arXiv subjects

Lingfang Song

Publications and source records attributed to Lingfang Song.

14 recordsLinked to original sources

arXiv2021

Research on the photoacoustic spectrum analysis using k-Wave

Photoacoustic imaging is a new non-destructive medical imaging technology based on photoacoustic effect. It can reflect the difference of light absorption energy by detecting photoacoustic signal. At present, the analysis methods of photoacoustic signals in biological tissues can be divided into two categories, namely, time-domain analysis of signals and frequency-domain analysis of signals. In time domain analysis, the envelope of the received photoacoustic signal is usually used to reconstruct the image. However, due to the influence of various external factors, the time domain signal cannot accurately reflect the characteristics of the absorber itself. Here, photoacoustic spectrum analysis was performed by using k-Wave to obtains the relationship between the structure, size, density of the absorber and the photoacoustic spectrum. Firstly, the relationship between the size of absorber and the photoacoustic spectrum is studied, and the slope and intercept are used to analyze the spectrum. Conversely, the relationship was used to predict the size of the absorber Finally, we used this relationship to predict the size of blood vessels.

physics.optics↗

arXiv2021

Interaction between optical pulse and tumor using finite element analysis

Photoacoustic imaging is an emerging technology based on the photoacoustic effect that has developed rapidly in recent years. It combines the high contrast of optical imaging and the high penetration and high resolution of acoustic imaging. As a non-destructive biological tissue imaging technology, photoacoustic imaging has important application value in the field of biomedicine. With its high efficiency bi-oimaging capabilities and excellent biosafety performance, it has been favored by researchers. The visualization of photoacoustic imaging has great research signifi-cance in the early diagnosis of some diseases, especially tumors. In photoacoustic imaging, light transmission and thermal effects are important processes. This article is based on COMSOL software and uses finite element analysis to construct a physi-cal model for simulation. Through laser pulses into the stomach tissue containing tumor, the physical process of light transmission and biological heat transfer was studied, and a photothermal model composed of two physical fields was built, and finally a series of visualization graphics were obtained. This work has certain theo-retical guiding significance for further promoting the application of photoacoustic imaging in the field of biomedicine.

physics.bio-ph↗

arXiv2020

Deconvolution optical-resolution photoacoustic microscope for high -resolution imaging of brain

We proposed a deconvolution optical-resolution photoacoustic microscope for high -resolution imaging of brain. The focal spot of the photoacoustic microscopy is measured to obtain the lateral PSF (point spread function) of the system. Making the measured PSF as the initial system PSF to perform Lucy- Richardson (LR) deconvolution. The image resolution of cerebral vasculature obtained by this method is higher. The full width at half maximum (FWHM) of the width of blood vessel before and after deconvolution are 7 micrometers and 3.6 micrometers, respectively, and the image definition is increased by about 1.9 times. Experiments show that this method can further improve the clarity of photoacoustic images of cerebral vasculature, which lays the foundation for further research on brain imaging.

physics.med-ph↗

arXiv2020

Optimization method to eliminate the influence of the conical acoustic lens on the transmission of laser beam using ZEMAX

By using the optical design software Zemax, on the basis of geometric optics and primary aberration theory, the optimal design method of collimating mirror is discussed and proposed, which eliminates the influence of conical concave acoustic lens on beam transmission. The lens system imaging before and after the optimization of the calibration lens is simulated by numerical simulation: from the simulation results, after the calibration mirror is optimized, the spherical aberration of the system is greatly reduced,. The root mean square radius of the spot under the 0 degree field of view changes from 993.842 micrometers to 8.091 micrometers, and the geometric radius changes from 1000.98 micrometers to 11.087 micrometers; the MTF curve is obviously improved, the cut-off frequency is increased by nearly 15 times, and the MTF value of the meridian direction and sagittal direction under the 0 degree field of view are between 0.9 and 1; The proposed optimization method of the collimating mirror has important theoretical guiding significance for the study of the large depth of field photoacoustic microscopy imaging system.

physics.optics↗

arXiv2020

Airy-beam large volumetric photoacoustic microscopy

We build a simulation platform for Airy beam photoacoustic microscopy based on K-Wave simulation toolbox in MATLAB. The sample was located in the middle of z direction in the environment. The propagation of Airy beam irradiated on the sample was simulated by solving the Schrodinger equation. And the intensity of Airy beam was simulated by Airy wave pocket. The simulation result showed that: in A-scan, the intensity of light waved over time, reached peak at 49ns; in C-scan, the image agrees with the sample. This research showed that the Airy beam with large depth of field and no diffraction can realize the large depth of field imaging of the photoacoustic microimaging system. The establishment of the simulation platform has a significance for the theoretical research of photoacoustic microscopy and its application in biomedicine.

physics.bio-ph↗

arXiv2020

Bessel ultrasonic probe based on conical acoustic lens: simulation study

Ultrasonic transducer is a sensor that realizes the mutual conversion of ultrasonic and electrical signals, and it is widely used in quality inspection, biomedical imaging and other fields. Commonly used ultrasonic transducers have a small detection range and low sensitivity due to the diffraction of sound waves. Focused transducers are used to improve detection sensitivity. Unfortunately, focused transducers have narrow depth of field. Here, we developed a Bessel ultrasonic transducer for large depth of field by using conical acoustic lens. An acoustic lens is attached to a unfocused ultrasonic. And the acoustic lens is a cuboid prism with a concave cone on the bottom, made of fused silica. Similar to an axicon that can generate a Bessel beam, the Bessel ultrasonic transducer can produce nondiffracting Bessel ultrasonic beams. Therefore, extended depth of field with uniformly high resolution and high detection sensitivity can be obtained. We used COMSOL to simulate the transmission of ultrasonic field of the designed conical acoustic lens, and compare it with the spherical focused ultrasonic transducer. The results show that the depth of field of the Bessel ultrasonic transducer is about 8 times that of the conventional spherical focused ultrasonic transducer. And the depth of field of the Bessel ultrasonic transducer can be further adjusted by adjusting the cone angle of the conical acoustic lens. The Bessel ultrasonic transducer will help improve the capabilities of the ultrasound probe and expand its application range. For example, an ultrasonic probe with a large depth of field will expand the imaging depth of photoacoustic microscopy and enhance its ability in non-destructive testing.

physics.app-ph↗

arXiv2020

Research on mouse brain tissue optical model based on Monte Carlo

We studied the transmission of photons in mouse brain in both with and without intact skull states using Monte Carlo method. Photon track, optical absorption density and fluence rate were used as indicators for analysis. We found that, the photon distribution without intact skull goes farther in both longitudinal and transverse directions compared with that of with intact skull. The distribution of optical absorption density and fluence rate was fusiform and rounder on the whole with intact skull. This study will provide reference and theoretical guidance for the optical imaging of mouse brain and the study of the mouse and human brain.

physics.med-ph↗

arXiv2020

Research on the laser-brain tissue interaction by finite element analysis

The study of the interaction between laser and brain tissue has important theoretical and practical significance for brain imaging. A two-dimensional simulation model that studies the propagation of light and heat transfer in brain tissue based on finite element has been developed by using the commercial finite element simulation software COMSOL Multiphysics. In this study, the model consists of three parts of 1) a layer of water on the surface of the brain, 2) brain tissue and 3) short pulsed laser source (the wavelength is 840nm). The laser point source is located in the middle of the layer of water above the brain tissue and irradiates the brain tissue. The propagation of light in brain tissue was simulated by solving the diffusion equation. And the temperature changes of gray matter and blood vessels were achieved by solving the biological heat transfer equation. The simulation results show that the light energy in the brain tissue decreases exponentially with the increase of penetration depth. Since the cerebral blood vessels have a stronger absorption on light compared with the surrounding tissues, the remaining light energy of the blood vessels in the cerebral cortex is ~ 85.8% of the remaining light energy in the surrounding gray matter. In the process of biological heat transfer, due to more light deposition in blood vessels, the temperature of blood vessels is 0.15 K higher than that of gray matter, and the temperature of gray matter hardly changes. This research is helpful to understand the propagation of light in the brain and the interaction between them, and has certain theoretical guiding for the optical imaging of the brain.

physics.med-ph↗

arXiv2020

Denoising convolutional neural networks for photoacoustic microscopy

Photoacoustic imaging is a new imaging technology in recent years, which combines the advantages of high resolution and rich contrast of optical imaging with the advantages of high penetration depth of acoustic imaging. Photoacoustic imaging has been widely used in biomedical fields, such as brain imaging, tumor detection and so on. The signal-to-noise ratio (SNR) of image signals in photoacoustic imaging is generally low due to the limitation of laser pulse energy, electromagnetic interference in the external environment and system noise. In order to solve the problem of low SNR of photoacoustic images, we use feedforward denoising convolutional neural network to further process the obtained images, so as to obtain higher SNR images and improve image quality. We use Python language to manage the referenced Python external library through Anaconda, and build a feedforward noise-reducing convolutional neural network on Pycharm platform.We first processed and segmated a training set containing 400 images, and then used it for network training. Finally, we tested it with a series of cerebrovascular photoacoustic microscopy images.The results show that the peak signal-to-noise ratio (PSNR) of the image increases significantly before and after denoising.The experimental results verify that the feed-forward noise reduction convolutional neural network can effectively improve the quality of photoacoustic microscopic images, which provides a good foundation for the subsequent biomedical research.

eess.IV↗

arXiv2020

Photoacoustic microscopical simulation platform for large volumetric imaging using Bessel beam

We developed a Bessel-beam photoacoustic microscopical simulation platform by using the k-Wave: MATLAB toolbox. The simulation platform uses the ring slit method to generate Bessel beam. By controlling the inner and outer radius of the ring slit, the depth-of-field (DoF) of Bessel beam can be controlled. And the large volumetric image is obtained by point scanning. The simulation experiments on blood vessels was carried out to demonstrate the feasibility of the simulation plat-form. This simulation work can be used as an auxiliary tool for the research of Bessel-beam photoacoustic microscopy.

physics.med-ph↗

arXiv2020

Axial cosinoidal structured illumination using phase modulation

We propose a novel method for generating axial cosine structured light by using phase-only spatial light modulator. We implemented axial cosine structured light using holographic technique. The computer generates double concentric annular slits with different radius, a prism phase is applied on the slits to tilts the beam that incidents on the slits away from the optical axis. Different annular beam produce Bessel beams with different axial wave vectors, axial cosine structured light can be obtained from the interference between two Bessel beams. The period and phase of axial cosine structured light can be adjusted by adjusting the radius and the initial phase difference of the double concentric annular beams. We theoretically and experimentally verify that the method can effectively generate axial cosine structured light.

physics.optics↗

arXiv2020

Synthetic multi-focus optical-resolution photoacoustic microscope for large volumetric imaging

Photoacoustic microscopy is becoming an important tool for the biomedical research. It has been widely used in biological researches, such as structural imaging of vasculature, brain structural and functional imaging, and tumor detection. The conventional optical-resolution photoacoustic microscopy (OR- PAM) employs focused gaussian beam to achieve high lateral resolution by a microscope objective with high numerical apertures. Since the focused gaussian beam only has narrow depth range in focus, little detail in depth direction can be revealed. Here, we developed a synthetic multi-focus optical-resolution photoacoustic microscope using multi-scale weighted gradient-based fusion. Based on the saliency of the image structure, a gradient-based multi-focus image fusion method is used, and a multi-scale method is used to determine the gradient weights. We pay special attention to a dual-scale scheme, which effectively solves the fusion problem caused by anisotropic blur and registration error. First, the structure-based large-scale focus measurement method is used to reduce the effect of anisotropic blur and registration error on the detection of the focus area, and then the gradient weights near the edge wave are used by applying the small-scale focus measure. Simulation was performed to test the performance of our method, different focused images were used to verify the feasibility of the method. Performance of our method was analyzed by calculating Entropy, Mean Square Error (MSE) and Edge strength. The result of simulation shown that this method can extend the depth of field of PAM two times without the sacrifice of lateral resolution. And the in vivo imaging of the zebra fish further demonstrates the feasibility of our method.

eess.IV↗

arXiv2020

Computed extended depth of field optical-resolution photoacoustic microscope

Photoacoustic microscopy with large depth of focus is significant to the biomedical research. The conventional optical-resolution photoacoustic microscope (OR-PAM) suffers from limited depth of field (DoF) since the employed focused Gaussian beam only has a narrow depth range in focus, little details in depth direction can be revealed. Here, we developed a computed extended depth of field method for photoacoustic microscope by using wavelet transform image fusion rules. Wavelet transform is performed on the max amplitude projection (MAP) images acquired at different axial positions by OR-PAM to separate the low and high frequencies, respectively. The fused low frequency coefficients is taking the average of the low-frequency coefficients of the low-frequency part of the images. And maximum selection rule is used in high frequency coefficients. Wavelet coefficient of the MAP images are compared and select the maximum value coefficient is taken as fused high-frequency coefficients. And finally the wavelet inverse transform is performed to achieve large DoF. Simulation was performed to demonstrate that this method can extend the depth of field of PAM two times without the sacrifice of lateral resolution. And the in vivo imaging of the mouse cerebral vasculature with intact skull further demonstrates the feasibility of our method.

eess.IV↗

arXiv2020

Multi-pulse Photoacoustic Microscopy Based on k-space Pseudospectral Method: Simulation Study

Photoacoustic imaging has emerged in the past decades. Compared with the traditional medical imaging mode, it has better imaging performance and has great development potential in the field of biological imaging. In traditional photoacoustic microscopy, a single laser pulse is generally used to irradiate the sample to produce photoacoustic signal. And signal-to-noise ratio (SNR) is a very important indicator for photoacoustic imaging. In order to obtain the image with high SNR, multiple acquisition or increasing laser pulse energy is usually adopted. The former will lead to slower imaging speed, and the latter will lead to photobleaching or phototoxicity. Here, we proposes multi-pulse photoacoustic microscopy, the photoacoustic signals were stimulated sequentially using multiple laser pulses in each A line data acquisition. In order to verify the feasibility of this method, a multi-pulse photoacoustic imaging simulation platform is established using k-Wave toolbox. The performance of multi-pulse photoacoustic imaging is verified through the three scanning modes of photoacoustic microscopy A-scan, B -scan, and C-scan. The results indicate that the SNR is proportion to the number of laser pulses used, high SNR can be achieved by low-energy laser pulse. This work will help to expand the application of photoacoustic imaging.

physics.med-ph↗