arXiv subjects

Le Zhang

Publications and source records attributed to Le Zhang.

At least 199 records · Page 11Linked to original sources

arXiv2023

Efficient Multitask Learning on Resource-Constrained Systems

We present Antler, which exploits the affinity between all pairs of tasks in a multitask inference system to construct a compact graph representation of the task set and finds an optimal order of execution of the tasks such that the end-to-end time and energy cost of inference is reduced while the accuracy remains similar to the state-of-the-art. The design of Antler is based on two observations: first, tasks running on the same platform shows affinity, which is leveraged to find a compact graph representation of the tasks that helps avoid unnecessary computations of overlapping subtasks in the task set; and second, tasks that run on the same system may have dependencies, which is leveraged to find an optimal ordering of the tasks that helps avoid unnecessary computations of the dependent tasks or the remaining portion of a task. We implement two systems: a 16-bit TI MSP430FR5994-based custom-designed ultra-low-power system, and a 32-bit ARM Cortex M4/M7-based off-the-shelf STM32H747 board. We conduct both dataset-driven experiments as well as real-world deployments with these systems. We observe that Antler's execution time and energy consumption are the lowest compared to all baseline systems and by leveraging the similarity of tasks and by reusing the intermediate results from previous task, Antler reduces the inference time by 2.3X -- 4.6X and saves 56\% -- 78\% energy, when compared to the state-of-the-art.

cs.DC↗

arXiv2023

Using angular two-point correlations to self-calibrate the photometric redshift distributions of DECaLS DR9

Calibrating the redshift distributions of photometric galaxy samples is essential in weak lensing studies. The self-calibration method combines angular auto- and cross-correlations between galaxies in multiple photometric redshift (photo-$z$) bins to reconstruct the scattering rates matrix between redshift bins. In this paper, we test a recently proposed self-calibration algorithm using the DECaLS Data Release 9 and investigate to what extent the scattering rates are determined. We first mitigate the spurious angular correlations due to imaging systematics by a machine learning based method. We then improve the algorithm for $χ^2$ minimization and error estimation. Finally, we solve for the scattering matrices, carry out a series of consistency tests and find reasonable agreements: (1) finer photo-$z$ bins return a high-resolution scattering matrix, and it is broadly consistent with the low-resolution matrix from wider bins; (2) the scattering matrix from the Northern Galactic Cap is almost identical to that from Southern Galactic Cap; (3) the scattering matrices are in reasonable agreement with those constructed from the power spectrum and the weighted spectroscopic subsample. We also evaluate the impact of cosmic magnification. Although it changes little the diagonal elements of the scattering matrix, it affects the off-diagonals significantly. The scattering matrix also shows some dependence on scale cut of input correlations, which may be related to a known numerical degeneracy between certain scattering pairs. This work demonstrates the feasibility of the self-calibration method in real data and provides a practical alternative to calibrate the redshift distributions of photometric samples.

astro-ph.CO↗

arXiv2022

FedTADBench: Federated Time-Series Anomaly Detection Benchmark

Time series anomaly detection strives to uncover potential abnormal behaviors and patterns from temporal data, and has fundamental significance in diverse application scenarios. Constructing an effective detection model usually requires adequate training data stored in a centralized manner, however, this requirement sometimes could not be satisfied in realistic scenarios. As a prevailing approach to address the above problem, federated learning has demonstrated its power to cooperate with the distributed data available while protecting the privacy of data providers. However, it is still unclear that how existing time series anomaly detection algorithms perform with decentralized data storage and privacy protection through federated learning. To study this, we conduct a federated time series anomaly detection benchmark, named FedTADBench, which involves five representative time series anomaly detection algorithms and four popular federated learning methods. We would like to answer the following questions: (1)How is the performance of time series anomaly detection algorithms when meeting federated learning? (2) Which federated learning method is the most appropriate one for time series anomaly detection? (3) How do federated time series anomaly detection approaches perform on different partitions of data in clients? Numbers of results as well as corresponding analysis are provided from extensive experiments with various settings. The source code of our benchmark is publicly available at https://github.com/fanxingliu2020/FedTADBench.

cs.LG↗

arXiv2022

Deep Negative Correlation Classification

Ensemble learning serves as a straightforward way to improve the performance of almost any machine learning algorithm. Existing deep ensemble methods usually naively train many different models and then aggregate their predictions. This is not optimal in our view from two aspects: i) Naively training multiple models adds much more computational burden, especially in the deep learning era; ii) Purely optimizing each base model without considering their interactions limits the diversity of ensemble and performance gains. We tackle these issues by proposing deep negative correlation classification (DNCC), in which the accuracy and diversity trade-off is systematically controlled by decomposing the loss function seamlessly into individual accuracy and the correlation between individual models and the ensemble. DNCC yields a deep classification ensemble where the individual estimator is both accurate and negatively correlated. Thanks to the optimized diversities, DNCC works well even when utilizing a shared network backbone, which significantly improves its efficiency when compared with most existing ensemble systems. Extensive experiments on multiple benchmark datasets and network structures demonstrate the superiority of the proposed method.

cs.CV↗

arXiv2022

Learning to Iteratively Solve Routing Problems with Dual-Aspect Collaborative Transformer

Recently, Transformer has become a prevailing deep architecture for solving vehicle routing problems (VRPs). However, it is less effective in learning improvement models for VRP because its positional encoding (PE) method is not suitable in representing VRP solutions. This paper presents a novel Dual-Aspect Collaborative Transformer (DACT) to learn embeddings for the node and positional features separately, instead of fusing them together as done in existing ones, so as to avoid potential noises and incompatible correlations. Moreover, the positional features are embedded through a novel cyclic positional encoding (CPE) method to allow Transformer to effectively capture the circularity and symmetry of VRP solutions (i.e., cyclic sequences). We train DACT using Proximal Policy Optimization and design a curriculum learning strategy for better sample efficiency. We apply DACT to solve the traveling salesman problem (TSP) and capacitated vehicle routing problem (CVRP). Results show that our DACT outperforms existing Transformer based improvement models, and exhibits much better generalization performance across different problem sizes on synthetic and benchmark instances, respectively.

cs.LG↗

arXiv2022

Removal of point source leakage from time-order data filtering

Time-ordered data (TOD) from ground-based CMB experiments are generally filtered before map-making to remove or reduce the contamination from the ground and the atmospheric emissions. However, when the observation region contains strong point sources, the filtering process will result in considerable leakage around the point sources in a measured CMB map, and leave spurious polarization signals. Therefore, such signals need to be assessed and removed before CMB science exploitation. In this work, we present a new method that we call "template fitting" and can effectively remove these leakage signals in pixel domain, not only satisfying the requirement for measuring primordial gravitational waves from CMB-$B$ modes, but also avoiding time-consuming operations on TOD.

astro-ph.CO↗

arXiv2022

Effects of Active Galactic Nucleus Feedback on Cold Gas Depletion and Quenching of Central Galaxies

We investigate the influence of active galactic nucleus (AGN) feedback on the galaxy cold gas content and its connection to galaxy quenching in three hydrodynamical simulations of Illustris, IllustrisTNG and SIMBA. By comparing to the observed atomic and molecular neutral hydrogen measurements for central galaxies, we find that Illustris over-predicts the cold gas masses in star-forming galaxies and significantly under-predicts them for quenched galaxies. IllustrisTNG performs better in this comparison than Illustris, but quenched galaxies retain too much cold gas compared with observations. SIMBA shows good agreement with observations, by depleting the global cold gas reservoir for quenched galaxies. We find that the discrepancies in IllustrisTNG are caused by its weak kinetic AGN feedback that only redistributes the cold gas from the inner disks to the outer regions and reduces the inner cold gas densities. It agrees with observations much better when only the cold gas within the stellar disk is considered to infer the star formation rates. From dependences of cold gas reservoir on the black hole mass and Eddington ratio, we find that the cumulative energy release during the black hole growth is the dominant reason for the cold gas depletion and thus the galaxy quenching. We further measure the central stellar surface density within 1 kpc ($Σ_1$) for the high-resolution run of IllustrisTNG and find a tight correlation between $Σ_1$ and black hole mass. It suggests that the observed decreasing trend of cold gas mass with $Σ_1$ is also a reflection of the black hole growth.

astro-ph.GA↗

arXiv2022

Performance forecasts for the primordial gravitational wave detection pipelines for AliCPT-1

AliCPT is the first Chinese cosmic microwave background (CMB) experiment which will make the most precise measurements of the CMB polarization in the northern hemisphere. The key science goal for AliCPT is the detection of primordial gravitational waves (PGWs). It is well known that an epoch of cosmic inflation, in the very early universe, can produce PGWs, which leave an imprint on the CMB in form of odd parity $B$-mode polarization. In this work, we study the performance of the component separation and parameter estimation pipelines in context of constraining the value of the tensor-to-scalar ratio. Based on the simulated data for one observation season, we compare five different pipelines with different working principles. Three pipelines perform component separation at map or spectra level before estimating $r$ from the cleaned spectra, while the other two pipelines performs a global fit for both foreground parameters and $r$. We also test different methods to account for the effects of time stream filtering systematics. This work shows that our pipelines provide consistent and robust constraints on the tensor-to-scalar ratio and a consistent sensitivity $σ(r) \sim 0.02$. This showcases the potential of precise $B$-mode polarization measurement with AliCPT-1. AliCPT will provide a powerful opportunity to detect PGWs, which is complementary with various ground-based CMB experiments in the southern hemisphere.

astro-ph.CO↗

arXiv2022

Self-calibration of photometric redshift scatter from DECaLS DR8 power spectrum and validation with simulated catalogues

The uncertainty in the photometric redshift estimation is one of the major systematics in weak lensing cosmology. The self-calibration method is able to reduce this systematics without assuming strong priors. We improve the recently proposed self-calibration algorithm to enhance the stability and robustness with the noisy measurement. The improved algorithm is tested on the power spectra measured from the simulated catalogues constructed according to DECaLS DR8 photometric catalogue. For the fiducial analysis with 5 equal-width redshift bins over $0<z<1$ and 6 bands over scales $100 \leq \ell<1000$, we find that the improved algorithm successfully reconstructs the scatter rates and the auto power spectrum in true redshift bins at the level of $\sim0.015$ and $\sim4.4$ per cent, respectively. The bias of the mean redshift is reduced by more than 50 per cent compared to the photo-$z$ without self-calibration, especially for the cases with catastrophic photo-$z$ errors. The reconstructed results of DECaLS DR8 galaxy sample are in line with the expectations from the simulation validation. The self-calibration code is publicly available at https://github.com/PengHui-hub/FP-NMF.

astro-ph.CO↗

arXiv2022

Ret3D: Rethinking Object Relations for Efficient 3D Object Detection in Driving Scenes

Current efficient LiDAR-based detection frameworks are lacking in exploiting object relations, which naturally present in both spatial and temporal manners. To this end, we introduce a simple, efficient, and effective two-stage detector, termed as Ret3D. At the core of Ret3D is the utilization of novel intra-frame and inter-frame relation modules to capture the spatial and temporal relations accordingly. More Specifically, intra-frame relation module (IntraRM) encapsulates the intra-frame objects into a sparse graph and thus allows us to refine the object features through efficient message passing. On the other hand, inter-frame relation module (InterRM) densely connects each object in its corresponding tracked sequences dynamically, and leverages such temporal information to further enhance its representations efficiently through a lightweight transformer network. We instantiate our novel designs of IntraRM and InterRM with general center-based or anchor-based detectors and evaluate them on Waymo Open Dataset (WOD). With negligible extra overhead, Ret3D achieves the state-of-the-art performance, being 5.5% and 3.2% higher than the recent competitor in terms of the LEVEL 1 and LEVEL 2 mAPH metrics on vehicle detection, respectively.

cs.CV↗

arXiv2022

Aesthetic Visual Question Answering of Photographs

Aesthetic assessment of images can be categorized into two main forms: numerical assessment and language assessment. Aesthetics caption of photographs is the only task of aesthetic language assessment that has been addressed. In this paper, we propose a new task of aesthetic language assessment: aesthetic visual question and answering (AVQA) of images. If we give a question of images aesthetics, model can predict the answer. We use images from \textit{www.flickr.com}. The objective QA pairs are generated by the proposed aesthetic attributes analysis algorithms. Moreover, we introduce subjective QA pairs that are converted from aesthetic numerical labels and sentiment analysis from large-scale pre-train models. We build the first aesthetic visual question answering dataset, AesVQA, that contains 72,168 high-quality images and 324,756 pairs of aesthetic questions. Two methods for adjusting the data distribution have been proposed and proved to improve the accuracy of existing models. This is the first work that both addresses the task of aesthetic VQA and introduces subjectiveness into VQA tasks. The experimental results reveal that our methods outperform other VQA models on this new task.

cs.CV↗

arXiv2022

Attribute Controllable Beautiful Caucasian Face Generation by Aesthetics Driven Reinforcement Learning

In recent years, image generation has made great strides in improving the quality of images, producing high-fidelity ones. Also, quite recently, there are architecture designs, which enable GAN to unsupervisedly learn the semantic attributes represented in different layers. However, there is still a lack of research on generating face images more consistent with human aesthetics. Based on EigenGAN [He et al., ICCV 2021], we build the techniques of reinforcement learning into the generator of EigenGAN. The agent tries to figure out how to alter the semantic attributes of the generated human faces towards more preferable ones. To accomplish this, we trained an aesthetics scoring model that can conduct facial beauty prediction. We also can utilize this scoring model to analyze the correlation between face attributes and aesthetics scores. Empirically, using off-the-shelf techniques from reinforcement learning would not work well. So instead, we present a new variant incorporating the ingredients emerging in the reinforcement learning communities in recent years. Compared to the original generated images, the adjusted ones show clear distinctions concerning various attributes. Experimental results using the MindSpore, show the effectiveness of the proposed method. Altered facial images are commonly more attractive, with significantly improved aesthetic levels.

cs.CV↗

arXiv2022

Mining Relations among Cross-Frame Affinities for Video Semantic Segmentation

The essence of video semantic segmentation (VSS) is how to leverage temporal information for prediction. Previous efforts are mainly devoted to developing new techniques to calculate the cross-frame affinities such as optical flow and attention. Instead, this paper contributes from a different angle by mining relations among cross-frame affinities, upon which better temporal information aggregation could be achieved. We explore relations among affinities in two aspects: single-scale intrinsic correlations and multi-scale relations. Inspired by traditional feature processing, we propose Single-scale Affinity Refinement (SAR) and Multi-scale Affinity Aggregation (MAA). To make it feasible to execute MAA, we propose a Selective Token Masking (STM) strategy to select a subset of consistent reference tokens for different scales when calculating affinities, which also improves the efficiency of our method. At last, the cross-frame affinities strengthened by SAR and MAA are adopted for adaptively aggregating temporal information. Our experiments demonstrate that the proposed method performs favorably against state-of-the-art VSS methods. The code is publicly available at https://github.com/GuoleiSun/VSS-MRCFA

cs.CV↗

arXiv2022

TreeMix: Compositional Constituency-based Data Augmentation for Natural Language Understanding

Data augmentation is an effective approach to tackle over-fitting. Many previous works have proposed different data augmentations strategies for NLP, such as noise injection, word replacement, back-translation etc. Though effective, they missed one important characteristic of language--compositionality, meaning of a complex expression is built from its sub-parts. Motivated by this, we propose a compositional data augmentation approach for natural language understanding called TreeMix. Specifically, TreeMix leverages constituency parsing tree to decompose sentences into constituent sub-structures and the Mixup data augmentation technique to recombine them to generate new sentences. Compared with previous approaches, TreeMix introduces greater diversity to the samples generated and encourages models to learn compositionality of NLP data. Extensive experiments on text classification and SCAN demonstrate that TreeMix outperforms current state-of-the-art data augmentation methods.

cs.CL↗

arXiv2022

Anomalous Hall Effect and Perpendicular Magnetic Anisotropy in Ultrathin Ferrimagnetic NiCo$_2$O$_4$ Films

The inverse spinel ferrimagnetic NiCo$_2$O$_4$ possesses high magnetic Curie temperature $T_C$, high spin polarization, and strain-tunable magnetic anisotropy. Understanding the thickness scaling limit of these intriguing magnetic properties in NiCo$_2$O$_4$ thin films is critical for their implementation in nanoscale spintronic applications. In this work, we report the unconventional magnetotransport properties of epitaxial (001) NiCo$_2$O$_4$ films on MgAl$_2$O$_4$ substrates in the ultrathin limit. Anomalous Hall effect measurements reveal strong perpendicular magnetic anisotropy for films down to 1.5 unit cell (1.2 nm), while $T_C$ for 3 unit cell and thicker films remains above 300 K. The sign change in the anomalous Hall conductivity ($σ_{xy}$) and its scaling relation with the longitudinal conductivity ($σ_{xx}$) can be attributed to the competing effects between impurity scattering and band intrinsic Berry curvature, with the latter vanishing upon the thickness driven metal-insulator transition. Our study reveals the critical role of film thickness in tuning the relative strength of charge correlation, Berry phase effect, spin orbit interaction, and impurity scattering, providing important material information for designing scalable epitaxial magnetic tunnel junctions and sensing devices using NiCo$_2$O$_4$.

cond-mat.mtrl-sci↗

arXiv2022

Strong Neel ordering and luminescence correlation in a two-dimensional antiferromagnet

Magneto-optical effect has been widely used in light modulation, optical sensing and information storage. Recently discovered two-dimensional (2D) van der Waals layered magnets are considered as promising platforms for investigating novel magneto-optical phenomena and devices, due to the long-range magnetic ordering down to atomically-thin thickness, rich species and tunable properties. However, majority 2D antiferromagnets suffer from low luminescence efficiency which hinders their magneto-optical investigations and applications. Here, we uncover strong light-magnetic ordering interactions in 2D antiferromagnetic MnPS3 utilizing a newly-emerged near-infrared photoluminescence (PL) mode far below its intrinsic bandgap. This ingap PL mode shows strong correlation with the Neel ordering and persists down to monolayer thickness. Combining the DFT, STEM and XPS, we illustrate the origin of the PL mode and its correlation with Neel ordering, which can be attributed to the oxygen ion-mediated states. Moreover, the PL strength can be further tuned and enhanced using ultraviolet-ozone treatment. Our studies offer an effective approach to investigate light-magnetic ordering interactions in 2D antiferromagnetic semiconductors.

physics.optics↗

arXiv2022

SUBS: Subtree Substitution for Compositional Semantic Parsing

Although sequence-to-sequence models often achieve good performance in semantic parsing for i.i.d. data, their performance is still inferior in compositional generalization. Several data augmentation methods have been proposed to alleviate this problem. However, prior work only leveraged superficial grammar or rules for data augmentation, which resulted in limited improvement. We propose to use subtree substitution for compositional data augmentation, where we consider subtrees with similar semantic functions as exchangeable. Our experiments showed that such augmented data led to significantly better performance on SCAN and GeoQuery, and reached new SOTA on compositional split of GeoQuery.

cs.CL↗

arXiv2022

Probing Simile Knowledge from Pre-trained Language Models

Simile interpretation (SI) and simile generation (SG) are challenging tasks for NLP because models require adequate world knowledge to produce predictions. Previous works have employed many hand-crafted resources to bring knowledge-related into models, which is time-consuming and labor-intensive. In recent years, pre-trained language models (PLMs) based approaches have become the de-facto standard in NLP since they learn generic knowledge from a large corpus. The knowledge embedded in PLMs may be useful for SI and SG tasks. Nevertheless, there are few works to explore it. In this paper, we probe simile knowledge from PLMs to solve the SI and SG tasks in the unified framework of simile triple completion for the first time. The backbone of our framework is to construct masked sentences with manual patterns and then predict the candidate words in the masked position. In this framework, we adopt a secondary training process (Adjective-Noun mask Training) with the masked language model (MLM) loss to enhance the prediction diversity of candidate words in the masked position. Moreover, pattern ensemble (PE) and pattern search (PS) are applied to improve the quality of predicted words. Finally, automatic and human evaluations demonstrate the effectiveness of our framework in both SI and SG tasks.

cs.CL↗