arXiv subjects

Lee Bernstein

Publications and source records attributed to Lee Bernstein.

7 recordsLinked to original sources

arXiv2026

Fast-reactor neutron sources in evaluated nuclear data library validation

Two different neutron sources, based on $^{235}$U-fission neutrons with different average energies, provide integral benchmark data for validation of $\gamma$-ray production data in the evaluated nuclear data libraries corresponding to fast-neutron-induced inelastic-neutron scattering reactions. Firstly, we consider the IRT-M Research Reactor, formerly located at the Nuclear Research Institute just outside of Baghdad, Iraq, to demonstrate the validation methodology using the associated $\gamma$-ray data in the Evaluated Nuclear Data File, version VIII.0 (ENDF/B-VIII.0), for several $\gamma$-ray transitions over a wide range of nuclides including $^{28}$Si, $^{32}$S, $^{56}$Fe, and $^{186}$W. Using the characterized neutron flux of the Baghdad IRT-M Reactor, we find flux-weighted cross-sections deduced using the ENDF/B-VIII.0 $\gamma$-ray data to be in good agreement with the integral measurements performed at the Baghdad Research Reactor in addition to the corresponding results of different reaction-model calculations, {\tt CoH$_{3}$} and {\tt EMPIRE}. Given the excitation thresholds for the $\gamma$-ray transitions involved in this investigation, these observations lend further support to the characterization of the IRT-M flux in the fast-neutron energy region $0.862 \leq E_{n} \leq 5.0$ MeV. The additional detail devoted to the IRT-M source reflects the broader scope of the validation work carried out at that facility. A second neutron source considered for this validation work is the Forschungsreaktor M{\"u}nich (FRM-II), Garching, Germany. Again, the flux-weighted $\gamma$-ray data from ENDF/B-VIII.0 for $^{56}$Fe compare well to the integral FRM-II measurement and reaction-model calculations.

nucl-th↗

arXiv2026

Nuclear Data Needs for Microcalorimetry and Non-destructive Assay

Cryogenic microcalorimeters are state-of-the-art radiation detectors using superconducting and quantum technologies. They can resolve complex X-ray and low-energy {\gamma}-ray spectra with ultra-high energy resolution of an order of 10 eV at 100 keV, enabling high-precision non-destructive assay (NDA) analysis of nuclear materials containing uranium, plutonium and other actinides. With significant technical advancements in microcalorimetry technology, microcalorimeters are now deployable to end-users such as the International Atomic Energy Agency (IAEA) for improved NDA. However, the accuracy of microcalorimetry analysis can be limited by nuclear data. There are several cases that the current nuclear data obtained by conventional radiation detector technologies is not sufficient to support microcalorimetry analysis. To address the growing need for improved nuclear data in microcalorimetry, the U.S. Department of Energy Office of International Nuclear Safeguards hosted a workshop on Microcalorimetry and Nuclear Data (MiND) in June 2023. Microcalorimetry experts and users, and nuclear structure evaluators and managers, and program sponsors attended the workshop with the main objective of identifying a roadmap for priority nuclear data, stakeholders, partnerships, and opportunities. This paper summarizes the outcome of the MiND workshop, including the priority list of nuclear data for microcalorimetry and a multi-laboratory measurement campaign to improve such nuclear data.

physics.ins-det↗

arXiv2025

Burnup Measurement using Bent Crystal Diffraction Spectrometers for Pebble Bed Reactors

Burnup measurement is essential for monitoring and controlling pebble bed reactors (PBRs), where fuel pebbles circulate rapidly through the core. However, conventional gamma spectroscopy using high purity germanium (HPGe) detectors is difficult due to high activity levels in discharge pebbles, leading to excessive dead time and Compton scattering. This study explores the use of bent crystal diffraction (BCD) spectrometers to filter the emitted gamma spectrum and isolate key peaks for improved measurement accuracy and speed. Pebble wise depletion calculations were performed and the resulting spectra were analyzed using ray tracing (SHADOW3) and gamma response modeling (GADRAS). Key isotopes, $^{137m}$Ba/$^{137}$Cs, $^{239}$Pu, $^{144}$Ce, $^{148m}$Pm, and $^{140}$La, were found to strongly correlate with burnup, residence time, core passes, plutonium production, and fluence. Machine learning regression models applied to simulated spectra achieved a coefficient of determination ($R^2$) as high as 0.995 for burnup prediction. Among various BCD configurations, mosaic silicon crystals in the (440) orientation combined with an HPGe detector provided optimal performance for $^{137m}$Ba, while (220) and (440) configurations paired with scintillators were effective for the remaining isotopes.

physics.ins-det↗

arXiv2019

Parameter Optimization and Uncertainty Analysis of FREYA for Spontaneous Fission

Background: The complete event fission simulation code FREYA is used to study correlations in fission. To make the best possible simulations, FREYA one must find the optimized values of the five physics-based parameters which characterize the events produced by FREYA. So far this has been done only empirically or by brute force computational techniques. Purpose: We seek to develop a method of parameter optimization for FREYA that would include uncertainty quantification and an analysis of the correlations between the parameters. Methods: We focus on spontaneous fission as a simpler test case of the method. We first check the results of previous optimizations for $^{252}$Cf(sf) and then go on to develop a simulated annealing approach to optimize the parameters. Although $^{252}$Cf(sf) has the most measured observables, we are able to apply the technique to all spontaneously fissioning isotopes in the current version of FREYA. Results: We find optimal values of the five FREYA parameters, with uncertainties, for all isotopes studied. Our results are compared with available data. The parameter values are physically reasonable and in accord with intuition, even in cases where the data for optimization are sparse to non-existent. Conclusions: The simulated annealing method provides a way to determine the best parameters for the phenomenologically-successful fission model FREYA. We have developed an algorithm that can be updated to include additional isotopes or more data sets for the current isotopes as they become available.

nucl-th↗

arXiv2017

Measurement of the $^{64}$Zn,$^{47}$Ti(n,p) Cross Sections using a DD Neutron Generator for Medical Isotope Studies

Cross sections for the $^{47}$Ti(n,p)$^{47}$Sc and $^{64}$Zn(n,p)$^{64}$Cu reactions have been measured for quasi-monoenergetic DD neutrons produced by the UC Berkeley High Flux Neutron Generator (HFNG). The HFNG is a compact neutron generator designed as a "flux-trap" that maximizes the probability that a neutron will interact with a sample loaded into a specific, central location. The study was motivated by interest in the production of $^{47}$Sc and $^{64}$Cu as emerging medical isotopes. The cross sections were measured in ratio to the $^{113}$In(n,n')$^{113m}$In and $^{115}$In(n,n')$^{115m}$In inelastic scattering reactions on co-irradiated indium samples. Post-irradiation counting using an HPGe and LEPS detectors allowed for cross section determination to within 5% uncertainty. The $^{64}$Zn(n,p)$^{64}$Cu cross section for 2.76$^{+0.01}_{-0.02}$ MeV neutrons is reported as 49.3 $\pm$ 2.6 mb (relative to $^{113}$In) or 46.4 $\pm$ 1.7 mb (relative to $^{115}$In), and the $^{47}$Ti(n,p)$^{47}$Sc cross section is reported as 26.26 $\pm$ 0.82 mb. The measured cross sections are found to be in good agreement with existing measured values but with lower uncertainty (< 5%), and also in agreement with theoretical values. This work highlights the utility of compact, flux-trap DD-based neutron sources for nuclear data measurements and potentially the production of radionuclides for medical applications.

nucl-ex↗

arXiv2017

Beam-induced Back-streaming Electron Suppression Analysis for Accelerator Type Neutron Generators

A facility based on a next-generation, high-flux D-D neutron generator has been commissioned and it is now operational at the University of California, Berkeley. The current generator design produces near monoenergetic 2.45 MeV neutrons at outputs of 10^8 n/s. Calculations provided show that future conditioning at higher currents and voltages will allow for a production rate over 10^10 n/s. A significant problem encountered was beam-induced electron backstreaming, that needed to be resolved to achieve meaningful beam currents. Two methods of suppressing secondary electrons resulting from the deuterium beam striking the target were tested: the application of static electric and magnetic fields. Computational simulations of both techniques were done using a finite element analysis in COMSOL Multiphysics. Experimental tests verified these simulation results. The most reliable suppression was achieved via the implementation of an electrostatic shroud with a voltage offset of -800 V relative to the target.

physics.acc-ph↗

arXiv2015

Nuclear Data Needs and Capabilities for Applications

The Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA) was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goals of NDNCA were compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for required measurements. This document represents the results of the workshop and a compilation of other recent documents assessing nuclear data needs for the above-mentioned applications.

nucl-ex↗