arXiv Science⌕ Search

arXiv subjects

Ligui Yang

Publications and source records attributed to Ligui Yang.

2 recordsLinked to original sources
arXiv2025

Axial Behaviour of Pre-Damaged RC Short Columns Retrofitted with Square Corrugated Steel Jackets

This study proposes a strengthening method employing square corrugated steel jackets as external confinement, which significantly enhances both the bearing capacity and ductility of existing reinforced concrete (RC) columns. Axial compression tests were conducted on ten short column specimens to evaluate the effects of corrugated steel thickness (1.6, 2.0, and 2.7 mm), preloading level before jacketing (40%, 60%, and 100% of the original capacity), and connection type (welding vs. bolting). A computational model was developed to predict the ultimate bearing capacity of the strengthened sections. The main findings are as follows: (1) The corrugated steel jackets increased the ultimate bearing capacity of the existing RC columns by 34.6% to 67.3%. (2) Given the relatively low confinement efficiency in square sections, thinner corrugated steel plates can be used in a material-efficient manner to achieve comparable strengthening effects. (3) Fully welded connections between corrugated plates induce less stress concentration and provide better transverse confinement effectiveness compared to bolted connections. (4) In a pre-unloaded column, greater existed damage causes concrete softening and increased lateral expansion under re-compression. This dilation promotes a tighter interaction between the core concrete and the outer jacket, activating stronger passive confinement after being jacketed. (5) The low longitudinal stresses in the jacket indicate that its primary role is to provide lateral confinement rather than to resist axial loads directly. (6) It is recommended to employ a calculation method that accounts for both pre-damage and confinement effects to ensure a conservative and reliable design of corrugated steel-jacketed RC columns with pre-damage.

math.NA↗
arXiv2025

Finite Element Analysis of Shear Lag Effect in Long-Span Single-Box Continuous Rigid Bridges

As the span and width of continuous rigid bridges increase, the complexity of the spatial forces acting on these structures also grows, challenging traditional design methods. Primary beam theory often fails to accurately predict the stresses in the bridge girder, leading to potential overestimation of the ultimate capacity of these bridges. This study addresses this gap by developing a detailed finite element (FE) model of a continuous rigid bridge using ABAQUS, which accounts for the complex 3D geometry, construction procedures, and nonlinear material interactions. A loading test on a 210-meter continuous rigid bridge is performed to validate the model, with the measured strain and deflection data closely matching the FE simulation results. The study also examines stress distributions under constant and live loads, as well as the shear lag coefficients of the main girder. Through parametric analysis, we explore the effects of varying the width-to-span and height-to-width ratios. The results reveal that both a wider box girder and a larger span significantly amplify the shear lag effect in the bridge girder. The findings enhance the understanding of stress distribution in large-scale rigid bridges and provide critical insights for more accurate design and as-sessment of such structures.

math.NA↗