arXiv Science⌕ Search

arXiv subjects

Liam P. Barry

Publications and source records attributed to Liam P. Barry.

13 recordsLinked to original sources
arXiv2023

Experimental Demonstration of Network Convergence with Coherent and AnalogRadio-over-Fibre signals For Densified 5.5G/6G Small Cell Networks

In this work we analyse and demonstrate the coexistence of digital coherent and analogue radio over fibre signals over an access-metro transmission network and field fibre. We analyse how the spectral proximity of the two signals and the non-ideal filter alignment of typical telecomms-grade ROADMs affect the signal performance. Our results show that coexistence is indeed possible, although performance deteriorates with the increase in number of ROADMs in the network topology. Thus, while todays access-metro networks will be able to support future 5.5 and 6G cell densification operating at mmWave and THz frequency, using spectral efficient analogue radio over fibre transmission, there will be trade-offs to be considered. In our experiment setup, we show that the limit for ARoF accessible performance is reached after transmission over 3 ROADMs and a total of 49 km of fibre.

cs.NI↗
arXiv2022

Dual-mode microresonators as straightforward access to octave-spanning dissipative Kerr solitons

The Kerr soliton frequency comb is a revolutionary compact ruler of coherent light that allows applications, from precision metrology to quantum information technology. The universal, reliable, and low-cost soliton microcomb source is key to these applications. In this work, we thoroughly present an innovative design strategy for realizing optical microresonators with two adjacent modes, separated by approximately 10 GHz, which stabilizes soliton formation without using additional auxiliary laser or RF components. We demonstrate the deterministic generation of the single-solitons that span 1.5-octaves, i.e., near 200 THz, via adiabatic pump wavelength tuning. The ultra-wide soliton existence ranges up to 17 GHz not only suggests the robustness of the system but will also extend the applications of soliton combs. Moreover, the proposed scheme is found to easily give rise to multi-solitons as well as the soliton crystals featuring enhanced repetition rate (2 and 3 THz) and conversion efficiency greater than 10%. We also show the effective thermal tuning of mode separation for stably accessing single-soliton. Our results are crucial for the chip-scale self-referenced frequency combs with a simplified configuration.

physics.optics↗
arXiv2019

Real-Time Machine Learning Based Fiber-Induced Nonlinearity Compensation in Energy-Efficient Coherent Optical Networks

We experimentally demonstrate the first field-programmable gate-array-based real-time fiber nonlinearity compensator (NLC) using sparse K-means++ machine learning clustering in an energy-efficient 40-Gb/s 16-quadrature amplitude modulated self-coherent optical system. Our real-time NLC shows up to 3 dB improvement in Q-factor compared to linear equalization at 50 km of transmission.

physics.app-ph↗
arXiv2019

Exceeding the Nonlinear Shannon-Limit in Coherent Optical Communications by MIMO Machine Learning

The nonlinear Shannon capacity limit has been identified as the fundamental barrier to the maximum rate of transmitted information in optical communications. In long-haul high-bandwidth optical networks, this limit is mainly attributed to deterministic Kerr-induced fiber nonlinearities and from the interaction of amplified spontaneous emission noise from cascaded optical amplifiers with fiber nonlinearity: the stochastic parametric noise amplification. Unlike earlier impractical approaches that compensate solely deterministic nonlinearities, here we demonstrate a novel electronic-based deep neural network with multiple-inputs and outputs (MIMO) that tackles the interplay of deterministic and stochastic nonlinearity manifestation in coherent optical signals. Our demonstration shows that MIMO deep learning can compensate nonlinear inter-carrier crosstalk effects even in the presence of frequency stochastic variations, which has hitherto been considered impossible. Our solution significantly outperforms conventional machine learning and gold-standard nonlinear equalizers without sacrificing computational complexity, leading to record-breaking transmission performance for up to 40 Gbit/sec high-spectral-efficient optical signals.

eess.SP↗
arXiv2019

DBSCAN for nonlinear equalization in high-capacity multi-carrier optical communications

Coherent optical multi-carrier communications have recently dominated metro-regional and long-haul optical communications. However, the major obstacle of networks involving coherent multi-carrier signals such as coherent optical orthogonal frequency-division multiplexing (CO-OFDM) is the fiber-induced nonlinearity and the parametric noise amplification from cascaded optical amplifiers which results in significant nonlinear distortion among subcarriers. Here, we present the first nonlinear equalizer in optical communications using the traditional Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm and a novel modified version of DBSCAN which combines K-means clustering on the noisy un-clustered symbols. For a 24.72 Gbit/sec differential quaternary phase-shift keying (DQPSK) CO-OFDM system, the modified DBSCAN can increase the signal quality-factor by up to 2.158 dB compared to linear equalization at 500 km of transmission. The modified DBSCAN slightly outperforms the traditional DBSCAN, fuzzy-logic C-means, hierarchical and conventional K-means clustering at high launched optical powers.

eess.SP↗
arXiv2018

Fiber-induced nonlinearity compensation in coherent optical systems by affinity propagation soft-clustering

There is a tremendous need to maximize signal capacity without sacrificing energy consumption and complexity in optical fiber communications due to the rise of network traffic demand and critical latency-aware services such as telemedicine and the Internet-of-Things. In this work, the first system-agnostic and training-data-free fiber nonlinearity compensator (NLC) using affinity propagation (AP) clustering is experimentally demonstrated. It is shown that compared to linear equalization, AP can increase the signal quality-factor up to about 5 dB in 16-quadrature-amplitude-modulated coherent optical systems by effectively tackling deterministic and stochastic nonlinearities. AP outperforms benchmark clustering algorithms and complex deterministic schemes such as K-means, fuzzy-logic, digital-back propagation and Volterra-based NLC, offering a power margin extension of up to 4 dB.

eess.SP↗
arXiv2017

Software-Defined Silicon Photonics based Metro Node for Spatial and Wavelength Superchannel Switching

Due to the growing popularity of optical superchannels and software defined networking, reconfigurable optical add-drop multiplexer (ROADM) architectures for superchannel switching have recently attracted significant attention. ROADMs based on micro electro-mechanical system (MEMS) and liquid crystal-on-silicon (LCoS) technologies are predominantly used. Motivated by requirements for low power, high-speed, small area footprint and compact switching solutions, we propose and demonstrate spatial and wavelength flexible superchannel switching using monolithically integrated silicon photonics (SiP) micro-ring resonators (MRR). We demonstrate the MRRs capabilities and potential to be used as a fundamental building block in ROADMs. Unicast and multicast switching operation of an entire superchannel is demonstrated after transmission over 50 km of standard single mode fiber. The performance of each sub-channel from the 120 Gb/s QPSK Nyquist superchannel is analyzed and degradation in error vector magnitude performance was observed for outer sub-channels due to the 3-dB bandwidth of the MRRs, which is comparable with the superchannel bandwidth. However, all sub-channels for all switching cases (unicast, multicast and bi-directional operation) exhibit performance far below the 7% FEC limit. The switching time of the SiP MRR chip is such that high capacity superchannel interconnects between users can be setup and reconfigured on the microsecond timescale.

cs.NI↗
arXiv2016

Mitigation of relative intensity noise of Quantum Dash mode-locked lasers for PAM4 based optical interconnects using encoding techniques

Quantum Dash (Q-Dash) Passively Mode-Locked Lasers (PMLLs) exhibit significant low frequency Relative Intensity Noise (RIN), due to the high Mode Partition Noise (MPN), which prevents the implementation of multilevel amplitude modulation formats such as PAM4. The authors demonstrate low frequency RIN mitigation by employing 8B/10B and Manchester encoding with PAM4 modulation format. These encoding techniques reduce the overlap between the modulation spectral content and the low-frequency RIN of the Q-Dash devices, at the expense of increased overhead. The RIN of the 33.6 GHz free spectral range Q-Dash PMLL was characterized, and the results obtained show very high levels of RIN from DC to 4 GHz, but low levels for higher frequencies. The performance improvement for 28 GBaud 8B/10B and Manchester encoded PAM4 signal has been demonstrated compared to the case when no encoding is used. Finally, the effect of RIN on the system performance was demonstrated by comparing the Bit Error Rate (BER) performance of the PAM4 signaling obtained with an External Cavity Laser (ECL) to those obtained with Q-Dash PMLL.

cs.NI↗
arXiv2015

Pump Linewidth Requirements for Processing Dispersion-Altered DQPSK Signals using FWM

We report on a potentially deleterious issue regarding the four-wave mixing based processing of dispersion-altered signals. We estimate the baudrate-dependent pump linewidth tolerances by calculating the extra optical signal to noise ratio (OSNR) penalty with respect to the propagation distance. We find that the issue is not important for 10 Gbaud differential quadrature phase shift keying (DQPSK) signals, though for 28 Gbaud (and 56 Gbaud) DQPSK signals we find that the pump linewidth requirements to implement FWM based optical signal processing needs to be in the sub-MHz range in order to avoid excessive OSNR penalties for the case of dispersion-altered signals. These results are pertinent for systems employing FWM, which could be all-optical wavelength converters for packet switching or mid-span spectral inversion techniques.

physics.optics↗
arXiv2015

Numerical investigation into the injection-locking phenomena of gain switched lasers for optical frequency comb generation

We present detailed numerical simulations of the laser dynamics that describe optical frequency comb formation by injection-locking a gain-switched laser. The typical rate equations for semiconductor lasers including stochastic carrier recombination and spontaneous emission suffice to show the injection-locking behavior of gain switched lasers, and we show how the optical frequency comb evolves starting from the free-running state, right through the final injection- locked state. Unlike the locking of continuous wave lasers, we show that the locking range for gain switched lasers is considerably greater because injection locking can be achieved by injecting at frequencies close to one of the comb lines. The quality of the comb lines are formally assessed by calculating the FM-noise spectral density and we show that under injection-locking conditions the FM-noise spectral density of the comb lines tend to that of the maser laser.

physics.optics↗
arXiv2014

Improved Reduced Models for Single-Pass and Reflective Semiconductor Optical Amplifiers

We present highly accurate and easy to implement, improved lumped semiconductor optical amplifier (SOA) models for both single-pass and reflective semiconductor optical amplifiers (RSOA). The key feature of the model is the inclusion of the internal losses and we show that a few subdivisions are required to achieve an accuracy of 0.12 dB. For the case of RSOAs, we generalize a recently published model to account for the internal losses that are vital to replicate observed RSOA behavior. The results of the improved reduced RSOA model show large overlap when compared to a full bidirectional travelling wave model over a 40 dB dynamic range of input powers and a 20 dB dynamic range of reflectivity values. The models would be useful for the rapid system simulation of signals in communication systems, i.e. passive optical networks that employ RSOAs, signal processing using SOAs and for implementing digital back propagation to undo amplifier induced signal distortions.

physics.optics↗