arXiv subjects

Luyang Zhao

Publications and source records attributed to Luyang Zhao.

13 recordsLinked to original sources

arXiv2026

Codec-Gauge: Learning Compression-Friendly Gauges for Transformer KV Caches

Long-context Transformer inference increasingly relies on KV-cache compression or quantization. Prior rotation and transform-coding results suggest that the channel basis of each key/value vector affects how faithfully a fixed backend preserves model behavior. We introduce Codec-Gauge, a post-training cache-coordinate layer that learns small orthogonal channel transforms around existing compression and quantization backends. Its frequency-distribution objective combines a token-channel DCT spectral-centroid loss with a smooth rate proxy to concentrate KV energy in low-frequency codec-facing layouts. We evaluate actual compression and decompression using measured bytes and rolling compressed-history scoring. Across six models at $3$, $4$, and $6$ bits/value, learned gauges reduce zfp KL divergence by $44.0\%$ on average relative to raw coordinates and outperform random, Hadamard, DCT, and PCA/KLT controls. The same gauges improve quality preservation for block-uniform and KIVI-style quantization. Experiments on a 27B model and long-context task prompts reproduce the quality trend, while serial storage and timing measurements validate the implemented compressed-cache paths. These results establish cache-coordinate geometry as a practical post-training variable for improving compression fidelity without changing model weights, attention semantics, or backend coding rules.

cs.LG↗

arXiv2026

Manipulider: A Multi-Engine Buoyancy-Controlled Robot for Thrusterless Underwater Gliding and Manipulation

The Manipulider is a buoyancy-actuated underwater robot that enables thrusterless, glide-like locomotion and attitude-based manipulation, while providing a magnetic modular interface for rapid payload swapping (e.g., a gripper or sensors). Four syringe-based buoyancy engines distributed around the body jointly regulate net buoyancy and the center of buoyancy, allowing the vehicle to maintain large tilt angles through static force balance without continuous thrust and to avoid propeller entanglement risks. We present the mechanical and electrical design, calibration procedure, and control architecture. Experiments with a gripper attached (no external payload) show a controllable buoyancy-displacement range of 40 mL per engine ({\approx}160 g total buoyancy authority), maximum statically stable tilts of 64.6{\deg} (single-engine) and 61.8{\deg} (dual-engine), and representative vertical and tilt-transition dynamics. We further demonstrate tilt regulation, controlled ascent/descent primitives, and a proof-of-concept gripper-based payload-transport sequence without thrusters.

cs.RO↗

arXiv2026

ASCII Art Turns LLMs into VLA Controllers

Vision--Language--Action (VLA) controllers are often built by extending vision--language models (VLMs) with action supervision, relying on multimodal backbones with large data and compute requirements. We demonstrate that a text-only large language model (LLM) can be adapted into a VLA-style controller when visual observations are rendered into a text input using an ASCII representation. This ASCII-as-vision interface enables existing training and deployment stacks for LLMs to efficiently condition on visual state, follow natural-language instructions, and produce constrained, executable actions. We fine-tune and compare multiple LLMs and VLMs across model families and scales, using both expert demonstrations from a planning-based teacher, as well as DAgger for iterative improvement. In a 2D manipulation benchmark, in both simulation and on a physical manipulator, the resulting controllers can identify task-relevant entities and plan feasible action sequences. Our results suggest that ASCII rendering can serve as a lightweight, interpretable modality bridge from images to text, complementing conventional VLA pipelines, and opening directions for VLA research with text-only backbones.

cs.RO↗

arXiv2026

FlowMo-WM: A World Model with Object Momentum and Hidden Ambient Drift

World models in robot learning predict future states from visual observations and actions, enabling agents to reason about the consequences of their controls. However, many action-conditioned models are evaluated in settings where motion is dominated by immediate control, whereas aquatic surface vehicles and other real-world objects continue moving under inertia and are displaced by hidden ambient drift, such as water currents or wind. We propose FlowMo-WM, an end-to-end trainable visual world model that infers object-centric motion state and a predictive long-history context associated with hidden drift from image-action histories without direct supervision of flow fields. FlowMo-WM factorizes image-action history into a short-history latent state, trained to summarize object-centric motion, and a longer-history context, trained to summarize slowly varying exogenous influences. A zero-context residual transition separates action-conditioned base dynamics from context-dependent drift effects during latent rollout. In simulated aquatic surface-vehicle environments with diverse hidden flows, disturbances, and randomized vehicle dynamics, FlowMo-WM improves long-horizon rollout accuracy over representative action-conditioned latent world models. Prediction-time context ablations, in which the inferred context is zeroed or shuffled during rollout, show that the ambient context is important for stable prediction under hidden drift, while frozen linear probes characterize information encoded in the learned factors.

cs.RO↗

arXiv2025

Towards Unified AI-Driven Fracture Mechanics: The Extended Deep Energy Method (XDEM)

Physics-Informed Neural Networks (PINNs) have recently emerged as powerful tools for solving partial differential equations (PDEs), with the Deep Energy Method (DEM) proving especially effective in fracture mechanics due to its energy-based formulation. Despite these advances, existing DEM approaches require dense collocation near cracks, face stability challenges, and typically treat discrete and continuous fracture models separately. To overcome these limitations, we introduce the Extended Deep Energy Method (XDEM), a unified deep learning framework that incorporates both displacement discontinuities and crack-tip asymptotics in the discrete setting, while flexibly coupling displacement and phase fields in the continuous setting. This integration enables accurate fracture predictions using uniformly distributed, relatively sparse collocation points. Validation across benchmark problems including stress intensity factor evaluation, straight and kinked crack growth, and complex crack initiation demonstrates that XDEM consistently outperforms standard DEM in accuracy and efficiency. By bridging discrete and phase-field models within a single framework, XDEM establishes a robust foundation for applying AI to fracture mechanics and opens new avenues for predictive modeling in engineering and materials science.

physics.comp-ph↗

arXiv2025

LENNs: Locally Enhanced Neural Networks for High-Fidelity Modeling in Solid Mechanics

Despite prior advances in PINNs, significant challenges remain in localized solid mechanics problems because of the limitations of single network formulations in simultaneous resolution of smooth global responses and near-tip singularities, and inadequacy in discontinuity representation, leading to unstable training and limited accuracy. To address the challenges, we propose Locally Enhanced Neural Networks (LENNs) that characterize localized discontinuities in solid mechanics via multilevel modeling. In particular, this novel framework employs a global network for the bulk solution and activates a local network in localized area for non-smooth response, coupled through a smooth window function that enables weighted superposition of local and global solutions. Moreover, the local network embeds additional functions that encode the discontinuous information into the input to capture localized non-smooth mechanical behaviors. Finally, the composite solution is substituted into the total potential energy functional for unified optimization. With this structure, the method resolves the conflict of single network in representing both smooth global and singular local fields without additional interface-loss terms and amplifies the contribution of localized critical features in energy optimization. We focus on a series of numerical experiments in solid mechanics to demonstrate the performance of the method. Results show that LENNs perform well in addressing localized discontinuous problems and provide accurate predictions for both displacement and stress fields.

physics.comp-ph↗

arXiv2024

On the Exploration of LM-Based Soft Modular Robot Design

Recent large language models (LLMs) have demonstrated promising capabilities in modeling real-world knowledge and enhancing knowledge-based generation tasks. In this paper, we further explore the potential of using LLMs to aid in the design of soft modular robots, taking into account both user instructions and physical laws, to reduce the reliance on extensive trial-and-error experiments typically needed to achieve robot designs that meet specific structural or task requirements. Specifically, we formulate the robot design process as a sequence generation task and find that LLMs are able to capture key requirements expressed in natural language and reflect them in the construction sequences of robots. To simplify, rather than conducting real-world experiments to assess design quality, we utilize a simulation tool to provide feedback to the generative model, allowing for iterative improvements without requiring extensive human annotations. Furthermore, we introduce five evaluation metrics to assess the quality of robot designs from multiple angles including task completion and adherence to instructions, supporting an automatic evaluation process. Our model performs well in evaluations for designing soft modular robots with uni- and bi-directional locomotion and stair-descending capabilities, highlighting the potential of using natural language and LLMs for robot design. However, we also observe certain limitations that suggest areas for further improvement.

cs.RO↗

arXiv2024

An Untethered Bioinspired Robotic Tensegrity Dolphin with Multi-Flexibility Design for Aquatic Locomotion

This paper presents the first steps toward a soft dolphin robot using a bio-inspired approach to mimic dolphin flexibility. The current dolphin robot uses a minimalist approach, with only two actuated cable-driven degrees of freedom actuated by a pair of motors. The actuated tail moves up and down in a swimming motion, but this first proof of concept does not permit controlled turns of the robot. While existing robotic dolphins typically use revolute joints to articulate rigid bodies, our design -- which will be made opensource -- incorporates a flexible tail with tunable silicone skin and actuation flexibility via a cable-driven system, which mimics muscle dynamics and design flexibility with a tunable skeleton structure. The design is also tunable since the backbone can be easily printed in various geometries. The paper provides insights into how a few such variations affect robot motion and efficiency, measured by speed and cost of transport (COT). This approach demonstrates the potential of achieving dolphin-like motion through enhanced flexibility in bio-inspired robotics.

cs.RO↗

arXiv2024

SoftSnap: Rapid Prototyping of Untethered Soft Robots Using Snap-Together Modules

Soft robots offer adaptability and safe interaction with complex environments. Rapid prototyping kits that allow soft robots to be assembled easily will allow different geometries to be explored quickly to suit different environments or to mimic the motion of biological organisms. We introduce SoftSnap modules: snap-together components that enable the rapid assembly of a class of untethered soft robots. Each SoftSnap module includes embedded computation, motor-driven string actuation, and a flexible thermoplastic polyurethane (TPU) printed structure capable of deforming into various shapes based on the string configuration. These modules can be easily connected with other SoftSnap modules or customizable connectors. We demonstrate the versatility of the SoftSnap system through four configurations: a starfish-like robot, a brittle star robot, a snake robot, a 3D gripper, and a ring-shaped robot. These configurations highlight the ease of assembly, adaptability, and functional diversity of the SoftSnap modules. The SoftSnap modular system offers a scalable, snap-together approach to simplifying soft robot prototyping, making it easier for researchers to explore untethered soft robotic systems rapidly.

cs.RO↗

arXiv2024

DEDEM: Discontinuity Embedded Deep Energy Method for solving fracture mechanics problems

Physics-Informed Neural Networks (PINNs) have aroused great attention for its ability to address forward and inverse problems of partial differential equations. However, approximating discontinuous functions by neural networks poses a considerable challenge, which results in high computational demands and low accuracy to solve fracture mechanics problems within standard PINNs framework. In this paper, we present a novel method called Discontinuity Embedded Deep Energy Method (DEDEM) for modeling fracture mechanics problems. In this method, interfaces and internal boundaries with weak/strong discontinuities are represented by discontinuous functions constructed by signed distance functions, then the representations are embedded to the input of the neural network so that specific discontinuous features can be imposed to the neural network solution. Results demonstrate that DEDEM can accurately model the mechanical behaviors of cracks on a large variety of fracture problems. Besides, it is also found that DEDEM achieves significantly higher computational efficiency and accuracy than the existing methods based on domain decomposition techniques.

cs.CE↗

arXiv2024

SeePerSea: Multi-modal Perception Dataset of In-water Objects for Autonomous Surface Vehicles

This paper introduces the first publicly accessible labeled multi-modal perception dataset for autonomous maritime navigation, focusing on in-water obstacles within the aquatic environment to enhance situational awareness for Autonomous Surface Vehicles (ASVs). This dataset, collected over 4 years and consisting of diverse objects encountered under varying environmental conditions, aims to bridge the research gap in ASVs by providing a multi-modal, annotated, and ego-centric perception dataset, for object detection and classification. We also show the applicability of the proposed dataset by training and testing current deep learning-based open-source perception algorithms that have shown success in the autonomous ground vehicle domain. With the training and testing results, we discuss open challenges for existing datasets and methods, identifying future research directions. We expect that our dataset will contribute to the development of future marine autonomy pipelines and marine (field) robotics. This dataset is open source and found at https://seepersea.github.io/.

cs.RO↗

arXiv2021

Soft Lattice Modules that Behave Independently and Collectively

Natural systems integrate the work of many sub-units (cells) toward a large-scale unified goal (morphological and behavioral), which can counteract the effects of unexpected experiences, damage, or simply changes in tasks demands. In this paper, we exploit the opportunities presented by soft, modular, and tensegrity robots to introduce soft lattice modules that parallel the sub-units seen in biological systems. The soft lattice modules are comprised of 3D printed plastic "skeletons", linear contracting shape memory alloy spring actuators, and permanent magnets that enable adhesion between modules. The soft lattice modules are capable of independent locomotion, and can also join with other modules to achieve collective, self-assembled, larger scale tasks such as collective locomotion and moving an object across the surface of the lattice assembly. This work represents a preliminary step toward soft modular systems capable of independent and collective behaviors, and provide a platform for future studies on distributed control.

cs.RO↗

arXiv2020

Piecewise linear regressions for approximating distance metrics

This paper presents a data structure that summarizes distances between configurations across a robot configuration space, using a binary space partition whose cells contain parameters used for a locally linear approximation of the distance function. Querying the data structure is extremely fast, particularly when compared to the graph search required for querying Probabilistic Roadmaps, and memory requirements are promising. The paper explores the use of the data structure constructed for a single robot to provide a heuristic for challenging multi-robot motion planning problems. Potential applications also include the use of remote computation to analyze the space of robot motions, which then might be transmitted on-demand to robots with fewer computational resources.

cs.RO↗