arXiv subjects

Lisa Randolph

Publications and source records attributed to Lisa Randolph.

At least 19 recordsLinked to original sources

arXiv2026

A New Bound on Light-by-Light Scattering in the Low-Energy Regime

The superposition principle at the heart of optics states that electromagnetic fields do not interact in vacuum. This principle is not universal, instead electromagnetic fields couple weakly via quantum vacuum fluctuations. Striking consequences are light-by-light scattering and vacuum birefringence. Experimental results from colliding X-ray free-electron and optical high-intensity lasers combined with dark-field detection and polarimetry for background suppression are reported. This approach yields the most stringent bound for light-by-light scattering in the low-energy regime achieved to date -- improving upon previous experimental limits by ten orders of magnitude -- and paves the way for precision measurements.

hep-ex↗

arXiv2026

Imaging ablator-fuel mix of hot spot in inertial confinement fusion via resonant X-ray absorption using an X-ray free electron laser

A novel diagnostic is proposed for active probing of doped inertial confinement fusion (ICF) spherical shells, enabling direct measurements of mix and burn dynamics at next-generation implosion facilities via resonant absorption imaging with an X-ray free-electron laser (XFEL). The charge-state-sensitive imaging of embedded dopants provides spatiotemporally resolved constraints on ionization, opacity, and material mix seeded by hydrodynamic instabilities in stagnated plasmas. Proof-of-principle experiments demonstrating resonant XFEL probing of hot spot in coated copper wires driven by an ultra-short relativistic laser pulse, have established the feasibility of this approach. Furthermore, atomic and radiation-hydrodynamic simulations, combined with synthetic resonant X-ray absorption imaging, extend the diagnostic concept to laser-driven direct-drive ICF shells with copper-doped ablators and radiation-driven indirect-drive shells with tungsten-doped ablators. This unique approach, combining a laser-driven implosion facility with a high-brightness XFEL, could enable precise measurements of fusion-relevant hot dense plasmas at multi-keV temperatures, provide stringent benchmarks for radiation-hydrodynamics models, and advance the realization of inertial fusion energy.

physics.plasm-ph↗

arXiv2026

Probing laser-driven surface and subsurface dynamics via grazing-incidence XFEL scattering and diffraction

We demonstrate a grazing-incidence x-ray platform that simultaneously records time-resolved grazing-incidence small-angle x-ray scattering (GISAXS) and grazing-incidence x-ray diffraction (GID) from a femtosecond laser-irradiated gold film above the melting threshold, with picosecond resolution at an x-ray free-electron laser (XFEL). By tuning the x-ray incidence angle, the probe depth is set to tens of nanometers, enabling depth-selective sensitivity to near-surface dynamics. GISAXS resolves ultrafast changes in surface nanomorphology (correlation length, roughness), while GID quantifies subsurface lattice compression, grain orientation, melting, and recrystallization. The approach overcomes photon-flux limitations of synchrotron grazing-incidence geometries and provides stringent, time-resolved benchmarks for complex theoretical models of ultrafast laser-matter interaction and warm dense matter. Looking ahead, the same depth-selective methodology is well suited to inertial confinement fusion (ICF): it can visualize buried-interface perturbations and interfacial thermal resistance on micron to sub-micron scales that affect instability seeding and burn propagation.

physics.optics↗

arXiv2026

Probing ultrafast heating and ionization dynamics in solid density plasmas with time-resolved resonant X-ray absorption and emission

Heating and ionization are among the most fundamental processes in relativistic laser--solid interactions; however, their spatiotemporal evolution remains challenging to capture experimentally. Here we present detailed diagnosis of high-intensity laser interactions with wire targets, leveraging the extreme spectral brightness of an X-ray free-electron laser in sub-picosecond time-resolved resonant X-ray emission spectroscopy and absorption imaging. Experimental results are compared with comprehensive simulations using atomic collisional--radiative models, particle-in-cell, and magnetohydrodynamics codes to elucidate the underlying physics. These multi-scale simulations reveal extreme sensitivity of basic plasma parameters with widely used models, such as temperature and ionization depth, which are able to be constrained by incorporating a detailed accounting of laser spatial profiles, pre-plasma conditions, and collisional processes. These results provide new insights into heating and ionization dynamics in the high-energy-density regime relevant to inertial fusion energy research, both as an experimental platform for accessing theoretically challenging conditions and as a benchmark for improving models of high-power laser--plasma interactions.

physics.plasm-ph↗

arXiv2026

XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.

physics.plasm-ph↗

arXiv2025

Microscopy X-ray Imaging enriched with Small Angle X-ray Scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25-micrometer copper wires with 45-fs, 0.9-J, 800-nm pulses at 3.5e19 W/cm2 while probing with 8.2-keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with about 200-nm resolution, while SAXS quantifies their nanometer-scale sharpness through the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after roughly 18 ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of about 25 km/s and a lateral width of several tens of micrometers, demonstrating for the first time the direct observation of shock formation and decay at solid density with few-nanometer precision. This integrated XRM-SAXS method establishes a quantitative, multiscale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

physics.plasm-ph↗

arXiv2025

High-Quality Ultra-Fast Total Scattering and Pair Distribution Function Data using an X-ray Free Electron Laser

High-quality total scattering data, a key tool for understanding atomic-scale structure in disordered materials, require stable instrumentation and access to high momentum transfers. This is now routine at dedicated synchrotron instrumentation using high-energy X-ray beams, but it is very challenging to measure a total scattering dataset in less than a few microseconds. This limits their effectiveness for capturing structural changes that occur at the much faster timescales of atomic motion. Current X-ray free-electron lasers (XFELs) provide femtosecond-pulsed X-ray beams with maximum energies of approximately 24 keV, giving the potential to measure total scattering and the attendant pair distribution functions (PDFs) on femtosecond timescales. Here, we show that this potential has been realised using the HED scientific instrument at the European XFEL and present normalised total scattering data for 0.35 Å-1 < Q < 16.6 Å-1 and their PDFs from a broad spectrum of materials, including crystalline, nanocrystalline and amorphous solids, liquids, and clusters in solution. We analyse the data using a variety of methods, including Rietveld refinement, small-box PDF refinement, joint reciprocal-real space refinement, cluster refinement, and Debye scattering analysis. The resolution function of the setup is also characterised. We conclusively show that high-quality data can be obtained from a single approximately 30 fs XFEL pulse. Our efforts not only significantly increase the existing maximum reported Q-range for an S(Q) measured at an XFEL but also mean that XFELs are now a viable X-ray source for the broad community of people using reciprocal space total scattering and PDF methods in their research.

cond-mat.mtrl-sci↗

arXiv2025

The Darkfield Approach to Measuring Vacuum Birefringence and Light-by-Light Couplings -- A Proof-of-Principle Experiment

Vacuum fluctuations give rise to effective nonlinear interactions between electromagnetic fields. These generically modify the characteristics of light traversing a strong-field region. X-ray free-electron lasers constitute a particularly promising probe, due to their brilliance, the possibility of precise control and favourable frequency scaling. However, the nonlinear vacuum response is very small even when probing a tightly focused high-intensity laser field with XFEL radiation and direct measurement of light-by-light scattering of real photons and the associated fundamental physics constants of the quantum vacuum has not been possible to date. Achieving a sufficiently good signal-to-background separation is key to a successful quantum vacuum experiment. To master this challenge, a darkfield detection concept has recently been proposed. Here we present the results of a proof-of-principle experiment validating this approach at the High Energy Density scientific instrument of the European X-Ray Free Electron Laser.

hep-ex↗

arXiv2025

Demonstration of full-scale spatio-temporal diagnostics of solid-density plasmas driven by an ultra-short relativistic laser pulse using an X-ray free-electron laser

Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical density and spatio-temporal resolution of conventional diagnostics. Over the last decade, the advent of femtosecond brilliant hard X-ray free electron lasers (XFELs) is opening new horizons to break these limitations. Here, for the first time we present full-scale spatio-temporal measurements of solid-density plasma dynamics, including preplasma generation with tens of nanometer-scale length driven by the leading edge of a relativistic laser pulse, ultrafast heating and ionization at the main pulse arrival, laser-driven blast shock waves and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction. These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics such as small-angle X-ray scattering (SAXS), resonant X-ray emission spectroscopy (RXES), and propagation-based X-ray phase-contrast imaging (XPCI) simultaneously at the European XFEL-HED beamline station.

physics.plasm-ph↗

arXiv2025

Strong geometry dependence of the X-ray Thomson Scattering Spectrum in single crystal silicon

We report on results from an experiment at the European XFEL where we measured the x-ray Thomson scattering (XRTS) spectrum of single crystal silicon with ultrahigh resolution. Compared to similar previous experiments, we consider a more complex scattering setup, in which the scattering vector changes orientation through the crystal lattice. In doing so, we are able to observe strong geometric dependencies in the inelastic scattering spectrum of silicon at low scattering angles. Furthermore, the high quality of the experimental data allows us to benchmark state-of-the-art TDDFT calculations, and demonstrate TDDFT's ability to accurately predict these geometric dependencies. Finally, we note that this experimental data was collected at a much faster rate than another recently reported dataset using the same setup, demonstrating that ultrahigh resolution XRTS data can be collected in more general experimental scenarios.

cond-mat.mtrl-sci↗

arXiv2024

Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics

Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of 40 $μ$m and 100 $μ$m mosaic HAPG crystals, and how the broadening varies across the spectrometer in an energy range of 6.7-8.6 keV. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect of the asymmetry in the IF on the temperature inferred via XRTS for simulated 80 eV CH plasmas, and find that the temperature can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches.

physics.plasm-ph↗

arXiv2024

Ultrahigh Resolution X-ray Thomson Scattering Measurements at the European XFEL

Using a novel ultrahigh resolution ($ΔE \sim 0.1\,$eV) setup to measure electronic features in x-ray Thomson scattering (XRTS) experiments at the European XFEL in Germany, we have studied the collective plasmon excitation in aluminium at ambient conditions, which we can measure very accurately even at low momentum transfers. As a result, we can resolve previously reported discrepancies between ab initio time-dependent density functional theory simulations and experimental observations. The demonstrated capability for high-resolution XRTS measurements will be a game changer for the diagnosis of experiments with matter under extreme densities, temperatures, and pressures, and unlock the full potential of state-of-the-art x-ray free electron laser (XFEL) facilities to study planetary interior conditions, to understand inertial confinement fusion applications, and for material science and discovery.

physics.plasm-ph↗

arXiv2024

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.

physics.plasm-ph↗

arXiv2024

The importance of temperature-dependent collision frequency in PIC simulation on nanometric density evolution of highly-collisional strongly-coupled dense plasmas

Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D3V) PIC simulation that features the realistic collision frequency around the Fermi temperature and atomic-scale cell size. The results are compared with state-of-the-art experimental results as well as with hydrodynamic simulation. We found that the PIC simulation is capable of simulating the nanoscale dynamics of solid-density plasmas around the Fermi temperature up to $\sim$2~ps driven by a laser pulse at the moderate intensity of $10^{14-15}$~$\mathrm{W/cm^{2}}$, by comparing with the state-of-the-art experimental results. The reliability of the simulation can be further improved in the future by implementing multi-dimensional kinetics and radiation transport.

physics.plasm-ph↗

arXiv2024

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.

physics.plasm-ph↗

arXiv2024

Visualizing Plasmons and Ultrafast Kinetic Instabilities in Laser-Driven Solids using X-ray Scattering

Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Our experiments on laser-driven flat silicon membranes show the development of structure with a dominant scale of $~60\unit{nm}$ in the plane of the laser axis and laser polarization, and $~95\unit{nm}$ in the vertical direction with a growth rate faster than $0.1/\mathrm{fs}$. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced instability development, indicating the excitation of surface plasmons and the growth of a new type of filamentation instability. These findings provide new insight into the ultra-fast instability processes in solids under extreme conditions at the nanometer level with important implications for inertial confinement fusion and laboratory astrophysics.

physics.plasm-ph↗

arXiv2023

Probing the dynamics of solid density micro-wire targets after ultra-intense laser irradiation using a free-electron laser

In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity.

physics.plasm-ph↗

arXiv2022

Heating in Multi-Layer Targets at ultra-high Intensity Laser Irradiation and the Impact of Density Oscillation

We present a computational study of isochoric heating in multi-layered targets at ultra-high intensity laser irradiation (approx. 10**20 W/cm**2). Previous studies have shown enhanced ion heating at interfaces, but at the cost of large temperature gradients. Here, we study multi-layered targets to spread this enhanced interface heating to the entirety of the target and find heating parameters at which the temperature distribution is more homogeneous than at a single interface while still exceeding the mean temperature of a non-layered target. Further, we identify a pressure oscillation that causes the layers to alternate between expanding and being compressed with non beneficial effect on the heating. Based on that, we derive an analytical model estimating the oscillation period to find target conditions that optimize heating and temperature homogeneity. This model can also be used to infer the plasma temperature from the oscillation period which can be measured e.g. by XFEL probing.

physics.plasm-ph↗