arXiv subjects

Luca Brandt

Publications and source records attributed to Luca Brandt.

At least 19 recordsLinked to original sources

arXiv2026

Interface-resolved simulations of boiling heat transfer

Boiling heat transfer underpins many applications where large heat fluxes must be dissipated. Boiling is characterized by a wide range of coupled multiscale transport phenomena, making its accurate numerical prediction a long-standing challenge. In this context, interface-resolved simulation approaches - where the liquid-vapor interface is either explicitly or implicitly described - have undergone significant advancements, driven by improved numerical formulations, more complete thermodynamic and compressibility modeling, and the growing availability of computational resources. Here, we provide a comprehensive overview of the state of the art in interface-resolved simulations of boiling flows. We examine the different formulations governing the flow and temperature field, strategies for coupling heat and mass transfer at the interface, and current modeling approaches for small-scale physics such as nucleation, microlayer evaporation, and contact-line dynamics. By analyzing insights from recent high-fidelity simulations, a central observation is that interface-resolved simulations of boiling are hydrodynamically resolved but microscopically modeled: their predictive accuracy depends on the sub-grid closures for nucleation, microlayer, and contact-line physics no less than on the fidelity of the hydrodynamic solver. We discuss the strengths and limitations of available methods on this basis, together with the open challenges in the accurate description of boiling heat transfer.

physics.flu-dyn↗

arXiv2026

Elastic pseudoturbulence induced by low-Galilei settling spheres

In this Letter, we show how a suspension of light solid spheres settling through a polymer solution results in a chaotic and highly-intermittent state. By leveraging particle-resolved direct numerical simulations, we investigate the effect of increasing polymer relaxation time and Deborah number $De$ on viscoelastic sedimentation at a low density ratio $ρ_s/ρ_f=5$ and a low Galilei number $Ga=3.16$. Even at moderate $De$, the spheres form gravity-aligned clusters and settle faster, while the polymer stresses energize the large scales of motion. The onset of elastic turbulence and intermittency is signaled by a $-4$ spectral scaling in the high-wavenumber range and by nonlinear high-order exponents of the velocity structure functions. These results indicate that viscoelastic effects induce pseudoturbulence in the presence of viscous-dominated sedimentation.

physics.flu-dyn↗

arXiv2026

Marangoni modulation of coupled Rayleigh-Taylor and Faraday instabilities in vertically oscillated liquid films

We investigate the Marangoni modulation of coupled Rayleigh-Taylor and Faraday instabilities in a vertically oscillated Newtonian liquid film carrying insoluble surfactants. Linear stability analysis using Floquet theory reveals that an increasing Marangoni number (Ma) selectively suppresses subharmonic modes, driving the system into a harmonic-dominated regime. The interfacial response is found to be highly frequency-dependent. At low forcing frequencies, increasing Ma causes adjacent harmonic tongues to merge into a novel surfactant mode that migrates towards long wavelengths, ultimately coalescing with the RTI branch and fragmenting the dynamically stable window. Conversely, at high frequencies, surfactants monotonically elevate the harmonic instability threshold, significantly widening the stable parameter space. To uncover the underlying mechanisms, a long-wave asymptotic analysis is performed, demonstrating that the critical forcing amplitude factorizes into a static capillary-gravity margin and a dynamic elasto-inertial modulation, yielding a scaling law for the critical mode balance. Finally, nonlinear simulations based on a rigorous weighted-residual reduced model are utilized to dissect the spatial work performed by individual forces, which shows that surfactants modulate stability through phase-controlled Marangoni transport. In the RTI regime, increasing Ma reverses the transport direction and drives fluid into the peaks, inducing a transition from stabilization to destabilization. In the Faraday instability (FI) regime, the response exhibits a strong frequency dependence, governed by Marangoni transport that redistributes fluid away from interfacial peaks at high frequencies but toward them at low frequencies, thereby suppressing or enhancing the instability accordingly.

physics.flu-dyn↗

arXiv2025

Transport of spherical microparticles in a 3D vortex flow

Particles are common in biological and environmental flows and are widely used in industrial and pharmaceutical applications. Their motion and flow dynamics are strongly affected by interactions with the surrounding flow structure. While particle-flow interactions have been extensively studied in low Reynolds number (Re) flows as well as in fully developed turbulence, the transport mechanisms of these particles in intermediate flow regimes remain less explored. Here, we investigate the response of neutrally buoyant spherical particles to a single vortex flow field. Using a microfluidic cross-slot geometry, we generate a well-characterized, stationary, three-dimensional streamwise vortex at moderate $\text{Re}$ ($\sim 50$). Our experimental results, supported by numerical simulations, show that with increasing particle diameter, they are progressively excluded from the vortex core. Initially, small particles follow a Burgers vortex-like self-similar motion, but for larger particle diameters, deviations from this trend emerge due to fluid inertia and finite-size effects. These findings enhance our understanding of particle dynamics in vortical flows and have implications for microfluidic applications involving particle sorting and separation.

physics.flu-dyn↗

arXiv2025

Breakdown of Kolmogorov Scaling and Modified Energy Transfer in Bubble-Laden Turbulence

We investigate the effect of a dispersed bubble phase on forced homogeneous and isotropic turbulence using high-resolution high-performance simulations based on the lattice Boltzmann method. While the classical Kolmogorov energy cascade is largely preserved when considering the system as a whole, a phase-specific analysis reveals striking deviations from the classical turbulence scaling. In particular, the gas phase exhibits significant departures from Kolmogorov's predictions, whereas the continuous liquid phase retains a turbulence structure consistent with classical expectations up to 24% in gas volume fractions. These findings suggest that, despite the presence of a dispersed phase, the global energy transfer remains close to a universal behavior. At the same time, phase-specific interactions are shown to introduce modifications to the turbulent dynamics at small scales. In particular, the gas-phase exhibits a nearly flat spectrum at low wave numbers followed by a k^{-3} scaling at intermediate scales pointing to the presence of patterns of localized bursts uniformly distributed between two finite wavelengths.Our results aim at deepening the understanding of multiphase turbulence, particularly in the context of energy transfer mechanisms and phase interactions in bubble-laden flows. This study provides a framework for future investigations into the fundamental properties of multiphase turbulence and its implications for environmental, atmospheric, and industrial flows.

physics.flu-dyn↗

arXiv2025

Evaporation of Finite-Size Ammonia and n-Heptane Droplets in Weakly Compressible Turbulence: An Interface-Resolved DNS Study

This study presents direct numerical simulation (DNS) of finite-size, interface-resolved ammonia and n-heptane droplets evaporating in decaying homogeneous isotropic turbulence. Simulations are conducted for each fuel to model the dynamics in a dense spray region, where the liquid volume fraction exceeds $\mathcal{O}(10^{-2})$. The focus is on investigating the complex interactions between droplets, turbulence, and phase change, with emphasis on droplet-droplet interactions and their influence on the evaporation process. The present study also explores how varying turbulence intensities affect the evaporation rates of each fuel, unveiling the differences in the coalescence and energy transfer from the liquid to the gaseous phase. The results reveal that, when comparing ammonia with n-heptane with equal liquid volume fractions, ammonia exhibits faster initial evaporation due to its higher volatility. However, this rate declines over time as frequent droplet coalescence reduces the total surface area available for evaporation. When numerical experiments are initialized with equal energy content, increasing turbulence intensity enhances the evaporation of n-heptane throughout the simulation, while ammonia evaporation soon becomes less sensitive to turbulence due to rapid vapor saturation. These findings are relevant to improving predictive CFD models and optimizing fuel injection in spray-combustion applications, especially under high-pressure conditions.

physics.flu-dyn↗

arXiv2025

accLB: A High-Performance Lattice Boltzmann Code for Multiphase Turbulence on Multi-Gpu Architectures

In this work, we present accLB, a high-performance Fortran-based lattice Boltzmann (LB) solver tailored to multiphase turbulent flows on multi-GPU architectures. The code couples a conservative phase-field formulation of the Allen-Cahn equation with a thread-safe, regularized LB method to capture complex interface dynamics. Designed from the ground up for HPC environments, accLB employs MPI for distributed memory parallelism and OpenACC for GPU acceleration, achieving excellent portability and scalability on leading pre-exascale systems such as Leonardo and LUMI. Benchmark tests demonstrate strong and weak scaling efficiencies on multiple GPUs. Physical validation includes direct numerical simulations of homogeneous isotropic turbulence (HIT). Further, we examine bubble-laden HIT and observe a transition to a $-3$ energy scaling, as in experiments and theoretical predictions, due to bubble-induced dissipation, along with enhanced small-scale intermittency. These results highlight accLB as a robust and scalable platform for the simulation of multiphase turbulence in extreme computational regimes.

physics.flu-dyn↗

arXiv2025

Rheology of concentrated suspension of fibers with load dependent friction coefficient

We numerically investigate the effects of fiber aspect ratio, roughness, flexibility, and flow inertia on the rheology of concentrated suspensions. We perform direct numerical simulations modeling the fibers, suspended in an incompressible Newtonian fluid, as continuous flexible slender bodies obeying the Euler-Bernoulli beam equation. An immersed Boundary Method (IBM) is employed to solve for the motion of fibers. In concentrated suspensions, fibers come into contact due to the presence of asperities on their surface. We assume a normal load-dependent friction coefficient to model contact dynamics and friction, which successfully recovers the shear-thinning behaviour observed in experiments. First, we report the shear rate dependent behavior and the increase in the suspension viscosity with the increasing volume fraction of fibers, fiber roughness, and rigidity. The increase in the viscosity is stronger at a lower shear rate and finite inertia. Simulation results indicate that for the concentrated suspensions, contact stresses between fibers form the dominant contribution to the viscosity. Moreover, we find the first normal stress difference to be positive and to increase with the Reynolds number for flexible fibers. Lastly, we explore the divergence of viscosity for different aspect ratios and roughness of the fibers and predict the jamming volume fraction by fitting the data to the Maron-Pierce law. The jamming volume fraction decreases with increasing the aspect ratio and roughness. We conclude that the contact forces and interparticle friction become one of the crucial factors governing the rheology of flexible fiber suspensions at high concentrations.

physics.flu-dyn↗

arXiv2025

Orientation instability of settling spheroids in a linearly density stratified fluid

Much work has been done to understand the settling dynamics of spherical particles in a homogeneous and a stratified fluid. However, the effects of shape anisotropy on the settling dynamics of a particle in a stratified fluid are not completely understood. To this end, we perform numerical simulations for settling oblate and prolate spheroids in a stratified fluid. We present the results for the Reynolds number, $Re$, in the range $80-250$ and the Richardson number, $Ri$, in the range $0-10$. We find that both the oblate and prolate spheroids reorient to the edge-wise and partially edge-wise orientations, respectively, as they settle in a stratified fluid completely different from the steady-state broad-side on orientation observed in a homogeneous fluid. We observe that reorientation instabilities emerge when the velocity magnitude of the spheroids fall below a particular threshold. We also report the enhancement of the drag on the particle from stratification. The torque due to buoyancy effects tries to orient the spheroid in an edge-wise orientation while the hydrodynamic torque tries to orient it to a broad-side on orientation. Below the velocity threshold, the buoyancy torque dominates; resulting in the onset of reorientation instability. Finally, the asymmetry in the distribution of the baroclinic vorticity generation term around the spheroids explains the onset of the reorientation instability.

physics.flu-dyn↗

arXiv2025

Thread-safe multiphase lattice Boltzmann model for droplet and bubble dynamics at high density and viscosity contrasts

This study presents a high-order, thread-safe version of the lattice Boltzmann (LBM) method, incorporating an interface-capturing equation, based on the conservative Allen-Cahn equation, to simulate incompressible two-component systems with high-density and viscosity contrasts. The method utilizes a recently proposed thread-safe implementation optimized for shared memory architectures and it is employed to reproduce the dynamics of droplets and bubbles on several test cases with results in agreement with experiments and other numerical simulations from the literature. The proposed approach offers promising opportunities for high-performance computing simulations of realistic fluid systems with high-density and viscosity contrasts for advanced applications in environmental, atmospheric and meteorological flows, all the way down to microfluidic and biological systems, particularly on GPU-based architectures.

physics.flu-dyn↗

arXiv2024

Dense Suspensions in Rotary Shear

We introduce a novel unsteady shear protocol, which we name Rotary Shear (RS), where the flow and vorticity directions are continuously rotated around the velocity gradient direction by imposing two out-of-phase oscillatory shear (OS) in orthogonal directions. We perform numerical simulations of dense suspensions of rigid non-Brownian spherical particles at volume fractions ($ϕ$) between 0.40 and 0.55 subject to this new RS protocol and compare to the classical OS protocol. We find that the suspension viscosity displays a similar non-monotonic response as the strain amplitude ($γ_0$) is increased: a minimum viscosity is found at an intermediate, volume-fraction dependent strain amplitude. However, the suspension dynamics is different in the new protocol. Unlike the OS protocol, suspensions under RS do not show self-adsorbing states at any $γ_0$ and do not undergo the reversible-irreversible transition: the stroboscropic particle dynamics are always diffusive, which we attribute to the fact that the RS protocol is irreversible. To validate this hypothesis, we introduce a reversible-RS (RRS) protocol, a combination of RS and OS, where we rotate the shear direction (as in RS) until it is instantaneously reversed (as in OS), and find the resulting rheology and dynamics to be closer to OS. Detailed microstructure analysis shows that both the OS and RRS protocols result in a contact-free, isotropic to an in-contact, anisotropic microstructure at the dynamically reversible-to-irreversible transition. The RS protocol does not render such a transition, and the dynamics remain diffusive with an in-contact, anisotropic microstructure for all strain amplitudes.

cond-mat.soft↗

arXiv2024

Turbulent pipe flow with spherical particles: drag as a function of particle size and volume fraction

Suspensions of finite-size solid particles in a turbulent pipe flow are found in many industrial and technical flows. Due to the ample parameter space consisting of particle size, concentration, density and Reynolds number, a complete picture of the particle-fluid interaction is still lacking. Pressure drop predictions are often made using viscosity models only considering the bulk solid volume fraction. For the case of turbulent pipe flow laden with neutrally buoyant spherical particles, we investigate the pressure drop and overall drag (friction factor), fluid velocity and particle distribution in the pipe. We use a combination of experimental (MRV) and numerical (DNS) techniques and a continuum flow model. We find that the particle size and the bulk flow rate influence the mean fluid velocity, velocity fluctuations and the particle distribution in the pipe for low flow rates. However, the effects of the added solid particles diminish as the flow rate increases. We created a master curve for drag change compared to single-phase flow for the particle-laden cases. This curve can be used to achieve more accurate friction factor predictions than the traditional modified viscosity approach that does not account for particle size.

physics.flu-dyn↗

arXiv2024

Turbulent convection in emulsions: the Rayleigh-Bénard configuration

This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The Rayleigh, Prandtl, Weber, and Froude numbers are held constant at $10^8$, $4$, $6000$, and $1$, respectively. Initially, when both fluids share the same properties, a 10\% Nusselt number increase is observed at the highest volume fractions. In this case, despite a reduction in turbulent kinetic energy, droplets enhance energy transfer to smaller scales, smaller than those of single-phase flow, promoting local mixing. By varying viscosity ratios, while maintaining a constant Rayleigh number based on the average mixture properties, the global heat transfer rises by approximately 25\% at $\Upphi=0.2$ and $λ_μ=10$. This is attributed to increased small-scale mixing and turbulence in the less viscous carrier phase. In addition, a dispersed phase with higher thermal diffusivity results in a 50\% reduction in the Nusselt number compared to the single-phase counterpart, owing to faster heat conduction and reduced droplet presence near walls. The study also addresses droplet-size distributions, confirming two distinct ranges dominated by coalescence and breakup with different scaling laws.

physics.flu-dyn↗

arXiv2024

Interface-resolved simulations of small inertial particles in turbulent channel flow

We present a direct comparison between interface-resolved and one-way-coupled point-particle direct numerical simulations (DNS) of gravity-free turbulent channel flow laden with small inertial particles, with high particle-to-fluid density ratio and diameter of about $3$ viscous units. The most dilute flow considered, solid volume fraction $O(10^{-5})$, shows the particle feedback on the flow to be negligible, whereas differences with respect to the unladen case, noteworthy a drag increase of about $10\%$, are found for a volume fraction $O(10^{-4})$. This is attributed to a dense layer of particles at the wall, caused by turbophoresis, flowing with large particle-to-fluid apparent slip velocity. The most dilute case is therefore taken as the benchmark for assessing the validity of a widely used point-particle model, where the particle dynamics results only from inertial and nonlinear drag forces. In the bulk of the channel, the first- and second-order moments of the particle velocity from the point-particle DNS agree well with those from the interface-resolved DNS. Close to the wall, however, most of the statistics show major qualitative differences. We show that this difference originates from the strong shear-induced lift force acting on the particles in the near-wall region. This mechanism is well captured by the lift force model due to Saffman (J. Fluid Mech., vol. 22 (2), 1965, pp. 385--400), while other widely used, more elaborate, approaches aiming at extending the lift model for a wider range of particle Reynolds numbers can actually underpredict the magnitude of the near-wall particle velocity fluctuations for the cases analysed here.

physics.flu-dyn↗

arXiv2024

The role of wetting on the flow of two immiscible fluids in porous media

We study the role of the capillary number, $Ca$ and of the surface wettability on the dynamics of the interface between an invading and a defending phase in a porous medium by means of numerical simulations. We employ a hybrid phase field-immersed boundary approach to successfully model the contact line dynamics over the solid objects. Using a phase-field method which naturally incorporates dynamic wetting we eliminate the need for empirical contact line models to address contact line singularity. We map the two dominant modes governing the motion of the interface, namely, capillary fingering, and stable penetration, in the ($Ca$-$θ$) plane, with $θ$ the static contact angle prescribed at the solid pores. Capillary fingering dominates at lower values of $Ca$ and pores hydrophobic to the invading phase, while a stable penetration is observed on hydrophillic surfaces. We present new measurements and analyses, including curvature probability density functions (pdf) and average curvature. We also show that the pressure needed for the invading phase to advance at constant flow rate decreases with the capillary number, and increases with the contact angle at the capillary numbers considered. The latter is due to a significant increase of the length of the interface in the case of capillary fingering. Finally, we show that it is possible to identify the different interfacial modes by measuring the penetration length and velocity during the medium filling.

physics.flu-dyn↗

arXiv2024

Viscoelasticity of suspension of red blood cells under oscillatory shear flow

We present a numerical analysis of the rheology of a suspension of red blood cells (RBCs) for different volume fractions in a wall-bounded, effectively inertialess, small amplitude oscillatory shear (SAOS) flow for a wide range of applied frequencies. The RBCs are modeled as biconcave capsules, whose membrane is an isotropic and hyperelastic material following the Skalak constitutive law. The frequency-dependent viscoelasticity in the bulk suspension is quantified by the complex viscosity, defined by the amplitude of the particle shear stress and the phase difference between the stress and shear. SAOS flow basically impedes the deformation of individual RBCs as well as the magnitude of fluid-membrane interactions, resulting in a lower specific viscosity and first and second normal stress differences than in steady shear flow. Although it is known that the RBC deformation alone is sufficient to give rise to shear-thinning, our results show that the complex viscosity weakly depends on the frequency-modulated deformations or orientations of individual RBCs, but rather depends on combinations of the frequency-dependent amplitude and phase difference. The effect of the viscosity ratio between the cytoplasm and plasma and of the capillary number are also assessed.

physics.flu-dyn↗

arXiv2024

How small droplets form in turbulent multiphase flows

The formation of small droplets and bubbles in turbulent flows is a crucial process in geophysics and engineering, whose underlying physical mechanism remains a puzzle. In this letter, we address this problem by means of high-resolution numerical simulations, comparing a realistic multiphase configuration with a numerical experiment in which we attenuate the presence of strong velocity gradients either across the whole mixture or in the disperse phase only. Our results show unambiguously that the formation of small droplets is governed by the internal dynamics which occur during the break-up of large drops and that the high vorticity and the extreme dissipation associated to these events are the consequence and not the cause of the breakup.

physics.flu-dyn↗

arXiv2023

Experimental and numerical investigation of bubble migration in shear flow: deformability-driven chaining and repulsion

We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we notice that, for all fluids, the interaction type depends on the relative position of the bubbles. If they are aligned in the vorticity direction, they repel, if not, they attract each other. The simulations show a similar behavior in Newtonian fluids as in viscoelastic and elastoviscoplastic fluids, as long as the capillary number is sufficiently large. This shows that the interaction-related migration of the bubbles is strongly affected by the bubble deformation. We suggest that the cause of migration is the interaction between the heterogeneous pressure fields around the deformed bubbles, due to capillary pressure.

cond-mat.soft↗