arXiv subjects

Li Yang

Publications and source records attributed to Li Yang.

At least 127 records · Page 7Linked to original sources

arXiv2024

Above-room-temperature intrinsic ferromagnetism in ultrathin van der Waals crystal Fe$_{3+x}$GaTe$_2$

Two-dimensional (2D) van der Waals (vdW) magnets are crucial for ultra-compact spintronics. However, so far, no vdW crystal has exhibited tunable above-room-temperature intrinsic ferromagnetism in the 2D ultrathin regime. Here, we report the tunable above-room-temperature intrinsic ferromagnetism in ultrathin vdW crystal Fe$_{3+x}$GaTe$_2$ ($x$ = 0 and 0.3). By increasing the Fe content, the Curie temperature (TC) and room-temperature saturation magnetization of bulk Fe$_{3+x}$GaTe$_2$ crystals are enhanced from 354 to 376 K and 43.9 to 50.4 emu/g, respectively. Remarkably, the robust anomalous Hall effect in 3-nm Fe$_{3.3}$GaTe$_2$ indicate a record-high TC of 340 K and a large room-temperature perpendicular magnetic anisotropy energy of 6.6 * 10^5 J/m$^3$, superior to other ultrathin vdW ferromagnets. First-principles calculations reveal the asymmetric density of states and an additional large spin exchange interaction in ultrathin Fe$_{3+x}$GaTe$_2$ responsible for robust intrinsic ferromagnetism and higher Tc. This work opens a window for above-room-temperature ultrathin 2D magnets in vdW-integrated spintronics.

cond-mat.mtrl-sci↗

arXiv2024

On TinyML and Cybersecurity: Electric Vehicle Charging Infrastructure Use Case

As technology advances, the use of Machine Learning (ML) in cybersecurity is becoming increasingly crucial to tackle the growing complexity of cyber threats. While traditional ML models can enhance cybersecurity, their high energy and resource demands limit their applications, leading to the emergence of Tiny Machine Learning (TinyML) as a more suitable solution for resource-constrained environments. TinyML is widely applied in areas such as smart homes, healthcare, and industrial automation. TinyML focuses on optimizing ML algorithms for small, low-power devices, enabling intelligent data processing directly on edge devices. This paper provides a comprehensive review of common challenges of TinyML techniques, such as power consumption, limited memory, and computational constraints; it also explores potential solutions to these challenges, such as energy harvesting, computational optimization techniques, and transfer learning for privacy preservation. On the other hand, this paper discusses TinyML's applications in advancing cybersecurity for Electric Vehicle Charging Infrastructures (EVCIs) as a representative use case. It presents an experimental case study that enhances cybersecurity in EVCI using TinyML, evaluated against traditional ML in terms of reduced delay and memory usage, with a slight trade-off in accuracy. Additionally, the study includes a practical setup using the ESP32 microcontroller in the PlatformIO environment, which provides a hands-on assessment of TinyML's application in cybersecurity for EVCI.

cs.CR↗

arXiv2024

Quantum Truncated Differential and Boomerang Attack

Facing the worldwide steady progress in building quantum computers, it is crucial for cryptographic community to design quantum-safe cryptographic primitives. To achieve this, we need to investigate the capability of cryptographic analysis tools when used by the adversaries with quantum computers. In this article, we concentrate on truncated differential and boomerang cryptanalysis. We first present a quantum algorithm which is designed for finding truncated differentials of symmetric ciphers. We prove that, with a overwhelming probability, the truncated differentials output by our algorithm must have high differential probability for the vast majority of keys in key space. Afterwards, based on this algorithm, we design a quantum algorithm which can be used to find boomerang distinguishers. The quantum circuits of both quantum algorithms contain only polynomial quantum gates. Compared to classical tools for searching truncated differentials or boomerang distinguishers, our algorithms fully utilize the strengths of quantum computing, and can maintain the polynomial complexity while fully considering the impact of S-boxes and key scheduling.

quant-ph↗

arXiv2024

A Quantum Automatic Tool for Finding Impossible Differentials

Due to the superiority of quantum computing, traditional cryptography is facing severe threat. This makes the security evaluation of cryptographic systems in quantum attack models significant and urgent. For symmetric ciphers, the security analysis heavily relies on cyptanalytic tools. Thus exploring the use of quantum algorithms to traditional cyptanalytic tools has drawn a lot of attention. In this study, we utilize quantum algorithms to improve impossible differential attack, and design two quantum automatic tools for searching impossible differentials. The proposed quantum algorithms exploit the idea of miss-in-the-middle and the properties of truncated differentials. We rigorously prove their validity and calculate the quantum resources required to implement them. Compared to existing classical automatic cryptanalysis, the quantum tools proposed have the advantage of accurately characterizing S-boxes while only requiring polynomial complexity, and can take into consideration the impact of the key schedules in single-key model.

quant-ph↗

arXiv2024

Asymptotic properties of a multicolored random reinforced urn model with an application to multi-armed bandits

The random self-reinforcement mechanism, characterized by the principle of ``the rich get richer'', has demonstrated significant utility across various domains. One prominent model embodying this mechanism is the random reinforcement urn model. This paper investigates a multicolored, multiple-drawing variant of the random reinforced urn model. We establish the limiting behavior of the normalized urn composition and demonstrate strong convergence upon scaling the counts of each color. Additionally, we derive strong convergence estimators for the reinforcement means, i.e., for the expectations of the replacement matrix's diagonal elements, and prove their joint asymptotic normality. It is noteworthy that the estimators of the largest reinforcement mean are asymptotically independent of the estimators of the other smaller reinforcement means. Additionally, if a reinforcement mean is not the largest, the estimators of these smaller reinforcement means will also demonstrate asymptotic independence among themselves. Furthermore, we explore the parallels between the reinforced mechanisms in random reinforced urn models and multi-armed bandits, addressing hypothesis testing for expected payoffs in the latter context.

math.ST↗

arXiv2024

Custom Cloth Creation and Virtual Try-on for Everyone

This demo showcases a simple tool that utilizes AIGC technology, enabling both professional designers and regular users to easily customize clothing for their digital avatars. Customization options include changing clothing colors, textures, logos, and patterns. Compared with traditional 3D modeling processes, our approach significantly enhances efficiency and interactivity and reduces production costs.

cs.HC↗

arXiv2024

EAVE: Efficient Product Attribute Value Extraction via Lightweight Sparse-layer Interaction

Product attribute value extraction involves identifying the specific values associated with various attributes from a product profile. While existing methods often prioritize the development of effective models to improve extraction performance, there has been limited emphasis on extraction efficiency. However, in real-world scenarios, products are typically associated with multiple attributes, necessitating multiple extractions to obtain all corresponding values. In this work, we propose an Efficient product Attribute Value Extraction (EAVE) approach via lightweight sparse-layer interaction. Specifically, we employ a heavy encoder to separately encode the product context and attribute. The resulting non-interacting heavy representations of the context can be cached and reused for all attributes. Additionally, we introduce a light encoder to jointly encode the context and the attribute, facilitating lightweight interactions between them. To enrich the interaction within the lightweight encoder, we design a sparse-layer interaction module to fuse the non-interacting heavy representation into the lightweight encoder. Comprehensive evaluation on two benchmarks demonstrate that our method achieves significant efficiency gains with neutral or marginal loss in performance when the context is long and number of attributes is large. Our code is available \href{https://anonymous.4open.science/r/EAVE-EA18}{here}.

cs.CL↗

arXiv2024

LP-3DGS: Learning to Prune 3D Gaussian Splatting

Recently, 3D Gaussian Splatting (3DGS) has become one of the mainstream methodologies for novel view synthesis (NVS) due to its high quality and fast rendering speed. However, as a point-based scene representation, 3DGS potentially generates a large number of Gaussians to fit the scene, leading to high memory usage. Improvements that have been proposed require either an empirical and preset pruning ratio or importance score threshold to prune the point cloud. Such hyperparamter requires multiple rounds of training to optimize and achieve the maximum pruning ratio, while maintaining the rendering quality for each scene. In this work, we propose learning-to-prune 3DGS (LP-3DGS), where a trainable binary mask is applied to the importance score that can find optimal pruning ratio automatically. Instead of using the traditional straight-through estimator (STE) method to approximate the binary mask gradient, we redesign the masking function to leverage the Gumbel-Sigmoid method, making it differentiable and compatible with the existing training process of 3DGS. Extensive experiments have shown that LP-3DGS consistently produces a good balance that is both efficient and high quality.

cs.CV↗

arXiv2024

The Algorithm for Solving Quantum Linear Systems of Equations With Coherent Superposition and Its Extended Applications

Many quantum algorithms for attacking symmetric cryptography involve the rank problem of quantum linear equations. In this paper, we first propose two quantum algorithms for solving quantum linear systems of equations with coherent superposition and construct their specific quantum circuits. Unlike previous related works, our quantum algorithms are universal. Specifically, the two quantum algorithms can both compute the rank and general solution by one measurement. The difference between them is whether the data register containing the quantum coefficient matrix can be disentangled with other registers and keep the data qubits unchanged. On this basis, we apply the two quantum algorithms as a subroutine to parallel Simon's algorithm (with multiple periods), Grover Meets Simon algorithm, and Alg-PolyQ2 algorithm, respectively. Afterwards, we construct a quantum classifier within Grover Meets Simon algorithm and the test oracle within Alg-PolyQ2 algorithm in detail, including their respective quantum circuits. To our knowledge, no such specific analysis has been done before. We rigorously analyze the success probability of those algorithms to ensure that the success probability based on the proposed quantum algorithms will not be lower than that of those original algorithms. Finally, we discuss the lower bound of the number of CNOT gates for solving quantum linear systems of equations with coherent superposition, and our quantum algorithms reach the optimum in terms of minimizing the number of CNOT gates. Furthermore, our analysis indicates that the proposed algorithms are mainly suitable for conducting attacks against lightweight symmetric ciphers, within the effective working time of an ion trap quantum computer.

quant-ph↗

arXiv2024

A Survey of Route Recommendations: Methods, Applications, and Opportunities

Nowadays, with advanced information technologies deployed citywide, large data volumes and powerful computational resources are intelligentizing modern city development. As an important part of intelligent transportation, route recommendation and its applications are widely used, directly influencing citizens` travel habits. Developing smart and efficient travel routes based on big data (possibly multi-modal) has become a central challenge in route recommendation research. Our survey offers a comprehensive review of route recommendation work based on urban computing. It is organized by the following three parts: 1) Methodology-wise. We categorize a large volume of traditional machine learning and modern deep learning methods. Also, we discuss their historical relations and reveal the edge-cutting progress. 2) Application\-wise. We present numerous novel applications related to route commendation within urban computing scenarios. 3) We discuss current problems and challenges and envision several promising research directions. We believe that this survey can help relevant researchers quickly familiarize themselves with the current state of route recommendation research and then direct them to future research trends.

cs.AI↗

arXiv2024

Continual Learning for Smart City: A Survey

With the digitization of modern cities, large data volumes and powerful computational resources facilitate the rapid update of intelligent models deployed in smart cities. Continual learning (CL) is a novel machine learning paradigm that constantly updates models to adapt to changing environments, where the learning tasks, data, and distributions can vary over time. Our survey provides a comprehensive review of continual learning methods that are widely used in smart city development. The content consists of three parts: 1) Methodology-wise. We categorize a large number of basic CL methods and advanced CL frameworks in combination with other learning paradigms including graph learning, spatial-temporal learning, multi-modal learning, and federated learning. 2) Application-wise. We present numerous CL applications covering transportation, environment, public health, safety, networks, and associated datasets related to urban computing. 3) Challenges. We discuss current problems and challenges and envision several promising research directions. We believe this survey can help relevant researchers quickly familiarize themselves with the current state of continual learning research used in smart city development and direct them to future research trends.

cs.LG↗

arXiv2024

Tailoring Physical Properties of Crystals through Synthetic Temperature Control: A Case Study for new Polymorphic NbFeTe2 phases

Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe2 material. Two different types of polymorphic NbFeTe2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70K, consistent with the electrical transport and magnetic susceptibility studies. Our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials.

cond-mat.str-el↗

arXiv2024

Theoretical investigation of the vertical dielectric screening dependence on defects for few-layered van der Waals materials

First-principle calculations were employed to analyze the effects induced by vacancies of molybdenum (Mo) and sulfur (S) on the dielectric properties of few-layered MoS2. We explored the combined effects of vacancies and dipole interactions on the dielectric properties of few-layered MoS2. In the presence of dielectric screening, we investigated uniformly distributed Mo and S vacancies, and then considered the case of concentrated vacancies. Our results show that the dielectric screening remarkably depends on the distribution of vacancies owing to the polarization induced by the vacancies and on the interlayer distances. This conclusion was validated for a wide range of wide-gap semiconductors with different positions and distributions of vacancies, providing an effective and reliable method for calculating and predicting electrostatic screening of dimensionally reduced materials. We further provided a method for engineering the dielectric constant by changing the interlayer distance, tuning the number of vacancies and the distribution of vacancies in few-layered van der Waals materials for their application in nanodevices and supercapacitors.

cond-mat.mtrl-sci↗

arXiv2024

Mind the map! Accounting for existing map information when estimating online HDMaps from sensor

While HDMaps are a crucial component of autonomous driving, they are expensive to acquire and maintain. Estimating these maps from sensors therefore promises to significantly lighten costs. These estimations however overlook existing HDMaps, with current methods at most geolocalizing low quality maps or considering a general database of known maps. In this paper, we propose to account for existing maps of the precise situation studied when estimating HDMaps. We identify 3 reasonable types of useful existing maps (minimalist, noisy, and outdated). We also introduce MapEX, a novel online HDMap estimation framework that accounts for existing maps. MapEX achieves this by encoding map elements into query tokens and by refining the matching algorithm used to train classic query based map estimation models. We demonstrate that MapEX brings significant improvements on the nuScenes dataset. For instance, MapEX - given noisy maps - improves by 38% over the MapTRv2 detector it is based on and by 8% over the current SOTA.

cs.LG↗

arXiv2024

Analysis of Maximum Threshold and Quantum Security for Fault-Tolerant Encoding and Decoding Scheme Base on Steane Code

Steane code is one of the most widely studied quantum error-correction codes, which is a natural choice for fault-tolerant quantum computation (FTQC). However, the original Steane code is not fault-tolerant because the CNOT gates in an encoded block may cause error propagation. In this paper, we first propose a fault-tolerant encoding and decoding scheme, which analyzes all possible errors caused by each quantum gate in an error-correction period. In this scheme, we combine the results of measuring redundant qubits with those of syndrome measurements to identify specific errors for different types of errors. But due to the error propagation, there may be cases where different errors produce the same measurement results. Therefore, we introduce the "flag qubits" scheme (providing its usage conditions) to reduce error interference as much as possible, and we consider the errors caused by the introduced quantum gates, realizing the truly fault-tolerant Steane code. Afterwards, we provide the fault-tolerant scheme of the universal quantum gate set, including fault-tolerant preparation and verification of ancillary states. This is the first time that fault tolerance has been considered for every process of FTQC. Finally, We propose an algorithm for a more accurate estimation of thresholds and optimal error-correction period selection. Our simulation results based on this entire scheme demonstrate the effectiveness of this algorithm, satisfying the threshold theorem and the currently widely recognized threshold. We analyze the relationship among the maximum threshold, concatenated levels, and quantum logical depth, showing that quantum operations play a crucial role in increasing the threshold. Furthermore, we analyze the computational theoretical limits of quantum computers from the perspectives of attack and active defense based on our FTQC scheme, thereby assessing the security of a system.

quant-ph↗

arXiv2024

CDSE-UNet: Enhancing COVID-19 CT Image Segmentation with Canny Edge Detection and Dual-Path SENet Feature Fusion

Accurate segmentation of COVID-19 CT images is crucial for reducing the severity and mortality rates associated with COVID-19 infections. In response to blurred boundaries and high variability characteristic of lesion areas in COVID-19 CT images, we introduce CDSE-UNet: a novel UNet-based segmentation model that integrates Canny operator edge detection and a dual-path SENet feature fusion mechanism. This model enhances the standard UNet architecture by employing the Canny operator for edge detection in sample images, paralleling this with a similar network structure for semantic feature extraction. A key innovation is the Double SENet Feature Fusion Block, applied across corresponding network layers to effectively combine features from both image paths. Moreover, we have developed a Multiscale Convolution approach, replacing the standard Convolution in UNet, to adapt to the varied lesion sizes and shapes. This addition not only aids in accurately classifying lesion edge pixels but also significantly improves channel differentiation and expands the capacity of the model. Our evaluations on public datasets demonstrate CDSE-UNet's superior performance over other leading models, particularly in segmenting large and small lesion areas, accurately delineating lesion edges, and effectively suppressing noise

eess.IV↗

arXiv2024

Tunable high-temperature tunneling magnetoresistance in all-van der Waals antiferromagnet/semiconductor/ferromagnet junctions

Magnetic tunnel junctions (MTJs) have been widely applied in spintronic devices for efficient spin detection through the imbalance of spin polarization at the Fermi level. The van der Waals (vdW) nature of two-dimensional (2D) magnets with atomic-scale flat surfaces and negligible surface roughness greatly facilitates the development of MTJs, yet is only restricted to ferromagnets. Here, we report A-type antiferromagnetism in 2D vdW single-crystal (Fe0.8Co0.2)3GaTe2 with TN~203 K in bulk and ~185 K in 9-nm nanosheets. The metallic nature and out-of-plane magnetic anisotropy make it a suitable candidate for MTJ electrodes. By constructing heterostructures based on (Fe0.8Co0.2)3GaTe2/WSe2/Fe3GaTe2, we obtain a large tunneling magnetoresistance (TMR) ratio of 180% at low temperature and the TMR retains at near-room temperature 280 K. Moreover, the TMR is tunable by the electric field down to 1 mV, implying the potential in energy-efficient spintronic devices. Our work provides new opportunities for 2D antiferromagnetic spintronics and quantum devices.

cond-mat.mtrl-sci↗

arXiv2024

Point Cloud in the Air

Acquisition and processing of point clouds (PCs) is a crucial enabler for many emerging applications reliant on 3D spatial data, such as robot navigation, autonomous vehicles, and augmented reality. In most scenarios, PCs acquired by remote sensors must be transmitted to an edge server for fusion, segmentation, or inference. Wireless transmission of PCs not only puts on increased burden on the already congested wireless spectrum, but also confronts a unique set of challenges arising from the irregular and unstructured nature of PCs. In this paper, we meticulously delineate these challenges and offer a comprehensive examination of existing solutions while candidly acknowledging their inherent limitations. In response to these intricacies, we proffer four pragmatic solution frameworks, spanning advanced techniques, hybrid schemes, and distributed data aggregation approaches. In doing so, our goal is to chart a path toward efficient, reliable, and low-latency wireless PC transmission.

cs.IT↗