurable electroacoustic} topological insulator exhibiting an analog to the quantum valley Hall effect (QVHE). Using programmable switches, this phononic structure allows for rapid reconfiguration of domain walls and thus the ability to control back-scattering resistant wave propagation along dynamic interfaces for phonons lying in static and finite-frequency regimes. Accordingly, a graphene-like Polyactic Acid (PLA) layer serves as the host medium, equipped with periodically arranged and bonded piezoelectric patches, resulting in two Dirac cones at the $K-$points. The PZT patches are then connected to negative capacitance external circuits to break inversion symmetry and create nontrivial topologically-protected bandgaps. As such, topologically protected interface waves are demonstrated numerically and validated experimentally for different predefined trajectories over a broad frequency range.

physics.app-ph↗

arXiv2019

Numerical optimization of a prestressed auxetic metamaterial for vibration isolation

We present a numerical study on an enhanced periodic auxetic metamaterial. Rotating squares mechanism allied to precompression induced buckling give these elastic structures exotic properties. The static properties of the reference structure and the enhanced ones are first compared. After numerical analysis to ascertain the differences between several band calculation methods, we demonstrate the effect of precompression issued stress field on the dispersion diagram of the metamaterial. An optimization study is then performed to assess the potential vibration isolation improvement obtained with the new design. As a result, the bandgaps widths and range are found to be greatly increased by the geometric modifications proposed.

physics.app-ph↗

arXiv2019

Broadband nonreciprocal acoustic propagation using programmable boundary conditions: from analytical modelling to experimental implementation

In this paper, we theoretically, numerically and experimentally demonstrate the acoustic isolator effect in a 1D waveguide with direction dependent controlled boundary conditions. A theoretical model is used to explain the principle of non reciprocal propagation in boundary controlled waveguides. Numerical simulations are carried out on a reduced model to show the non-reciprocity as well as the passivity of the system, through the computation of the scattering matrix and the power delivered by the system. Finally, an experimental implementation validate the potential of programmable boundary conditions for non reciprocal propagation.

physics.app-ph↗

arXiv2017

Broadband acoustic isolator in the audible range : nonreciprocal acoustic propagation using programmable boundary conditions

We propose a novel concept of nonreciprocal devices in acoustics, illustrated by the design of an acoustic diode, or isolator. A boundary control strategy was previously shown to provide direction-dependent propagation properties in acoustic waveguides. In this paper, the boundary control is reinterpreted as a source term for the inhomogeneous wave equation, in a purely 1D model. Nonreciprocity is then obtained using a distributed source that replaces the non-standard boundary condition where the normal velocity at the boundary is a function of both pressure and its tangential derivative. Numerical simulations are carried out to validate the theoretical model, and the scattering matrix of the device is retrieved to investigate the nonreciprocal nature of the system. Results show that the proposed device can lead to an efficient, ultra-broadband, sub-wavelength, acoustic isolator. Finally, the effects of actual, finite-sized transducers on the performance of the acoustic isolator are discussed.

physics.app-ph↗

arXiv2017

Relaxed micromorphic modeling of the interface between a homogeneous solid and a band-gap metamaterial: new perspectives towards meta-structural design

In the present paper, the material parameters of the isotropic relaxed micromorphic model derived for a specific metamaterial in a previous contribution are used to model its transmission properties. Specifically, the reflection and transmission coefficients at an interface between a homogeneous solid and the chosen metamaterial are analyzed by using both the relaxed micromorphic model and a direct FEM implementation of the detailed microstructure. The obtained results show an excellent agreement between the transmission spectra derived via our enriched continuum model and those issued by the direct FEM simulation. Such excellent agreement validates the indirect measure of the material parameters and opens the way towards an efficient meta-structural design.

cond-mat.mtrl-sci↗

arXiv2016

Modeling real phononic crystals via the weighted relaxed micromorphic model with free and gradient micro-inertia

In this paper the relaxed micromorphic continuum model with weighted free and gradient micro-inertia is used to describe the dynamical behavior of a real two-dimensional phononic crystal for a wide range of wavelengths. In particular, a periodic structure with specific micro-structural topology and mechanical properties, capable of opening a phononic band-gap, is chosen with the criterion of showing a low degree of anisotropy (the band-gap is almost independent of the direction of propagation of the traveling wave). A Bloch wave analysis is performed to obtain the dispersion curves and the corresponding vibrational modes of the periodic structure. A linear-elastic, isotropic, relaxed micromorphic model including both a free micro-inertia (related to free vibrations of the microstructures) and a gradient micro-inertia (related to the motions of the microstructure which are coupled to the macro-deformation of the unit cell) is introduced and particularized to the case of plane wave propagation. The parameters of the relaxed model, which are independent of frequency, are then calibrated on the dispersion curves of the phononic crystal showing an excellent agreement in terms of both dispersion curves and vibrational modes. Almost all the homogenized elastic parameters of the relaxed micromorphic model result to be determined. This opens the way to the design of morphologically complex meta-structures which make use of the chosen phononic structure as the basic building block and which preserve its ability of "stopping" elastic wave propagation at the scale of the structure.

physics.class-ph↗

arXiv2009

Experimental Evaluation of the Rheological Properties of Veriflex Shape Memory Polymer

Shape memory polymers (SMPs) are materials with a great potential for future use in smart materials and structures. When heated from cold state (below the transformation temperature, which can either be the glass transition temperature or the melting temperature of the polymer) to hot state (above the transformation temperature) they undergo transformation which can be compared with martensitic transformation of shape memory alloys. This process induces great changes of the mechanical properties and some shape memory phenomenon can be observed. This study is an experimental evaluation of the mechanical properties of SMP Veriflex under different test conditions. Veriflex was chosen because of its easy accessibility. Furthermore its properties are similar to epoxy resins which make it very suitable for usage in a wide variety of technical applications. Dynamic mechanical analysis (DMA) was used to determine evolution of the viscoelastic properties versus temperature and frequency under cyclic harmonic loading. The glass transition temperature clearly appears in a range from 45\degree C to 60\degree C depending on loading frequency. The glass transition is noticeably marked by an impressive decrease in the storage modulus of about 4 decades. The master curve of Veriflex was created and allows the time-temperature superposition to be constructed for this material. Thermo-mechanical working cycle of SMP with 100% elongation was also experimentally tested. Finally results from all these experimental investigations were used to design a demonstrator showing the possibility of application in engineering and especially for shape control.

cond-mat.soft↗