arXiv subjects

Lionel Bigot

Publications and source records attributed to Lionel Bigot.

12 recordsLinked to original sources

arXiv2024

An extended and refined grid of 3D STAGGER model atmospheres. Processed snapshots for stellar spectroscopy

Context: Traditional one-dimensional (1D) hydrostatic model atmospheres introduce systematic modelling errors into spectroscopic analyses of FGK-type stars. Aims: We present an updated version of the STAGGER-grid of 3D model atmospheres, and explore the accuracy of post-processing methods in preparation for spectral synthesis. Methods: New and old models were (re)computed following an updated workflow, including an updated opacity binning technique. Spectroscopic tests were performed in 3D LTE for a grid of 216 fictitious Fe I lines, spanning a wide range in oscillator strength, excitation potential and central wavelength, and eight model atmospheres that cover the stellar atmospheric parameter range (Teff, log g, [Fe/H]) of FGK-type stars. Using this grid, the impact of vertical and horizontal resolution, and temporal sampling of model atmospheres on spectroscopic diagnostics was tested. Results: We find that downsampling the horizontal mesh from its original size of 240 x 240 grid cells to 80 x 80 cells, i.e. sampling every third grid cell, introduces minimal errors on the equivalent width and normalized line flux across the line and stellar parameter space. Regarding temporal sampling, we find that sampling ten statistically independent snapshots is sufficient to accurately model the shape of spectral line profiles. For equivalent widths, a subsample consisting of only two snapshots is sufficient, introducing an abundance error of less than 0.015 dex. Conclusions: We have computed 32 new model atmospheres and recomputed 116 old model atmospheres present in the original grid. The public release of the STAGGER-grid contains 243 models, excluding models with [Fe/H] = -4.00, and the processed snapshots can be used to improve the accuracy of spectroscopic analyses.

astro-ph.SR↗

arXiv2023

The discovery space of ELT-ANDES. Stars and stellar populations

The ArmazoNes high Dispersion Echelle Spectrograph (ANDES) is the optical and near-infrared high-resolution echelle spectrograph envisioned for the European Extremely Large Telescope (ELT). We present a selection of science cases, supported by new calculations and simulations, where ANDES could enable major advances in the fields of stars and stellar populations. We focus on three key areas, including the physics of stellar atmospheres, structure, and evolution; stars of the Milky Way, Local Group, and beyond; and the star-planet connection. The key features of ANDES are its wide wavelength coverage at high spectral resolution and its access to the large collecting area of the ELT. These features position ANDES to address the most compelling and potentially transformative science questions in stellar astrophysics of the decades ahead, including questions which cannot be anticipated today.

astro-ph.IM↗

arXiv2022

Scaling relations of convective granulation noise across the HR diagram from 3D stellar atmosphere models

High-precision photometric data from space missions have improved our understanding of stellar granulation. These observations have shown with precision the stochastic brightness fluctuations of stars across the HR diagram, allowing us to better understand how stellar surface convection reacts to a change in stellar parameters. These fluctuations need to be understood and quantified in order to improve the detection and characterization of exoplanets. In this work, we provide new scaling relations of two characteristic properties of the brightness fluctuations time series, the standard deviation ($\sigma$) and the auto-correlation time ($\tau\rm_{eff}$). This was done by using long time series of 3D stellar atmosphere models at different metallicities and across the HR diagram, generated with a 3D radiative hydrodynamical code: the STAGGER code. We compared our synthetic granulation properties with the values of a large sample of Kepler stars, and analyzed selected stars with accurate stellar parameters from the Kepler LEGACY sample. Our 3D models showed that $\sigma\propto\nu\rm_{max}^{-0.567\pm0.012}$ and $\tau\rm_{eff}\propto\nu\rm_{max}^{-0.997\pm0.018}$ for stars at solar metallicity. We showed that both $\sigma$ and $\tau\rm_{eff}$ decrease with metallicity, although the metallicity dependence is more significant on $\sigma$. Unlike previous studies, we found very good agreement between $\sigma$ from Kepler targets and the 3D models at $\log{g}\leq3.5$, and a good correlation between the stars and models with $\log{g}\geq3.5$. For $\tau\rm_{eff}$, we found that the 3D models reproduced well the Kepler LEGACY star values. Overall, this study shows that 3D stellar atmosphere models reproduce the granulation properties of stars across the HR diagram.

astro-ph.SR↗

arXiv2021

The SAPP pipeline for the determination of stellar abundances and atmospheric parameters of stars in the core program of the PLATO mission

We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general version can have a much wider range of applications. It can also provide masses, ages, and radii of stars and can be used for stars of stellar types not targeted by the PLATO core program, such as red giants. We validate the code on a set of 27 benchmark stars that includes 19 FGK-type dwarfs, 6 GK-type sub-giants, and 2 red giants. Our results suggest that combining various observables is the optimal approach, as it allows to break degeneracies between different parameters and yields more accurate values of stellar parameters and more realistic uncertainties. For the PLATO core sample, we obtain a typical uncertainty of 27 ($\rm{syst.}$) $\pm$ 37 ($\rm{stat.}$) K for T$_{\rm{eff}}$, 0.00 $\pm$ 0.01 dex for log$g$, 0.02 $\pm$ 0.02 dex for metallicity [Fe/H], -0.01 $\pm$ 0.03 R$_\odot$ for radii, -0.01 $\pm$ 0.05 M$_\odot$ for stellar masses, and -0.14 $\pm$ 0.63 Gyrs for ages. We also show that the best results are obtained by combining the $\nu_{max}$ scaling relation and stellar spectra. This resolves the notorious problem of degeneracies, which is particularly important for F-type stars.

astro-ph.SR↗

arXiv2020

Sun-like Oscillations in the Population II giant HD 122563

We have been monitoring the metal-poor Population II giant, HD 122563, for radial velocity variations since 2016 using the SONG telescope on Tenerife. We have detected the global seismic quantity, numax, which provides information related to the stellar parameters. By combining these data with complementary data, we derive a new precise surface gravity, radius and distance to the star. Our results are corroborated by using the parallax from Gaia DR2. We present these results and some of their implications.

astro-ph.SR↗

arXiv2019

First detection of oscillations in the Halo giant HD 122563: validation of seismic scaling relations and new fundamental parameters

The nearby metal-poor giant HD122563 is an important astrophysical laboratory for which to test stellar atmospheric and interior physics. It is also a benchmark star for which to calibrate methods to apply to large scale surveys. Recently it has been remeasured using various methodologies given the new high precision instruments at our disposal. However, inconsistencies in the observations and models have been found. In order to better characterise this star we have been measuring its radial velocities since 2016 using the Hertzsprung telescope (SONG network node). In this work we report the first detections of sun-like oscillations in this star, and to our knowledge, a detection in the most metal-poor giant to date. We apply the classical seismic scaling relation to derive a new surface gravity of $\log g_{\nu} = 1.39 \pm 0.01$ dex. Constraints on the mass imposed by its PopII giant classification then yield a radius of $30.8 \pm 1.0$ R$_{\odot}$. By coupling this with recent interferometric measurements we infer a distance to the star of 306 $\pm$ 9 pc. Data from the Gaia mission corroborates the distance hypothesis ($d_{\rm GDR2}$ = 290 $\pm$ 5 pc), and thus the updated fundamental parameters. We confirm the validity of the seismic scaling relation without corrections for surface gravity in metal-poor and evolved star regimes. The small discrepancy of 0.04 dex reduces to 0.02 dex by applying corrections to the scaling relations. The new constraints on the HR diagram ($L_{\odot} = 381 \pm 26$) reduce the disagreement between the stellar parameters and evolution models, however, a discrepancy still exists. Fine-tuned stellar evolution calculations show that this can be reconciled by changing the mixing-length parameter by an amount (--0.35) that is in agreement with predictions from recent 3D simulations and empirical results.

astro-ph.SR↗

arXiv2017

A Bootstrap Method for Sinusoid Detection in Colored Noise and Uneven Sampling. Application to Exoplanet Detection

This study is motivated by the problem of evaluating reliable false alarm (FA) rates for sinusoid detection tests applied to unevenly sampled time series involving colored noise, when a (small) training data set of this noise is available. While analytical expressions for the FA rate are out of reach in this situation, we show that it is possible to combine specific periodogram standardization and bootstrap techniques to consistently estimate the FA rate. We also show that the procedure can be improved by using generalized extremevalue distributions. The paper presents several numerical results including a case study in exoplanet detection from radial velocity data.

stat.AP↗

arXiv2017

Science cases for a visible interferometer

High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of developing strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges. This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.

astro-ph.SR↗

arXiv2017

A study of periodograms standardized using training data sets and application to exoplanet detection

When the noise affecting time series is colored with unknown statistics, a difficulty for sinusoid detection is to control the true significance level of the test outcome. This paper investigates the possibility of using training data sets of the noise to improve this control. Specifically, we analyze the performances of various detectors {applied to} periodograms standardized using training data sets. Emphasis is put on sparse detection in the Fourier domain and on the limitation posed by the necessarily finite size of the training sets available in practice. We study the resulting false alarm and detection rates and show that standardization leads in some cases to powerful constant false alarm rate tests. The study is both analytical and numerical. Although analytical results are derived in an asymptotic regime, numerical results show that theory accurately describes the tests' behaviour for moderately large sample sizes. Throughout the paper, an application of the considered periodogram standardization is presented for exoplanet detection in radial velocity data.

math.ST↗

arXiv2016

Using hydrodynamical simulations of stellar atmospheres for periodogram standardization : application to exoplanet detection

Our aim is to devise a detection method for exoplanet signatures (multiple sinusoids) that is both powerful and robust to partially unknown statistics under the null hypothesis. In the considered application, the noise is mostly created by the stellar atmosphere, with statistics depending on the complicated interplay of several parameters. Recent progresses in hydrodynamic (HD) simulations show however that realistic stellar noise realizations can be numerically produced off-line by astrophysicists. We propose a detection method that is calibrated by HD simulations and analyze its performances. A comparison of the theoretical results with simulations on synthetic and real data shows that the proposed method is powerful and robust.

stat.AP↗

arXiv2011

A grid of NLTE corrections for magnesium and calcium in late-type giant and supergiant stars: application to Gaia

We investigate NLTE effects for magnesium and calcium in the atmospheres of late-type giant and supergiant stars. The aim of this paper is to provide a grid of NLTE/LTE equivalent width ratios W/W* of Mg and Ca lines for the following range of stellar parameters: Teff in [3500, 5250] K, log g in [0.5, 2.0] dex and [Fe/H] in [-4.0, 0.5] dex. We use realistic model atoms with the best physics available and taking into account the fine structure. The Mg and Ca lines of interest are in optical and near IR ranges. A special interest concerns the lines in the Gaia spectrograph (RVS) wavelength domain [8470, 8740] A. The NLTE corrections are provided as function of stellar parameters in an electronic table as well as in a polynomial form for the Gaia/RVS lines.

astro-ph.SR↗

arXiv2008

The radii of the nearby K5V and K7V stars 61 Cyg A & B - CHARA/FLUOR interferometry and CESAM2k modeling

Context: The main sequence binary star 61 Cyg (K5V+K7V) is our nearest stellar neighbour in the northern hemisphere. This proximity makes it a particularly well suited system for very high accuracy interferometric radius measurements. Aims: Our goal is to constrain the poorly known evolutionary status and age of this bright binary star. Methods: We obtained high accuracy interferometric observations in the infrared K' band, using the CHARA/FLUOR instrument. We then computed evolutionary models of 61 Cyg A & B with the CESAM2k code. As model constraints, we used a combination of observational parameters from classical observation methods (photometry, spectroscopy) as well as our new interferometric radii. Results: The measured limb darkened disk angular diameters are theta_LD(A) = 1.775 +/- 0.013 mas and theta_LD(B) = 1.581 +/- 0.022 mas, respectively for 61 Cyg A and B. Considering the high accuracy parallaxes available, these values translate into photospheric radii of R(A) = 0.665 +/- 0.005 Rsun and R(B) = 0.595 +/- 0.008 Rsun. The new radii constrain efficiently the physical parameters adopted for the modeling of both stars, allowing us to predict asteroseismic frequencies based on our best-fit models. Conclusions: The CESAM2k evolutionary models indicate an age around 6 Gyrs and are compatible with small values of the mixing length parameter. The measurement of asteroseismic oscillation frequencies in 61 Cyg A & B would be of great value to improve the modeling of this important fiducial stellar system, in particular to better constrain the masses.

astro-ph↗