arXiv subjects

M. Mwaniki

Publications and source records attributed to M. Mwaniki.

5 recordsLinked to original sources

arXiv2026

Ionization Profile Monitors for the IOTA Storage Ring at Fermilab

Ionization profile monitors (IPM) are used in many accelerator laboratories around the world for non-destructive profile measurements of high-energy particle beams. They have been used in nearly all the synchrotrons built at Fermilab and are presently used in the Main Injector (MI), Recycler (RR), and Booster. This paper will present the current status of the design of a new pair of IPMs to be installed in the Integrable Optics Test Accelerator (IOTA), an experimental proton storage ring with a beam energy of 2.5 MeV. The design incorporates aspects of several IPMs previously or currently used at FNAL. Similar to the Booster IPM, ions are collected rather than electrons, thus requiring no external magnetic field. To increase the signal, each IPM uses two microchannel plates in the chevron configuration as is done in the MI/RR IPMs, and due to the ring's ultrahigh vacuum conditions, the local vacuum pressure is increased with a calibrated leak, akin to the former Tevatron IPMs, to increase the ionization yield per bunch. Data acquisition includes upgraded preamplifiers and leveraging of the digitizer design of the beam position monitor system already in use at IOTA. In addition to the mechanical and electronic designs, simulation results of the effects of the electric fields and injected gas on the circulating beam will also be presented.

physics.acc-ph↗

arXiv2023

Progress on an Electron Beam Profile Monitor at the Fermilab Main Injector

The current program at Fermilab involves the construction of a new superconducting linear accelerator (LINAC) to replace the existing warm version. The new LINAC, together with other planned improvements, is in support of proton beam intensities in the Main Injector (MI) that will exceed 2 MW. Measuring the transverse profiles of these high intensity beams in a ring requires non-invasive techniques. The MI uses ionization profile monitors as its only profile system. An alternative technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. This type of device was installed in MI and initial studies of it have been previously presented. This paper will present the status and recent studies of the device utilizing different techniques.

physics.acc-ph↗

arXiv2023

Time-drift Aware RF Optimization with Machine Learning Techniques

The Fermilab Linac delivers 400 MeV H- beam to the rest of the accelerator chain. Providing stable intensity, energy, and emittance is key since it directly affects downstream machines. To operate high current beam, accelerators must minimize uncontrolled particle loss; this can be accomplished by minimizing beam longitudinal emittance via RF parameter optimization. However, RF tuning is required daily since the resonance frequency of the accelerating cavities is affected by ambient temperature and humidity variations and thus drifts with time. In addition, the energy and phase space distribution of particles emerging from the ion source are subject to fluctuations. Such drift is not unique to Fermilab, but rather affects most laboratories. We are exploring machine learning (ML) algorithms for automated RF tuning for 2 objectives: optimization of Linac output energy and phase oscillation correction, with an emphasis on time-drift aware modeling that can account for conditions changing over time.

physics.acc-ph↗

arXiv2022

Operation of the H- Linac at FNAL

The Fermi National Accelerator Laboratory (FNAL) Linac has been in operation for 52 years. In approximately four years, it will be replaced by a new 800 MeV superconducting machine, the PIP-II SRF Linac. In the current configuration, the Linac delivers H- ions at 400 MeV and injects protons by charge exchange into the Booster synchrotron. Despite its age, the Linac is the most stable accelerator in the FNAL complex, reliably sending 22 mA in daily operations. We will discuss the status of the operation, beam studies, and plans.

physics.acc-ph↗

arXiv2022

Diagnostics for Linac Optimization With Machine Learning

The Fermilab Linac delivers 400 MeV H- beam to the rest of the accelerator chain. Providing stable intensity, energy, and emittance is key since it directly affects downstream machines. To counter fluctuations of Linac output due to various effects to be described below we are working on implementing dynamic longitudinal parameter optimization based on Machine Learning (ML). As inputs for the ML model, signals from beam diagnostics have to be well understood and reliable. In this paper we discuss the status and plans for ML-based optimization as well as preliminary results of diagnostics studies.

physics.acc-ph↗