arXiv Science⌕ Search

arXiv subjects

Lyutianyang Zhang

Publications and source records attributed to Lyutianyang Zhang.

At least 19 recordsLinked to original sources

Ray-Tracing-Based Dynamic Channel Sounding With Autoregressive Wi-Fi CSI Prediction

Channel sounding in Wi-Fi multiple-input multiple-output (MIMO) systems must balance channel state information (CSI) accuracy against CSI acquisition overhead. Device mobility causes channel aging, while autoregressive CSI prediction introduces errors that accumulate over sounding intervals. However, standardized statistical channel models cannot fully capture the environment-specific channel dynamics encountered in physical artificial intelligence (AI) applications, motivating the use of Sionna-based ray tracing to evaluate CSI prediction under device mobility and evolving propagation geometry. This paper develops a dynamic sounding framework that integrates autoregressive CSI prediction with signal-to-interference-plus-noise ratio (SINR)-constrained interval selection. A Transformer with rotary position embedding that converts device positions into CSI sequences predicts CSI across multiple subcarriers for beamforming updates between sounding exchanges. We formulate sounding-interval selection as a predicted average-throughput maximization problem under per-stream SINR lower-bound constraints, including CSI acquisition and processing overhead. A prediction-error perturbation analysis provides the SINR bounds, and cumulative-sum enumeration globally solves the finite single-variable problem. Actual SINR feasibility holds whenever the prediction errors satisfy the bounds. Ray-tracing experiments assess channel prediction, trajectory transfer, and autoregressive prediction errors. In single-STA Wi-Fi 7 link-level simulations, predicted-CSI beamforming improves mean goodput by 67.3%, 112.7%, and 119.1% over stale CSI for linear, circular, and cosine trajectories, respectively.

cs.IT↗

LLM-Guided Dual-Stage Latency Optimization for Closed-Loop 6G V2I Digital Twins

Wireless Digital Twins are emerging as a key enabler for predictive network control in 6G Vehicle-to-Infrastructure (V2I) systems. However, closed-loop V2I DTs face two dual-stage communication bottlenecks arising from model parameter exchange for V2I DT reconstruction and multi-service V2I traffic delivery after each reconstruction. This paper proposes a closed-loop dual-stage End-to-End (E2E) latency optimization framework that integrates Compressed Personalized Federated Learning with a unified Large-Language-Model-guided Multi-Agent Reinforcement Learning approach. A CPFL-enabled decision-oriented V2I DT is first constructed by jointly predicting Path Loss (PL) and Quality-of-Experience (QoE)-oriented Key Performance Indicators (KPIs). Then the framework comprises two temporally coupled but latency-wise distinct optimization stages: Stage I minimizes the joint Uplink (UL) and Downlink (DL) E2E transmission latency of compressed shared backbone's parameters, and Stage II minimizes the service-aware E2E latency of multi-service V2I traffic. As the two stages share aligned agent roles and action space, we develop a unified Semantic-Aware Guidance-Enhanced Multi-Agent Proximal Policy Optimization framework, in which the LLM acts as a training-time semantic planner that provides high-level traffic splitting and power allocation guidance to reduce inefficient exploration, while the MARL agents execute feasible low-level actions. Simulation results demonstrate that the proposed framework enables efficient V2I DT reconstruction and significantly reduces both E2E latency for DT reconstruction and multi-service V2I traffic. The proposed SAGE-MAPPO supports cross-stage policy reuse by sequentially solving the two stages within each DT update cycle, which accelerates convergence relative to the existing baselines and facilitates timely DT updates in dynamic V2I scenarios.

cs.NI↗

Logit-Aware MIMO AirComp for Distributed Mixture-of-Experts LLM Inference over Wireless Edge Networks

Distributed mixture-of-experts (MoE) inference is a promising architecture for deploying large language models (LLMs) at wireless edge networks because sparse experts can be placed across coordinated base stations (BSs), while the anchor node and user equipment (UE) can offload LLM inference tasks to BSs. The communication bottleneck is the MoE aggregation, where the anchor BS must recover a weighted sum of selected expert outputs before each decoding step. Over-the-air computation (AirComp) is well matched to this operation because the wireless multiple-access channel naturally superposes simultaneous transmissions. However, conventional AirComp minimizes communication distortion, whereas MoE aggregation errors have unequal impact on LLM outputs. We propose a logit-aware MIMO AirComp framework that estimates local logit sensitivity as block-level weights and jointly optimizes receive combiners and BS precoders under per-BS power constraints. We also develop an alternating algorithm that protects decoding decisions from aggregation perturbations. Using OpenCompass, we evaluate Qwen3-30B-A3B-Instruct-2507-FP8 on GSM8K and ARC-Challenge. At 30 dB aggregation SNR, perturbed Qwen3 retains 99.3% of clean GSM8K accuracy and 94.8% of clean ARC-Challenge accuracy. In a direct ARC-Challenge closed-loop audit over 295 examples, SW-AirComp achieves 43.73% accuracy at 30 dB and 26.78% at 20 dB, outperforming unweighted, matched-filter, and zero-forcing AirComp. In the wireless simulator, SW-AirComp reduces decision-relevant aggregation distortion; at 20 dB, its final weighted-sum mean-squared error is 53.5% lower than unweighted AirComp under the same channels, samples, and sensitivity weights. Logit-RMSE and logit-gap diagnostics further show that the gain comes from reducing output-logit perturbation and lowering the risk of top-token changes.

cs.IT↗

PHY-Layer Modeling and Throughput-Driven Adaptation for Batteryless V2X Networks

Passive overlay communication for batteryless devices is an important enabling capability for next-generation vehicle-to-everything (V2X) networks. However, enabling reliable passive payload delivery without occupying additional spectrum remains challenging, since overlay signaling must be embedded into short and time-varying vehicular packets while preserving the decodability of the legacy host transmission. This paper investigates a packetized batteryless V2X overlay architecture in which a dedicated short-range communications (DSRC)-based packet simultaneously carries conventional V2X data and a passive overlay payload. A compact PHY-layer model is developed to characterize the coupled effects of attenuation depth, embedded-bit rate, and legacy modulation and coding scheme (MCS) on host-link and passive-link reliability, as well as packet-level embedding feasibility. We then formulate a sum-throughput maximization problem that jointly accounts for the legacy packet error rate and passive decoding error rate. We further propose a multi-agent reinforcement learning (MARL)-based adaptive parameter-selection method. Simulation results show that the proposed MARL controller achieves stable convergence and improves the average throughput by 15\%, demonstrating the effectiveness of throughput-driven PHY adaptation for batteryless V2X overlay communications.

eess.SY↗

Data-Driven Batteryless Channel Sounding for Wi-Fi 8-Inspired Downlink MU-MIMO

Batteryless overlays couple passive throughput to Wi-Fi sounding overhead and channel state information (CSI) aging. This paper investigates channel sounding for ultra-high reliability (UHR) operation in a Wi-Fi 8/IEEE 802.11bn-inspired downlink multi-user multiple-input multiple-output (MU-MIMO) system with a batteryless passive overlay. We optimize the post-sounding transmission interval to maximize the aggregate throughput of the active Wi-Fi and passive links, while jointly accounting for sounding overhead, CSI aging, modulation and coding scheme (MCS), passive attenuation, and passive data rate. A packet-level cross-layer model evaluates the cycle-average throughput, and a data-driven search identifies the optimal interval under different operating conditions. Simulations demonstrate that passive overlay reshapes the conventional sounding tradeoff: depending on the MCS and passive-link configuration, the additional passive throughput may or may not compensate for the associated Wi-Fi reliability loss, causing the optimal interval to shift. The results provide design guidance for reliable and low-power MU-MIMO WLANs.

cs.IT↗

RIS-Aided E2E Multi-Path Uplink Transmission Optimization for 6G Time-Sensitive Services

The Access Traffic Steering, Switching, and Splitting (ATSSS) defined in the latest 3GPP Release 19 enables traffic flow over the multiple access paths to achieve the lower-latency End-to-end (E2E) delivery for 6G time-sensitive services. However, the existing E2E multi-path operation often falls short of more stringent QoS requirements for 6G time-sensitive services. This work proposes a Reconfigurable Intelligent Surfaces (RIS)-aided E2E multi-path uplink (UL) transmission architecture that explicitly accounts for both radio link latency and N3 backhaul latency, via the coupled designs of the UL traffic-splitting ratio, transmit power, receive combining, and RIS phase shift under practical constraints to achieve the minimum average E2E latency. We develop an alternating optimization framework that updates the above target parameters to be optimized. The simulations were conducted to compare the effectiveness of the proposed E2E optimization framework that lowers the average E2E latency up to 43% for a single user and 32% for the whole system compared with baselines in our prior work [1].

eess.SY↗

Toward 6G Sidelink Reliability: MAC PRR Modeling for NR Mode 2 SPS and ns-3 Validation

5G New Radio (NR) Sidelink (SL) Mode 2 has enabled decentralized, infrastructure-less direct communications which is evolving to serve reliability-critical services in 6G SL. Particularly, the channel access in NR SL Mode 2 relies on the Sensing-based Semi-Persistent Scheduling (SPS) whose key features significantly influence the packet reception ratio (PRR). While SPS has been widely studied, existing analytical models typically abstract or omit several NR-specific SPS features that are standardized in the 3rd Generation Partnership Project (3GPP), limiting their ability to explain how SPS parameters shape MAC collision dynamics and PRR. This paper develops an analytical MAC-layer PRR model for broadcast NR SL mode 2 by explicitly modeling SPS-driven MAC collision events. The model captures (i) Collisions caused by simultaneous resource reselection and (ii) Persistent collisions induced by resource keeping across resource reservation intervals (RRIs). Based on the event-level characterization, we derive closed-form expressions for the steady-state MAC collision probability and PRR. We further extend the analysis to incorporate under-explored SPS features, including the duplicate transmissions per RRI and the minimum resource-availability requirement for reselection, and quantify their impact on PRR in under-saturated regimes. The analytical results are validated using ns-3 simulations based on the 5G-LENA framework, showing close agreement under under-saturation and revealing deviations as the system approaches saturation. The proposed model provides mechanistic insight and design guidance of tuning the SPS parameters to improve 6G SL reliability.

cs.NI↗

A Lightweight Coordinate-Conditioned Diffusion Approach for 6G C-V2X Radio Environment Maps

Transmitter vehicles that broadcast 6G Cellular Vehicle-to-Everything (C-V2X)-based messages, e.g., Basic Safety Messages (BSMs), are prone to be impacted by PHY issues due to the lack of dynamic high-fidelity Radio Environment Map (REM) with dynamic location variation. This paper explores a lightweight diffusion-based generative approach, the Coordinate-Conditioned Denoising Diffusion Probabilistic Model (CCDDPM), that leverages the signal intensity-based 6G V2X Radio Environment Map (REM) from limited historical transmitter vehicles in a specific region, to predict the REMs for a transmitter vehicle with arbitrary coordinates across the same region. The transmitter vehicle coordinate is encoded as a smooth Gaussian prior and fused with the Gaussian noise through a lightweight two-channel conditional U-Net architecture. We demonstrate that the predicted REM closely matches the statistics and structure of ground-truth REM while exhibiting the improved stability and over other widely applied generative AI approaches. The resulting predictor enables rapid and scenario-consistent REM with arbitrary transmitter coordinates, which thereby supports more efficient 6G C-V2X communications where transmitter vehicles are less likely to suffer from the PHY issues.

cs.NI↗

SALT-V: Lightweight Authentication for 5G V2X Broadcasting

Vehicle-to-Everything (V2X) communication faces a critical authentication dilemma: traditional public-key schemes like ECDSA provide strong security but impose 2 ms verification delays unsuitable for collision avoidance, while symmetric approaches like TESLA achieve microsecond-level efficiency at the cost of 20-100 ms key disclosure latency. Neither meets 5G New Radio (NR)-V2X's stringent requirements for both immediate authentication and computational efficiency. This paper presents SALT-V, a novel hybrid authentication framework that reconciles this fundamental trade-off through intelligent protocol stratification. SALT-V employs ECDSA signatures for 10% of traffic (BOOT frames) to establish sender trust, then leverages this trust anchor to authenticate 90% of messages (DATA frames) using lightweight GMAC operations. The core innovation - an Ephemeral Session Tag (EST) whitelist mechanism - enables 95% of messages to achieve immediate verification without waiting for key disclosure, while Bloom filter integration provides O(1) revocation checking in 1 us. Comprehensive evaluation demonstrates that SALT-V achieves 0.035 ms average computation time (57x faster than pure ECDSA), 1 ms end-to-end latency, 41-byte overhead, and linear scalability to 2000 vehicles, making it the first practical solution to satisfy all safety-critical requirements for real-time V2X deployment.

cs.CR↗

LLP-V2X: Low Latency-Power Vehicular Networking Towards 6G V2X

The trade-off between energy and latency budgets is becoming significant due to the more stringent QoS requirements in 6G vehicular networks. However, comprehensively studying the trade-off between energy and latency budgets for 6G vehicular network with new Vehicle-to-Everything (V2X) features is still under-explored. This paper proposes a novel multi-hop, multi-path vehicular networking that jointly optimizes vehicular traffic splitting across candidate routes and per-link transmit power to achieve low-latency and low-power communications. Afterwards, we formalize two complementary problem formulations (minimum latency and minimum power) based on the proposed 6G V2X architecture and provide sufficient conditions. The performance of the proposed scheme is evaluated via well-designed simulations. Based on these theories, we design algorithm (LLP MHMP Scheduler) that switches on demand between a fixed-power minimum-latency mode and a fixed-latency minimum-power mode.

cs.NI↗

EPFL-REMNet: Efficient Personalized Federated Digital Twin Towards 6G Heterogeneous Radio Environment

Radio Environment Map (REM) is transitioning from 5G homogeneous environments to B5G/6G heterogeneous landscapes. However, standard Federated Learning (FL), a natural fit for this distributed task, struggles with performance degradation in accuracy and communication efficiency under the non-independent and identically distributed (Non-IID) data conditions inherent to these new environments. This paper proposes EPFL-REMNet, an efficient personalized federated framework for constructing a high-fidelity digital twin of the 6G heterogeneous radio environment. The proposed EPFL-REMNet employs a"shared backbone + lightweight personalized head" model, where only the compressed shared backbone is transmitted between the server and clients, while each client's personalized head is maintained locally. We tested EPFL-REMNet by constructing three distinct Non-IID scenarios (light, medium, and heavy) based on radio environment complexity, with data geographically partitioned across 90 clients. Experimental results demonstrate that EPFL-REMNet simultaneously achieves higher digital twin fidelity (accuracy) and lower uplink overhead across all Non-IID settings compared to standard FedAvg and recent state-of-the-art methods. Particularly, it significantly reduces performance disparities across datasets and improves local map accuracy for long-tail clients, enhancing the overall integrity of digital twin.

cs.NI↗

Static Background Removal in Vehicular Radar: Filtering in Azimuth-Elevation-Doppler Domain

Anti-collision assistance, integral to the current drive towards increased vehicular autonomy, relies heavily on precise detection and localization of moving targets in the vehicle's vicinity. A crucial step towards achieving this is the removal of static objects from the scene, thereby enhancing the detection and localization of dynamic targets - a pivotal aspect in augmenting overall system performance. In this paper, we propose a static background removal algorithm tailored for automotive scenarios, designed for common frequency-modulated continuous wave (FMCW) radars. This algorithm effectively eliminates reflections corresponding to static backgrounds from radar images through a two-step process: 4-dimensional (4D) radar imaging and filtering in the azimuth-elevation-Doppler domain. Our proposed approach is underpinned by a model customized for FMCW radar signals, incorporating a time-division multiplexing-based multiple-input multiple-output scheme on the non-uniform radar array. Furthermore, our filtering process requires knowledge of the 3-dimensional (3D) radar ego-motion velocity, typically obtained from an external sensor. To address scenarios where such sensors are unavailable, we introduce a self-contained 3D ego-motion estimation approach. Finally, we evaluate the performance of our algorithm using both simulated and real-world data, analyzing its sensitivity and time complexity in comparison to established baselines.

eess.SP↗

Revisiting Multi-User Downlink in IEEE 802.11ax: A Designers Guide to MU-MIMO

Downlink (DL) Multi-User (MU) Multiple Input Multiple Output (MU-MIMO) is a key technology that allows multiple concurrent data transmissions from an Access Point (AP) to a selected sub-set of clients for higher network efficiency in IEEE 802.11ax. However, DL MU-MIMO feature is typically turned off as the default setting in AP vendors' products, that is, turning on the DL MU-MIMO may not help increase the network efficiency, which is counter-intuitive. In this article, we provide a sufficiently deep understanding of the interplay between the various underlying factors, i.e., CSI overhead and spatial correlation, which result in negative results when turning on the DL MU-MIMO. Furthermore, we provide a fundamental guideline as a function of operational scenarios to address the fundamental question "when the DL MU-MIMO should be turned on/off".

cs.NI↗

Non-Primary Channel Access in IEEE 802.11 UHR: Comprehensive Analysis and Evaluation

The evolution of the IEEE 802.11 standards marks a significant throughput advancement in wireless access technologies, progressively increasing bandwidth capacities from 20 MHz in the IEEE 802.11a to up to 320 MHz in the latest IEEE 802.11be (Wi-Fi 7). However, the increased bandwidth capacities may not be well exploited due to inefficient bandwidth utilization on multiple channels. This issue typically occurs when the primary channel is busy, secondary channels (also known as non-primary channels) are prevented from being utilized even if they are idle, thereby wasting the available bandwidth. This paper investigates the fundamentals of the Non-Primary Channel Access (NPCA) protocol that was defined in IEEE 802.11 Ultra-High Reliability (UHR) group to cope with the above issue. We develop a novel analytical model to assess NPCA protocol performance in terms of the average throughput and delay. Via simulation, we verify that the NPCA network outperforms the legacy network by increasing at least 50% average throughput while reducing at least 40% average delay.

cs.NI↗

Optimized Non-Primary Channel Access Design in IEEE 802.11bn

The IEEE 802.11 standards, culminating in IEEE 802.11be (Wi-Fi 7), have significantly expanded bandwidth capacities from 20 MHz to 320 MHz, marking a crucial evolution in wireless access technology. Despite these advancements, the full potential of these capacities remains largely untapped due to inefficiencies in channel management, in particular, the underutilization of secondary (non-primary) channels when the primary channel is occupied. This paper delves into the Non-Primary Channel Access (NPCA) protocol, initially proposed by the IEEE 802.11 Ultra-High Reliability (UHR) group, aimed at addressing these inefficiencies. Our research not only proposes an analytical model to assess the throughput of NPCA in terms of average throughput but also crucially identifies that the overhead associated with the NPCA protocol is significant and cannot be ignored. This overhead often undermines the effectiveness of the NPCA, challenging the assumption that it is invariably superior to traditional models. Based on these findings, we have developed and simulated a new hybrid model that dynamically integrates the strengths of both legacy and NPCA models. This model overall outperforms the existing models under all channel occupancy conditions, offering a robust solution to enhance throughput efficiency.

cs.NI↗

IEEE 802.11be Network Throughput Optimization with Multi-Link Operation and AP Coordination

IEEE 802.11be (Wi-Fi 7) introduces a new concept called multi-link operation (MLO), which allows multiple Wi-Fi interfaces in different bands (2.4, 5, and 6 GHz) to work together to increase network throughput, reduce latency, and improve spectrum reuse efficiency in dense overlapping networks. To make the most of MLO, this paper proposes a new data-driven resource allocation algorithm for the 11be network with the aid of an access point (AP) controller. To maximize network throughput, a network topology optimization problem is formulated for 11be network, which is solved by exploiting the totally unimodular property of the bipartite graph formed by the connection between AP and station (STA) in Wi-Fi networks. Subsequently, a proportional fairness algorithm is applied for radio link allocation, network throughput optimization considering the channel condition, and the fairness of the multi-link device (MLD) data rate. The performance of the proposed algorithm on two main MLO implementations - multi-link multi-radio (MLMR) with simultaneous transmission and reception (STR), and the interplay between multiple nodes employing them are evaluated through cross-layer (PHY-MAC) data rate simulation with PHY abstraction.

cs.NI↗

RBFormer: Improve Adversarial Robustness of Transformer by Robust Bias

Recently, there has been a surge of interest and attention in Transformer-based structures, such as Vision Transformer (ViT) and Vision Multilayer Perceptron (VMLP). Compared with the previous convolution-based structures, the Transformer-based structure under investigation showcases a comparable or superior performance under its distinctive attention-based input token mixer strategy. Introducing adversarial examples as a robustness consideration has had a profound and detrimental impact on the performance of well-established convolution-based structures. This inherent vulnerability to adversarial attacks has also been demonstrated in Transformer-based structures. In this paper, our emphasis lies on investigating the intrinsic robustness of the structure rather than introducing novel defense measures against adversarial attacks. To address the susceptibility to robustness issues, we employ a rational structure design approach to mitigate such vulnerabilities. Specifically, we enhance the adversarial robustness of the structure by increasing the proportion of high-frequency structural robust biases. As a result, we introduce a novel structure called Robust Bias Transformer-based Structure (RBFormer) that shows robust superiority compared to several existing baseline structures. Through a series of extensive experiments, RBFormer outperforms the original structures by a significant margin, achieving an impressive improvement of +16.12% and +5.04% across different evaluation criteria on CIFAR-10 and ImageNet-1k, respectively.

cs.CV↗

A Light-Weight Communication-Efficient Data Sharing Approach in 5G NR V2X

Timeliness of information is critical for Basic Safety Messages (BSMs) in Vehicle-to-Everything (V2X) communication to enable highly reliable autonomous driving. However, the current semi-persistent scheduling (SPS) algorithms in the 5th generation New Radio (5G NR) standard can still generate collisions probability, close to 20% with 100 vehicles per kilometer, such that they cannot meet this requirement for BSMs. This paper proposes a Ledger concept, which can communicate collision information to every vehicle in the network within one Resource Reservation Interval (RRI) through the broadcasting of Ledger information. The colliding vehicle is aware that it has collided with other vehicles and will reselect for the next SPS period. Besides that, other protocols follow the SPS. Although it sacrifices 14.29% of resources by including Ledger, it can eventually reduce the collision probability. In this paper, a Monte Carlo simulator is used to verify and analyze the performance of the Ledger system. Numerical results show that abide by the SPS protocol, the Ledger system can make the collision probability converge to zero after amount of RRIs.

eess.SY↗