arXiv subjects

M. Bernert

Publications and source records attributed to M. Bernert.

4 recordsLinked to original sources

arXiv2026

Evolution of SPI-induced disruptions in ASDEX Upgrade

Disruptions are a major concern for future fusion reactors based on the tokamak principle. To ensure machine protection, the thermal loads and vessel forces that arise during disruptions have to be mitigated reliably. For the ITER disruption mitigation system (DMS), the shattered pellet injection (SPI) technology has been selected. It can provide a prompt delivery of the injection material into the plasma core, with the mitigation efficiency depending on fragment size and velocity. A highly flexible SPI system was built and installed at the tokamak ASDEX Upgrade (AUG) to aid the finalization process of the ITER DMS and provide crucial input for modeling. The SPI-induced disruptions in the 2022 AUG experiments follow a typical chain of events, which are discussed in this paper: The first light, main fragment arrival, plasma movement event, MARFE, thermal quench/plasma current spike, current quench, and vertical displacement event phase. Depending on the injection parameters, these phases may vary significantly or some might not be present at all. In this paper, we will focus on the characterization of these disruption phases and figures of merit for the mitigation efficiency, depending on the SPI configuration. With increasing amount of assimilated neon in the plasma - primarily influenced by the neon content in the pellet but also the shattering parameters - the disruptions exhibit different behaviors. This disruption evolution seems to be a continuous process, with the most prominent feature being the changing disruption time scales and plasma current time trace shape during the CQ from convex (poorly or unmitigated) $\rightarrow$ concave (well mitigated/radiation dominated). Depending on the injection, pre-TQ durations between 15 - 0.5 ms and early CQ durations ($\Delta \textrm{t}_\textrm{CQ}^{100 \rightarrow 80}$) between 13.3 - 8.2 ms had been achieved at AUG.

physics.plasm-ph↗

arXiv2025

Simulating X-point radiator turbulence

Coupling a high-performance burning plasma core to a detached boundary solution is critical for realizing magnetic confinement fusion power. Predictive simulations of the edge and scrape-off layer are therefore essential and must self-consistently account for turbulence and the interplay between the plasma, neutral gas, and impurities. We present results on controlled full detachment in ASDEX Upgrade with an X-point radiator (XPR), obtained with the edge turbulence code GRILLIX. Assuming a fixed nitrogen concentration (in terms of the electron density) in coronal equilibrium, two simulations are discussed: they exhibit dense nitrogen radiation fronts, located 5 and 12 cm above the X-point, accounting for 80 % of the input heating power. In validations against density, temperature, and bolometry measurements, the simulations show good agreement and reproduce the detached divertor conditions observed in the experiment. Neutral gas is critical for achieving detachment and modulating the height of the XPR front, in agreement with previous SOLPS-ITER transport modeling and analytical power balance studies. In addition, the front structure is highly dynamic due to turbulence, consisting of ionizing and radiative mantles surrounding intermittent cold spots of recombining plasma. Near the detachment front, density and temperature fluctuation amplitudes exceed the background by more than 400 %, compared to 40 % in an attached reference case. The radial electric field shifts inward, poloidal symmetry of the electrostatic potential is broken (inducing strong radial flows around the XPR), and radial particle and heat transport into the low-field side scrape-off layer increases. These effects may explain the ELM suppression observed in the H-mode XPR regime.

physics.plasm-ph↗

arXiv2023

SOLPS-ITER simulation of an X-point radiator in TCV

SOLPS-ITER simulation is performed to reproduce the X-point radiator recently observed in nitrogen-seeded TCV experiments, which is a scenario that may be favorable to solve the power exhaust problems in future fusion devices. The simulations reveal the transition from the detached regime without XPR to the XPR regime, when increasing the nitrogen seeding rate. A cold X-point core surrounded by ionizing and radiative mentals is formed inside the separatrix and slightly above the X-point, where more than 90% of the total input power is dissipated. The cold X-point core exhibits a temperature of approximately 1eV and features high recombination rate to host the convective fluxes from the ionizing mental. Increasing nitrogen seeding rate also moves the nitrogen ionization front away from the target faster than the nitrogen stagnation point, which enhances the divertor nitrogen leakage to the main chamber and benefits the XPR region cooling. Carbon radiation decreases as the nitrogen seeding increases, and carbon radiation contributes to above 5% of the core impurity radiation before entering the XPR, which decreases to 2.8% when reaching the XPR. Both baffled and unbaffled divertor geometries are simulated and compared, showing that baffles facilitate the access to XPR by increasing the X-point neutral density, but requires higher seeding rate to enter the XPR regime.

physics.plasm-ph↗

arXiv2020

On the role of filaments in perpendicular heat transport at the Scrape-off Layer

In this work we carry out quantitative measurements of particle and heat transport associated to SOL filaments in a tokamak, and relate density shoulder formation to the advection of energy in the far SOL. For the first time, this attempt includes direct measurements of ion and electron temperatures for background and filaments. With this aim, we combine data from a number of equivalent L-mode discharges from the ASDEX Upgrade tokamak in which different probe heads were installed on the midplane manipulator. This approach is validated by a comparison with independent diagnostics. Results indicate an increase of heat transport associated to filaments after the shoulder formation. Several centimeters into the SOL, filaments are still found to carry a substantial fraction (up to one fifth) of the power ejected at the separatrix.

physics.plasm-ph↗