arXiv2025
We discuss the requirements, concepts, simulations, implementation, and calibration of two dual Fabry-Perot based imaging spectropolarimeters, CRISP and CHROMIS, at the Swedish 1-meter Solar Telescope, and CRISP2 that is under construction. These instruments use a combination of a high-resolution and a low-resolution etalon together with an order-sorting prefilter to define the bandpass. The overall design is made robust and stable by tailoring the low-resolution etalon reflectivity to accommodate expected cavity errors from both etalons, and by using a compact optical design that eliminates the need for folding mirrors. By using a telecentric design based on lenses rather than mirrors, image degradation by the FPI system is negligible, as shown in a previous publication, and the throughput of the system is maximised. Initial alignment, and maintaining that alignment over time, is greatly simplified. The telecentric design allows full calibration and/or modelling of essential system parameters to be carried out without interfering with the optical setup. We also discuss briefly the polarimeters developed for CRISP and CHROMIS. The high performance of CRISP and CHROMIS has been demonstrated in an earlier publication through measurements of the granulation contrast and comparisons with similar measurements simultaneously made through broadband continuum filters. Here, we focus on the aspects of the design that are central to enabling high performance and robustness, but also discuss the calibration and processing of the data, and use a few examples of processed data to demonstrate the achievable image and data quality. We put forward a proposal for a similar conceptual design for the European Solar Telescope and conclude by discussing potential problems of the proposed approach to designs of this type. Some aspects of these FPI systems may be of interest also outside the solar community.