arXiv subjects

Ligang Liu

Publications and source records attributed to Ligang Liu.

At least 55 records · Page 3Linked to original sources

arXiv2025

Asymptotic analysis and design of shell-based thermal lattice metamaterials

We present a rigorous asymptotic analysis framework for investigating the thermal conductivity of shell lattice metamaterials, extending prior work from mechanical stiffness to heat transfer. Central to our analysis is a new metric, the asymptotic directional conductivity (ADC), which captures the leading-order influence of the middle surface geometry on the effective thermal conductivity in the vanishing-thickness limit. A convergence theorem is established for evaluating ADC, along with a sharp upper bound and the necessary and sufficient condition for achieving this bound. These results provide the first theoretical justification for the optimal thermal conductivity of triply periodic minimal surfaces. Furthermore, we show that ADC yields a third-order approximation to the effective conductivity of shell lattices at low volume fractions. To support practical design applications, we develop a discrete algorithm for computing and optimizing ADC over arbitrary periodic surfaces. Numerical results confirm the theoretical predictions and demonstrate the robustness and effectiveness of the proposed optimization algorithm.

math.AP↗

arXiv2025

Polynomial 2D Green Coordinates for High-order Cages

We propose conformal polynomial coordinates for 2D closed high-order cages, which consist of polynomial curves of any order. The coordinates enable the transformation of the input polynomial curves into polynomial curves of any order. We extend the classical 2D Green coordinates to define our coordinates, thereby leading to cage-aware conformal harmonic deformations. We extensively test our method on various 2D deformations, allowing users to manipulate the \Bezier control points to easily generate the desired deformation.

cs.CG↗

arXiv2025

Asymptotic analysis and design of linear elastic shell lattice metamaterials

We present an asymptotic analysis of shell lattice metamaterials based on Ciarlet's shell theory, introducing a new metric--asymptotic directional stiffness (ADS)--to quantify how the geometry of the middle surface governs the effective stiffness. We prove a convergence theorem that rigorously characterizes ADS and establishes its upper bound, along with necessary and sufficient condition for achieving it. As a key result, our theory provides the first rigorous explanation for the high bulk modulus observed in Triply Periodic Minimal Surfaces (TPMS)-based shell lattices. To optimize ADS on general periodic surfaces, we propose a triangular-mesh-based discretization and shape optimization framework. Numerical experiments validate the theoretical findings and demonstrate the effectiveness of the optimization under various design objectives. Our implementation is available at https://github.com/lavenklau/minisurf.

math.AP↗

arXiv2025

MASH: Masked Anchored SpHerical Distances for 3D Shape Representation and Generation

We introduce Masked Anchored SpHerical Distances (MASH), a novel multi-view and parametrized representation of 3D shapes. Inspired by multi-view geometry and motivated by the importance of perceptual shape understanding for learning 3D shapes, MASH represents a 3D shape as a collection of observable local surface patches, each defined by a spherical distance function emanating from an anchor point. We further leverage the compactness of spherical harmonics to encode the MASH functions, combined with a generalized view cone with a parameterized base that masks the spatial extent of the spherical function to attain locality. We develop a differentiable optimization algorithm capable of converting any point cloud into a MASH representation accurately approximating ground-truth surfaces with arbitrary geometry and topology. Extensive experiments demonstrate that MASH is versatile for multiple applications including surface reconstruction, shape generation, completion, and blending, achieving superior performance thanks to its unique representation encompassing both implicit and explicit features.

cs.CV↗

arXiv2025

SUPRA: Subspace Parameterized Attention for Neural Operator on General Domains

Neural operators are efficient surrogate models for solving partial differential equations (PDEs), but their key components face challenges: (1) in order to improve accuracy, attention mechanisms suffer from computational inefficiency on large-scale meshes, and (2) spectral convolutions rely on the Fast Fourier Transform (FFT) on regular grids and assume a flat geometry, which causes accuracy degradation on irregular domains. To tackle these problems, we regard the matrix-vector operations in the standard attention mechanism on vectors in Euclidean space as bilinear forms and linear operators in vector spaces and generalize the attention mechanism to function spaces. This new attention mechanism is fully equivalent to the standard attention but impossible to compute due to the infinite dimensionality of function spaces. To address this, inspired by model reduction techniques, we propose a Subspace Parameterized Attention (SUPRA) neural operator, which approximates the attention mechanism within a finite-dimensional subspace. To construct a subspace on irregular domains for SUPRA, we propose using the Laplacian eigenfunctions, which naturally adapt to domains' geometry and guarantee the optimal approximation for smooth functions. Experiments show that the SUPRA neural operator reduces error rates by up to 33% on various PDE datasets while maintaining state-of-the-art computational efficiency.

cs.LG↗

arXiv2025

PointNorm-Net: Self-Supervised Normal Prediction of 3D Point Clouds via Multi-Modal Distribution Estimation

Although supervised deep normal estimators have recently shown impressive results on synthetic benchmarks, their performance deteriorates significantly in real-world scenarios due to the domain gap between synthetic and real data. Building high-quality real training data to boost those supervised methods is not trivial because point-wise annotation of normals for varying-scale real-world 3D scenes is a tedious and expensive task. This paper introduces PointNorm-Net, the first self-supervised deep learning framework to tackle this challenge. The key novelty of PointNorm-Net is a three-stage multi-modal normal distribution estimation paradigm that can be integrated into either deep or traditional optimization-based normal estimation frameworks. Extensive experiments show that our method achieves superior generalization and outperforms state-of-the-art conventional and deep learning approaches across three real-world datasets that exhibit distinct characteristics compared to the synthetic training data.

cs.CV↗

arXiv2025

HybridGS: Decoupling Transients and Statics with 2D and 3D Gaussian Splatting

Generating high-quality novel view renderings of 3D Gaussian Splatting (3DGS) in scenes featuring transient objects is challenging. We propose a novel hybrid representation, termed as HybridGS, using 2D Gaussians for transient objects per image and maintaining traditional 3D Gaussians for the whole static scenes. Note that, the 3DGS itself is better suited for modeling static scenes that assume multi-view consistency, but the transient objects appear occasionally and do not adhere to the assumption, thus we model them as planar objects from a single view, represented with 2D Gaussians. Our novel representation decomposes the scene from the perspective of fundamental viewpoint consistency, making it more reasonable. Additionally, we present a novel multi-view regulated supervision method for 3DGS that leverages information from co-visible regions, further enhancing the distinctions between the transients and statics. Then, we propose a straightforward yet effective multi-stage training strategy to ensure robust training and high-quality view synthesis across various settings. Experiments on benchmark datasets show our state-of-the-art performance of novel view synthesis in both indoor and outdoor scenes, even in the presence of distracting elements.

cs.CV↗

arXiv2025

Polynomial 2D Biharmonic Coordinates for High-order Cages

We derive closed-form expressions of biharmonic coordinates for 2D high-order cages, enabling the transformation of the input polynomial curves into polynomial curves of any order. Central to our derivation is the use of the high-order boundary element method. We demonstrate the practicality and effectiveness of our method on various 2D deformations. In practice, users can easily manipulate the Bezier control points to perform the desired intuitive deformation, as the biharmonic coordinates provide an enriched deformation space and encourage the alignment between the boundary cage and its interior geometry.

cs.GR↗

arXiv2025

Constructing Boundary-identical Microstructures via Guided Diffusion for Fast Multiscale Topology Optimization

Hierarchical structures exhibit critical features across multiple scales. However, designing multiscale structures demands significant computational resources, and ensuring connectivity between microstructures remains a key challenge. To address these issues, \textit{\textbf{large-range, boundary-identical microstructure datasets}} are successfully constructed, where the microstructures share the same boundaries and exhibit a wide range of elastic moduli. This approach enables highly efficient multiscale topology optimization. Central to our technique adopts a deep generative model, guided diffusion, to generate microstructures under the two conditions, including the specified boundary and homogenized elastic tensor. We generate the desired datasets using active learning approaches, where microstructures with diverse elastic moduli are iteratively added to the dataset, which is then retrained. %We achieve the desired datasets by active learning approaches which are alternately adding microstructures with diverse elastic modulus constructed by the deep generative model into the dataset and retraining the deep generative model. After that, sixteen boundary-identical microstructure datasets with wide ranges of elastic modulus %high property coverage are constructed. We demonstrate the effectiveness and practicability of the obtained datasets over various multiscale design examples. Specifically, in the design of a mechanical cloak, we utilize macrostructures with $30 \times 30$ elements and microstructures filled with $256 \times 256$ elements. The entire reverse design process is completed within one minute, significantly enhancing the efficiency of the multiscale topology optimization.

cs.CE↗

arXiv2024

Fiber-level Woven Fabric Capture from a Single Photo

Accurately rendering the appearance of fabrics is challenging, due to their complex 3D microstructures and specialized optical properties. If we model the geometry and optics of fabrics down to the fiber level, we can achieve unprecedented rendering realism, but this raises the difficulty of authoring or capturing the fiber-level assets. Existing approaches can obtain fiber-level geometry with special devices (e.g., CT) or complex hand-designed procedural pipelines (manually tweaking a set of parameters). In this paper, we propose a unified framework to capture fiber-level geometry and appearance of woven fabrics using a single low-cost microscope image. We first use a simple neural network to predict initial parameters of our geometric and appearance models. From this starting point, we further optimize the parameters of procedural fiber geometry and an approximated shading model via differentiable rasterization to match the microscope photo more accurately. Finally, we refine the fiber appearance parameters via differentiable path tracing, converging to accurate fiber optical parameters, which are suitable for physically-based light simulations to produce high-quality rendered results. We believe that our method is the first to utilize differentiable rendering at the microscopic level, supporting physically-based scattering from explicit fiber assemblies. Our fabric parameter estimation achieves high-quality re-rendering of measured woven fabric samples in both distant and close-up views. These results can further be used for efficient rendering or converted to downstream representations. We also propose a patch-space fiber geometry procedural generation and a two-scale path tracing framework for efficient rendering of fabric scenes.

cs.GR↗

arXiv2024

Learning Neural Volumetric Pose Features for Camera Localization

We introduce a novel neural volumetric pose feature, termed PoseMap, designed to enhance camera localization by encapsulating the information between images and the associated camera poses. Our framework leverages an Absolute Pose Regression (APR) architecture, together with an augmented NeRF module. This integration not only facilitates the generation of novel views to enrich the training dataset but also enables the learning of effective pose features. Additionally, we extend our architecture for self-supervised online alignment, allowing our method to be used and fine-tuned for unlabelled images within a unified framework. Experiments demonstrate that our method achieves 14.28% and 20.51% performance gain on average in indoor and outdoor benchmark scenes, outperforming existing APR methods with state-of-the-art accuracy.

cs.CV↗

arXiv2024

Guided Diffusion for Fast Inverse Design of Density-based Mechanical Metamaterials

Mechanical metamaterial is a synthetic material that can possess extraordinary physical characteristics, such as abnormal elasticity, stiffness, and stability, by carefully designing its internal structure. To make metamaterials contain delicate local structures with unique mechanical properties, it is a potential method to represent them through high-resolution voxels. However, it brings a substantial computational burden. To this end, this paper proposes a fast inverse design method, whose core is an advanced deep generative AI algorithm, to generate voxel-based mechanical metamaterials. Specifically, we use the self-conditioned diffusion model, capable of generating a microstructure with a resolution of $128^3$ to approach the specified homogenized tensor matrix in just 3 seconds. Accordingly, this rapid reverse design tool facilitates the exploration of extreme metamaterials, the sequence interpolation in metamaterials, and the generation of diverse microstructures for multi-scale design. This flexible and adaptive generative tool is of great value in structural engineering or other mechanical systems and can stimulate more subsequent research.

cs.CE↗

arXiv2024

FrameNeRF: A Simple and Efficient Framework for Few-shot Novel View Synthesis

We present a novel framework, called FrameNeRF, designed to apply off-the-shelf fast high-fidelity NeRF models with fast training speed and high rendering quality for few-shot novel view synthesis tasks. The training stability of fast high-fidelity models is typically constrained to dense views, making them unsuitable for few-shot novel view synthesis tasks. To address this limitation, we utilize a regularization model as a data generator to produce dense views from sparse inputs, facilitating subsequent training of fast high-fidelity models. Since these dense views are pseudo ground truth generated by the regularization model, original sparse images are then used to fine-tune the fast high-fidelity model. This process helps the model learn realistic details and correct artifacts introduced in earlier stages. By leveraging an off-the-shelf regularization model and a fast high-fidelity model, our approach achieves state-of-the-art performance across various benchmark datasets.

cs.CV↗

arXiv2023

High-Quality Real-Time Rendering Using Subpixel Sampling Reconstruction

Generating high-quality, realistic rendering images for real-time applications generally requires tracing a few samples-per-pixel (spp) and using deep learning-based approaches to denoise the resulting low-spp images. Existing denoising methods have yet to achieve real-time performance at high resolutions due to the physically-based sampling and network inference time costs. In this paper, we propose a novel Monte Carlo sampling strategy to accelerate the sampling process and a corresponding denoiser, subpixel sampling reconstruction (SSR), to obtain high-quality images. Extensive experiments demonstrate that our method significantly outperforms previous approaches in denoising quality and reduces overall time costs, enabling real-time rendering capabilities at 2K resolution.

cs.CV↗

arXiv2023

NeRF synthesis with shading guidance

The emerging Neural Radiance Field (NeRF) shows great potential in representing 3D scenes, which can render photo-realistic images from novel view with only sparse views given. However, utilizing NeRF to reconstruct real-world scenes requires images from different viewpoints, which limits its practical application. This problem can be even more pronounced for large scenes. In this paper, we introduce a new task called NeRF synthesis that utilizes the structural content of a NeRF patch exemplar to construct a new radiance field of large size. We propose a two-phase method for synthesizing new scenes that are continuous in geometry and appearance. We also propose a boundary constraint method to synthesize scenes of arbitrary size without artifacts. Specifically, we control the lighting effects of synthesized scenes using shading guidance instead of decoupling the scene. We have demonstrated that our method can generate high-quality results with consistent geometry and appearance, even for scenes with complex lighting. We can also synthesize new scenes on curved surface with arbitrary lighting effects, which enhances the practicality of our proposed NeRF synthesis approach.

cs.CV↗

arXiv2023

An Optimized, Easy-to-use, Open-source GPU Solver for Large-scale Inverse Homogenization Problems

We propose a high-performance GPU solver for inverse homogenization problems to design high-resolution 3D microstructures. Central to our solver is a favorable combination of data structures and algorithms, making full use of the parallel computation power of today's GPUs through a software-level design space exploration. This solver is demonstrated to optimize homogenized stiffness tensors, such as bulk modulus, shear modulus, and Poisson's ratio, under the constraint of bounded material volume. Practical high-resolution examples with 512^3=134.2 million finite elements run in less than 40 seconds per iteration with a peak GPU memory of 9 GB on an NVIDIA GeForce GTX 1080Ti GPU. Besides, our GPU implementation is equipped with an easy-to-use framework with less than 20 lines of code to support various objective functions defined by the homogenized stiffness tensors. Our open-source high-performance implementation is publicly accessible at https://github.com/lavenklau/homo3d.

math.OC↗

arXiv2022

Asynchronous Collaborative Autoscanning with Mode Switching for Multi-Robot Scene Reconstruction

When conducting autonomous scanning for the online reconstruction of unknown indoor environments, robots have to be competent at exploring scene structure and reconstructing objects with high quality. Our key observation is that different tasks demand specialized scanning properties of robots: rapid moving speed and far vision for global exploration and slow moving speed and narrow vision for local object reconstruction, which are referred as two different scanning modes: explorer and reconstructor, respectively. When requiring multiple robots to collaborate for efficient exploration and fine-grained reconstruction, the questions on when to generate and how to assign those tasks should be carefully answered. Therefore, we propose a novel asynchronous collaborative autoscanning method with mode switching, which generates two kinds of scanning tasks with associated scanning modes, i.e., exploration task with explorer mode and reconstruction task with reconstructor mode, and assign them to the robots to execute in an asynchronous collaborative manner to highly boost the scanning efficiency and reconstruction quality. The task assignment is optimized by solving a modified Multi-Depot Multiple Traveling Salesman Problem (MDMTSP). Moreover, to further enhance the collaboration and increase the efficiency, we propose a task-flow model that actives the task generation and assignment process immediately when any of the robots finish all its tasks with no need to wait for all other robots to complete the tasks assigned in the previous iteration. Extensive experiments have been conducted to show the importance of each key component of our method and the superiority over previous methods in scanning efficiency and reconstruction quality.

cs.RO↗

arXiv2022

HeadNeRF: A Real-time NeRF-based Parametric Head Model

In this paper, we propose HeadNeRF, a novel NeRF-based parametric head model that integrates the neural radiance field to the parametric representation of the human head. It can render high fidelity head images in real-time on modern GPUs, and supports directly controlling the generated images' rendering pose and various semantic attributes. Different from existing related parametric models, we use the neural radiance fields as a novel 3D proxy instead of the traditional 3D textured mesh, which makes that HeadNeRF is able to generate high fidelity images. However, the computationally expensive rendering process of the original NeRF hinders the construction of the parametric NeRF model. To address this issue, we adopt the strategy of integrating 2D neural rendering to the rendering process of NeRF and design novel loss terms. As a result, the rendering speed of HeadNeRF can be significantly accelerated, and the rendering time of one frame is reduced from 5s to 25ms. The well designed loss terms also improve the rendering accuracy, and the fine-level details of the human head, such as the gaps between teeth, wrinkles, and beards, can be represented and synthesized by HeadNeRF. Extensive experimental results and several applications demonstrate its effectiveness. The trained parametric model is available at https://github.com/CrisHY1995/headnerf.

cs.CV↗