arXiv subjects

Lilin Wang

Publications and source records attributed to Lilin Wang.

27 records · Page 2Linked to original sources

arXiv2020

In situ visualization of tip undercooling and lamellar microstructure evolution of sea ice with manipulated orientation

Sea ice growth with lamellar microstructure containing brine channels has been extensively investigated. However, the quantitative growth information of sea ice remains lack due to the uncontrolled crystalline orientation in previous investigations. For the first time, we in-situ observed the unidirectional growth of lamellar sea ice with well-manipulated ice crystal orientation and visualized tip undercooling of sea ice. A semi-empirical model was proposed to quantitatively address the variation of tip undercooling with growth velocity and salinity and compared with a very recent analytical model. With the real-time observation, interesting phenomena of doublon tip in cellular ice growth and growth direction shift of ice dendritic tip were discovered for the first time, which are attributed to the complex solutal diffusion and anisotropic interface kinetics in sea ice growth. The quantitative experiment provides a clear micro scenario of sea ice growth, and will promote relevant investigations of sea ice in terms of the theoretical approach to describing the diffusion field around faceted ice dendritic tip.

cond-mat.mtrl-sci↗

arXiv2020

Single ice crystal growth with controlled orientation during directional freezing

Ice growth has attracted great attention for its capability of fabricating hierarchically porous microstructure. However, the formation of tilted lamellar microstructure during freezing needs to be reconsidered due to the limited control of ice orientation with respect to thermal gradient during in-situ observations, which can greatly enrich our insight into architectural control of porous biomaterials. This paper provides an in-situ study of solid/liquid interface morphology evolution of directionally solidified single crystal ice with its C-axis (optical axis) perpendicular to directions of both thermal gradient and incident light in poly (vinyl alcohol, PVA) solutions. Misty morphology and V-shaped lamellar morphology were clearly observed in-situ for the first time. Quantitative characterizations on lamellar spacing, tilt angle and tip undercooling of lamellar ice platelets provide a clearer insight into the inherent ice growth habit in polymeric aqueous systems and are suggested exert significant impact on future design and optimization in porous biomaterials.

cond-mat.mtrl-sci↗

arXiv2017

Speed-dependent ice bandings in freezing colloidal suspensions

Formation mechanism of speed-dependent ice bandings in freezing colloidal suspensions, of significance in frost heaving and materials science, remains a mystery. With quantitative experiments, we propose a possible mechanism of speed-dependent ice bandings by focusing on the particle packing density and dynamic interface undercooling. The particle packing density ahead of the freezing interface decreases with increasing pulling speeds, attributed to the speed-dependent packing of particles. Through affecting the curvature undercooling of pore ices, the speed-dependent packing of particles can be used to explain speed-dependent thicknesses of ice bandings. The dynamic interface undercooling was obtained to explore curvature undercooling of pore ices and quantitative details of transient interface positions, speeds and undercooling were given. All the evidences imply that the speed-dependent particle packing and dynamic interface undercooling are responsible for speed-dependent ice bandings.

cond-mat.mtrl-sci↗

arXiv2017

Thermodynamics of interface in the freezing of colloidal suspensions: from macroscale to the microscale

A long controversy of ice lensing exists in the research of frost heave. By elucidating the mechanical and thermodynamics equilibria at the interface, we present the thermodynamics of the water/ice interface from macroscale to microscale for the freezing of colloidal suspensions. The application of the Clapeyron equation is confirmed both at macroscale to microscale via curvature effect. The thermodynamics at the interface indicates the initial of ice lensing/banding from the growth of pore ice, determined by the critical curvature undercooling instead of the critical fracture of frozen fringe. It is also proposed that the packing status of the porous structure in the particle layer ahead of the water/ice interface determines the ice lensing behaviors. The results presented here are different scenarios from previous investigations of freezing colloidal suspensions, and may shed light on the researches of this area.

cond-mat.soft↗

arXiv2017

Dynamic particle packing in freezing colloidal suspensions

In the field of freezing colloidal suspensions, it is important to understand the particle-scale behavior of particle packing. Here, we reveal the dynamics of particle packing by identifying the behavior of each single particle in situ. The typical pattern consists of locally ordered clusters and amorphous defects. The microscopic mechanism of pattern formation is ascribed to the non-equilibrium particle-packing process on the particle scale, described with the Péclet number. The macroscopic migration of a particle layer is also revealed by an analytical model involving parameters of freezing speed and initial volume fraction of particles.

cond-mat.mtrl-sci↗

arXiv2016

Interfacial undercooling in the solidification of colloidal suspensions-analyses with quantitative measurements

Interfacial undercooling is of significant importance on microscopic pattern formation in the solidification of colloidal suspensions. Two kinds of interfacial undercooling are supposed to be involved in freezing colloidal suspensions, i.e. solute constitutional supercooling (SCS) caused by additives in the solvent and particulate constitutional supercooling (PCS) caused by particles. However, quantitatively identification of the interfacial undercooling of freezing colloidal suspensions is still absent and it is still unknown which undercooling is dominant. The revealing of interfacial undercooling is closely related to the design of ice-templating porous materials. Based on quantitative experimental measurements, we show that the interfacial undercooling mainly comes from SCS caused by the additives in the solvent, while the PCS can be ignored. This finding implies that the PCS theory is not the fundamental physical mechanism for patterning in the solidification of colloidal suspensions. Instead, the patterns in ice-templating method can be controlled effectively by adjusting the additives.

cond-mat.mtrl-sci↗

arXiv2016

Can secondary nucleation exist in ice banding of freezing colloidal suspensions?

The formation mechanism of ice banding in the system of freezing colloidal suspensions, which is of significance in frost heaving, ice-templating porous materials and biological materials, still remains a mystery. Recently, the theory of secondary nucleation and growth of ice has been proposed to explain the emergence of a new ice lens. However, this theory has not been quantitatively examined. Here, we quantitatively measured the initial interfacial undercooling of a new ice lens and the nucleation undercoolings of suspensions. We found that the interfacial undercooling can not satisfy the nucleation undercooling of ice and hence disprove the secondary nucleation mechanism for ice banding.

cond-mat.mtrl-sci↗

arXiv2016

Interface instability modes in freezing colloidal suspensions - revealed from onset of planar instability

Freezing colloidal suspensions widely exists in nature and industry. Interface instability has attracted much attention for the understandings of the pattern formation in freezing colloidal suspensions. However, the interface instability modes, the origin of the ice banding or ice lamellae, are still unclear. In-situ experimental observation of the onset of interface instability is still absent up to now. Here, by directly imaging the initial transient stage of planar interface instability in directional freezing colloidal suspensions, we proposed three interface instability modes, Mullins-Sekerka instability, global split instability and local split instability. All the three instability modes come from the competition of the solute boundary layer and the particle boundary layer, which only can be revealed from the initial transient stage of planar instability in directional freezing.

cond-mat.mtrl-sci↗

arXiv2015

In situ observation the interface undercooling of freezing colloidal suspensions with differential visualization method

Interface undercooling is one of the most significant parameters in the solidification of colloidal suspensions. However, quantitative measurement of interface undercooling of colloidal suspensions is still a challenge. Here, a new experimental facility and gauging method are designed to directly reveal the interface undercooling on both static and dynamic cases. The interface undercooling is visualized through the discrepancy of solid/liquid interface positions between the suspensions and its solvent in a thermal gradient apparatus. The resolutions of the experimental facility and gauging method are proved to be 0.01 K. The high precision of the method comes from the principle of converting temperature measurement into distance measurement in the thermal gradient platform. Moreover, both static and dynamic interface undercoolings can be quantitatively measured.

cond-mat.mtrl-sci↗