arXiv subjects

Liam Hallinan

Publications and source records attributed to Liam Hallinan.

5 recordsLinked to original sources

arXiv2026

Decentralised Plug-and-Play Stability Conditions for AC Grids-Part I

The rise of renewable generation in AC power systems calls for small-signal stability assessment methods that do not rely on centralised, system-wide models. In this two-part paper, we present a decentralised stability framework based on frequency-domain conditions imposed on local subsystems (many admitting equivalent graphical interpretations) which collectively imply the stability of the entire grid. The framework generalises many previously reported results, with added flexibility and plug-and-play compatibility provided by the additional degrees of freedom of the imposed conditions, the ability to mix conditions across frequency ranges, conditions on extended subsystems that couple buses to their connecting lines and loads, and a method to incorporate unstable subsystems. Detailed, heterogeneous device and line models are accommodated in the frequency domain using impedance, admittance, and power-flow models, making the framework suitable as a foundation for grid codes that enable plug-and-play functionality in inverter-dominated grids. Part I focuses on stable impedance and admittance representations and Part II extends the results to unstable subsystems, which are shown to be fundamentally present in many grid models. The results of Part I are validated on a modified 9-bus case study, demonstrating the reduced conservatism and significance of the proposed approach.

eess.SY↗

arXiv2026

Decentralised Plug-and-Play Stability Conditions for AC Grids-Part II: Unstable Subsystems

Part I of this paper presented a decentralised framework for certifying small-signal stability in AC grids using frequency-domain quadratic constraints on individual grid subsystems. Part II extends the framework to a broader class of networks that contain unstable subsystems. In particular, we show that such unstable subsystems arise in many common scenarios, even when the aggregate system is stable and well behaved. Such subsystems must be stabilised by the closed-loop network interconnection, which complicates decentralised stability analysis. A stable hybrid representation resembling the power (PQ) model at low frequencies and the impedance (IV) model at high frequencies is then defined, to which the stability framework of Part I can be applied, allowing plug-and-play compatible conditions to be formulated. Furthermore, we show that at low frequencies, the characteristic loci in the Nyquist plot of the return ratio in this hybrid representation decouple into unbounded and bounded branches along the classical $P$-$\delta$ / $Q$-$V$ separation, and give sufficient conditions on each branch for ensuring system stability. The results are validated on the Kundur two-area system, where stability is certified, with a decentralised, plug-and-play compatible grid code covering the frequency ranges in which electromagnetic interactions arise.

eess.SY↗

arXiv2026

Unstable Poles Arising in AC Power Grid Subsystem Representations

Recent small-signal stability studies of AC grids have shifted towards analysing power systems as interconnections of subsystems and leveraging their input-output properties to derive scalable stability certificates. Two subsystem representations appear frequently in the literature: the PQ model, coupling powers to phase angle and voltage magnitude, and the IV model, coupling currents to voltages. In this paper, we derive both models without simplifying the bus or line dynamics and show that a loop transformation relates the two. One of the main results in the paper is to then show analytically that each representation may exhibit unstable poles depending primarily on the operating point (IV model) or the presence of high-frequency passive dynamics (PQ model). In particular, such unstable poles in the subsystems can occur even when the aggregate interconnection is stable and well-behaved. These effects are validated numerically, including a case study using the full-order dynamics of a synchronous generator with an exciter and transformer. Our results highlight that care must be taken when choosing a subsystem representation, as neglecting high-frequency dynamics or device operating points may obscure unstable poles that must be stabilised by the network interconnection and must be accounted for in system identification.

eess.SY↗

arXiv2025

An Optimal Control Interpretation of Augmented Distributed Optimization Algorithms

Distributed optimization algorithms are used in a wide variety of problems involving complex network systems where the goal is for a set of agents in the network to solve a network-wide optimization problem via distributed update rules. In many applications, such as communication networks and power systems, transient performance of the algorithms is just as critical as convergence, as the algorithms link to physical processes which must behave well. Primal-dual algorithms have a long history in solving distributed optimization problems, with augmented Lagrangian methods leading to important classes of widely used algorithms, which have been observed in simulations to improve transient performance. Here we show that such algorithms can be seen as being the optimal solution to an appropriately formulated optimal control problem, i.e., a cost functional associated with the transient behavior of the algorithm is minimized, penalizing deviations from optimality during algorithm transients. This is shown for broad classes of algorithm dynamics, including the more involved setting where inequality constraints are present. The results presented improve our understanding of the performance of distributed optimization algorithms and can be used as a basis for improved formulations.

math.OC↗

arXiv2023

Inverse Optimal Control and Passivity-Based Design for Converter-Based Microgrids

Passivity-based approaches have been suggested as a solution to the problem of decentralised control design in many multi-agent network control problems due to the plug- and-play functionality they provide. However, it is not clear if these controllers are optimal at a network level due to their inherently local formulation, with designers often relying on heuristics to achieve desired global performance. On the other hand, solving for an optimal controller is not guaranteed to produce a passive system. In this paper, we address these dual problems by using inverse optimal control theory to formulate a set of sufficient local conditions, which when satisfied ensure that the resulting decentralised control policies are the solution to a network optimal control problem, while at the same time satisfying appropriate passivity properties. These conditions are then reformulated into a set of linear matrix inequalities (LMIs) which can be used to yield such controllers for linear systems. The proposed approach is demonstrated through a DC microgrid case study. The results substantiate the feasibility and efficacy of the presented method.

math.OC↗