arXiv subjects

M. Brun

Publications and source records attributed to M. Brun.

12 recordsLinked to original sources

arXiv2023

Tunable topologically protected waveguiding in auxetic nonlinear metamaterials

In this paper, we discuss the possibility of achieving tunable topologically protected edge modes through the application of uniaxial deformation in an auxetic metamaterial. The proposed structure consists of a thin slab with oriented cuts in a hexagonal lattice, where topologically protected band gaps are opened by introducing a controlled variation in the cut lengths. Numerical simulations demonstrate the existence of topologically protected and scatter-free wave propagation in the structure at the interface between two sub-domains with modified cells, in distinct frequency ranges. This only occurs in the presence of auxeticity. In addition, exploiting geometrical nonlinearity, the application of a uniaxial strain can be used to close the topological band gaps or to modify their frequency range, i.e., to weaken the localization effects or to shift the frequency at which they occur. The spatial and temporal variation of the applied strain field can thus be used for the dynamic tuning of metamaterial topological waveguiding properties, with applications in mechanical devices for logic operations and computations.

physics.app-ph↗

arXiv2018

Platonic crystal with low-frequency locally resonant snail structures. Wave trapping, transmission amplification and shielding

We propose a new type of platonic crystal. The proposed microstructured plate includes snail resonators with low-frequency resonant vibrations. The particular dynamic effect of the resonators are highlighted by a comparative analysis of dispersion properties of homo- geneous and perforated plates. Analytical and numerical estimates of classes of standing waves are given and the analysis on a macrocell shows the possibility to obtain localization, wave trapping and edge waves. Applications include transmission amplification within two plates separated by a small ligament. Finally we proposed a design procedure to suppress low frequency flexural vibration in an elongated plate implementing a by-pass system re- routing waves within the mechanical system.

physics.class-ph↗

arXiv2015

Singular perturbations and cloaking illusions for elastic waves in membranes and Kirchhoff plates

A perturbation approach is used for analysis of a near-cloak in shielding a finite scatterer from an incident flexural wave. The effect of the boundary conditions on the interior surface of the cloaking layer is analysed in detail, based on the explicit analytical solutions of a wave propagation problem for a membrane as well as a Kirchhoff flexural plate. It is shown that the Dirichlet boundary condition on the interior contour of the cloak significantly reduces the cloaking action in the membrane case, and it also makes cloaking impossible for flexural waves in a Kirchhoff plate.

physics.class-ph↗

arXiv2014

Trapped Modes and Steered Dirac Cones in Platonic Crystals

This paper discusses the properties of flexural waves obeying the biharmonic equation, propagating in a thin plate pinned at doubly-periodic sets of points. The emphases are on the properties of dispersion surfaces having the Dirac cone topology, and on the related topic of trapped modes in plates with a finite set (cluster) of pinned points. The Dirac cone topologies we exhibit have at least two cones touching at a point in the reciprocal lattice, augmented by another band passing through the point. We show that the Dirac cones can be steered along symmetry lines in the Brillouin zone by varying the aspect ratio of rectangular lattices of pins, and that, as the cones are moved, the involved band surfaces tilt. We link Dirac points with a parabolic profile in their neighbourhood, and the characteristic of this parabolic profile decides the direction of propagation of the trapped mode in finite clusters.

math-ph↗

arXiv2014

Auxetic two-dimensional lattice with Poisson's Ratio arbitrarily close to -1

In this paper we propose a new lattice structure having macroscopic Poisson's ratio arbitrarily close to the stability limit -1. We tested experimentally the effective Poisson's ratio of the micro-structured medium; the uniaxial test has been performed on a thermoplastic lattice produced with a 3d printing technology. A theoretical analysis of the effective properties has been performed and the expression of the macroscopic constitutive properties is given in full analytical form as a function of the constitutive properties of the elements of the lattice and on the geometry of the microstructure. The analysis has been performed on three micro-geometry leading to an isotropic behaviour for the cases of three-fold and six-fold symmetry and to a cubic behaviour for the case of four-fold symmetry.

physics.class-ph↗

arXiv2014

Transformation cloaking and radial approximations for flexural waves in elastic plates

It is known that design of elastic cloaks is much more challenging than the design idea for acoustic cloaks, cloaks of electromagnetic waves or scalar problems of anti-plane shear. In this paper, we address fully the fourth-order problem and develop a model of a broadband invisibility cloak for channelling flexural waves in thin plates around finite inclusions. We also discuss an option to employ efficiently an elastic pre-stress and body forces to achieve such a result. An asymptotic derivation provides a rigorous link between the model in question and elastic wave propagation in thin solids. This is discussed in detail to show connection with non-symmetric formulations in vector elasticity studied in earlier work.

physics.class-ph↗

arXiv2014

Transformation elastodynamics and cloaking for flexural waves

The paper addresses an important issue of cloaking transformations for fourth-order partial differential equations representing flexural waves in thin elastic plates. It is shown that, in contrast with the Helmholtz equation, the general form of the partial differential equation is not invariant with respect to the cloaking transformation. The significant result of this paper is the analysis of the transformed equation and its interpretation in the framework of the linear theory of pre-stressed plates. The paper provides a formal framework for transformation elastodynamics as applied to elastic plates. Furthermore, an algorithm is proposed for designing a square cloak for flexural waves, which employs a regularised push-out transformation. Illustrative numerical examples show high accuracy and efficiency of the proposed cloaking algorithm. In particular, a physical configuration involving a perturbation of an interference pattern generated by two coherent sources is presented. It is demonstrated that the perturbation produced by a cloaked defect is negligibly small even for such a delicate interference pattern.

physics.class-ph↗

arXiv2011

Periodically fighting shake, rattle and roll

How easy is it to suppress shake, rattle and roll in a long bridge or a skyscraper? Most practical structures are designed so that long wave resonance vibrations can be avoided. However, there are recent examples, such as the Millennium Bridge in London or the Volga Bridge in Volgograd, which show that unexpected external forces may result in large scale unwanted shake and rattle. Full scale alteration of a bridge (or a skyscraper) would not be considered as an acceptable option, unless the structure has collapsed. Can we fix this by examining a representative part of the structure only and making small lightweight changes? We will do it here and illustrate an idea linking the engineering analysis to elastic waveguides.

math.DS↗

arXiv2007

Surface Plasmon mediated near-field imaging and optical addressing in nanoscience

We present an overview of recent progress in plasmonics. We focus our study on the observation and excitation of surface plasmon polaritons (SPPs) with optical near-field microscopy. We discuss in particular recent applications of photon scanning tunnelling microscope (PSTM) for imaging of SPP propagating in metal and dielectric wave guides. We show how near-field scanning optical microscopy (NSOM) can be used to optically and actively address remotely nano-objects such as quantum dots. Additionally we compare results obtained with near-field microscopy to those obtained with other optical far-field methods of analysis such as leakage radiation microscopy (LRM).

physics.optics↗

arXiv2007

Anomalous Resistance Ridges Along Filling Factor $ν= 4i$

We report anomalous structure in the magnetoresistance of SiO$_2$/Si(100)/SiO$_2$ quantum wells. When Landau levels of opposite valleys are driven through coincidence at the Fermi level, the longitudinal resistance displays elevations at filling factors that are integer multiples of 4 $(ν=4i)$ accompanied by suppression on either side of $ν=4i$. This persists when either magnetic field or valley splitting is swept leading to resistance ridges running along $ν=4i$. The range of field over which they are observed points to the role of spin degeneracy, which is directly confirmed by their disappearance under in-plane magnetic field. The data suggest a new type of many-body effect due to the combined degeneracy of valley and spin.

cond-mat.mes-hall↗

arXiv2006

Remote optical addressing of single nano-objects

We present a scheme for remotely addressing single nano-objects by means of near-field optical microscopy that makes only use of one of the most fundamental properties of electromagnetic radiation: its polarization. A medium containing optically active nano-objects is covered with a thin metallic film presenting sub-wavelength holes. When the optical tip is positioned some distance away from a hole, surface plasmons in the metal coating are generated which, by turning the polarization plane of the excitation light, transfer the excitation towards a chosen hole and induce emission from the underlying nano-objects. The method, easily applicable to other systems, is demonstrated for single quantum dots (QDs) at low temperature. It may become a valuable tool for future optical applications in the nanoworld.

physics.optics↗

arXiv2004

On the Multiplicative Structure of Topological Hochschild Homology

We show that the topological Hochschild homology THH(R of an E_n-ring spectrum R is an E_{n-1}-ring spectrum. The proof is based on the fact that the tensor product of the operad Ass for monoid structures and the the little n-cubes operad is an E_{n+1}-operad, a result which is of independent interest.

math.AT↗