arXiv subjects

Lijun Han

Publications and source records attributed to Lijun Han.

15 recordsLinked to original sources

arXiv2026

World-Model-Augmented Visual Locomotion for Humanoids on Foothold-Constrained Terrain

Foothold-constrained terrain is characterized by sparse, discontinuous, or geometrically restricted feasible foot contacts, as encountered on stepping stones, across gaps, and on narrow stair treads. On such terrain, a single misstep often leaves little room to recover, so policies that base foot-placement decisions primarily on the immediately visible terrain are prone to failure. We ask whether a learned predictive summary of near-future observations and rewards can provide the anticipatory information required in such settings. We present World-Model-Augmented Visual Locomotion (WM-LOCO), which jointly trains a recurrent world model and a PPO policy. Conditioned on proprioception and a single onboard depth image, the world model produces a predictive recurrent feature that guides the policy, without explicit foothold labels. In simulation, WM-LOCO succeeds on gaps and stepping stones where a matched baseline fails completely, and matches the baseline's success rate on stairs while improving stride efficiency and reducing pelvis acceleration. We deploy the same policy onboard a physical Unitree G1 humanoid using onboard proprioception and a single depth stream; it traverses all three terrain classes with an average success rate of 93.3%.

cs.RO↗

arXiv2026

ExtraGS: Enhancing Endoscopic View Extrapolation via Diffusion-Guided 3D Gaussian Splatting

Robot-assisted minimally invasive surgery (MIS) critically depends on reliable endoscopic perception for navigation and safety. However, conventional endoscopes provide only a limited field of view, leaving large portions of the surrounding anatomy unobserved. Recent neural rendering approaches, such as Neural Radiance Fields and 3D Gaussian Splatting, enable novel view synthesis from endoscopic videos, but their reliance on sparse observations often leads to severe artifacts when extrapolating beyond the training trajectory. In this work, we propose ExtraGS, a framework for enhancing endoscopic view extrapolation through diffusion-guided 3D Gaussian Splatting. Starting from an initial reconstruction, we introduce an uncertainty-guided virtual camera sampling strategy to actively explore blind spots and maximize information gain. The rendered views from these sampled locations are refined using a diffusion model to recover plausible anatomical structures, producing pseudo-observations that guide further optimization. To prevent the generated content from degrading reliable regions, we adopt a confidence-weighted fine-tuning strategy when incorporating these pseudo-observations. Extensive experiments on multiple public endoscopic datasets demonstrate that ExtraGS significantly reduces extrapolation artifacts and achieves state-of-the-art performance in endoscopic novel view synthesis.

cs.CV↗

arXiv2026

X-Lens: Real-Time Metric Depth Estimation with Heterogeneous Cameras

We present X-lens, a compact feed-forward model for metric depth estimation from a variable number of calibrated fisheye and pinhole views. To support real-time downstream perception, X-lens is built around a geometry-aware heterogeneous camera formulation with two key components. Learnable calibration tokens provide a coarse alignment between fisheye and pinhole projective spaces, while a Jacobian-parameterized distortion bias injected into cross-attention models local projection changes and promotes cross-camera consistency, enabling robust generalization with only 0.04B parameters and up to 41 FPS. The model predicts dense depth together with a global metric scale, avoiding auxiliary reconstruction targets that increase computation and optimization complexity. To learn such cross-camera generalization at scale and depth, X-lens is trained on multiple public datasets and OmniScene, our newly released large-scale synthetic dataset containing approximately 266K synchronized six-view frames, 1.7M individual images, and 103 indoor and outdoor scenes. Extensive experiments on both real-world and synthetic indoor and outdoor datasets demonstrate superior heterogeneous-camera metric depth accuracy, reducing AbsRel by 25.4\% on OmniScene-Full over the strongest baseline while using 88.9\% fewer parameters, with competitive performance on conventional fisheye-only and pinhole-only settings.

cs.CV↗

arXiv2026

Wearing A Coat: Dual-Arm Robot-Assisted Dressing with Differentiable Clothing Simulation

The development of assistive robots for dressing tasks serves to augment human convenience and improve the quality of life for individuals with physical impairments. However, due to the intricate contact interactions between garments and the human limbs during dressing, most robot-assisted dressing algorithms treat clothing as an assembly of discrete segments, thereby struggling to manage the partial worn garments under contact constraints. To overcome this challenge, we propose a novel robotic dressing control algorithm that integrates realtime differentiable clothing simulation. The simulation algorithm employs explicit iterative scheme with intentionally introduced higher-order perturbations to enhance computational efficiency while maintaining stability under large time-step conditions. Through simulation, we resolve the garment state under contact constraints, which then enables a multi-phase control strategy for successful coat dressing assistance. To further improve real-time performance, we introduce a constrained local model along with its corresponding optimization solver, permitting high-frequency local compensation for the differentiable simulation based global controller. Finally, we experimentally validate our approach through both simulated and physical dressing scenarios, conclusively demonstrating its feasibility and efficacy

cs.RO↗

arXiv2026

Ensuring Interaction Safety in Multitask Exoskeleton Control: A Simulation-Trained Variable Impedance Framework

Wearable exoskeletons can augment human phys ical capabilities during complex activities. However, ensuring adaptation across diverse tasks while guaranteeing interaction safety remains a critical challenge. To address this, a simulation trained variable impedance control approach with stability guarantees is proposed. First, a simulation-based human exoskeleton motion data generation pipeline is established, utilizing Proximal Policy Optimization (PPO) to synthesize human muscle activations while the exoskeleton provides direct compensation for human biological joint torques. Subsequently, the generated dataset is used to train a dual modality policy that fuses semantic instructions with proprioceptive history, enabling the prediction of reference trajectories and variable impedance gains for nine different motion tasks. To guarantee safety, the network outputs are constrained by a stability criterion derived from Lyapunov stability theory, which bounds stiffness variations to ensure the asymptotic stability of the coupled system. Experimental results indicate that the proposed framework reduces metabolic cost in real-world scenarios com pared with standard baseline methods. These findings suggest the feasibility of the proposed framework for safe, multitask exoskeleton control.

cs.RO↗

arXiv2026

From Reach to Insert: Tactile-Augmented Precision Assembly under Sub-Millimeter Tolerances

High-precision assembly frequently involves tight-tolerance insertions, where even slight pose errors can cause jamming or excessive interaction forces, making robust and safe insertion policies difficult to obtain. This paper proposes a tactile-augmented two-stage method that combines Imitation Learning (IL) and Reinforcement Learning (RL) for precision insertion tasks. In the first stage, IL learns a reaching policy with position generalization that grasps the peg and brings it to the vicinity of the target region. In the second stage, RL executes the insertion and enables recovery from failures during contact-rich interactions. To better exploit tactile feedback, we introduce tactile group sampling to increase coverage of critical contact segments during training, and design a tactile critic to more accurately evaluate policy values, improving insertion performance while maintaining low contact forces. We conduct systematic experiments across five hole geometries and three clearance settings. Results show that our method substantially improves insertion performance across all settings; under the most challenging 0.05\,mm clearance, it achieves a 67\% success rate while keeping contact forces low, reducing the maximum interaction force by 60\% and torque by 44\%, thereby validating both effectiveness and safety for precision assembly.

cs.RO↗

arXiv2026

NRGS-SLAM: Monocular Non-Rigid SLAM for Endoscopy via Deformation-Aware 3D Gaussian Splatting

Visual simultaneous localization and mapping (V-SLAM) is a fundamental capability for autonomous perception and navigation. However, endoscopic scenes violate the rigidity assumption due to persistent soft-tissue deformations, creating a strong coupling ambiguity between camera ego-motion and intrinsic deformation. Although recent monocular non-rigid SLAM methods have made notable progress, they often lack effective decoupling mechanisms and rely on sparse or low-fidelity scene representations, which leads to tracking drift and limited reconstruction quality. To address these limitations, we propose NRGS-SLAM, a monocular non-rigid SLAM system for endoscopy based on 3D Gaussian Splatting. To resolve the coupling ambiguity, we introduce a deformation-aware 3D Gaussian map that augments each Gaussian primitive with a learnable deformation probability, optimized via a Bayesian self-supervision strategy without requiring external non-rigidity labels. Building on this representation, we design a deformable tracking module that performs robust coarse-to-fine pose estimation by prioritizing low-deformation regions, followed by efficient per-frame deformation updates. A carefully designed deformable mapping module progressively expands and refines the map, balancing representational capacity and computational efficiency. In addition, a unified robust geometric loss incorporates external geometric priors to mitigate the inherent ill-posedness of monocular non-rigid SLAM. Extensive experiments on multiple public endoscopic datasets demonstrate that NRGS-SLAM achieves more accurate camera pose estimation (up to 50\% reduction in RMSE) and higher-quality photo-realistic reconstructions than state-of-the-art methods. Comprehensive ablation studies further validate the effectiveness of our key design choices. Source code will be publicly available upon paper acceptance.

cs.CV↗

arXiv2026

4D Monocular Surgical Reconstruction under Arbitrary Camera Motions

Reconstructing deformable surgical scenes from endoscopic videos is challenging and clinically important. Recent state-of-the-art methods based on implicit neural representations or 3D Gaussian splatting have made notable progress. However, most are designed for deformable scenes with fixed endoscope viewpoints and rely on stereo depth priors or accurate structure-from-motion for initialization and optimization, limiting their ability to handle monocular sequences with large camera motion in real clinical settings. To address this, we propose Local-EndoGS, a high-quality 4D reconstruction framework for monocular endoscopic sequences with arbitrary camera motion. Local-EndoGS introduces a progressive, window-based global representation that allocates local deformable scene models to each observed window, enabling scalability to long sequences with substantial motion. To overcome unreliable initialization without stereo depth or accurate structure-from-motion, we design a coarse-to-fine strategy integrating multi-view geometry, cross-window information, and monocular depth priors, providing a robust foundation for optimization. We further incorporate long-range 2D pixel trajectory constraints and physical motion priors to improve deformation plausibility. Experiments on three public endoscopic datasets with deformable scenes and varying camera motions show that Local-EndoGS consistently outperforms state-of-the-art methods in appearance quality and geometry. Ablation studies validate the effectiveness of our key designs. Code will be released upon acceptance at: https://github.com/IRMVLab/Local-EndoGS.

cs.CV↗

arXiv2025

A Shared Control Framework for Mobile Robots with Planning-Level Intention Prediction

In mobile robot shared control, effectively understanding human motion intention is critical for seamless human-robot collaboration. This paper presents a novel shared control framework featuring planning-level intention prediction. A path replanning algorithm is designed to adjust the robot's desired trajectory according to inferred human intentions. To represent future motion intentions, we introduce the concept of an intention domain, which serves as a constraint for path replanning. The intention-domain prediction and path replanning problems are jointly formulated as a Markov Decision Process and solved through deep reinforcement learning. In addition, a Voronoi-based human trajectory generation algorithm is developed, allowing the model to be trained entirely in simulation without human participation or demonstration data. Extensive simulations and real-world user studies demonstrate that the proposed method significantly reduces operator workload and enhances safety, without compromising task efficiency compared with existing assistive teleoperation approaches.

cs.RO↗

arXiv2025

Motion Adaptation Across Users and Tasks for Exoskeletons via Meta-Learning

Wearable exoskeletons can augment human strength and reduce muscle fatigue during specific tasks. However, developing personalized and task-generalizable assistance algorithms remains a critical challenge. To address this, a meta-imitation learning approach is proposed. This approach leverages a task-specific neural network to predict human elbow joint movements, enabling effective assistance while enhancing generalization to new scenarios. To accelerate data collection, full-body keypoint motions are extracted from publicly available RGB video and motion-capture datasets across multiple tasks, and subsequently retargeted in simulation. Elbow flexion trajectories generated in simulation are then used to train the task-specific neural network within the model-agnostic meta-learning (MAML) framework, which allows the network to rapidly adapt to novel tasks and unseen users with only a few gradient updates. The adapted network outputs personalized references tracked by a gravity-compensated PD controller to ensure stable assistance. Experimental results demonstrate that the exoskeleton significantly reduces both muscle activation and metabolic cost for new users performing untrained tasks, compared to performing without exoskeleton assistance. These findings suggest that the proposed framework effectively improves task generalization and user adaptability for wearable exoskeleton systems.

cs.RO↗

arXiv2025

Design and Control of an Actively Morphing Quadrotor with Vertically Foldable Arms

In this work, we propose a novel quadrotor design capable of folding its arms vertically to grasp objects and navigate through narrow spaces. The transformation is controlled actively by a central servomotor, gears, and racks. The arms connect the motor bases to the central frame, forming a parallelogram structure that ensures the propellers maintain a constant orientation during morphing. In its stretched state, the quadrotor resembles a conventional design, and when contracted, it functions as a gripper with grasping components emerging from the motor bases. To mitigate disturbances during transforming and grasping payloads, we employ an adaptive sliding mode controller with a disturbance observer. After fully folded, the quadrotor frame shrinks to 67% of its original size. The control performance and versatility of the morphing quadrotor are validated through real-world experiments.

cs.RO↗

arXiv2025

FreeDriveRF: Monocular RGB Dynamic NeRF without Poses for Autonomous Driving via Point-Level Dynamic-Static Decoupling

Dynamic scene reconstruction for autonomous driving enables vehicles to perceive and interpret complex scene changes more precisely. Dynamic Neural Radiance Fields (NeRFs) have recently shown promising capability in scene modeling. However, many existing methods rely heavily on accurate poses inputs and multi-sensor data, leading to increased system complexity. To address this, we propose FreeDriveRF, which reconstructs dynamic driving scenes using only sequential RGB images without requiring poses inputs. We innovatively decouple dynamic and static parts at the early sampling level using semantic supervision, mitigating image blurring and artifacts. To overcome the challenges posed by object motion and occlusion in monocular camera, we introduce a warped ray-guided dynamic object rendering consistency loss, utilizing optical flow to better constrain the dynamic modeling process. Additionally, we incorporate estimated dynamic flow to constrain the pose optimization process, improving the stability and accuracy of unbounded scene reconstruction. Extensive experiments conducted on the KITTI and Waymo datasets demonstrate the superior performance of our method in dynamic scene modeling for autonomous driving.

cs.CV↗

arXiv2025

Learning a General Model: Folding Clothing with Topological Dynamics

The high degrees of freedom and complex structure of garments present significant challenges for clothing manipulation. In this paper, we propose a general topological dynamics model to fold complex clothing. By utilizing the visible folding structure as the topological skeleton, we design a novel topological graph to represent the clothing state. This topological graph is low-dimensional and applied for complex clothing in various folding states. It indicates the constraints of clothing and enables predictions regarding clothing movement. To extract graphs from self-occlusion, we apply semantic segmentation to analyze the occlusion relationships and decompose the clothing structure. The decomposed structure is then combined with keypoint detection to generate the topological graph. To analyze the behavior of the topological graph, we employ an improved Graph Neural Network (GNN) to learn the general dynamics. The GNN model can predict the deformation of clothing and is employed to calculate the deformation Jacobi matrix for control. Experiments using jackets validate the algorithm's effectiveness to recognize and fold complex clothing with self-occlusion.

cs.RO↗

arXiv2023

Efficient Robot Skill Learning with Imitation from a Single Video for Contact-Rich Fabric Manipulation

Classical policy search algorithms for robotics typically require performing extensive explorations, which are time-consuming and expensive to implement with real physical platforms. To facilitate the efficient learning of robot manipulation skills, in this work, we propose a new approach comprised of three modules: (1) learning of general prior knowledge with random explorations in simulation, including state representations, dynamic models, and the constrained action space of the task; (2) extraction of a state alignment-based reward function from a single demonstration video; (3) real-time optimization of the imitation policy under systematic safety constraints with sampling-based model predictive control. This solution results in an efficient one-shot imitation-from-video strategy that simplifies the learning and execution of robot skills in real applications. Specifically, we learn priors in a scene of a task family and then deploy the policy in a novel scene immediately following a single demonstration, preventing time-consuming and risky explorations in the environment. As we do not make a strong assumption of dynamic consistency between the scenes, learning priors can be conducted in simulation to avoid collecting data in real-world circumstances. We evaluate the effectiveness of our approach in the context of contact-rich fabric manipulation, which is a common scenario in industrial and domestic tasks. Detailed numerical simulations and real-world hardware experiments reveal that our method can achieve rapid skill acquisition for challenging manipulation tasks.

cs.RO↗

arXiv2021

Action Planning for Packing Long Linear Elastic Objects into Compact Boxes with Bimanual Robotic Manipulation

In this paper, we propose a new action planning approach to automatically pack long linear elastic objects into common-size boxes with a bimanual robotic system. For that, we developed a hybrid geometric model to handle large-scale occlusions combining an online vision-based method and an offline reference template. Then, a reference point generator is introduced to automatically plan the reference poses for the predesigned action primitives. Finally, an action planner integrates these components enabling the execution of high-level behaviors and the accomplishment of packing manipulation tasks. To validate the proposed approach, we conducted a detailed experimental study with multiple types and lengths of objects and packing boxes.

cs.RO↗