arXiv subjects

Luigi Lessio

Publications and source records attributed to Luigi Lessio.

9 recordsLinked to original sources

arXiv2025

Final design of Cerberus, a three-headed instrument for the OARPAF telescope

Cerberus will be a new scientific instrument for the alt-az, 1m-class OARPAF telescope in Northern Italy. Currently, the telescope operates with a CCD camera used for imaging and photometry. One of the objectives of the project is to improve this observing mode with a tip-tilt lens for image stabilization up to 10Hz. Moreover, a long-slit spectroscopy at R 5900 and an optical fiber \'echelle spectroscopy at R 9300 observing modes will be included. These addtional two "heads" of Cerberus will be exclusively selected by moving flat 45 degree mirrors by means of a linear stage placed in a new custom interface flange. The flange will replace the existing one, recovering the included field flattener lens, to ensure optical correction of the imaging channel. We present the already procured COTS hardware, the opto-mechanical design of the interface flange, the results of the Zemax ray tracing and the design of the web-based instrument control software.

astro-ph.IM↗

arXiv2024

New developments on the Ingot WFS laboratory testing

The Ingot WFS was designed to overcome some of the challenges present in classical wavefront sensors when they deal with sodium LGSs. This innovative sensor works by sensing the full 3D volume of the elongated LGS and is suitable for use in very large telescopes. A test bench has been assembled at the INAF - Osservatorio Astronomico di Padova laboratories to test and characterize the functioning of the Ingot WFS. In this work, we summarize the main results of the tests performed on a new search algorithm. Then, we move towards a more accurate simulation of the sodium LGS by replicating real time-varying sodium layer profiles. The study of their impact on the ingot pupil signals is described in this work.

astro-ph.IM↗

arXiv2024

The status of the NIR arm of the SOXS Instrument toward the PAE

The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory [1]. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph [1], in the range 0.80-2.00 {\mu}m with 15 orders, equipped with an 2k x 2k Hawaii H2RG IR array from Teledyne, working at 40K, that is currently assembled and tested on the SOXS instrument, in the premises of INAF in Padova. We describe the different tests and results of the cryo, vacuum, opto-mechanics and detector subsystems that finally will be part of the PAE by ESO.

astro-ph.IM↗

arXiv2024

What is your favorite transient event? SOXS is almost ready to observe!

The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).

astro-ph.IM↗

arXiv2024

The integration of the SOXS control electronics towards the PAE

SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and preliminary test of the control electronics at INAF - Astronomical Observatory of Capodimonte (Napoli), the two main control cabinets of SOXS are now hosted in Padova, connected to the real hardware. This contribution describes the final electronic cabinets layout, the control strategy and the different integration phases, waiting for the Preliminary Acceptance in Europe and the installation of the instrument in Chile.

astro-ph.IM↗

arXiv2019

Development of the Warm Astrometric Mask for MICADO astrometry calibration

The achievement of $\mu$arcsec relative astrometry with ground-based, near infrared, extremely large telescopes requires a significant endeavour of calibration strategies. In this paper we address the removal of instrument optical distortions coming from the ELT first light instrument MICADO and its adaptive optics system MAORY by means of an astrometric calibration mask. The results of the test campaign on a prototype mask (scale 1:2) has probed the manufacturing precision down to $\sim$ 50nm/1mm scale, leading to a relative precision $\delta\sigma \sim 5e-5$. The assessed manufacturing precision indicates that an astrometric relative precision of $\delta\sigma \sim 5e-5 = \frac{50\mu as}{1 arcsec}$ is in principle achievable, disclosing $\mu$arcsec near infrared astrometry behind an extremely large telescope. The impact of $\sim$ 10-100 nm error residuals on the mask pinholes position is tolerable at a calibration level as confirmed by ray tracing simulations of realistic MICADO distortion patterns affected by mid spatial frequencies residuals. We demonstrated that the MICADO astrometric precision of 50 $\mu$as is achievable also in presence of a mid spatial frequencies pattern and manufacturing errors of the WAM by fitting the distorted WAM pattern seen through the instrument with a 10$^{th}$ order Legendre polynomial.

astro-ph.IM↗

arXiv2018

A 3.9 km baseline intensity interferometry photon counting experiment

In the last years we have operated two very similar ultrafast photon counting photometers (Iqueye and Aqueye+) on different telescopes. The absolute time accuracy in time tagging the detected photon with these instruments is of the order of 500 ps for hours of observation, allowing us to obtain, for example, the most accurate ever light curve in visible light of the optical pulsars. Recently we adapted the two photometers for working together on two telescopes at Asiago (Italy), for realizing an Hanbury-Brown and Twiss Intensity Interferometry like experiment with two 3.9 km distant telescopes. In this paper we report about the status of the activity and on the very preliminary results of our first attempt to measure the photon intensity correlation.

astro-ph.IM↗

arXiv2018

SHARK-NIR, the coronagraphic camera for LBT, moving toward construction

SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities.

astro-ph.IM↗

arXiv2015

A facility to evaluate the focusing performance of mirrors for Cherenkov Telescopes

Cherenkov Telescopes are equipped with optical dishes of large diameter -- in general based on segmented mirrors -- with typical angular resolution of a few arc-minutes. To evaluate the mirror's quality specific metrological systems are required that possibly take into account the environmental conditions in which typically these telescopes operate (in open air without dome protection). For this purpose a new facility for the characterization of mirrors has been developed at the labs of the Osservatorio Astronomico di Brera of the Italian National Institute of Astrophysics. The facility allows the precise measurement of the radius of curvature and the distribution of the concentred light in terms of focused and scattered components and it works in open air. In this paper we describe the facility and report some examples of its measuring capabilities.

astro-ph.IM↗