arXiv subjects

M. King

Publications and source records attributed to M. King.

13 recordsLinked to original sources

arXiv2026

Production and installation of wavelength-shifting reflective light enhancers for the Short-Baseline Near Detector

We report on the design, production, and installation of a wavelength-shifting reflective system on the cathode of the Short-Baseline Near Detector (SBND), a liquid argon time projection chamber located along the Fermilab Booster Neutrino Beam. To increase and homogenize scintillation-light collection, 64 double-sided plates were fabricated from FR4, laminated with specular reflector film and coated with 300 $\mu$g/cm$^2$ of tetraphenyl butadiene (TPB) wavelength shifter using controlled physical vapor deposition. The coating uniformity was validated through dedicated measurements of deposited mass and profilometry studies. Because exposure to ambient blue/UV light could degrade the TPB, protective filtering and controlled storage conditions were implemented during handling and installation. The coated plates were assembled between conductive meshes for high-voltage compatibility and installed in situ during detector integration. This system constitutes the largest TPB-coated area deployed in a neutrino detector. It operates in conjunction with SBND's photon detection system, which consists of photomultiplier tubes and X-ARAPUCAs. Early light-collection measurements show high uniformity and light response across the detector, supporting improved triggering, calorimetry, and position reconstruction in SBND.

physics.ins-det↗

arXiv2026

Closing the Loop: Deploying Auto-Generating Digital Twins for Particle Accelerators

The simulation of a physical system in a virtual replica, known as a digital twin, is a useful way to interrogate the system non-invasively, providing the ability to perform predictive maintenance and surveillance, and to investigate potential novel configurations without perturbing the system. This article presents the implementation of an auto-generating digital twin architecture for particle accelerators: a virtual control system is generated to mirror the physical accelerator hardware, and used to update a simulation model which then feeds back the results into virtual diagnostics. All of the information about the accelerator lattice is cascaded down from a ground source of truth, removing any ambiguity about the naming of parameters between the simulation model and the virtual hardware. This design is modular and extensible, allowing researchers from different institutions to use their own models (for example, a machine learning model) and accelerator lattices while maintaining the overall structural coherence of the digital twin. This architecture has been tested for three accelerator facilities \textendash~CLARA, the ISIS injector, and the proposed UK XFEL \textendash~and aims to provide the foundation for a collaborative community effort in the development of shared technology towards a generic digital twin solution.

physics.acc-ph↗

arXiv2026

A flexible start-to-end simulation framework for particle accelerators based on a comprehensive lattice description

Standardization of data formats in a scientific discipline brings a range of benefits to researchers, as it enables the sharing of workflows and solutions to common problems, provides the foundation for generically useful tools that can be applied across the field, and gives a basis for cross-checking and validation that can be understood by all. Owing to the wide range of possible modes of description of particle accelerator lattices, a standard solution to this problem has not yet been developed for the field, although efforts are underway across the community. This article presents a schema for a comprehensive and generic format for describing particle accelerator lattices, encompassing physical element information, simulation code-specific parameters, control system variables, electrical and magnetic data, and other parameters, for each element. A translation layer is also provided in order to export this lattice into formats suitable for a variety of standard accelerator simulation codes. Based on this format, a framework has been developed for generating, tracking and analyzing beams through the lattice, providing a seamless transfer between simulation codes and the basis for a fully generic start-to-end simulation framework.

physics.acc-ph↗

arXiv2025

Controls Abstraction Towards Accelerator Physics: A Middle Layer Python Package for Particle Accelerator Control

Control system middle layers act as a co-ordination and communication bridge between end users, including operators, system experts, scientists, and experimental users, and the low-level control system interface. This article describes a Python package -- Controls Abstraction Towards Acclerator Physics (CATAP) -- which aims to build on previous experience and provide a modern Python-based middle layer with explicit abstraction, YAML-based configuration, and procedural code generation. CATAP provides a structured and coherent interface to a control system, allowing researchers and operators to centralize higher-level control logic and device information. This greatly reduces the amount of code that a user must write to perform a task, and codifies system knowledge that is usually anecdotal. The CATAP design has been deployed at two accelerator facilities, and has been developed to produce a procedurally generated facility-specific middle layer package from configuration files to enable its wider dissemination across other machines.

physics.acc-ph↗

arXiv2025

Sampling Off-Axis Neutrino Fluxes with the Short-Baseline Near Detector

The Short-Baseline Near Detector (SBND), the near detector in the Short-Baseline Neutrino Program at Fermi National Accelerator Laboratory, is located just 110 m from the Booster Neutrino Beam target. Thanks to this close proximity, relative to its 4 m $\times$ 4 m front face, neutrinos enter SBND over a range of angles from $0^{\circ}$ to approximately $1.6^{\circ}$, enabling the detector to sample variations in the neutrino flux as a function of angle-a technique known as PRISM, referred to here as SBND-PRISM. In this paper, we show how muon- and electron-neutrino fluxes vary as a function of the neutrino beam axis angle and how this can be exploited to expand the physics potential of SBND. We make use of a model that predicts an angle-dependent electron-neutrino excess signal to illustrate this effect, such as $\nu_\mu \to \nu_e$ oscillations. We present how SBND-PRISM provides a method to add robustness against uncertainties in cross-section modeling and, more generally, uncertainties that do not depend on the spatial position of neutrino interaction inside the detector. The fluxes, along with their associated covariance matrices, are made publicly available with this publication.

hep-ex↗

arXiv2025

Characterization and automated optimization of laser-driven proton beams from converging liquid sheet jet targets

Compact, stable, and versatile laser-driven ion sources hold great promise for applications ranging from medicine to materials science and fundamental physics. While single-shot sources have demonstrated favorable beam properties, including the peak fluxes necessary for several applications, high repetition rate operation will be necessary to generate and sustain the high average flux needed for many of the most exciting applications of laser-driven ion sources. Further, to navigate through the high-dimensional space of laser and target parameters towards experimental optima, it is essential to develop ion acceleration platforms compatible with machine learning learning techniques and capable of autonomous real-time optimization. Here we present a multi-Hz ion acceleration platform employing a liquid sheet jet target. We characterize the laser-plasma interaction and the laser-driven proton beam across a variety of key parameters governing the interaction using an extensive suite of online diagnostics. We also demonstrate real-time, closed-loop optimization of the ion beam maximum energy by tuning the laser wavefront using a Bayesian optimization scheme. This approach increased the maximum proton energy by 11% compared to a manually-optimized wavefront by enhancing the energy concentration within the laser focal spot, demonstrating the potential for closed-loop optimization schemes to tune future ion accelerators for robust high repetition rate operation.

physics.plasm-ph↗

arXiv2025

The Short-Baseline Near Detector at Fermilab

SBND is a 112 ton liquid argon time projection chamber (LArTPC) neutrino detector located 110 meters from the Booster Neutrino Beam (BNB) target at Fermilab. Its main goals include searches for eV-scale sterile neutrinos as part of the Short-Baseline Neutrino (SBN) program, other searches for physics beyond the Standard Model, and precision studies of neutrino-argon interactions. In addition, SBND is providing a platform for LArTPC neutrino detector technology development and is an excellent training ground for the international group of scientists and engineers working towards the upcoming flagship Deep Underground Neutrino Experiment (DUNE). SBND began operation in July 2024, and started collecting stable neutrino beam data in December 2024 with an unprecedented rate of ~7,000 neutrino events per day. During its currently approved operation plans (2024-2027), SBND is expected to accumulate nearly 10 million neutrino interactions. The near detector dataset will be instrumental in testing the sterile neutrino hypothesis with unprecedented sensitivity in SBN and in probing signals of beyond the Standard Model physics. It will also be used to significantly advance our understanding of the physics of neutrino-argon interactions ahead of DUNE. After the planned accelerator restart at Fermilab (2029+), opportunities are being explored to operate SBND in antineutrino mode in order to address the scarcity of antineutrino-argon scattering data, or in a dedicated beam-dump mode to significantly enhance sensitivity to searches for new physics. SBND is an international effort, with approximately 40% of institutions from Europe, contributing to detector construction, commissioning, software development, and data analysis. Continued European involvement and leadership are essential during SBND's operations and analysis phase for both the success of SBND, SBN and its role leading up to DUNE.

hep-ex↗

arXiv2024

First Observation of Antiproton Annihilation At Rest on Argon in the LArIAT Experiment

We report the first observation and measurement of antiproton annihilation at rest on argon using the LArIAT experiment. Antiprotons from a charged particle test beam that come to rest inside LArIAT's liquid argon time projection chamber (LArTPC) are identified through beamline instrumentation and LArTPC track reconstruction algorithms. The multiplicity of charged particle tracks originating from the annihilation vertex is manually assessed through hand-scanning, resulting in a distribution with a mean of 3.2 $\pm$ 0.4 tracks and a standard deviation of 1.3 tracks. This is consistent with an automated track reconstruction, which produces a mean of 2.8 $\pm$ 0.4 tracks and a standard deviation of 1.2 tracks. Good agreement is found between data and Monte Carlo simulations for both methods. Additionally, we report the shower multiplicity and particle identification of outgoing tracks, both of which align closely with theoretical predictions. These findings will contribute to modeling of intranuclear annihilation interactions on argon, including scenarios such as neutron-antineutron oscillations.

hep-ex↗

arXiv2024

Measurements of Pion and Muon Nuclear Capture at Rest on Argon in the LArIAT Experiment

We report the measurement of the final-state products of negative pion and muon nuclear capture at rest on argon by the LArIAT experiment at the Fermilab Test Beam Facility. We measure a population of isolated MeV-scale energy depositions, or blips, in 296 LArIAT events containing tracks from stopping low-momentum pions and muons. The average numbers of visible blips are measured to be 0.74 $\pm$ 0.19 and 1.86 $\pm$ 0.17 near muon and pion track endpoints, respectively. The 3.6$\sigma$ statistically significant difference in blip content between muons and pions provides the first demonstration of a new method of pion-muon discrimination in neutrino liquid argon time projection chamber experiments. LArIAT Monte Carlo simulations predict substantially higher average blip counts for negative muon (1.22 $\pm$ 0.08) and pion (2.34 $\pm$ 0.09) nuclear captures. We attribute this difference to Geant4's inaccurate simulation of the nuclear capture process.

hep-ex↗

arXiv2024

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds.

physics.ins-det↗

arXiv2023

Laser harmonic generation with tuneable orbital angular momentum using a structured plasma target

In previous studies of spin-to-orbital angular momentum (AM) conversion in laser high harmonic generation (HHG) using a plasma target, one unit of spin AM is always converted into precisely one unit of OAM [1, 2]. Here we show, through analytic theory and numerical simulations, that we can exchange one unit of SAM for a tuneable amount of OAM per harmonic step, via the use of a structured plasma target. In the process, we introduce a novel framework to study laser harmonic generation via recasting it as a beat wave process. This framework enables us to easily calculate and visualise harmonic progressions, unify the "photon counting" and "symmetry-based" approaches to HHG and provide new explanations for existing HHG results. Our framework also includes a specific way to analyse simultaneously the frequency, spin and OAM content of the harmonic radiation which provides enhanced insight into this process. The prospects of using our new framework to design HHG configurations with tuneable high-order transverse modes, also covering the design of structured plasma targets, will be discussed.

physics.plasm-ph↗

arXiv2023

Automated control and optimisation of laser driven ion acceleration

The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimisation of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimisation. Here, an automated, HRR-compatible system produced high fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimisation of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually-optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimisation of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.

physics.plasm-ph↗

arXiv2020

Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic

Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress.

physics.med-ph↗