arXiv Science⌕ Search

arXiv subjects

Lin Zhao

Publications and source records attributed to Lin Zhao.

At least 271 records · Page 15Linked to original sources

Momentum-based Accelerated Q-learning

This paper studies accelerated algorithms for Q-learning. We propose an acceleration scheme by incorporating the historical iterates of the Q-function. The idea is conceptually inspired by the momentum-based acceleration methods in the optimization theory. Under finite state-action space settings, the proposed accelerated Q-learning algorithm provably converges to the global optimum with a rate of $\mathcal{O}(1/\sqrt{T})$. While sharing a comparable theoretic convergence rate with the existing Speedy Q-learning (SpeedyQ) algorithm, we numerically show that the proposed algorithm outperforms SpeedyQ via playing the FrozenLake grid world game. Furthermore, we generalize the acceleration scheme to the continuous state-action space case where function approximation of the Q-function is necessary. In this case, the algorithms are validated using commonly adopted testing problems in reinforcement learning, including two discrete-time linear quadratic regulation (LQR) problems from the Deepmind Control Suite, and the Atari 2600 games. Simulation results show that the proposed accelerated algorithms can improve the convergence performance compared with the vanilla Q-learning algorithm.

eess.SY↗

High Precision Determination of the Planck Constant by Modern Photoemission Spectroscopy

The Planck constant, with its mathematical symbol $h$, is a fundamental constant in quantum mechanics that is associated with the quantization of light and matter. It is also of fundamental importance to metrology, such as the definition of ohm and volt, and the latest definition of kilogram. One of the first measurements to determine the Planck constant is based on the photoelectric effect, however, the values thus obtained so far have exhibited a large uncertainty. The accepted value of the Planck constant, 6.62607015$\times$10$^{-34}$ J$\cdot$s, is obtained from one of the most precise methods, the Kibble balance, which involves quantum Hall effect, Josephson effect and the use of the International Prototype of the Kilogram (IPK) or its copies. Here we present a precise determination of the Planck constant by modern photoemission spectroscopy technique. Through the direct use of the Einstein's photoelectric equation, the Planck constant is determined by measuring accurately the energy position of the gold Fermi level using light sources with various photon wavelengths. The precision of the measured Planck constant, 6.62610(13)$\times$10$^{-34}$ J$\cdot$s, is four to five orders of magnitude improved from the previous photoelectric effect measurements. It has rendered photoemission method to become one of the most accurate methods in determining the Planck constant. We propose that this direct method of photoemission spectroscopy has advantages and a potential to further increase its measurement precision of the Planck constant to be comparable to the most accurate methods that are available at present.

physics.ins-det↗

Data-based wind disaster climate identification algorithm and extreme wind speed prediction

An extreme wind speed estimation method that considers wind hazard climate types is critical for design wind load calculation for building structures affected by mixed climates. However, it is very difficult to obtain wind hazard climate types from meteorological data records, because they restrict the application of extreme wind speed estimation in mixed climates. This paper first proposes a wind hazard type identification algorithm based on a numerical pattern recognition method that utilizes feature extraction and generalization. Next, it compares six commonly used machine learning models using K-fold cross-validation. Finally, it takes meteorological data from three locations near the southeast coast of China as examples to examine the algorithm performance. Based on classification results, the extreme wind speeds calculated based on mixed wind hazard types is compared with those obtained from conventional methods, and the effects on structural design for different return periods are discussed.

stat.ML↗

Evolution of Incommensurate Superstructure and Electronic Structure with Pb Substitution in (Bi$_{2-x}$Pb$_{x}$)Sr$_2$CaCu$_2$O$_{8+δ}$ Superconductors

High-quality Bi$_{2-x}$Pb$_{x}$Sr$_2$CaCu$_2$O$_{8+δ}$ (Bi2212) single crystals have been successfully grown by the traveling solvent floating zone technique with a wide range of Pb substitution ($x=0-0.8$). The samples are characterized by transmission electron microscope (TEM) and measured by high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) with different photon energies. A systematic evolution of the electronic structure and superstructure with Pb substitution has been revealed for the first time. The superstructure shows a significant change with Pb substitution and the incommensurate modulation vector ($\textbf{Q}$) decreases with increasing Pb substitution. In the meantime, the superstructure intensity from ARPES measurements also decreases dramatically with increasing Pb concentration. The superstructure in Bi2212 can be effectively suppressed by Pb substitution and it nearly disappears with a Pb substitution of $x=0.8$. We also find that the superstructure bands in ARPES measurements depend sensitively on the photon energy of lasers used; they can become even stronger than the main band when using a laser photon energy of 10.897 eV. These results provide important information on the origin of the incommensurate superstructure and its control and suppression in bismuth-based high temperature superconductors.

cond-mat.supr-con↗

Distinct Superconducting Gap on Two Bilayer-Split Fermi Surface Sheets in $Bi_2Sr_2CaCu_2O_{8+δ}$ Superconductor

High resolution laser-based angle-resolved photoemission measurements were carried out on an overdoped $Bi_2Sr_2CaCu_2O_{8+δ}$ superconductor with a Tc of 75 K. Two Fermi surface sheets caused by bilayer splitting are clearly identified with rather different doping levels: the bonding sheet corresponds to a doping level of 0.14 which is slightly underdoped while the antibonding sheet has a doping of 0.27 that is heavily overdoped, giving an overall doping level of 0.20 for the sample. Different superconducting gap sizes on the two Fermi surface sheets are revealed for the first time. The superconducting gap on the antibonding Fermi surface sheet follows a standard d-wave form while it deviates from the standard d-wave form for the bonding Fermi surface sheet. The maximum gap difference between the two Fermi surface sheets near the antinodal region is $\sim$2 meV. These observations provide important information for studying the relationship between the Fermi surface topology and superconductivity, and the layer-dependent superconductivity in high temperature cuprate superconductors.

cond-mat.supr-con↗

Quasiparticle interference and charge order in a heavily overdoped non-superconducting cuprate

One of the key issues in unraveling the mystery of high Tc superconductivity in the cuprates is to understand the normal state outside the superconducting dome. Here we perform scanning tunneling microscopy and spectroscopy measurements on a heavily overdoped, non-superconducting (Bi,Pb)2Sr2CuO6+x cuprate. Spectroscopic imaging reveals dispersive quasiparticle interferences and the Fourier transforms uncover the evolution of momentum space topology. More interestingly, we observe nanoscale patches of static charge order with sqrt(2)*sqrt(2) periodicity. Both the dispersive quasiparticle interference and static charge order can be qualitatively explained by theoretical calculations, which reveal the unique electronic structure of strongly overdoped cuprate.

cond-mat.supr-con↗

Insulating Parent Phase and Distinct Doping Evolution to Superconductivity in Single-Layer FeSe/SrTiO3 Films

The single-layer FeSe/SrTiO3 (FeSe/STO) films have attracted much attention because of their simple crystal structure, distinct electronic structure and record high superconducting transition temperature (Tc). The origin of the dramatic Tc enhancement in single-layer FeSe/STO films and the dichotomy of superconductivity between single-layer and multiple-layer FeSe/STO films are still under debate. Here we report a comprehensive high resolution angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy measurements on the electronic structure evolution with doping in single-layer and multiple-layer FeSe/STO films. We find that the single-layer FeSe/STO films have a distinct parent phase and a route of doping evolution to superconductivity that are fundamentally different from multiple-layer FeSe/STO films. The parent phase of the single-layer FeSe/STO films is insulating, and its doping evolution is very similar to that of doping a Mott insulator in cuprate superconductors. In multiple-layer FeSe/STO films, high-Tc superconductivity occurs by suppressing the nematic order in the parent compound with electron doping. The single-layer FeSe/STO films represent the first clear case in the iron-based superconductors that the parent compound is an insulator. Our observations of the unique parent state and doping evolution in the single-layer FeSe/STO films provide key insight in understanding its record high-Tc superconductivity. They also provide a new route of realizing superconductivity in iron-based superconductors that is common in high temperature cuprate superconductors.

cond-mat.supr-con↗

Identification of a Large Amount of Excess Fe in Superconducting Single-Layer FeSe/SrTiO3 Films

The single-layer FeSe films grown on SrTiO3 (STO) substrates have attracted much attention because of its record high superconducting critical temperature (Tc). It is usually believed that the composition of the epitaxially grown single-layer FeSe/STO films is stoichiometric, i.e., the ratio of Fe and Se is 1:1. Here we report the identification of a large amount of excess Fe in the superconducting single-layer FeSe/STO films. By depositing Se onto the superconducting single-layer FeSe/STO films, we find by in situ scanning tunneling microscopy (STM) the formation of the second-layer FeSe islands on the top of the first layer during the annealing process at a surprisingly low temperature ($\sim$150°C) which is much lower than the usual growth temperature ($\sim$490°C). This observation is used to detect excess Fe and estimate its quantity in the single-layer FeSe/STO films. The amount of excess Fe detected is at least 20% that is surprisingly high for the superconducting single-layer FeSe/STO films. The discovery of such a large amount of excess Fe should be taken into account in understanding the high-Tc superconductivity and points to a likely route to further enhance Tc in the superconducting single-layer FeSe/STO films.

cond-mat.supr-con↗

High-throughput investigation of tunable superconductivity in FeSe films

There is an ongoing debate about the relative importance of structural change versus doping charge carriers on the mechanism of superconductivity in Fe-based materials. Elucidating this issue is a major challenge since it would require a large number of samples where structure properties or the carrier density is systematically varied. FeSe, with its structural simplicity, is an ideal platform for addressing this question. It has been demonstrated that the superconductivity in this material can be controlled through crystal lattice tuning, as well as electronic structure manipulation. Here, we apply a high-throughput methodology to FeSe to systematically delineate the interdependence of its structural and electronic properties. Using a dual-beam pulsed laser deposition, we have generated FeSe films with a marked gradient in the superconducting transition temperature (below 2 K < Tc < 12 K) across 1 cm width of the films. The Tc gradient films display ~ 1% continuous stretch and compression in the out-of-plane and in-plane lattice constants respectively, triggering the continuous enhancement of superconductivity. Combining transport and angular-resolved photoemission measurements on uniform FeSe films with tunable Tc from 3 K to 14 K, we find that the electron carrier density is intimately correlated with Tc, i.e., it increases by a factor of 6 and ultimately surpasses the almost constant hole concentration. Our transmission electron microscope and band structure calculations reveal that rather than by shifting the chemical potential, the enhanced superconductivity is linked to the selective adjustment of the dxy band dispersion across the Fermi level by means of reduced local lattice distortions. Therefore, such novel mechanism provides a key to understand discrete superconducting phases in FeSe.

cond-mat.supr-con↗

Detailed Electronic Structure of the Three-Dimensional Fermi Surface and its Sensitivity to Charge Density Wave Transition in ZrTe3 Revealed by High Resolution Laser-Based Angle-Resolved Photoemission Spectroscopy

The detailed information of the electronic structure is the key for understanding the nature of charge density wave (CDW) order and its relationship with superconducting order in microscopic level. In this paper, we present high resolution laser-based angle-resolved photoemission spectroscopy (ARPES) study on the three-dimensional (3D) hole-like Fermi surface around the Brillouin zone center in a prototypical qusi-one-dimensional CDW and superconducting system ZrTe3. Double Fermi surface sheets are clearly resolved for the 3D hole-like Fermi surface around the zone center. The 3D Fermi surface shows a pronounced shrinking with increasing temperature. In particular, the quasiparticle scattering rate along the 3D Fermi surface experiences an anomaly near the charge density wave transition temperature of ZrTe3 (~63 K). Signature of electron-phonon coupling is observed with a dispersion kink at ~20 meV; the strength of the electron-phonon coupling around the 3D Fermi surface is rather weak. These results indicate that the 3D Fermi surface is also closely connected to the charge-density-wave transition and suggest a more global impact on the entire electronic structure induced by CDW phase transition in ZrTe3.

cond-mat.mtrl-sci↗

Emergence of Superconductivity from Fully Incoherent Normal State in an Iron-Based Superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$

In unconventional superconductors, it is generally believed that understanding the physical properties of the normal state is a pre-requisite for understanding the superconductivity mechanism. In conventional superconductors like niobium or lead, the normal state is a Fermi liquid with a well-defined Fermi surface and well-defined quasipartcles along the Fermi surface. Superconductivity is realized in this case by the Fermi surface instability in the superconducting state and the formation and condensation of the electron pairs (Cooper pairing). The high temperature cuprate superconductors, on the other hand, represent another extreme case that superconductivity can be realized in the underdoped region where there is neither well-defined Fermi surface due to the pseudogap formation nor quasiparticles near the antinodal regions in the normal state. Here we report a novel scenario that superconductivity is realized in a system with well-defined Fermi surface but without quasiparticles along the Fermi surface in the normal state. High resolution laser-based angle-resolved photoemission measurements have been performed on an optimally-doped iron-based superconductor (Ba$_{0.6}$K$_{0.4}$)Fe$_2$As$_2$. We find that, while sharp superconducting coherence peaks emerge in the superconducting state on the hole-like Fermi surface sheets, no quasiparticle peak is present in the normal state. Its electronic behaviours deviate strongly from a Fermi liquid system. The superconducting gap of such a system exhibits an unusual temperature dependence that it is nearly a constant in the superconducting state and abruptly closes at T$_c$. These observations have provided a new platform to study unconventional superconductivity in a non-Fermi liquid system.

cond-mat.supr-con↗

Disappearance of Superconductivity and a Concomitant Lifshitz Transition in Heavily-Overdoped Bi2Sr2CuO6 Superconductor Revealed by Angle-Resolved Photoemission Spectroscopy

By partially doping Pb to effectively suppress the superstructure in single-layered cuprate Bi2Sr2CuO6+δ(Pb-Bi2201) and annealing them in vacuum or in high pressure oxygen atmosphere, a series of high quality Pb-Bi2201 single crystals are obtained with Tc covering from 17 K to non-supercondcuting in the overdoped region. High resolution angle resolved photoemission spectroscopy (ARPES) measurements are carried out on these samples to investigate the evolution of the Fermi surface topology with doping in the normal state. Clear and complete Fermi surface are observed and quantitatively analyzed in all these overdoped Pb-Bi2201 samples. A Lifshitz transition from hole-like Fermi surface to electron like Fermi surface with increasing doping is observed at a doping level of ~0.35. This transition coincides with the change that the sample undergoes from superconducting to non-superconducting states. Our results reveal the emergence of an electron-like Fermi surface and the existence of a Lifshitz transition in heavily overdoped Bi2201 samples. They provide important information in understanding the connection between the disappearance of superconductivity and the Lifshitz transition in the overdoped region.

cond-mat.supr-con↗

Structure-Infused Copy Mechanisms for Abstractive Summarization

Seq2seq learning has produced promising results on summarization. However, in many cases, system summaries still struggle to keep the meaning of the original intact. They may miss out important words or relations that play critical roles in the syntactic structure of source sentences. In this paper, we present structure-infused copy mechanisms to facilitate copying important words and relations from the source sentence to summary sentence. The approach naturally combines source dependency structure with the copy mechanism of an abstractive sentence summarizer. Experimental results demonstrate the effectiveness of incorporating source-side syntactic information in the system, and our proposed approach compares favorably to state-of-the-art methods.

cs.CL↗

Evidence for Multiple Underlying Fermi Surface and Isotropic Energy Gap in the Cuprate Parent Compound Ca$_2$CuO$_2$Cl$_2$

The parent compounds of the high-temperature cuprate superconductors are Mott insulators. It has been generally agreed that understanding the physics of the doped Mott insulators is essential to understanding the mechanism of high temperature superconductivity. A natural starting point is to elucidate the basic electronic structure of the parent compound. Here we report comprehensive high resolution angle-resolved photoemission measurements on Ca$_2$CuO$_2$Cl$_2$, a Mott insulator and a prototypical parent compound of the cuprates. Multiple underlying Fermi surface sheets are revealed for the first time. The high energy waterfall-like band dispersions exhibit different behavior near the nodal and antinodal regions. Two distinct energy scales are identified: a d-wave-like low energy peak dispersion and a nearly isotropic lower Hubbard band gap. These observations provide new information on the electronic structure of the cuprate parent compound, which is important for understanding the anomalous physical properties and superconductivity mechanism of the high temperature cuprate superconductors.

cond-mat.supr-con↗

New Developments in Laser-Based Photoemission Spectroscopy and its Scientific Applications: a Key Issues Review

The significant progress in angle-resolved photoemission spectroscopy (ARPES) in last three decades has elevated it from a traditional band mapping tool to a precise probe of many-body interactions and dynamics of quasiparticles in complex quantum systems. The recent developments of deep ultraviolet (DUV, including ultraviolet and vacuum ultraviolet) laser-based ARPES have further pushed this technique to a new level. In this paper, we review some latest developments in DUV laser-based photoemission systems, including the super-high energy and momentum resolution ARPES, the spin-resolved ARPES, the time-of-flight ARPES, and the time-resolved ARPES. We also highlight some scientific applications in the study of electronic structure in unconventional superconductors and topological materials using these state-of-the-art DUV laser-based ARPES. Finally we provide our perspectives on the future directions in the development of laser-based photoemission systems.

cond-mat.supr-con↗

Connections between Mean-Field Game and Social Welfare Optimization

This paper studies the connection between a class of mean-field games and a social welfare optimization problem. We consider a mean-field game in function spaces with a large population of agents, and each agent seeks to minimize an individual cost function. The cost functions of different agents are coupled through a mean-field term that depends on the mean of the population states. We show that although the mean-field game is not a potential game, under some mild condition the $ε$-Nash equilibrium of the mean-field game coincides with the optimal solution to a social welfare optimization problem, and this is true even when the individual cost functions are non-convex. The connection enables us to evaluate and promote the efficiency of the mean-field equilibrium. In addition, it also leads to several important implications on the existence, uniqueness, and computation of the mean-field equilibrium. Numerical results are presented to validate the solution, and examples are provided to show the applicability of the proposed approach.

math.OC↗

Orbital Origin of Extremely Anisotropic Superconducting Gap in Nematic Phase of FeSe Superconductor

The iron-based superconductors are characterized by multiple-orbital physics where all the five Fe 3$d$ orbitals get involved. The multiple-orbital nature gives rise to various novel phenomena like orbital-selective Mott transition, nematicity and orbital fluctuation that provide a new route for realizing superconductivity. The complexity of multiple-orbital also asks to disentangle the relationship between orbital, spin and nematicity, and to identify dominant orbital ingredients that dictate superconductivity. The bulk FeSe superconductor provides an ideal platform to address these issues because of its simple crystal structure and unique coexistence of superconductivity and nematicity. However, the orbital nature of the low energy electronic excitations and its relation to the superconducting gap remain controversial. Here we report direct observation of highly anisotropic Fermi surface and extremely anisotropic superconducting gap in the nematic state of FeSe superconductor by high resolution laser-based angle-resolved photoemission measurements. We find that the low energy excitations of the entire hole pocket at the Brillouin zone center are dominated by the single $d_{xz}$ orbital. The superconducting gap exhibits an anti-correlation relation with the $d_{xz}$ spectral weight near the Fermi level, i.e., the gap size minimum (maximum) corresponds to the maximum (minimum) of the $d_{xz}$ spectral weight along the Fermi surface. These observations provide new insights in understanding the orbital origin of the extremely anisotropic superconducting gap in FeSe superconductor and the relation between nematicity and superconductivity in the iron-based superconductors.

cond-mat.supr-con↗

Evidence of Electron-Hole Imbalance in WTe2 from High-Resolution Angle-Resolved Photoemission Spectroscopy

WTe2 has attracted a great deal of attention because it exhibits extremely large and nonsaturating magnetoresistance. The underlying origin of such a giant magnetoresistance is still under debate. Utilizing laser-based angle-resolved photoemission spectroscopy with high energy and momentum resolutions, we reveal the complete electronic structure of WTe2. This makes it possible to determine accurately the electron and hole concentrations and their temperature dependence. We find that, with increasing the temperature, the overall electron concentration increases while the total hole concentration decreases. It indicates that the electron-hole compensation, if it exists, can only occur in a narrow temperature range, and in most of the temperature range there is an electron-hole imbalance. Our results are not consistent with the perfect electron-hole compensation picture that is commonly considered to be the cause of the unusual magnetoresistance in WTe2. We identified a flat band near the Brillouin zone center that is close to the Fermi level and exhibits a pronounced temperature dependence. Such a flat band can play an important role in dictating the transport properties of WTe2. Our results provide new insight on understanding the origin of the unusual magnetoresistance in WTe2.

cond-mat.mtrl-sci↗