arXiv subjects

Longhui Li

Publications and source records attributed to Longhui Li.

13 recordsLinked to original sources

arXiv2026

Some constructions of restricted Kakeya sets

In this paper, we consider Kakeya sets with the additional restriction that centers of the unit line segments belong to a given set. In particular, for every uncountable Borel set $A\subset\mathbb{R}^d$, $d\geq 2$, we construct a compact subset of $\mathbb{R}^d$ of Lebesgue measure zero that contains, in every direction, a unit line segment whose center lies in $A$. Notice that every such Kakeya set (not even necessarily compact) must have positive Lebesgue measure if $A$ is countable. So our result shows that the countability is in fact the only obstruction.

math.CA↗

arXiv2026

Lightweight Soft X-ray Imager (LSXI) with glass-based coded mask

The coded mask technique has been widely used in X-ray and Gamma-ray imagers, especially in space astronomy. However, the traditional design of coded mask imagers usually has problems with large size and heavy weight. Here, we propose a novel design for a coded mask imager made of glass based on microchannel plate (MCP) technology, making it lightweight (within 1 kg), compact, and self-supporting, which is very suitable for space exploration satellites. The design is initially demonstrated by reconstructing encoded patterns from measurements at the X-ray beamline. Monte Carlo simulations of the module integrated into a 6U CubeSat are conducted to assess its in-orbit detector performance, including sensitivity and source localization.

astro-ph.IM↗

arXiv2026

In-flight calibration of the Wide-field X-ray Telescope on board the Einstein Probe

By utilizing novel lobster-eye optics, the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite achieves an unprecedented combination of a large instantaneous field-of-view (FoV) and high sensitivity for monitoring the dynamic X-ray sky. In this paper, we present the in-orbit calibration results of the WXT during its first two and a half years of operations. By conducting observations of standard celestial sources--including the Crab Nebula, Scorpius X-1, and Cassiopeia A--we systematically characterized key instrumental properties. Our analysis demonstrates that the in-orbit performance of the WXT agrees with prelaunch ground calibrations well. The spatial resolution, denoted by the full width at half maximum (FWHM) of the focal spot, typically ranges from $3'$ to $6'$ across $\sim$90% of the FoV, with a median of $\sim 4.3'$. The post-calibration source positioning accuracy achieves $1.3'$ (at the 90% confidence level). The in-orbit effective area is consistent with model predictions and ground measurements, exhibiting an overall systematic uncertainty of $\lesssim 10\%$ (90% C.L.) in the 0.5-4 keV band. While the vast majority of the detectors remain highly stable, a noticeable long-term degradation at the low-energy end ($\sim30\%$-$40\%$, 0.4-0.6 keV) is observed in a few specific modules. Furthermore, spectral evaluations using Cas A confirm the stability of the energy scale and spectral resolution of the focal-plane Complementary Metal-Oxide Semiconductor (CMOS) detectors. All derived calibration products have been incorporated into the WXT calibration database (CALDB). These results comprehensively verify the instrumental capabilities of the WXT, providing a solid foundation for the reliable analysis of scientific observations.

astro-ph.IM↗

arXiv2026

On unions of geodesics and projections of invariant sets

Let $M$ be a $d$-dimensional complete Riemannian manifold and let $\pi: SM \to M$ denote the canonical projection from the unit tangent bundle. We prove that if $E \subset SM$ is a set that invariant under the geodesic flow with Hausdorff dimension $\dim_{\mathcal{H}} E \ge 2(k-1)+1 +\beta$ for some integer $1 \le k \le d-1$ and some $\beta \in [0,1]$, then the projection $\pi(E)$ satisfies $\dim_{\mathcal{H}} \pi(E) \ge k + \beta$. In other words, this yields a lower bound on the Hausdorff dimension of unions of geodesics in $M$. Our theorem extends a result of J. Zahl concerning unions of lines in $\mathbb{R}^d$. The proof relies on the transversal property of geodesics, an appropriate $(k+1)$-linear curved Kakeya estimate, and the Bourgain-Guth argument.

math.CA↗

arXiv2025

In-flight calibration of the Lobster Eye Imager for Astronomy

The Lobster Eye Imager for Astronomy (LEIA), as a pathfinder of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe (EP) satellite, is the first lobster-eye focusing X-ray telescope with a considerably large field-of-view (FoV) ever flown. During the two and half years of operations, a series of calibration observations were performed, to fully characterize its performance and calibrate the instrumental properties. In this paper, we present the results of the in-flight calibration campaign of LEIA, focusing on the properties of the PSF, source positional accuracy, effective area, energy response and the instrumental background. The calibration sources used are the Crab nebula, Sco X-1 and Cassiopeia A supernova remnant. Specifically, it is found that the spatial resolution remains almost unchanged compared to the pre-launch values, ranging from 3.6'-9.3' with a median of 5.9'. The post-calibration source positional accuracy is found to be ~2' (at the 90% C.L.). The Crab spectra can be well reproduced by the absorbed power-law model with the best-fit parameters in large agreement with the literature values, indicating that the in-orbit effective area is overall consistent with the model predictions and ground measurements. The effective area exhibits a systematic of $\lesssim10\%$ (at the 68% C.L.), and a mild deterioration of ~15% at the lower energy end after one year of operation. The Cas A spectral analysis shows that the energy scale and spectral resolution of the detectors are generally consistent with ground values. The instrumental background is found to be largely consistent among the four detectors, with strong modulations by the geomagnetic activity and the spectrum qualitatively consistent with our previous simulations. These instrumental performances well meet the design requirements. This work paves the way for the in-orbit calibration of the EP-WXT.

astro-ph.IM↗

arXiv2025

Fourier Frames on Salem Measures

For every $0<s\leq 1$ we construct $s$-dimensional Salem measures in the unit interval that do not admit any Fourier frame. Our examples are generic for each $s$, including all existing types of Salem measures in the literature: random Cantor sets (convolutions, non-convolutions), random images, and deterministic constructions on Diophantine approximations. They even appear almost surely as Brownian images. We also develop different approaches to prove the nonexistence of Fourier frames on different constructions. Both the criteria and ideas behind the constructions are expected to work in higher dimensions. On the other hand, we observe that a weighted arc in the plane can be a $1$-dimensional Salem measure with orthonormal basis of exponentials. This leaves whether there exist Salem measures in the real line with Fourier frames or even orthonormal basis of exponentials a subtle problem.

math.CA↗

arXiv2025

Ground Calibration Result of the Wide-field X-ray Telescope (WXT) onboard the Einstein Probe

We report on results of the on-ground X-ray calibration of the Wide-field X-ray Telescope (WXT) built from novel lobster-eye micro-pore optics, onboard the Einstein Probe (EP) satellite. To fully characterize the instrumental performance and properties, a series of tests and calibrations have been carried out at different levels of devices, assemblies and the complete module before the launch of EP. In this paper, we present the calibration results of three flight model modules (FM1, FM5 and FM11) obtained during their end-to-end module calibration experiments carried out at the 100-m X-ray Test Facility (100XF) of IHEP, CAS. Measurements of the Point Spread Function (PSF), effective area, and energy response were performed for multiple incident directions and several characteristic X-ray emission line energies. Specifically, the distributions of the PSF and effective areas are found to be roughly uniform across the FoV, in large agreement with the prediction of lobster-eye optics. Their energy dependence behavior aligns well with theoretical predictions and Monte Carlo simulations. At 1.25 keV, the full width at half maximum (FWHM) of the focal spot is in range of 3-7 arcmin (a median of 4.2) and the effective area in range of 2-3 $cm^2$. Noticeably, the flight model instruments demonstrate a $\sim1.5$ arcmin spatial resolution improvement over the previously launched Lobster Eye Imager for Astronomy. The properties of the complementary metal-oxide semiconductor (CMOS) sensors were also calibrated. The gain coefficients are in range of 6.4-6.9 eV/DN. The energy resolutions are in range of 120-140 eV at 1.25 keV, meeting design requirements. These calibration results have been ingested into the first version of calibration database (CALDB) and applied to the analysis of the scientific data acquired by WXT after the launch of EP.

astro-ph.IM↗

arXiv2024

Einstein Probe discovery of EP240408a: a peculiar X-ray transient with an intermediate timescale

We report the discovery of a peculiar X-ray transient, EP240408a, by Einstein Probe (EP) and follow-up studies made with EP, Swift, NICER, GROND, ATCA and other ground-based multi-wavelength telescopes. The new transient was first detected with Wide-field X-ray Telescope (WXT) on board EP on April 8th, 2024, manifested in an intense yet brief X-ray flare lasting for 12 seconds. The flare reached a peak flux of 3.9x10^(-9) erg/cm2/s in 0.5-4 keV, about 300 times brighter than the underlying X-ray emission detected throughout the observation. Rapid and more precise follow-up observations by EP/FXT, Swift and NICER confirmed the finding of this new transient. Its X-ray spectrum is non-thermal in 0.5-10 keV, with a power-law photon index varying within 1.8-2.5. The X-ray light curve shows a plateau lasting for about 4 days, followed by a steep decay till becoming undetectable about 10 days after the initial detection. Based on its temporal property and constraints from previous EP observations, an unusual timescale in the range of 7-23 days is found for EP240408a, which is intermediate between the commonly found fast and long-term transients. No counterparts have been found in optical and near-infrared, with the earliest observation at 17 hours after the initial X-ray detection, suggestive of intrinsically weak emission in these bands. We demonstrate that the remarkable properties of EP240408a are inconsistent with any of the transient types known so far, by comparison with, in particular, jetted tidal disruption events, gamma-ray bursts, X-ray binaries and fast blue optical transients. The nature of EP240408a thus remains an enigma. We suggest that EP240408a may represent a new type of transients with intermediate timescales of the order of about 10 days. The detection and follow-ups of more of such objects are essential for revealing their origin.

astro-ph.HE↗

arXiv2024

Dimension of Diophantine approximation and some applications in harmonic analysis

In this paper we construct a new family of sets based on Diophantine approximation in the Euclidean space, and consider their applications in several problems in harmonic analysis. Our first application is on the Hausdorff dimension of our sets. We show a recent result of Ren and Wang on the ABC sum-product problem is sharp. Higher dimensional cases and the relation to orthogonal projections are also discussed. Some conjectures are proposed. In addition to Hausdorff dimension, we also consider Fourier dimension. For every $0\leq t\leq s\leq 1$, we are able to construct a subset of $\mathbb{R}$ that has Hausdorff dimension $s$ and Fourier dimension $t$, together with a measure $\mu$ that captures both dimensions, i.e., $$\mu(B(x,r))\lesssim_\epsilon r^{s-\epsilon} \ \text{and} \ |\hat{\mu}(\xi)|\lesssim_\epsilon |\xi|^{-t/2 +\epsilon}, \ \forall\,\epsilon>0.$$ It is fundamental but the very first such result in the literature. Our last result is to provide a viewpoint of the sharpness of Fourier restriction over general measures from dimensions of sets and measures.

math.CA↗

arXiv2024

Orthogonal projection, dual Furstenberg problem, and discretized sum-product

In this paper we come up with a dual version of the Furstenberg problem and obtain partial results via $L^p$ estimates of orthogonal projections. Examples are also discussed. Moreover, compared with general sets, we find that special structure like Cartesian product has better $L^p$-behavior. This leads to improvement on some discretized sum-product estimates.

math.CA↗

arXiv2022

Spectral2Spectral: Image-spectral Similarity Assisted Spectral CT Deep Reconstruction without Reference

Spectral computed tomography based on a photon-counting detector (PCD) attracts more and more attentions since it has the capability to provide more accurate identification and quantitative analysis for biomedical materials. The limited number of photons within narrow energy bins leads to imaging results of low signal-noise ratio. The existing supervised deep reconstruction networks for CT reconstruction are difficult to address these challenges because it is usually impossible to acquire noise-free clinical images with clear structures as references. In this paper, we propose an iterative deep reconstruction network to synergize unsupervised method and data priors into a unified framework, named as Spectral2Spectral. Our Spectral2Spectral employs an unsupervised deep training strategy to obtain high-quality images from noisy data in an end-to-end fashion. The structural similarity prior within image-spectral domain is refined as a regularization term to further constrain the network training. The weights of neural network are automatically updated to capture image features and structures within the iterative process. Three large-scale preclinical datasets experiments demonstrate that the Spectral2spectral reconstructs better image quality than other the state-of-the-art methods.

eess.IV↗

arXiv2022

Decoupled measurement and modeling of interface reaction kinetics of ion-intercalation battery electrodes

Ultrahigh rate performance of active particles used in lithium-ion battery electrodes has been revealed by single-particle measurements, which indicates a huge potential for developing high-power batteries. However, the charging/discharging behaviors of single particles at ultrahigh C-rates can no longer be described by the traditional electrochemical kinetics in such ion-intercalation active materials. In the meantime, regular kinetic measuring methods meet a challenge due to the coupling of interface reaction and solid-state diffusion processes of active particles. Here, we decouple the reaction and diffusion kinetics via time-resolved potential measurements with an interval of 1 ms, revealing that the classical Butler-Volmer equation deviates from the actual relation between current density, overpotential, and Li+ concentration. An interface ion-intercalation model is developed which considers the excess driving force of Li+ (de)intercalation in the charge transfer reaction for ion-intercalation materials. Simulations demonstrate that the proposed model enables accurate prediction of charging/discharging at both single-particle and electrode scales for various active materials. The kinetic limitation processes from single particles to composite electrodes are systematically revealed, promoting rational designs of high-power batteries.

physics.chem-ph↗

arXiv2022

Overpotential decomposition enabled decoupling of complex kinetic processes in battery electrodes

Identifying overpotential components of electrochemical systems enables quantitative analysis of polarization contributions of kinetic processes under practical operating conditions. However, the inherently coupled kinetic processes lead to an enormous challenge in measuring individual overpotentials, particularly in composite electrodes of lithium-ion batteries. Herein, the full decomposition of electrode overpotential is realized by the collaboration of single-layer structured particle electrode (SLPE) constructions and time-resolved potential measurements, explicitly revealing the evolution of kinetic processes. Perfect prediction of the discharging profiles is achieved via potential measurements on SLPEs, even in extreme polarization conditions. By decoupling overpotentials in different electrode/cell structures and material systems, the dominant limiting processes of battery rate performance are uncovered, based on which the optimization of electrochemical kinetics can be conducted. Our study not only shades light on decoupling complex kinetics in electrochemical systems, but also provides vitally significant guidance for the rational design of high-performance batteries.

physics.chem-ph↗