arXiv Science⌕ Search

arXiv subjects

M. Persson

Publications and source records attributed to M. Persson.

17 recordsLinked to original sources
arXiv2022

Oscillatory Exchange Bias Controlled by RKKY in Magnetic Multilayers

Ferromagnetic/antiferromagnetic bilayers are interfaced with normal metal/ferromagnetic bilayers to form F*/AF/N/F valves. The N-spacer thickness is chosen such that it mediates strong indirect exchange (RKKY) between the outer magnetic layers, which varies in strength/direction depending on the N thickness and in direction on switching F. The system exhibits a strong modulation of the F*/AF exchange bias, oscillating in strength syncronously with the oscillation in the interlayer RKKY exchange across the normal metal spacer. The effect is explained as due to a superposition taking place within the antiferromagnetic layer of the direct-exchange proximity effect from the F*/AF interface and the indirect RKKY exchange from F penetrating AF via N. The modulation, expressed via the strength of the F*/AF bias field, reaches 400% at the first RKKY peak.

cond-mat.mes-hall↗
arXiv2022

Magnetocaloric effect in multilayers studied by membrane-based calorimetry

We study magnetic multilayers, incorporating dilute ferromagnetic spacers between strongly-ferromagnetic layers exhibiting a proximity-enhanced magnetocaloric effect. Using magnetometry and direct measurements of the adiabatic temperature change based on a nanomembrane-calorimetry, we find that the magnetocaloric effect in the studied multilayer is indeed enhanced compared to that in the bulk spacer material. We develop a phenomenological numerical model of the studied trilayer and find that a long-range exchange interaction through the weakly-ferromagnetic spacer is required to adequately describe the magnetic and magnetocaloric properties of the system.

cond-mat.mes-hall↗
arXiv2021

Inverse magnetocaloric effect in synthetic antiferromagnets

The magnetocaloric effect in exchange-coupled synthetic-antiferromagnet multilayers is investigated experimentally and theoretically. We observe a temperature-controlled inversion of the effect, where the entropy increases on switching the individual ferromagnetic layers from anti-parallel to parallel alignment near their Curie point. Using a microscopic analytical model as well as numerical atomistic-spin simulations of the system, we explain the observed effect as due to the interplay between the intra- and inter-layer exchange interactions, which either add up or counteract to effectively modulate the Curie temperature of the dilute ferromagnetic layers. The proposed method of designing tunable, strongly magneto-caloric materials should be of interest for such applications as heat-assisted spintronics and magnetic refrigeration.

cond-mat.mes-hall↗
arXiv2018

Effects of asymmetry in strongly coupled spin vortex pairs

Effects of magnetic asymmetry on strongly coupled spin-vortex pairs with parallel core polarization and antiparallel chirality in synthetic nanomagnets are investigated. This includes vortex-core length asymmetry, biasing field asymmetry, and pinning of one of the two vortex cores. Our experimental observations as well as analytical and micromagnetic modeling show how magnetic asymmetry can be used to differentiate magneto-resistively otherwise degenerate multiple stable states of a vortex pair. These results expand the knowledge base for spin vortex arrays in nanostructures and should be useful in light of the recent proposals on coding information into multiple topological spin states, such as single and multiple vortex core/chirality states.

cond-mat.mes-hall↗
arXiv2018

Transient dynamics of strongly coupled spin vortex pairs: effects of anharmonicity and resonant excitation on inertial switching

Spin vortices in magnetic nanopillars are used as GHz oscillators, with frequency however essentially fixed in fabrication. We demonstrate a model system of a two-vortex nanopillar, in which the resonance frequency can be changed by an order of magnitude, without using high dc magnetic fields. The effect is due to switching between the two stable states of the vortex pair, which we show can be done with low-amplitude fields of sub-ns duration. We detail the relevant vortex-core dynamics and explain how field anharmonicity and phase control can be used to enhance the performance.

cond-mat.mes-hall↗
arXiv2016

Water around IRAS15398-3359 observed with ALMA

How protostars accrete mass is one of the fundamental problems of star formation. High column densities and complex kinematical structures make direct observations challenging and they only provide a snapshot. Chemical tracers provide an interesting alternative to characterise the infall histories of protostars. Previous observations of H13CO+ towards the low-mass protostar IRAS15398-3359 showed a depression in the abundance. This is a sign of destruction of HCO+ by an enhanced presence of gaseous water in an extended region, possibly related to a recent burst in the accretion. Direct observations of water vapour can determine the exact extent of the emission and confirm the hypothesis that HCO+ is indeed a good tracer of the water snow-line. IRAS15398 was observed using ALMA at 0.5" resolution. Maps of HDO(101-000) and H218O(414-321) were taken simultaneously with observations of the CS(8-7) and N2H+(5-4) lines and continuum at 0.65 and 0.75 mm. The maps were interpreted using dust radiative transfer calculations of the protostellar infalling envelope with an outflow cavity. HDO is clearly detected and extended over the scales of the H13CO+ depression, although it is displaced by ~500 AU in the direction of the outflow. H218O is tentatively detected towards the red-shifted outflow lobe, but otherwise it is absent from the mapped region, which suggests that temperatures are low. Based on the temperature structure obtained from dust radiative transfer models, we conclude that the water was most likely released from the grains in an extended hour-glass configuration during a recent accretion burst. HDO is only detected in the region closest to the protostar, at distances of up to 500 AU. These signatures can only be explained if the luminosity has recently been increased by orders of magnitudes. Additionally, the densities in the outflow cones must be sufficiently low.

astro-ph.SR↗
arXiv2011

The ground state energy of the three dimensional Ginzburg-Landau functional. Part~II: Surface regime

We study the Ginzburg-Landau model of superconductivity in three dimensions and for strong external magnetic fields. For magnetic field strengths above the phenomenologically defined second critical field it is known from Physics that superconductivity should be essentially restricted to a region near the boundary. We prove that the expected region does indeed carry superconductivity. Furthermore, we give precise energy estimates valid also in the regime around the second critical field which display the transition from bulk superconductivity to surface superconductivity.

math-ph↗
arXiv2009

Strong diamagnetism for the ball in three dimensions

In this paper we give a detailed asymptotic formula for the lowest eigenvalue of the magnetic Neumann Schrödinger operator in the ball in three dimensions with constant magnetic field, as the strength of the magnetic field tends to infinity. This asymptotic formula is used to prove that the eigenvalue is monotonically increasing for large values of the magnetic field.

math-ph↗
arXiv2009

Electron-hole pair creation by atoms incident on a metal surface

Electron-hole pair creation by an adsorbate incident on a metal surface is described using \textit{ab initio} methods. The approach starts with standard first principles electronic structure theory, and proceeds to combine classical, quantum oscillator and time dependent density functional methods to provide a consistent description of the non-adiabatic energy transfer from adsorbate to substrate. Of particular interest is the conservation of the total energy at each level of approximation, and the importance of a spin transition as a function of the adsorbate/surface separation. Results are presented and discussed for H and D atoms incident on the Cu(111) surface.

cond-mat.mtrl-sci↗
arXiv2009

Energy loss of atoms at metal surfaces due to electron-hole pair excitations: First-principles theory of "chemicurrents"

A method is presented for calculating electron-hole pair excitation due to an incident atom or molecule interacting with a metal surface. Energy loss is described using an \textit{ab initio} approach that obtains a position-dependent friction coefficient for an adsorbate moving near a metal surface from a total energy pseudopotential calculation. A semi-classical forced oscillator model is constructed, using the same friction coefficient description of the energy loss, to describe excitation of the electron gas due to the incident molecule. This approach is applied to H and D atoms incident on a Cu(111) surface, and we obtain theoretical estimates of the `chemicurrents' measured by Nienhaus et al [Phys. Rev. Lett. \textbf{82}, 446 (1999)] for these atoms incident on the surface of a Schottky diode.

cond-mat.mtrl-sci↗
arXiv2008

Newns-Anderson model of chemicurrents in H/Cu and H/Ag

The excitation of the electronic system induced by the adsorption of a hydrogen atom on the (111) surfaces of copper and silver is investigated using the time-dependent, mean-field Newns-Anderson model. Parameters for the model are obtained by fitting to density functional theory calculations, allowing the charge and energy transfer between adsorbate and surface to be calculated, together with the spectrum of electronic excitations. These results are used to make direct comparisons with experimental measurements of chemicurrents, yielding good agreement for both the magnitude of the current and the ratio of the currents for H and D adsorption.

cond-mat.mtrl-sci↗
arXiv2007

Molecular dynamics simulation of nanocolloidal amorphous silica particles: Part I

Explicit molecular dynamics simulations were applied to a pair of amorphous silica nanoparticles in aqueous solution, of diameter 4.4 nm with four different background electrolyte concentrations, to extract the mean force acting between the pair of silica nanoparticles. Dependences of the interparticle forces with separation and the background electrolyte concentration were demonstrated. The nature of the interaction of the counter-ions with charged silica surface sites (deprotonated silanols) was investigated. A 'patchy' double layer of adsorbed sodium counter-ions. was observed. Dependences of the interparticle potential of mean force with separation and the background electrolyte concentration were demonstrated. Direct evidence of the solvation forces is presented in terms of changes of the water ordering at the surfaces of the isolated and double nanoparticles. The nature of the interaction of the counter-ions with charged silica surface sites (deprotonated silanols) was investigated in terms of quantifying the effects of the number of water molecules separately inside each of the pair of nanoparticles by defining an impermeability measure. A direct correlation was found between impermeability (related to the silica surface 'hairiness') and the disruption of water ordering. Differences in the impermeability between the two nanoparticles are attributed to differences in the calculated electric dipole moment.

physics.chem-ph↗
arXiv2007

Molecular dynamics simulation of nanocolloidal amorphous silica particles: Part II

Explicit molecular dynamics simulations were applied to a pair of amorphous silica nanoparticles of diameter 3.2 nm immersed in a background electrolyte. Mean forces acting between the pair of silica nanoparticles were extracted at four different background electrolyte concentrations. Dependence of the inter-particle potential of mean force on the separation and the silicon to sodium ratio, as well as on the background electrolyte concentration, are demonstrated. The pH was indirectly accounted for via the ratio of silicon to sodium used in the simulations. The nature of the interaction of the counter-ions with charged silica surface sites (deprotonated silanols) was also investigated. The effect of the sodium double layer on the water ordering was investigated for three Si:Na+ ratios. The number of water molecules trapped inside the nanoparticles was investigated as the Si:Na+ ratio was varied. Differences in this number between the two nanoparticles in the simulations are attributed to differences in the calculated electric dipole moment. The implications of the form of the potentials for aggregation are also discussed.

physics.chem-ph↗
arXiv2006

Spectrum of electronic excitations due to the adsorption of atoms on metal surfaces

The time-dependent, mean-field Newns-Anderson model for a spin-polarised adsorbate approaching a metallic surface is solved in the wide-band limit. Equations for the time-evolution of the electronic structure of the adsorbate-metal system are derived and the spectrum of electronic excitations is found. The behaviour of the model is demonstrated for a set of physically reasonable parameters.

cond-mat.mtrl-sci↗
arXiv2004

Scanning tunneling microscopy and spectroscopy of sodium-chloride overlayers on the stepped Cu(311) surface: Experimental and theoretical study

The physical properties of ultrathin NaCl overlayers on the stepped Cu(311) surface have been characterized using scanning tunneling microscopy (STM) and spectroscopy, and density functional calculations. Simulations of STM images and differential conductance spectrum were based on the Tersoff-Hamann approximation for tunneling with corrections for the modified tunneling barrier at larger voltages and calculated Kohn-Sham states. Characteristic features observed in the STM images can be directly related to calculated electronic and geometric properties of the overlayers. The measured apparent barrier heights for the mono-, bi-, and trilayers of NaCl and the corresponding adsorption-induced changes in the work function, as obtained from the distance dependence of the tunneling current, are well reproduced by and understood from the calculated results. The measurements revealed a large reduction of the tunneling conductance in a wide voltage region, resembling a band gap. However, the simulated spectrum showed that only the onset at positive sample voltages may be viewed as a valence band edge, whereas the onset at negative voltages is caused by the drastic effect of the electric field from the tip on the tunneling barrier.

cond-mat.mtrl-sci↗
arXiv2004

Theoretical study of electron states in Au chains on NiAl(110)

We have carried out a density functional study of unoccupied, resonance states in a single Au atom, dimers, a trimer and infinite Au chains on the NiAl(110) surface. Two inequivalent orientations of the ad-chains with substantially different interatomic distances were considered. From the study of the evolution of the electron states in an Au chain from being isolated to adsorbed, we find that the resonance states derive from the 6$s$ states of the Au atoms, which hybridize strongly with the substrate states and develop a $p$-like polarization. The calculated resonance states and LDOS images were analyzed in a simple tight-binding, resonance model. This model clarifies (1) the physics of direct and substrate-mediated adatom-adatom interactions and (2) the physics behind the enhancements of the LDOS at the ends of the adatom chains, and (3) the physical meaning of the "particle-in-box" model used in the analysis of observed resonance states. The calculated effective mass and band bottom energy are in good agreement with experimental data obtained from scanning tunnelling spectroscopy.

cond-mat.mtrl-sci↗