arXiv subjects

L. Corner

Publications and source records attributed to L. Corner.

14 recordsLinked to original sources

arXiv2025

Contribution of ALEGRO to the Update of the European Strategy on Particle Physics

Advanced and novel accelerators (ANAs), driven a by laser pulse or a relativistic particle bunch, have made remarkable progress over the last decades. They accelerated electrons by 10GeV in 30cm (laser driven) and by 42GeV in 85cm (particle bunch driven). Rapid progress continues with lasers, plasma sources, computational methods, and more. In this document we highlight the main contributions made by the various major collaborations, facilities, and experiments that develop ANAs for applications to particle and high-energy physics. These include: ALiVE, ANL-AWA, AWAKE, BNL-ATF, CEPC Injector, DESY-KALDERA, ELI ERIC, EuPRAXIA, HALHF, LBNL-BELLA, LBNL-kBELLA, LCvison, PETRA IV Injector, 10TeV Collider design, SLAC-FACET II, as well as the development of structures, lasers and plasma sources, and sustainability, and demonstrate the intense activities in the field. ANAs can have, and already have, applications to particle and high-energy physics as subsystems, the so-called intermediate applications: injectors, lower energy experiments, beam dump experiments, test beds for detectors, etc. Additionally, an ANA could be an upgrade for any Higgs factory based on a linear accelerator, as proposed in the LCvison project. ANAs have advantages over other concepts for reaching multi-TeV energies: lower geographical and environmental footprints, higher luminosity to power ratio, and are thus more sustainable than other accelerators. However, ANAs must still meet a number of challenges before they can produce bunches with parameters and the luminosity required for a linear collider at the energy frontier. It is therefore extremely important to strongly support vigorous R&D of ANAs, because they are, at this time, the most sustainable acceleration scheme to reach very high energies with a linear accelerator.

physics.acc-ph↗

arXiv2025

The Linear Collider Facility (LCF) at CERN

In this paper we outline a proposal for a Linear Collider Facility as the next flagship project for CERN. It offers the opportunity for a timely, cost-effective and staged construction of a new collider that will be able to comprehensively map the Higgs boson's properties, including the Higgs field potential, thanks to a large span in centre-of-mass energies and polarised beams. A comprehensive programme to study the Higgs boson and its closest relatives with high precision requires data at centre-of-mass energies from the Z pole to at least 1 TeV. It should include measurements of the Higgs boson in both major production mechanisms, ee -> ZH and ee -> vvH, precision measurements of gauge boson interactions as well as of the W boson, Higgs boson and top-quark masses, measurement of the top-quark Yukawa coupling through ee ->ttH, measurement of the Higgs boson self-coupling through HH production, and precision measurements of the electroweak couplings of the top quark. In addition, ee collisions offer discovery potential for new particles complementary to HL-LHC.

hep-ex↗

arXiv2025

A Linear Collider Vision for the Future of Particle Physics

In this paper we review the physics opportunities at linear $e^+e^-$ colliders with a special focus on high centre-of-mass energies and beam polarisation, take a fresh look at the various accelerator technologies available or under development and, for the first time, discuss how a facility first equipped with a technology mature today could be upgraded with technologies of tomorrow to reach much higher energies and/or luminosities. In addition, we will discuss detectors and alternative collider modes, as well as opportunities for beyond-collider experiments and R\&D facilities as part of a linear collider facility (LCF). The material of this paper will support all plans for $e^+e^-$ linear colliders and additional opportunities they offer, independently of technology choice or proposed site, as well as R\&D for advanced accelerator technologies. This joint perspective on the physics goals, early technologies and upgrade strategies has been developed by the LCVision team based on an initial discussion at LCWS2024 in Tokyo and a follow-up at the LCVision Community Event at CERN in January 2025. It heavily builds on decades of achievements of the global linear collider community, in particular in the context of CLIC and ILC.

hep-ex↗

arXiv2024

Technical Status Report on Plasma Components and Systems in the context of EuPRAXIA

The EuPRAXIA project aims to construct two state-of-the-art accelerator facilities based on plasma accelerator technology. Plasma-based accelerators offer the possibility of a significant reduction in facility size and cost savings over current radio frequency (RF) accelerators. The two facilities - one laser-driven one a beam-driven - are envisioned to provide electron beams with an energy in the range of 1-5 GeV and beam quality comparable to existing RF machines. This will enable a versatile portfolio of applications from compact free-electron laser (FEL) drivers to sources for medical and industrial imaging. At the heart of both facilities is the use of plasma-based accelerator components and systems which encompass not only the accelerating medium itself, but also a range of auxiliary systems such as plasma-based electron beam optics and plasma-based mirrors for high-intensity lasers. From a technical standpoint, a high-degree of control over these plasma devices will be essential for EuPRAXIA to achieve its target performance goals. The ability to diagnose and characterize these plasma devices and to simulate their operation will be further essential success factors. Additionally, compatibility with extended operation at high-repetition rates and integration into the accelerator beamline will also prove crucial. In this work, we aim to review the current status of plasma components and related systems for both laser-driven and beam-driven plasma accelerators and to assess challenges to be addressed regarding implementation at future EuPRAXIA facilities.

physics.plasm-ph↗

arXiv2023

Measurement of the decay of laser-driven linear plasma wakefields

We present the first measurements of the temporal decay rate of one-dimensional, linear Langmuir waves excited by an ultra-short laser pulse. Langmuir waves with relative amplitudes of approximately $6\%$ were driven by $1.7$ J, $50$ fs laser pulses in hydrogen and deuterium plasmas of density $n_{e0} = 8.4 \times 10^{17}$ cm$^{-3}$. The wakefield lifetimes were measured to be $\tau^\mathrm{H_2}_\mathrm{wf} = (9\pm2)$ ps and $\tau^\mathrm{D_2}_\mathrm{wf} = (16\pm8)$ ps respectively for hydrogen and deuterium. The experimental results were found to be in good agreement with 2D particle-in-cell simulations. In addition to being of fundamental interest, these results are particularly relevant to the development of laser wakefield accelerators (LWFAs) and wakefield acceleration schemes using multiple pulses, such as multi-pulse laser wakefield accelerators (MP-LWFAs).

physics.plasm-ph↗

arXiv2023

Demonstration of tunability of HOFI waveguides via start-to-end simulations

In recent years, hydrodynamic optical-field-ionized (HOFI) channels have emerged as a promising technique to create laser waveguides suitable for guiding tightly-focused laser pulses in a plasma, as needed for laser-plasma accelerators. While experimental advances in HOFI channels continue to be made, the underlying mechanisms and the roles of the main parameters remain largely unexplored. In this work, we propose a start-to-end simulation pipeline of the HOFI channel formation and the resulting guiding properties, and use it to explore the underlying physics and the tunability of HOFI channels. This approach is benchmarked against experimental measurements. HOFI channels are shown to feature excellent guiding properties over a wide range of parameters, making them a promising and tunable waveguide option for laser-plasma accelerators.

physics.plasm-ph↗

arXiv2022

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

physics.acc-ph↗

arXiv2020

Meter-Scale, Conditioned Hydrodynamic Optical-Field-Ionized Plasma Channels

We demonstrate through experiments and numerical simulations that low-density, low-loss, meter-scale plasma channels can be generated by employing a conditioning laser pulse to ionize the neutral gas collar surrounding a hydrodynamic optical-field-ionized (HOFI) plasma channel. We use particle-in-cell simulations to show that the leading edge of the conditioning pulse ionizes the neutral gas collar to generate a deep, low-loss plasma channel which guides the bulk of the conditioning pulse itself as well as any subsequently injected pulses. In proof-of-principle experiments we generate conditioned HOFI (CHOFI) waveguides with axial electron densities of $n_\mathrm{e0} \approx 1 \times 10^{17} \; \mathrm{cm^{-3}}$, and a matched spot size of $26 \; \mathrm{\mu m}$. The power attenuation length of these CHOFI channels is $L_\mathrm{att} = (21 \pm 3) \; \mathrm{m}$, more than two orders of magnitude longer than achieved by HOFI channels. Hydrodynamic and particle-in-cell simulations demonstrate that meter-scale CHOFI waveguides with attenuation lengths exceeding 1 m could be generated with a total laser pulse energy of only $1.2$ J per meter of channel. The properties of CHOFI channels are ideally suited to many applications in high-intensity light-matter interactions, including multi-GeV plasma accelerator stages operating at high pulse repetition rates.

physics.acc-ph↗

arXiv2020

Guiding of high-intensity laser pulses in 100mm-long hydrodynamic optical-field-ionized plasma channels

Hydrodynamic optically-field-ionized (HOFI) plasma channels up to 100mm long are investigated. Optical guiding is demonstrated of laser pulses with a peak input intensity of $6\times10^{17}$ W cm$^{-2}$ through 100mm long plasma channels with on-axis densities measured interferometrically to be as low as $n_{e0} = (1.0\pm0.3)\times10^{17}$cm$^{-3}$. Guiding is also observed at lower axial densities, which are inferred from magneto-hydrodynamic simulations to be approximately $7\times10^{16}$cm$^{-3}$. Measurements of the power attenuation lengths of the channels are shown to be in good agreement with those calculated from the measured transverse electron density profiles. To our knowledge, the plasma channels investigated in this work are the longest, and have the lowest on-axis density, of any free-standing waveguide demonstrated to guide laser pulses with intensities above $>10^{17}$ W cm$^{-2}$.

physics.acc-ph↗

arXiv2019

Low-Density Hydrodynamic Optical-Field-Ionized Plasma Channels Generated With An Axicon Lens

We demonstrate optical guiding of high-intensity laser pulses in long, low density hydrodynamic optical-field-ionized (HOFI) plasma channels. An axicon lens is used to generate HOFI plasma channels with on-axis electron densities as low as $n_e(0) = 1.5\times 10^{17}\, \mathrm{cm}^{-3}$ and matched spot sizes in the range $ 20 \mu \mathrm{m} \lesssim W_M \lesssim 40 \mu \mathrm{m}$. Control of these channel parameters via adjustment of the initial cell pressure and the delay after the arrival of the channel-forming pulse is demonstrated. For laser pulses with a peak axial intensity of $4 \times 10^{17}\, \mathrm{W\,cm}^{-2}$, highly reproducible, high-quality guiding over more than 14 Rayleigh ranges is achieved at a pulse repetition rate of 5 Hz, limited by the available channel-forming laser and vacuum pumping system. Plasma channels of this type would seem to be well suited to multi-GeV laser wakefield accelerators operating in the quasi-linear regime.

physics.plasm-ph↗

arXiv2014

High Power Fibre Laser System for a High Repetition Rate Laserwire

We present the development of a high power fibre laser system to investigate its suitability for use in a transverse electron beam profile monitor i.e. a laserwire. A system capable of producing individual pulses up to $165.8 \pm 0.4 \mu$J at 1036 nm with a full-width at half-maximum of $1.92 \pm 0.12$ps at 6.49 MHz is demonstrated using a master oscillator power amplifier design with a final amplification stage in a rod-type photonic crystal fibre. The pulses are produced in trains of 1 ms in a novel burst mode amplification scheme to match the bunch pattern of the charged particles in an accelerator. This method allows pulse energies up to an order of magnitude greater than the steady-state value of $17.0 \pm 0.6 \mu$J to be achieved at the beginning of the burst with a demonstrated peak power of $25.8 \pm 1.7$ MW after compression. The system is also shown to demonstrate excellent spatial quality with an $M^{2} = 1.26 \pm 0.01$ in both dimensions which would allow nearly diffraction limited focussing to be achieved.

physics.acc-ph↗

arXiv2014

Fibre Lasers for Gamma Colliders

The required lasers parameters for recently proposed gamma collider Higgs factories are presented and reviewed in the context of new developments in high average and peak power fibre laser technology. A possible laser architecture based on fibres is proposed and some issues surrounding high average power frequency conversion to the wavelengths required for a gamma collider are discussed.

physics.acc-ph↗

arXiv2014

Laserwire at the Accelerator Test Facility 2 with Sub-Micrometre Resolution

A laserwire transverse electron beam size measurement system has been developed and operated at the Accelerator Test Facility 2 (ATF2) at KEK. Special electron beam optics were developed to create an approximately 1 x 100 {\mu}m (vertical x horizontal) electron beam at the laserwire location, which was profiled using a 150 mJ, 71 ps laser pulse with a wavelength of 532 nm. The precise characterisation of the laser propagation allows the non-Gaussian transverse profiles of the electron beam caused by the laser divergence to be deconvolved. A minimum vertical electron beam size of 1.07 ${\pm}$ 0.06 (stat.) ${\pm}$ 0.05 (sys.) {\mu}m was measured. A vertically focussing quadrupole just before the laserwire was varied whilst making laserwire measurements and the projected vertical emittance was measured to be 82.56 ${\pm}$ 3.04 pm rad.

physics.acc-ph↗

arXiv2014

Multi-Pulse Laser Wakefield Acceleration: A New Route to Efficient, High-Repetition-Rate Plasma Accelerators and High Flux Radiation Sources

Laser-driven plasma accelerators can generate accelerating gradients three orders of magnitude larger than radio-frequency accelerators and have achieved beam energies above 1 GeV in centimetre long stages. However, the pulse repetition rate and wall-plug efficiency of plasma accelerators is limited by the driving laser to less than approximately 1 Hz and 0.1% respectively. Here we investigate the prospects for exciting the plasma wave with trains of low-energy laser pulses rather than a single high-energy pulse. Resonantly exciting the wakefield in this way would enable the use of different technologies, such as fibre or thin-disc lasers, which are able to operate at multi-kilohertz pulse repetition rates and with wall-plug efficiencies two orders of magnitude higher than current laser systems. We outline the parameters of efficient, GeV-scale, 10-kHz plasma accelerators and show that they could drive compact X-ray sources with average photon fluxes comparable to those of third-generation light source but with significantly improved temporal resolution. Likewise FEL operation could be driven with comparable peak power but with significantly larger repetition rates than extant FELs.

physics.acc-ph↗