arXiv subjects

M. Stephens

Publications and source records attributed to M. Stephens.

5 recordsLinked to original sources

arXiv2021

Measurement of the ($\pi^-$, Ar) total hadronic cross section at the LArIAT experiment

We present the first measurement of the negative pion total hadronic cross section on argon, which we performed at the Liquid Argon In A Testbeam (LArIAT) experiment. All hadronic reaction channels, as well as hadronic elastic interactions with scattering angle greater than 5~degrees are included. The pions have a kinetic energies in the range 100-700~MeV and are produced by a beam of charged particles impinging on a solid target at the Fermilab Test Beam Facility. LArIAT employs a 0.24~ton active mass Liquid Argon Time Projection Chamber (LArTPC) to measure the pion hadronic interactions. For this measurement, LArIAT has developed the ``thin slice method", a new technique to measure cross sections with LArTPCs. While generally higher than the prediction, our measurement of the ($\pi^-$,Ar) total hadronic cross section is in agreement with the prediction of the Geant4 model when considering a model uncertainty of $\sim$5.1\%.

hep-ex↗

arXiv2019

The Liquid Argon In A Testbeam (LArIAT) Experiment

The LArIAT liquid argon time projection chamber, placed in a tertiary beam of charged particles at the Fermilab Test Beam Facility, has collected large samples of pions, muons, electrons, protons, and kaons in the momentum range 300-1400 MeV/c. This paper describes the main aspects of the detector and beamline, and also reports on calibrations performed for the detector and beamline components.

physics.ins-det↗

arXiv2017

Carbon Nanotube-Based Black Coatings

Coatings comprised of carbon nanotubes are very black; that is, characterized by low reflectance over a broad wavelength range from the visible to far infrared. Arguably there is no other material that is comparable. This is attributable to the intrinsic properties of graphene as well as the morphology (density, thickness, disorder, tube size) of the coating. The need for black coatings is persistent for a variety of applications such as baffles and traps for space instruments. Because of the thermal properties, nanotube coatings are also well suited for thermal detectors, blackbodies and other applications where light is trapped and converted to heat. We briefly describe a history of other coatings such as nickel phosphorous, gold black and carbon-based paints and the comparable structural morphology that we associate with very black coatings. In many cases, it is a significant challenge to put the blackest coating on something useful. We describe the growth of carbon nanotube forests on substrates such as metals and silicon along with the catalyst requirements and temperature limitations. We also describe coatings derived from carbon nanotubes and applied like paint. Another significant challenge is that of building the measurement apparatus and determining the optical properties of something having negligible reflectance. There exists information in the literature for effective media approximations to model the dielectric function of vertically aligned arrays. We summarize this as well as other approaches that are useful for predicting the coating behavior along with the refractive index of graphite from the literature that is necessary for the models we know of. We provide an appendix of our best recipes for making as-grown, sprayed or other coatings for the blackest and most robust coating for a chosen substrate and a description of reflectance measurements.

physics.app-ph↗

arXiv2014

LArIAT: Liquid Argon In A Testbeam

Liquid Argon Time Projection Chambers (LArTPCs) are ideal detectors for precision neutrino physics. These detectors, when located deep underground, can also be used for measurements of proton decay, and astrophysical neutrinos. The technology must be completely developed, up to very large mass scales, and fully mastered to construct and operate these detectors for this physics program. As part of an integrated plan of developing these detectors, accurate measurements in LArTPC of known particle species in the relevant energy ranges are now deemed as necessary. The LArIAT program aims to directly achieve these goals by deploying LArTPC detectors in a dedicated calibration test beam line at Fermilab. The set of measurements envisaged here are significant for both the short-baseline (SBN) and long-baseline (LBN) neutrino oscillation programs in the US, starting with MicroBooNE in the near term and with the adjoint near and far liquid argon detectors in the Booster beam line at Fermilab envisioned in the mid-term, and moving towards deep underground physics such as with the long-baseline neutrino facility (LBNF) in the longer term.

physics.ins-det↗

arXiv2004

Swift's Ability to Detect Gamma-Ray Bursts

The Swift satellite will be a self-contained observatory that will bring new capabilities to the observing of the early afterglow emission of Gamma-ray Bursts. Swift is completely autonomous and will do all of the observations without help from the ground. There are three instruments on Swift. A large (5200 sq cm) coded aperture imager will locate the bursts within about 15 seconds. The satellite will be able to slew to point at the location within a minute or two. There are two narrow field of view instruments: an optical telescope and an x-ray telescope. Thus, Swift will provide simultaneous gamma-ray, x-ray, and optical observations of Gamma-ray bursts soon after the burst. A key to the success of Swift will be its ability to detect and locate a large number of gamma-ray bursts quick enough that the narrow field of view instruments can follow up. The results of simulations show that Swift will be able to detect about 300 bursts a year and locate about 150. The number that Swift will be able to slew to depends on constraints built into the satellite bus. Preliminary results indicate that we might be able to slew to 100 bursts per year, but that is heavily dependent on satellite operations.

astro-ph↗