arXiv subjects

Luca Colombo

Publications and source records attributed to Luca Colombo.

At least 19 recordsLinked to original sources

arXiv2025

Enhanced Permittivity in Wurtzite ScAlN through Nanoscale Sc Clustering

ScN alloyed AlN (ScxAl1-xN, ScAlN) is a wurtzite semiconductor with attractive ferroelectric, dielectric, piezoelectric, and optical properties. Here, we show that ScAlN films (with x spanning 0.18 to 0.36) contain nanoscale Sc-rich clusters which maintain the wurtzite crystal structure. While both molecular beam epitaxy (MBE) and sputter deposited Sc0.3Al0.7N films show Sc clustering, the degree of clustering is significantly stronger for the MBE-grown film, offering an explanation for some of the discrepancies between MBE-grown and sputtered films reported in the literature. Moreover, the MBE-grown Sc0.3Al0.7N film exhibits a dispersive and anomalously large dielectric permittivity, roughly double that of sputtered Sc0.3Al0.7N. We attribute this result to the Sc-rich clusters locally reaching x ~ 0.5 and approaching the predicted ferroelectric-to-paraelectric phase transition, resulting in a giant (local) enhancement in permittivity. The Sc-rich clusters should similarly affect the piezoelectric, optical, and ferroelectric responses, suggesting cluster-engineering as a means to tailor ScAlNs functional properties.

cond-mat.mtrl-sci↗

arXiv2025

Toward Enhanced Inertial Sensing via Dynamically Soft Topological States in Piezoelectric Microacoustic Metamaterials

In recent decades, microelectromechanical systems (MEMS)-based gyroscopes have been employed to meet positioning and navigation demands of a plethora of commercially available devices. Most of such gyroscopes rely on electrostatic actuators with nanometer-scale air gaps$\unicode{x2013}$an architecture that enables large particle velocities in a proof mass and, consequently, high Coriolis-force sensitivity to angular velocity$\unicode{x2013}$but is inherently susceptible to damage under shock and vibration. This vulnerability is typically mitigated by purposely reducing gyroscopic sensitivity, thereby compromising readout accuracy. Microacoustic gyroscopes, by contrast, offer greater resilience to shock and vibration but currently exhibit significantly lower sensitivities. This limitation stems from the low dynamic compliance of the modes they employ$\unicode{x2013}$typically Lamb or Rayleigh modes$\unicode{x2013}$which restricts their maximum achievable particle velocity. This work presents a piezoelectric microacoustic device that overcomes this fundamental constraint by harnessing a topological interface state at the boundary between two microscale metamaterial structures. We theoretically and experimentally show that this state exhibits much higher modal compliance than Lamb or Rayleigh modes. This enables record-high particle velocities (>51 m/s) never reached, due to material limits, by any previously demonstrated piezoelectric gyroscope.

physics.app-ph↗

arXiv2025

BEP: A Binary Error Propagation Algorithm for Binary Neural Networks Training

Binary Neural Networks (BNNs), which constrain both weights and activations to binary values, offer substantial reductions in computational complexity, memory footprint, and energy consumption. These advantages make them particularly well suited for deployment on resource-constrained devices. However, training BNNs via gradient-based optimization remains challenging due to the discrete nature of their variables. The dominant approach, quantization-aware training, circumvents this issue by employing surrogate gradients. Yet, this method requires maintaining latent full-precision parameters and performing the backward pass with floating-point arithmetic, thereby forfeiting the efficiency of binary operations during training. While alternative approaches based on local learning rules exist, they are unsuitable for global credit assignment and for back-propagating errors in multi-layer architectures. This paper introduces Binary Error Propagation (BEP), the first learning algorithm to establish a principled, discrete analog of the backpropagation chain rule. This mechanism enables error signals, represented as binary vectors, to be propagated backward through multiple layers of a neural network. BEP operates entirely on binary variables, with all forward and backward computations performed using only bitwise operations. Crucially, this makes BEP the first solution to enable end-to-end binary training for recurrent neural network architectures. We validate the effectiveness of BEP on both multi-layer perceptrons and recurrent neural networks, demonstrating gains of up to +6.89% and +10.57% in test accuracy, respectively. The proposed algorithm is released as an open-source repository.

cs.LG↗

arXiv2025

Plasmonically Enhanced Flexural-Mode AlScN Nanoplate Resonator as Uncooled and Ultrafast IR Detector with High Responsivity

This letter introduces a novel class of miniaturized, uncooled, and ultra-fast infrared (IR) resonant thermal detectors (RTDs) based on 30%-doped Aluminum Scandium Nitride (AlScN) nanoplates. Exploiting high electromechanical coupling, good thermal properties, and enhanced and selective IR absorption, the presented device aims to demonstrate significant advancements over the state-of-the-art IR RTDs. This single pixel combines compact footprint, high spectral selectivity and responsivity, reduced noise, and fast thermal response, allowing for the potential development of innovative IR thermal imagers through multi-pixel integration. The flexural nature of the actuated resonance mode eventually enables an interferometric optical readout, paving the way towards achieving extremely low Noise Equivalent Power levels. These results demonstrate a high IR responsivity of around 130 ppt/pW, a thermal time constant of around 330 us, and a large out-of-plane displacement. This work represents the first experimental integration on a resonating platform of plasmonic absorbers that utilize AlScN as dielectric layer.

physics.ins-det↗

arXiv2025

ReBoot: Encrypted Training of Deep Neural Networks with CKKS Bootstrapping

Growing concerns over data privacy underscore the need for deep learning methods capable of processing sensitive information without compromising confidentiality. Among privacy-enhancing technologies, Homomorphic Encryption (HE) stands out by providing post-quantum cryptographic security and end-to-end data protection, safeguarding data even during computation. While Deep Neural Networks (DNNs) have gained attention in HE settings, their use has largely been restricted to encrypted inference. Prior research on encrypted training has primarily focused on logistic regression or has relied on multi-party computation to enable model fine-tuning. This stems from the substantial computational overhead and algorithmic complexity involved in DNNs training under HE. In this paper, we present ReBoot, the first framework to enable fully encrypted and non-interactive training of DNNs. Built upon the CKKS scheme, ReBoot introduces a novel HE-compliant neural network architecture based on local error signals, specifically designed to minimize multiplicative depth and reduce noise accumulation. ReBoot employs a tailored packing strategy that leverages real-number arithmetic via SIMD operations, significantly lowering both computational and memory overhead. Furthermore, by integrating approximate bootstrapping, ReBoot learning algorithm supports effective training of arbitrarily deep multi-layer perceptrons, making it well-suited for machine learning as-a-service. ReBoot is evaluated on both image recognition and tabular benchmarks, achieving accuracy comparable to 32-bit floating-point plaintext training while enabling fully encrypted training. It improves test accuracy by up to +3.27% over encrypted logistic regression, and up to +6.83% over existing encrypted DNN frameworks, while reducing training latency by up to 8.83x. ReBoot is made available to the scientific community as a public repository.

cs.LG↗

arXiv2025

Power Handling Improvement in Cross-Sectional Lame Mode Resonators Operating in the Ku-band

This study presents power handling improvements in cross-sectional Lame-Mode Resonators (CLMRs) designed for operation in the Ku-band. Previously fabricated CLMR devices failed at approximately 8 dBm of input power, primarily due to electromigration in the aluminum interdigitated electrodes (IDTs). To better understand this mechanism in CLMRs, a data driven thermal model is developed to analyze localized heating effects within the resonator body, which are known to accelerate electromigration. Based on insights from this model, Aluminum Silicon Copper (AlSiCu) was selected for the IDTs due to its superior thermal stability and resistance to electromigration. Devices fabricated with AlSiCu exhibited no signs of performance degradation, with the best-performing resonator achieving a mechanical quality factor (Qm) of 360, a maximum Bode quality factor (QBode) of 500, and an electromechanical coupling coefficient (kt2) of 6.3%. Moreover, the use of AlSiCu significantly increased the maximum input power the device can withstand, showing an improvement of up to 6 dBm over previous devices. These improvements in power handling make the devices strong candidates for high-power Ku-band filtering applications.

eess.SY↗

arXiv2025

Laterally Excited Bulk Acoustic Wave (LBAW) X-Cut Lithium Niobate Resonators

In this work, Laterally excited Bulk Acoustic Wave (LBAW) resonators on X-cut Lithium Niobate (LiNbO3) and, for the first time their higher-order overtones (LOBAW) are demonstrated by embedding interdigitated electrodes recessed into the piezoelectric thin film, allowing to exploit both S0 and SH0 vibrational modes. This recessed electrode architecture decouples the dispersion relation from film thickness, enabling lithographic tuning of resonance frequency and on-chip multi-frequency scaling on a single substrate, while concurrently increasing static capacitance density (C0) and reducing ohmic losses (Rs). The excited SH0 modes exhibits Figures of Merit (FoM) of 437 at 673 MHz for the fundamental tone and 53 at 1.05 GHz for the overtone. The proposed architecture holds large potential for future 5G/6G advanced radio frequency front-end modules, enabling on-chip multi-frequency scaling and improved performance.

eess.SY↗

arXiv2025

High-performance solidly mounted bidimensional mode resonators (S2MRs) operating around 16 GHz

This paper reports on Solidly-Mounted Bidimensional Mode Resonators (S2MRs) utilizing 30% Scandium-doped Aluminum Nitride on Silicon Carbide, operating near 16 GHz. Experimental results show mechanical quality factors up to 380, electromechanical coupling coefficients of 4%, and an overall Figure of Merit (FOM=Q *kt2) exceeding 15. Additionally, Q Bode calculation is reported along with an analysis of the piezoelectric energy confinement coefficient showing the impact of thickness-to-wavelength ratio on the acoustic wave confinement. Finally, the devices demonstrate power handling capabilities greater than 20 dBm while achieving close impedance matching to 50 Ohm. These features make them strong candidates for commercial, military, and harsh-environment applications like satellite communications (SATCOM) and Active Electronically Scanned Arrays (AESA).

physics.app-ph↗

arXiv2025

Lithium niobate acoustic resonators operating beyond 900 $^\circ$C

In this paper, fundamental shear-horizontal SH0 mode Leaky Surface Acoustic Wave (LSAW) resonators on X-cut lithium niobate leveraging dense and robust electrodes such as gold and tungsten are demonstrated for extreme temperature operation in harsh environments. A novel post-processing approach based on in-band spurious mode tracking is introduced to enable reliable characterization under extreme parasitic loading during testing. Devices exhibit stable performance throughout multiple thermal cycles up to 1000 $^\circ$C, with an extrapolated electromechanical coupling coefficient kt2 = 25% and loaded quality factor Qp = 12 at 1000 $^\circ$C for tungsten devices, and kt2 = 17%, Qp = 100 at 900 $^\circ$C for gold devices.

physics.app-ph↗

arXiv2025

Strongly dispersive dielectric properties of high-ScN-fraction ScAlN deposited by molecular beam epitaxy

We present a comprehensive study of dielectric properties including complex permittivity, loss, and leakage of high-ScN-fraction ScAlN thin films grown using molecular beam epitaxy (MBE). Dielectric spectroscopy is carried out on high-ScN-fraction (30%-40% ScN fraction) samples from 20 Hz to 10 GHz. We find that real permittivity {\epsilon}' increases significantly with increasing ScN fraction; a trend confirmed by density functional theory. Further, {\epsilon}' is strongly dispersive with frequency and increasing ScN fraction, with values for Sc0.4Al0.6N varying from 150 down to 60 with increasing frequency. Loss, dispersion, and DC leakage current correspondingly increase with ScN fraction. The high {\epsilon}' and strongly dispersive behavior in MBE ScAlN are not observed in a sputter-deposited ScAlN control with a similar ScN fraction, highlighting fundamental differences between films produced by the two deposition methods. Microscopy and spectroscopy analyses are carried out on MBE- and sputter-deposited samples to compare microstructure, alloy, and dopant concentration.

cond-mat.mtrl-sci↗

arXiv2024

Training Multi-Layer Binary Neural Networks With Local Binary Error Signals

Binary Neural Networks (BNNs) significantly reduce computational complexity and memory usage in machine and deep learning by representing weights and activations with just one bit. However, most existing training algorithms for BNNs rely on quantization-aware floating-point Stochastic Gradient Descent (SGD), limiting the full exploitation of binary operations to the inference phase only. In this work, we propose, for the first time, a fully binary and gradient-free training algorithm for multi-layer BNNs, eliminating the need for back-propagated floating-point gradients. Specifically, the proposed algorithm relies on local binary error signals and binary weight updates, employing integer-valued hidden weights that serve as a synaptic metaplasticity mechanism, thereby enhancing its neurobiological plausibility. Our proposed solution enables the training of binary multi-layer perceptrons by using exclusively XNOR, Popcount, and increment/decrement operations. Experimental results on multi-class classification benchmarks show test accuracy improvements of up to +35.47% over the only existing fully binary single-layer state-of-the-art solution. Compared to full-precision SGD, our solution improves test accuracy by up to +35.30% under the same total memory demand, while also reducing computational cost by two to three orders of magnitude in terms of the total number of Boolean gates. The proposed algorithm is made available to the scientific community as a public repository.

cs.LG↗

arXiv2024

TIFeD: a Tiny Integer-based Federated learning algorithm with Direct feedback alignment

Training machine and deep learning models directly on extremely resource-constrained devices is the next challenge in the field of tiny machine learning. The related literature in this field is very limited, since most of the solutions focus only on on-device inference or model adaptation through online learning, leaving the training to be carried out on external Cloud services. An interesting technological perspective is to exploit Federated Learning (FL), which allows multiple devices to collaboratively train a shared model in a distributed way. However, the main drawback of state-of-the-art FL algorithms is that they are not suitable for running on tiny devices. For the first time in the literature, in this paper we introduce TIFeD, a Tiny Integer-based Federated learning algorithm with Direct Feedback Alignment (DFA) entirely implemented by using an integer-only arithmetic and being specifically designed to operate on devices with limited resources in terms of memory, computation and energy. Besides the traditional full-network operating modality, in which each device of the FL setting trains the entire neural network on its own local data, we propose an innovative single-layer TIFeD implementation, which enables each device to train only a portion of the neural network model and opens the door to a new way of distributing the learning procedure across multiple devices. The experimental results show the feasibility and effectiveness of the proposed solution. The proposed TIFeD algorithm, with its full-network and single-layer implementations, is made available to the scientific community as a public repository.

cs.LG↗

arXiv2024

ScAlN-on-SiC Ku-Band Solidly-Mounted Bidimensional Mode Resonators

This letter reports on Solidly-Mounted Bidimensional Mode Resonators (S2MRs) exploiting a highly-optimized Sezawa mode in 30% Scandium-doped Aluminum Nitride (ScAlN) on Silicon Carbide (SiC) and operating near 16 GHz. Experimental results demonstrate mechanical quality factors (Qm) as high as 380, Bode quality factors (QBode) approaching 500, electromechanical coupling coefficients (kt2) of 4.5%, an overall Figure of Merit (FOM = Qm kt2) exceeding 17, and power handling greater than 20 dBm for devices closely matched to 50 ohms. To the best of the authors' knowledge, S2MRs exhibit the highest Key Performance Indicators (KPIs) among solidly mounted resonators in the Ku band, paving the way for the integration of nanoacoustic devices on fast substrates with high-power electronics, tailored for military and harsh-environment applications.

eess.SY↗

arXiv2024

NITRO-D: Native Integer-only Training of Deep Convolutional Neural Networks

Quantization is a pivotal technique for managing the growing computational and memory demands of Deep Neural Networks (DNNs). By reducing the number of bits used to represent weights and activations (typically from 32-bit Floating-Point (FP) to 16-bit or 8-bit integers), quantization reduces memory footprint, energy consumption, and execution time of DNNs. However, most existing methods typically target DNN inference, while training still relies on FP operations, limiting applicability in environments where FP arithmetic is unavailable. To date, only one prior work has addressed integer-only training, and only for Multi-Layer Perceptron (MLP) architectures. This paper introduces NITRO-D, a novel framework for training deep integer-only Convolutional Neural Networks (CNNs) that operate entirely in the integer domain for both training and inference. NITRO-D enables training of integer CNNs without requiring a separate quantization scheme. Specifically, it introduces a novel architecture that integrates multiple local-loss blocks, which include the proposed NITRO-Scaling layer and NITRO-ReLU activation function. The proposed framework also features a novel learning algorithm that employs local error signals and leverages IntegerSGD, an optimizer specifically designed for integer computations. NITRO-D is implemented as an open-source Python library. Extensive evaluations on state-of-the-art image recognition datasets demonstrate its effectiveness. For integer-only MLPs, NITRO-D improves test accuracy by up to +5.96% over the state-of-the-art. It also successfully trains integer-only CNNs, reducing memory requirements and energy consumption by up to 76.14% and 32.42%, respectively, compared to the traditional FP backpropagation algorithm.

cs.LG↗

arXiv2024

Characterization of Acoustic Losses in Interdigitated VHF to mmWave Piezoelectric M/NEMS Resonators

This work reports on a technology-agnostic and frequency-independent methodology combining a-priori modeling, Finite Element Analysis (FEA), and experimental results for the characterization of acoustic losses in interdigitated piezoelectric micro- and nano-electromechanical (M/NEMS) resonators. The proposed approach models the mechanical quality factor (Qm) and its dependency on piezoelectric (Qpiezo) and metal (Qmetal) acoustic losses, as a function of the mode of vibration dispersion characteristics. The model is finally experimentally validated by exploiting the intrinsic on-chip multifrequency manufacturability of interdigitated devices. A broad range of available resonator technologies, frequencies, and piezoelectric materials are investigated for this purpose, including bulk X-cut Lithium Niobate (XLN) leaky surface acoustic wave resonators operating at Ultra High Frequency (UHF), thin film XLN Lamb Wave resonators spanning between Very High Frequency (VHF) and the Ku band, and Aluminum Nitride (AlN) and scandium-doped AlN (ScAlN) cross-sectional lame' mode resonators ranging from the Ku to Ka band (mmWave).

eess.SY↗

arXiv2024

2-16 GHz Multifrequency X-Cut Lithium Niobate NEMS Resonators on a Single Chip

This work presents the design, fabrication, and testing of X-Cut Lithium Niobate (LN) acoustic nanoelectromechanical (NEMS) Laterally Vibrating Resonators (LVRs) and Degenerate LVRs (d-LVRs) operating in the S0 (YZ30) and SH0 (YZ-10) modes between 2 to 16 GHz range, monolithically fabricated on a single chip. The NEMS topology is optimized to extend the aforementioned fundamental modes in the C-, X-, and Ku-bands while preserving performance and mass manufacturability. The devices present acoustic wavelengths ({\lambda}) varying between 1800 and 400 nm and are fabricated on a 100 nm ultra-thin LN film on high resistivity silicon with a 3-mask process. Experimental results highlighted quality factor at resonance (Qs) and mechanical quality factors (Qm) as high as 477 and 1750, respectively, and electromechanical coupling (kt2) as high as 32.7%. Large kt2 (>10%) are recorded over a broad range of frequencies (2 - 8 GHz), while Qm exceeding 100 are measured up to 15 GHz. Further enhancement to performance and range of operation on the same chip can be achieved by decreasing {\lambda}, refining the fabrication process, and optimizing device topology. These additional steps can help pave the way for manufacturing high-performance resonators on a single chip covering the entire 1 - 25 GHz spectrum.

eess.SY↗

arXiv2024

Scandium Aluminum Nitride Overmoded Bulk Acoustic Resonators for Future Wireless Communication

This work reports on the modeling, fabrication, and experimental characterization of a 13 GHz 30% Scandium-doped Aluminum Nitride (ScAlN) Overmoded Bulk Acoustic Resonator (OBAR) for high-frequency Radio Frequency (RF) applications, notably in 5G technology and beyond. The Finite Element Analysis (FEA) optimization process targets the top and bottom metal electrode thicknesses, balancing the electromechanical coupling coefficient and acoustic energy distribution to enhance device Figure of Merit (FOM). Experimental results on fabricated devices employing platinum and aluminum as bottom and top electrode, respectively, demonstrate a quality factor at resonance (Qs) of 210 and a coupling coefficient (kt2) of 5.2% at 13.3 GHz for the second bulk thickness overtone, effectively validating the simulation framework and hinting at the possible implementation of OBARs for advanced RF filters in 5G networks.

eess.SY↗

arXiv2023

Parametric Frequency Divider based Ising Machines

We report on a new class of Ising Machines (IMs) that rely on coupled parametric frequency dividers (PFDs) as macroscopic artificial spins. Unlike the IM counterparts based on subharmonic injection locking (SHIL), PFD IMs do not require strong injected continuous wave signals or applied DC voltages. Therefore, they show a significantly lower power consumption per spin compared to SHIL based IMs, making it feasible to accurately solve large scale combinatorial optimization problems (COPs) that are hard or even impossible to solve by using the current von Neumann computing architectures. Furthermore, using high quality (Q) factor resonators in the PFD design makes PFD IMs able to exhibit a nanoWatt level power per spin. Also, it remarkably allows a speed up of the phase synchronization among the PFDs, resulting in shorter time to solution and lower energy to solution despite the resonators' longer relaxation time. As a proof of concept, a 4 node PFD IM has been demonstrated. This IM correctly solves a set of MaxCut problems while consuming just 600 nanoWatts per spin. This power consumption is two orders of magnitude lower than the power per spin of state of the art SHIL based IMs operating at the same frequency.

physics.app-ph↗