arXiv subjects

Lin Gu

Publications and source records attributed to Lin Gu.

At least 73 records · Page 4Linked to original sources

arXiv2024

The re-entrant ferromagnetism due to symmetric exchange bias in two septuple-layer MnBi2Te4 epitaxial films

MnBi2Te4 (MBT) is a typical magnetic topological insulator with an A-type antiferromagnetic (AFM) ground state. Here we prepared ultra-thin MBT films with controlled anti-site defects and observed rich doping-dependent magnetic behaviors. We find in one-septuple-layer MBT films a ferrimagnetic ground state and in two-septuple-layer ones a kind of re-entrant ferromagnetism (FM) that disappears with increased Bi-on-Mn doping in the FM Mn-layers. This re-entrant behavior is attributed to a kind of symmetric exchange-bias effect that arises in the presence of both AFM and FM sub-systems due to the introduction of high-dense Mn-on-Bi anti-site defects. Furthermore, all MBT films display spin-glass-like behaviors. Our work demonstrates rich magnetic behaviors originating from the competing magnetic interactions between Mn spins at different lattice positions in MBT.

cond-mat.mtrl-sci↗

arXiv2024

Confined Magnetization at the Sublattice-Matched Ruthenium Oxide Heterointerface

Creating a heterostructure by combining two magnetically and structurally distinct ruthenium oxides is a crucial approach for investigating their emergent magnetic states and interactions. Previously, research has predominantly concentrated on the intrinsic properties of the ferromagnet SrRuO3 and recently discovered altermagnet RuO2 solely. Here, we engineered an ultrasharp sublattice-matched heterointerface using pseudo-cubic SrRuO3 and rutile RuO2, conducting an in-depth analysis of their spin interactions. Structurally, to accommodate the lattice symmetry mismatch, the inverted RuO2 layer undergoes an in-plane rotation of 18 degrees during epitaxial growth on SrRuO3 layer, resulting in an interesting and rotational interface with perfect crystallinity and negligible chemical intermixing. Performance-wise, the interfacial layer of 6 nm in RuO2 adjacent to SrRuO3 exhibits a nonzero magnetic moment, contributing to an enhanced anomalous Hall effect (AHE) at low temperatures. Furthermore, our observations indicate that, in contrast to SrRuO3 single layers, the AHE of [(RuO2)15/(SrRuO3)n] heterostructures shows nonlinear behavior and reaches its maximum when the SrRuO3 thickness reaches tens of nm. These results suggest that the interfacial magnetic interaction surpasses that of all-perovskite oxides (~5-unit cells). This study underscores the significance and potential applications of magnetic interactions based on the crystallographic asymmetric interfaces in the design of spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

One-Dimensional Ionic-Bonded Structures in NiSe Nanowire

One-dimensional van der Waals (1D vdW) materials, characterized by atomic chains bonded ionically or covalently in one direction and held together by van der Waals interactions in the perpendicular directions, have recently gained intensive attention due to their exceptional functions. In this work, we report the discovery of 1D ionic-bonded structures in NiSe nanowires. Utilizing aberration-corrected scanning transmission electron microscopy, we identified four distinct structural phases composed of two fundamental 1D building blocks: a triangle-shaped unit and a parallelogram-shaped unit. These phases can transform into one another through topotactic combinations of the structural units. Density functional theory calculations reveal that these structural units are bound by ionic bonds, unlike the van der Waals forces typically found in 1D vdW materials. The diverse arrangements of these building blocks may give rise to unique electronic structures and magnetic properties, paving the way for designing advanced materials with novel functionalities.

cond-mat.mes-hall↗

arXiv2024

Expert Knowledge-Aware Image Difference Graph Representation Learning for Difference-Aware Medical Visual Question Answering

To contribute to automating the medical vision-language model, we propose a novel Chest-Xray Difference Visual Question Answering (VQA) task. Given a pair of main and reference images, this task attempts to answer several questions on both diseases and, more importantly, the differences between them. This is consistent with the radiologist's diagnosis practice that compares the current image with the reference before concluding the report. We collect a new dataset, namely MIMIC-Diff-VQA, including 700,703 QA pairs from 164,324 pairs of main and reference images. Compared to existing medical VQA datasets, our questions are tailored to the Assessment-Diagnosis-Intervention-Evaluation treatment procedure used by clinical professionals. Meanwhile, we also propose a novel expert knowledge-aware graph representation learning model to address this task. The proposed baseline model leverages expert knowledge such as anatomical structure prior, semantic, and spatial knowledge to construct a multi-relationship graph, representing the image differences between two images for the image difference VQA task. The dataset and code can be found at https://github.com/Holipori/MIMIC-Diff-VQA. We believe this work would further push forward the medical vision language model.

cs.CV↗

arXiv2024

Frequency-aware Feature Fusion for Dense Image Prediction

Dense image prediction tasks demand features with strong category information and precise spatial boundary details at high resolution. To achieve this, modern hierarchical models often utilize feature fusion, directly adding upsampled coarse features from deep layers and high-resolution features from lower levels. In this paper, we observe rapid variations in fused feature values within objects, resulting in intra-category inconsistency due to disturbed high-frequency features. Additionally, blurred boundaries in fused features lack accurate high frequency, leading to boundary displacement. Building upon these observations, we propose Frequency-Aware Feature Fusion (FreqFusion), integrating an Adaptive Low-Pass Filter (ALPF) generator, an offset generator, and an Adaptive High-Pass Filter (AHPF) generator. The ALPF generator predicts spatially-variant low-pass filters to attenuate high-frequency components within objects, reducing intra-class inconsistency during upsampling. The offset generator refines large inconsistent features and thin boundaries by replacing inconsistent features with more consistent ones through resampling, while the AHPF generator enhances high-frequency detailed boundary information lost during downsampling. Comprehensive visualization and quantitative analysis demonstrate that FreqFusion effectively improves feature consistency and sharpens object boundaries. Extensive experiments across various dense prediction tasks confirm its effectiveness. The code is made publicly available at https://github.com/Linwei-Chen/FreqFusion.

cs.CV↗

arXiv2024

Versatile Method of Engineering the Band Alignment and the Electron Wavefunction Hybridization of Hybrid Quantum Devices

With the development of quantum technology, hybrid devices that combine superconductors (S) and semiconductors (Sm) have attracted great attention due to the possibility of engineering structures that benefit from the integration of the properties of both materials. However, until now, none of the experiments have reported good control of band alignment at the interface, which determines the strength of S-Sm coupling and the proximitized superconducting gap. Here, we fabricate hybrid devices in a generic way with argon milling to modify the interface while maintaining its high quality. First, after the milling the atomically connected S-Sm interfaces appear, resulting in a large induced gap, as well as the ballistic transport revealed by the multiple Andreev reflections and quantized above-gap conductance plateaus. Second, by comparing transport measurement with Schrödinger-Poisson (SP) calculations, we demonstrate that argon milling is capable of varying the band bending strength in the semiconducting wire as the electrons tend to accumulate on the etched surface for longer milling time. Finally, we perform nonlocal measurements on advanced devices to demonstrate the coexistence and tunability of crossed Andreev reflection (CAR) and elastic co-tunneling (ECT) -- key ingredients for building the prototype setup for realization of Kitaev chain and quantum entanglement probing. Such a versatile method, compatible with the standard fabrication process and accompanied by the well-controlled modification of the interface, will definitely boost the creation of more sophisticated hybrid devices for exploring physics in solid-state systems.

cond-mat.mes-hall↗

arXiv2024

Inferior interfacial superconductivity in 1 UC FeSe/SrVO$_3$/SrTiO$_3$ with screened interfacial electron-phonon coupling

Monolayer FeSe/TiO$_x$ and FeSe/FeO$_x$ interfaces exhibit significant superconductivity enhancement compared to bulk FeSe, with interfacial electron-phonon coupling (EPC) playing a crucial role. However, the reduced dimensionality in monolayer FeSe, which may drive superconducting fluctuations, complicates the understanding of the enhancement mechanisms. Here we construct a new superconducting interface: monolayer FeSe/SrVO$_3$/SrTiO$_3$, in which the itinerant electrons of highly metallic SrVO$_3$ films can screen all the high-energy Fuchs-Kliewer phonons, including those of SrTiO$_3$, making it the first FeSe/oxide system with screened interfacial EPC while maintaining the monolayer FeSe thickness. Despite comparable doping levels, the heavily electron-doped monolayer FeSe/SrVO$_3$ exhibits a lower pairing temperature ($T_\mathrm{g}$ $\sim$ 48 K) than FeSe/SrTiO$_3$ and FeSe/LaFeO$_3$. Our findings disentangle the contributions of interfacial EPC from dimensionality on enhancing $T_\mathrm{g}$ in FeSe/oxide interfaces, underscoring the importance of interfacial EPC in $T_\mathrm{g}$ enhancement. This FeSe/VO$_x$ interface also provides a platform for studying the interfacial superconductivity.

cond-mat.supr-con↗

arXiv2024

CoR-GS: Sparse-View 3D Gaussian Splatting via Co-Regularization

3D Gaussian Splatting (3DGS) creates a radiance field consisting of 3D Gaussians to represent a scene. With sparse training views, 3DGS easily suffers from overfitting, negatively impacting rendering. This paper introduces a new co-regularization perspective for improving sparse-view 3DGS. When training two 3D Gaussian radiance fields, we observe that the two radiance fields exhibit point disagreement and rendering disagreement that can unsupervisedly predict reconstruction quality, stemming from the randomness of densification implementation. We further quantify the two disagreements and demonstrate the negative correlation between them and accurate reconstruction, which allows us to identify inaccurate reconstruction without accessing ground-truth information. Based on the study, we propose CoR-GS, which identifies and suppresses inaccurate reconstruction based on the two disagreements: (1) Co-pruning considers Gaussians that exhibit high point disagreement in inaccurate positions and prunes them. (2) Pseudo-view co-regularization considers pixels that exhibit high rendering disagreement are inaccurate and suppress the disagreement. Results on LLFF, Mip-NeRF360, DTU, and Blender demonstrate that CoR-GS effectively regularizes the scene geometry, reconstructs the compact representations, and achieves state-of-the-art novel view synthesis quality under sparse training views.

cs.CV↗

arXiv2024

TalkingGaussian: Structure-Persistent 3D Talking Head Synthesis via Gaussian Splatting

Radiance fields have demonstrated impressive performance in synthesizing lifelike 3D talking heads. However, due to the difficulty in fitting steep appearance changes, the prevailing paradigm that presents facial motions by directly modifying point appearance may lead to distortions in dynamic regions. To tackle this challenge, we introduce TalkingGaussian, a deformation-based radiance fields framework for high-fidelity talking head synthesis. Leveraging the point-based Gaussian Splatting, facial motions can be represented in our method by applying smooth and continuous deformations to persistent Gaussian primitives, without requiring to learn the difficult appearance change like previous methods. Due to this simplification, precise facial motions can be synthesized while keeping a highly intact facial feature. Under such a deformation paradigm, we further identify a face-mouth motion inconsistency that would affect the learning of detailed speaking motions. To address this conflict, we decompose the model into two branches separately for the face and inside mouth areas, therefore simplifying the learning tasks to help reconstruct more accurate motion and structure of the mouth region. Extensive experiments demonstrate that our method renders high-quality lip-synchronized talking head videos, with better facial fidelity and higher efficiency compared with previous methods.

cs.CV↗

arXiv2024

Electric-field control of the perpendicular magnetization switching in ferroelectric/ferrimagnet heterostructures

Electric field control of the magnetic state in ferrimagnets holds great promise for developing spintronic devices due to low power consumption. Here, we demonstrate a non-volatile reversal of perpendicular net magnetization in a ferrimagnet by manipulating the electric-field driven polarization within the Pb (Zr0.2Ti0.8) O3 (PZT)/CoGd heterostructure. Electron energy loss spectra and X-ray absorption spectrum directly verify that the oxygen ion migration at the PZT/CoGd interface associated with reversing the polarization causes the enhanced/reduced oxidation in CoGd. Ab initio calculations further substantiate that the migrated oxygen ions can modulate the relative magnetization of Co/Gd sublattices, facilitating perpendicular net magnetization switching. Our findings offer an approach to effectively control ferrimagnetic net magnetization, holding significant implications for ferrimagnetic spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

Chern insulator phase realized in dual-gate-tuned MnBi2Te4 thin films grown by molecular beam epitaxy

The intrinsic magnetic order, large topological-magnetic gap and rich topological phases make MnBi2Te4 a wonderful platform to study exotic topological quantum states such as axion insulator and Chern insulator. To realize and manipulate these topological phases in a MnBi2Te4 thin film, precise manipulation of the electric field across the film is essential, which requires a dual-gate structure. In this work, we achieve dual-gate tuning of MnBi2Te4 thin films grown with molecular beam epitaxy on SrTiO3(111) substrates by applying the substrate and an AlOx layer as the gate dielectrics of bottom and top gates, respectively. Under magnetic field of 9T and temperature of 20 mK, the Hall and longitudinal resistivities of the films show inversed gate-voltage dependence, for both top- and bottom-gates, signifying the existence of the dissipationless edge state contributed by Chern insulator phase in the ferromagnetic configuration. The maximum of the Hall resistivity only reaches 0.8 h/e2, even with dual-gate tuning, probably due to the high density of bulk carriers introduced by secondary phases. In the antiferromagnetic state under zero magnetic field, the films show normal insulator behavior. The dual-gated MnBi2Te4 thin films lay the foundation for developing devices based on electrically tunable topological quantum states.

cond-mat.mtrl-sci↗

arXiv2024

Disorder-broadened phase boundary with enhanced amorphous superconductivity in pressurized In2Te5

As an empirical tool in materials science and engineering, the iconic phase diagram owes its robustness and practicality to the topological characteristics rooted in the celebrated Gibbs phase law (F = C - P + 2). When crossing the phase diagram boundary, the structure transition occurs abruptly, bringing about an instantaneous change in physical properties and limited controllability on the boundaries (F = 1). Here, we expand the sharp phase boundary to an amorphous transition region (F = 2) by partially disrupting the long-range translational symmetry, leading to a sequential crystalline-amorphous-crystalline (CAC) transition in a pressurized In2Te5 single crystal. Through detailed in-situ synchrotron diffraction, we elucidate that the phase transition stems from the rotation of immobile blocks [In2Te2]2+, linked by hinge-like [Te3]2- trimers. Remarkably, within the amorphous region, the amorphous phase demonstrates a notable 25 % increase of the superconducting transition temperature (Tc), while the carrier concentration remains relatively constant. Furthermore, we propose a theoretical framework revealing that the unconventional boost in amorphous superconductivity might be attributed to an intensified electron correlation, triggered by a disorder-augmented multifractal behavior. These findings underscore the potential of disorder and prompt further exploration of unforeseen phenomena on the phase boundaries.

cond-mat.supr-con↗

arXiv2024

Type-printable photodetector arrays for multichannel meta-infrared imaging

Multichannel meta-imaging, inspired by the parallel-processing capability of neuromorphic computing, offers significant advancements in resolution enhancement and edge discrimination in imaging systems, extending even into the mid- to far-infrared spectrum. Currently typical multichannel infrared imaging systems consist of separating optical gratings or merging multi-cameras, which require complex circuit design and heavy power consumption, hindering the implementation of advanced human-eye-like imagers. Here, we present a novel approach for printable graphene plasmonic photodetector arrays driven by a ferroelectric superdomain for multichannel meta-infrared imaging with enhanced edge discrimination. The fabricated photodetectors exhibited multiple spectral responses with zero-bias operation by directly rescaling the ferroelectric superdomain instead of reconstructing the separated gratings. We also demonstrated enhanced and faster shape classification (98.1%) and edge detection (98.2%) using our multichannel infrared images compared with single-channel detectors. Our proof-of-concept photodetector arrays simplify multichannel infrared imaging systems and hold great potential for applications in efficient edge detection in human-brain-type machine vision.

physics.optics↗

arXiv2024

A robust and tunable Luttinger liquid in correlated edge of transition-metal second-order topological insulator Ta$_2$Pd$_3$Te$_5$

The interplay between topology and interaction always plays an important role in condensed matter physics and induces many exotic quantum phases, while rare transition metal layered material (TMLM) has been proved to possess both. Here we report a TMLM Ta$_2$Pd$_3$Te$_5$ has the two-dimensional second-order topology (also a quadrupole topological insulator) with correlated edge states - Luttinger liquid. It is ascribed to the unconventional nature of the mismatch between charge- and atomic- centers induced by a remarkable double-band inversion. This one-dimensional protected edge state preserves the Luttinger liquid behavior with robustness and universality in scale from micro- to macro- size, leading to a significant anisotropic electrical transport through two-dimensional sides of bulk materials. Moreover, the bulk gap can be modulated by the thickness, resulting in an extensive-range phase diagram for Luttinger liquid. These provide an attractive model to study the interaction and quantum phases in correlated topological systems.

cond-mat.mes-hall↗

arXiv2024

PANet: A Physics-guided Parametric Augmentation Net for Image Dehazing by Hazing

Image dehazing faces challenges when dealing with hazy images in real-world scenarios. A huge domain gap between synthetic and real-world haze images degrades dehazing performance in practical settings. However, collecting real-world image datasets for training dehazing models is challenging since both hazy and clean pairs must be captured under the same conditions. In this paper, we propose a Physics-guided Parametric Augmentation Network (PANet) that generates photo-realistic hazy and clean training pairs to effectively enhance real-world dehazing performance. PANet comprises a Haze-to-Parameter Mapper (HPM) to project hazy images into a parameter space and a Parameter-to-Haze Mapper (PHM) to map the resampled haze parameters back to hazy images. In the parameter space, we can pixel-wisely resample individual haze parameter maps to generate diverse hazy images with physically-explainable haze conditions unseen in the training set. Our experimental results demonstrate that PANet can augment diverse realistic hazy images to enrich existing hazy image benchmarks so as to effectively boost the performances of state-of-the-art image dehazing models.

cs.CV↗

arXiv2024

When Semantic Segmentation Meets Frequency Aliasing

Despite recent advancements in semantic segmentation, where and what pixels are hard to segment remains largely unexplored. Existing research only separates an image into easy and hard regions and empirically observes the latter are associated with object boundaries. In this paper, we conduct a comprehensive analysis of hard pixel errors, categorizing them into three types: false responses, merging mistakes, and displacements. Our findings reveal a quantitative association between hard pixels and aliasing, which is distortion caused by the overlapping of frequency components in the Fourier domain during downsampling. To identify the frequencies responsible for aliasing, we propose using the equivalent sampling rate to calculate the Nyquist frequency, which marks the threshold for aliasing. Then, we introduce the aliasing score as a metric to quantify the extent of aliasing. While positively correlated with the proposed aliasing score, three types of hard pixels exhibit different patterns. Here, we propose two novel de-aliasing filter (DAF) and frequency mixing (FreqMix) modules to alleviate aliasing degradation by accurately removing or adjusting frequencies higher than the Nyquist frequency. The DAF precisely removes the frequencies responsible for aliasing before downsampling, while the FreqMix dynamically selects high-frequency components within the encoder block. Experimental results demonstrate consistent improvements in semantic segmentation and low-light instance segmentation tasks. The code is available at: https://github.com/Linwei-Chen/Seg-Aliasing.

cs.CV↗

arXiv2024

DNGaussian: Optimizing Sparse-View 3D Gaussian Radiance Fields with Global-Local Depth Normalization

Radiance fields have demonstrated impressive performance in synthesizing novel views from sparse input views, yet prevailing methods suffer from high training costs and slow inference speed. This paper introduces DNGaussian, a depth-regularized framework based on 3D Gaussian radiance fields, offering real-time and high-quality few-shot novel view synthesis at low costs. Our motivation stems from the highly efficient representation and surprising quality of the recent 3D Gaussian Splatting, despite it will encounter a geometry degradation when input views decrease. In the Gaussian radiance fields, we find this degradation in scene geometry primarily lined to the positioning of Gaussian primitives and can be mitigated by depth constraint. Consequently, we propose a Hard and Soft Depth Regularization to restore accurate scene geometry under coarse monocular depth supervision while maintaining a fine-grained color appearance. To further refine detailed geometry reshaping, we introduce Global-Local Depth Normalization, enhancing the focus on small local depth changes. Extensive experiments on LLFF, DTU, and Blender datasets demonstrate that DNGaussian outperforms state-of-the-art methods, achieving comparable or better results with significantly reduced memory cost, a $25 \times$ reduction in training time, and over $3000 \times$ faster rendering speed.

cs.CV↗

arXiv2024

Ultralarge polarization in ferroelectric hafnia-based thin films

Hafnia-based ferroelectrics have become a valuable class of electronic functional materials at the nanoscale, showing great potential for next-generation memory and logic devices. However, more robust ferroelectric properties and better understanding of the polarization mechanisms are currently needed both in technology and science. Herein, we report the properties of oxygen-deficient Hf0.5Zr0.5O2 films with ultralarge remanent polarization (Pr) of 387 uC cm-2 at room temperature (1 kHz). Structure characterizations identify a new ferroelectric monoclinic Pc phase in these Hf0.5Zr0.5O2 films. The in-situ STEM measurements evidence polar displacements of the oxygen atoms, which move up and down in the Pc structure under applied DC bias fields, showing a huge displacement (1.6 A). DFT calculations optimized the Pc structure and also predicted a large polarization. The coexistence of the ferroelectric monoclinic (Pc) phases and orthorhombic (Pca21) is responsible for this superior ferroelectric properties. These findings are promising for hafnia-based ferroelectric applications in integrated ferroelectric devices, energy harvesting and actuators, etc.

cond-mat.mtrl-sci↗