arXiv Science⌕ Search

arXiv subjects

M. Pedrini

Publications and source records attributed to M. Pedrini.

2 recordsLinked to original sources

High-power X-Point Target divertor experiments on the TCV tokamak

Stationary power exhaust in the X-Point Target (XPT) divertor configuration is investigated in high-power ($2.5\,\text{MW}$) TCV L-mode discharges, in which the Lengyel detachment scaling metric $P_{\text{SOL}}B_{0}/(R_{0}n_{e,\text{u}}^{2})$ lies in the range expected for reactors (SPARC, ITER, ARC). Compared with a conventional single-null (SN) divertor, the XPT improves power exhaust performance, reducing the peak outer target heat flux by 40--60\% and enabling divertor detachment with nitrogen seeding under conditions in which the SN cannot be detached. Detachment evolves asymmetrically across the multiple XPT outer strike points. The sensitivities of the peak target heat fluxes and impurity emission front positions to the X-point separation ($\text{d}R_{\text{u},X2}$) are characterized and found to decrease at higher nitrogen seeding levels. Field-reversal experiments reveal the critical role of $E\times B$ drifts inherent to the magnetic topology of the secondary X-point, which drive an unconventional redistribution of density and impurity radiation in the XPT divertor and thereby cause the asymmetries between the XPT outer strike points, largely confirming the expectations from recent SOLPS-ITER modelling. A framework for understanding the power exhaust physics of the XPT is presented, detailing the roles of SOL splitting, connection length peaking, $E\times B$ drifts, and vessel geometry. Together, these results establish an experimental physics basis for the XPT divertor as a potential power exhaust solution for tokamak reactors.

physics.plasm-ph↗

Infrared Thermography in the Tokamak à Configuration Variable

In the Tokamak à Configuration Variable (TCV), infrared thermography (IR) is currently composed of the horizontal, vertical, and tangential infrared systems (HIR, VIR, TIR), which all use Equus 81k M cameras. The IR diagnostics obtain the surface temperature of TCV's graphite tiles for post-discharge analysis. Target heat flux profiles are inferred from the tile temperature with the THEODOR (Thermal Energy Onto Divertor) code. Fast transient analysis is possible in reduced frame mode, with acquisition frequencies above 10kHz. The main views are the lower inner wall for HIR, the floor for VIR, and the lower outer wall for TIR. The HIR camera can also be moved to view the midplane inner wall, while TIR can be moved to see the midplane inner wall and the upper outer wall, mainly to measure synchrotron radiation and heat deposition due to runaway electrons. Recent developments in TCV's IR systems include (i) tile diffusivity and conductivity measurements to assure the precision of heat flux estimates; (ii) the addition of one new VIR heated valley tile and two rooftop TIR tiles, for measurements of fast heat flux transients; (iii) the implementation of long-pass wavelength filter of 4095 nm, to diminish the measurement of plasma parasitic infrared light, mainly from deuterium 5-4 emission at 4051 nm. Despite these developments, the main sources of uncertainty for IR in TCV are still parasitic infrared light and the determination of the surface layer heat transmission factor, both of which mainly affect the VIR system.

physics.plasm-ph↗