arXiv subjects

M. Scheffler

Publications and source records attributed to M. Scheffler.

At least 19 recordsLinked to original sources

arXiv2020

Investigating the ranges of (meta)stable phase formation in (InxGa1-x)2O3: Impact of the cation coordination

We investigate the phase diagram of the heterostructural solid solution (InxGa1-x)2O3 both computationally, by combining cluster expansion and density functional theory, and experimentally, by means of TEM measurements of pulsed laser deposited (PLD) heteroepitaxial thin films. The shapes of the Gibbs free energy curves for the monoclinic, hexagonal and cubic bixbyite alloy as a function of composition can be explained in terms of the preferred cation coordination environments of indium and gallium. We show by atomically resolved STEM that the strong preference of indium for six-fold coordination results in ordered monoclinic and hexagonal lattices. This ordering impacts the configurational entropy in the solid solution and thereby the (InxGa1-x)2O3 phase diagram. The resulting phase diagram is characterized by very limited solubilities of gallium and indium in the monoclinic, hexagonal and cubic ground state phases respectively but exhibits wide metastable ranges at realistic growth temperatures. On the indium rich side of the phase diagram a wide miscibility gap is found, which results in phase separated layers. The experimentally observed indium solubilities in the PLD samples are in the range of x=0.45 and x=0.55 for monoclinic and hexagonal single-phase films, while for phase separated films we find x=0.5 for the monoclinic phase, x=0.65-0.7 for the hexagonal phase and x>0.9 for the cubic phase. These values are consistent with the computed metastable ranges for each phase.

cond-mat.mtrl-sci↗

arXiv2018

Optimizations of the Eigensolvers in the ELPA Library

The solution of (generalized) eigenvalue problems for symmetric or Hermitian matrices is a common subtask of many numerical calculations in electronic structure theory or materials science. Solving the eigenvalue problem can easily amount to a sizeable fraction of the whole numerical calculation. For researchers in the field of computational materials science, an efficient and scalable solution of the eigenvalue problem is thus of major importance. The ELPA-library is a well-established dense direct eigenvalue solver library, which has proven to be very efficient and scalable up to very large core counts. In this paper, we describe the latest optimizations of the ELPA-library for new HPC architectures of the Intel Skylake processor family with an AVX-512 SIMD instruction set, or for HPC systems accelerated with recent GPUs. We also describe a complete redesign of the API in a modern modular way, which, apart from a much simpler and more flexible usability, leads to a new path to access system-specific performance optimizations. In order to ensure optimal performance for a particular scientific setting or a specific HPC system, the new API allows the user to influence in straightforward way the internal details of the algorithms and of performance-critical parameters used in the ELPA-library. On top of that, we introduced an autotuning functionality, which allows for finding the best settings in a self-contained automated way. In situations where many eigenvalue problems with similar settings have to be solved consecutively, the autotuning process of the ELPA-library can be done "on-the-fly". Practical applications from materials science which rely on so-called self-consistency iterations can profit from the autotuning. On some examples of scientific interest, simulated with the FHI-aims application, the advantages of the latest optimizations of the ELPA-library are demonstrated.

cs.MS↗

arXiv2018

An ultra-high vacuum scanning tunneling microscope operating at sub-Kelvin temperatures and high magnetic fields for spin-resolved measurements

We present the construction and performance of an ultra-low temperature scanning tunneling microscope (STM), working in ultra-high vacuum conditions (UHV) and in high magnetic fields up to 9 T. The cryogenic environment of the STM is generated by a single shot $^3$He magnet cryostat in combination with a $^4$He dewar system. At base temperature (300~mK), the cryostat has an operation time of approximately 80 hours. The special design of the microscope allows the transfer of the STM head from the cryostat to a UHV-chamber system, where samples and STM-tips can be easily exchanged. The UHV chambers are equipped with specific surface science treatment tools for the functionalization of samples and tips, including high-temperature treatments and thin film deposition. This, particularly, enables spin-resolved tunneling measurements. We present test measurements using well known samples and tips based on superconductor and metallic materials such as LiFeAs, Nb, Fe and W, respectively. The measurements demonstrate the outstanding performance of the STM with high spatial and energy resolution as well as the spin-resolved capability.

cond-mat.str-el↗

arXiv2017

Insightful classification of crystal structures using deep learning

Computational methods that automatically extract knowledge from data are critical for enabling data-driven materials science. A reliable identification of lattice symmetry is a crucial first step for materials characterization and analytics. Current methods require a user-specified threshold, and are unable to detect average symmetries for defective structures. Here, we propose a machine-learning-based approach to automatically classify structures by crystal symmetry. First, we represent crystals by calculating a diffraction image, then construct a deep-learning neural-network model for classification. Our approach is able to correctly classify a dataset comprising more than 100 000 simulated crystal structures, including heavily defective ones. The internal operations of the neural network are unraveled through attentive response maps, demonstrating that it uses the same landmarks a materials scientist would use, although never explicitly instructed to do so. Our study paves the way for crystal-structure recognition of - possibly noisy and incomplete - three-dimensional structural data in big-data materials science.

cond-mat.mtrl-sci↗

arXiv2016

Uncovering structure-property relationships of materials by subgroup discovery

Subgroup discovery (SGD) is presented here as a data-mining approach to help find interpretable local patterns, correlations, and descriptors of a target property in materials-science data. Specifically, we will be concerned with data generated by density-functional theory calculations. At first, we demonstrate that SGD can identify physically meaningful models that classify the crystal structures of 82 octet binary semiconductors as either rocksalt or zincblende. SGD identifies an interpretable two-dimensional model derived from only the atomic radii of valence s and p orbitals that properly classifies the crystal structures for 79 of the 82 octet binary semiconductors. The SGD framework is subsequently applied to 24 400 configurations of neutral gas-phase gold clusters with 5 to 14 atoms to discern general patterns between geometrical and physicochemical properties. For example, SGD helps find that van der Waals interactions within gold clusters are linearly correlated with their radius of gyration and are weaker for planar clusters than for nonplanar clusters. Also, a descriptor that predicts a local linear correlation between the chemical hardness and the cluster isomer stability is found for the even-sized gold clusters.

cond-mat.mtrl-sci↗

arXiv2014

Structural study of monolayer cobalt phthalocyanine adsorbed on graphite

We present microscopic investigations on the two-dimensional arrangement of cobalt phthalocyanine molecules on a graphite (HOPG) substrate in the low coverage regime. The initial growth and ordering of molecular layers is revealed in high resolution scanning tunneling microscopy (STM). On low coverages single molecules orient mostly along one of the substrate lattice directions, while they form chains at slightly higher coverage. Structures with two different unit cells can be found from the first monolayer on. A theoretical model based on potential energy calculations is presented, which relates the two phases to the driving ordering forces.

physics.chem-ph↗

arXiv2013

Low-energy electronic properties of clean CaRuO$_3$: elusive Landau quasiparticles

We have prepared high-quality epitaxial thin films of CaRuO$_3$ with residual resistivity ratios up to 55. Shubnikov-de Haas oscillations in the magnetoresistance and a $T^2$ temperature dependence in the electrical resistivity only below 1.5 K, whose coefficient is substantially suppressed in large magnetic fields, establish CaRuO$_3$ as a Fermi liquid (FL) with anomalously low coherence scale. Non-Fermi liquid (NFL) $T^{3/2}$ dependence is found between 2 and 25 K. The high sample quality allows access to the intrinsic electronic properties via THz spectroscopy. For frequencies below 0.6 THz, the conductivity is Drude-like and can be modeled by FL concepts, while for higher frequencies non-Drude behavior, inconsistent with FL predictions, is found. This establishes CaRuO$_3$ as a prime example of optical NFL behavior in the THz range.

cond-mat.str-el↗

arXiv2012

Broadband electron spin resonance from 500 MHz to 40 GHz using superconducting coplanar waveguides

We present non-conventional electron spin resonance (ESR) experiments using microfabricated superconducting waveguides. We show that a very broad frequency range, from 0.5 to 40 GHz, becomes accessible with a high frequency accuracy of less than 1 MHz at low temperatures down to 1.6 K and in fields up to 1.4 T. This allows an accurate inspection of the ESR absorption position in the frequency domain, in contrast to the more common observation in the field domain. We demonstrate the applicability of frequency-swept ESR on Cr3+ atoms in ruby as well as on organic radicals of the Nitronyl-nitroxide family (using the 2-(4'-methoxyphenyl)-4,4,5,5-tetra-methylimidazoline-1-oxyl-3-oxide, a.k.a. NitPhOMe). Measurements between 1.6 and 30 K reveal a small frequency shift of the ESR and a resonance broadening below the critical temperature, which we both attribute to a modification of the magnetic field configuration due to the appearance of shielding currents.

cond-mat.mes-hall↗

arXiv2012

Anisotropic optical conductivity of the putative Kondo insulator CeRu$_4$Sn$_6$

Kondo insulators and in particular their non-cubic representatives have remained poorly understood. Here we report on the development of an anisotropic energy pseudogap in the tetragonal compound CeRu$_4$Sn$_6$ employing optical reflectivity measurements in broad frequency and temperature ranges, and local density approximation plus dynamical mean field theory calculations. The calculations provide evidence for a Kondo insulator-like response within the $a-a$ plane and a more metallic response along the c axis and qualitatively reproduce the experimental observations, helping to identify their origin.

cond-mat.str-el↗

arXiv2012

Broadening of hot-spot response spectrum of superconducting NbN nanowire single-photon detector with reduced nitrogen content

The spectral detection efficiency and the dark count rate of superconducting nanowire single-photon detectors (SNSPD) has been studied systematically on detectors made from thin NbN films with different chemical compositions. Reduction of the nitrogen content in the 4 nm thick NbN films results in a more than two orders of magnitude decrease of the dark count rates and in a red shift of the cut-off wavelength of the hot-spot SNSPD response. The observed phenomena are explained by an improvement of uniformity of NbN films that has been confirmed by a decrease of resistivity and an increase of the ratio of the measured critical current to the depairing current. The latter factor is considered as the most crucial for both the cut-off wavelength and the dark count rates of SNSPD. Based on our results we propose a set of criteria for material properties to optimize SNSPD in the infrared spectral region.

cond-mat.supr-con↗

arXiv2011

Reducing vortex losses in superconducting microwave resonators with microsphere patterned antidot arrays

We experimentally investigate the vortex induced energy losses in niobium coplanar waveguide resonators with and without quasihexagonal arrays of nanoholes (antidots), where large-area antidot patterns have been fabricated using self-assembling microsphere lithography. We perform transmission spectroscopy experiments around 6.25 and 12.5 GHz in magnetic field cooling and zero field cooling procedures with perpendicular magnetic fields up to B=27 mT at a temperature T=4.2 K. We find that the introduction of antidot arrays into resonators reduces vortex induced losses by more than one order of magnitude.

cond-mat.supr-con↗

arXiv2010

Modeling materials with optimized transport properties

Following demands for materials with peculiar transport properties, e.g. in magnetoelectronics or thermoelectrics, there is a need for materials modeling at the quantum-mechanical level. We combine density-functional with various scale-bridging tools to establish correlations between the macroscopic properties and the atomic structure of materials. For examples, magnetic memory devices exploiting the tunneling magneto-resistance (TMR) effect depend crucially on the spin polarization of the electrodes. Heusler alloys, e.g. Co2MnSi, if perfectly ordered, are ferromagnetic half-metals with (ideally) 100% spin polarization. Their performance as electrodes in TMR devices is limited by atomic disorder and deviations from perfect stoichiometry, but also by interface states at the tunneling barrier. We use ab initio thermodynamics in conjunction with the cluster expansion technique to show that excess manganese in the alloy and at the interface helps to preserve the desired half-metallic property. As another example, nanostructured materials with a reduced thermal conductivity but good electrical conductivity are sought for applications in thermoelectrics. Semiconductor heterostructures with a regular arrangement of nanoscale inclusions ('quantum dot superlattices') hold the promise of a high thermoelectric figure of merit. Our theoretical analysis reveals that an increased figure of merit is to be expected if the quantum dot size, the superlattice period and the doping level are all suitably fine-tuned. Such a superlattice thus constitutes a material whose transport properties are controlled by geometrical features at the nanoscale.

cond-mat.mtrl-sci↗

arXiv2010

Secondary structure of Ac-Ala$_n$-LysH$^+$ polyalanine peptides ($n$=5,10,15) in vacuo: Helical or not?

The polyalanine-based peptide series Ac-Ala_n-LysH+ (n=5-20) is a prime example that a secondary structure motif which is well-known from the solution phase (here: helices) can be formed in vacuo. We here revisit this conclusion for n=5,10,15, using density-functional theory (van der Waals corrected generalized gradient approximation), and gas-phase infrared vibrational spectroscopy. For the longer molecules (n=10,15) \alpha-helical models provide good qualitative agreement (theory vs. experiment) already in the harmonic approximation. For n=5, the lowest energy conformer is not a simple helix, but competes closely with \alpha-helical motifs at 300K. Close agreement between infrared spectra from experiment and ab initio molecular dynamics (including anharmonic effects) supports our findings.

physics.bio-ph↗

arXiv2009

Structural stability, magnetic and electronic properties of Co2MnSi(001)/MgO heterostructures: A density functional theory study

A computational study of the epitaxial Co2MnSi(001)/MgO(001) interface relevant to tunneling magnetoresistive (TMR) devices is presented. Employing ab initio atomistic thermodynamics, we show that the Co- or MnSi-planes of bulk-terminated Co2MnSi form stable interfaces, while pure Si or pure Mn termination requires non-equilibrium conditions. Except for the pure Mn interface, the half-metallic property of bulk Co2MnSi is disrupted by interface bands. Even so, at homogeneous Mn or Co interfaces these bands contribute little to the minority-spin conductance through an MgO barrier, and hence such terminations could perform strongly in TMR devices.

cond-mat.mtrl-sci↗

arXiv2005

Effect of post-growth annealing on the optical properties of InAs/GaAs quantum dots: A tight-binding study

We present an atomistic study of the strain field, the one-particle electronic spectrum and the oscillator strength of the fundamental optical transition in chemically disordered In$_{x}$Ga$_{1-x}$As pyramidal quantum dots (QDs). Interdiffusion across the interfaces of an originally ``pure'' InAs dot buried in a GaAs matrix is simulated through a simple model, leading to atomic configurations where the abrupt hetero-interfaces are replaced by a spatially inhomogeneous composition profile $x$. Structural relaxation and the strain field calculations are performed through the Keating valence force field (VFF) model, while the electronic and optical properties are determined within the empirical tight-binding (ETB) approach. We analyze the relative impact of two different aspects of the chemical disorder, namely: (i) the effect of the strain relief inside the QD, and (ii) the purely chemical effect due to the group-III atomic species interdiffusion. We find that these effects may be quantitatively comparable, significantly affecting the electronic and optical properties of the dot. Our results are discussed in comparison with recent luminescence studies of intermixed QDs.

cond-mat.mtrl-sci↗

arXiv2005

Role of semicore states in the electronic structure of group-III nitrides: An exact exchange study

The bandstructure of the zinc-blende phase of AlN, GaN, InN is calculated employing the exact-exchange (EXX) Kohn-Sham density-functional theory and a pseudopotential plane-wave approach. The cation semicore d electrons are treated both as valence and as core states. The EXX bandgaps of AlN and GaN (obtained with the Ga 3d electrons included as core states) are in excellent agreement with previous EXX results, GW calculations and experiment. Inclusion of the semicore d electrons as valence states leads to a large reduction in the EXX bandgaps of GaN and InN. Contrary to common belief, the removal of the self-interaction, by the EXX approach, does not account for the large disagreement for the position of the semicore d electrons between the LDA results and experiment.

cond-mat.mtrl-sci↗

arXiv2005

Jahn-Teller stabilization of a "polar" metal oxide surface: Fe3O4(001)

Using ab initio thermodynamics we compile a phase diagram for the surface of Fe3O4(001) as a function of temperature and oxygen pressures. A hitherto ignored polar termination with octahedral iron and oxygen forming a wave-like structure along the [110]-direction is identified as the lowest energy configuration over a broad range of oxygen gas-phase conditions. This novel geometry is confirmed in a x-ray diffraction analysis. The stabilization of the Fe3O4(001)-surface goes together with dramatic changes in the electronic and magnetic properties, e.g., a halfmetal-to-metal transition.

cond-mat.mtrl-sci↗

arXiv2003

Kinetic hindrance during the initial oxidation of Pd(100) at ambient pressures

The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions we either observe a thin sqrt(5) x sqrt(5) R27 surface oxide or the growth of a rough, poorly ordered bulk oxide film of PdO predominantly with (001) orientation. By either comparison to the surface phase diagram from first-principles atomistic thermodynamics or by explicit time-resolved measurements we identify a strong kinetic hindrance to the bulk oxide formation even at temperatures as high as 675 K.

cond-mat.mtrl-sci↗