arXiv ScienceSearch

arXiv subjects

L. Cabras

Publications and source records attributed to L. Cabras.

12 recordsLinked to original sources

Dynamics of elastic lattices with sliding constraints

This study investigates the impact of sliders -- constraints acting on elastic rods allowing for a transverse displacement jump while maintaining axial and rotational displacement continuity -- on the dynamics of a periodic elastic grid, including the effects of axial preload. The grid is linearly elastic and subject to in-plane incremental deformation, involving normal and shear forces and bending moment. The periodicity of the infinite grid permits a Floquet-Bloch wave analysis and a rigorous dynamic homogenization, leading to an equivalent prestressed elastic solid. The investigation is complemented by {\it ad hoc} developed F.E. simulations and perturbations with a pulsating Green's function. Results show that the sliders create band gaps, flat bands, and Dirac cones in the dispersion diagrams and generate macro-instability even for tensile prestress. The latter corresponds to the loss of ellipticity at the parabolic boundary in the equivalent elastic solid and provides a rare example of an almost unexplored form of material instability. Therefore, our results offer design strategies for metamaterials and architected materials showing reversible material instabilities and filtering properties for mechanical signals.

physics.class-ph

A two-mechanism and multiscale compatible approach for solid state electrolytes of (Li-ion) batteries

All solid state batteries are claimed to be the next-generation battery system, in view of their safety accompanied by high energy densities. A new advanced, multiscale compatible, and fully three dimensional model for solid electrolytes is presented in this note. The response of the electrolyte is profoundly studied theoretically and numerically, analyzing the equilibrium and steady state behaviors, the limiting factors, as well as the most relevant constitutive parameters according to the sensitivity analysis of the model.

physics.app-ph

Quantitative investigation of the influence of electrode morphology in the electro-chemo-mechanical response of Li-ion batteries

In Li-ion batteries the electrochemical potential drives the redox reactions occurring at the interface between electrolyte and storage material, typically active particles for porous electrodes, allowing Li ions intercalation/extraction from electrodes. The limiting factor of the process is not solely related to the electrochemical affinity, but also to structural features as the morphology of the electrodes. In this note, the relevance of the electrodes architecture is investigated numerically, in terms of the electro-chemo-mechanical response of a battery cell with homogeneous electrodes and conventional liquid electrolyte. A suitable design of the electrodes induces major increments of battery efficiency.

physics.app-ph

A novel two-mechanism full battery model for solid state Li-ion batteries: review and comparisons

In recent years there has been a major interest in developing all solid state batteries, for the sake of safety (issues due to toxic and flammable organic liquid electrolytes are well known) as well as of high energy density \cite{SCHNELL2018160,Zheng2018}. Side by side to experimental investigations, computational simulations \cite{GrazioliEtAlCM2016} unveil the several physics that interconnect at different scales \cite{LiMonroeARCBM2020} during battery operations. %Several advanced mathematical models have therefore been published \cite{bistriM2020}. We propose herein a new advanced model, which is multiscale compatible and fully three dimensional in nature. Furthermore, we review some classical or inspiring models, highlighting the conceptual evolutions that are ultimately collected in our work. The model is validated against experimental evidences of a Li/LiPON/LiCoO$_2$ thin film battery published in \cite{Danilovetal2011}.

cond-mat.mtrl-sci

Incremental constitutive tensors and strain localization for prestressed elastic lattices: Part II -- incremental dynamics

Floquet-Bloch wave asymptotics is used to homogenize the in-plane mechanical response of a periodic grillage of elastic Rayleigh rods, possessing a distributed mass density, together with rotational inertia. The grid is subject to incremental time-harmonic dynamic motion, superimposed to a given state of axial loading of arbitrary magnitude. In contrast to the quasi-static energy match (addressed in Part I of the present study), the vibrational properties of the lattice are directly represented by the acoustic tensor of the equivalent solid (without passing through the constitutive tensor). The acoustic tensor is shown to be independent of the rods' rotational inertia and allows the analysis of strong ellipticity of the equivalent continuum, evidencing coincidence with macro-bifurcation in the lattice. On the other hand, micro-bifurcation corresponds to a vibration of vanishing frequency of the lowest dispersion branch of the lattice, occurring at finite wavelength. Dynamic homogenization reveals the structure of the acoustic branches close to ellipticity loss and the analysis of forced vibrations (both in physical space and Fourier space) shows low-frequency wave localizations. A comparison is presented between strain localization occurring near ellipticity loss and forced vibration of the lattice, both corresponding to the application of a concentrated pulsating force. The comparison shows that the homogenization technique allows an almost perfect representation of the lattice, with the exception of cases where micro-bifurcation occurs, which is shown to leave the equivalent solid unaffected. Therefore, the presented results pave the way for the design of architected cellular materials to be used in applications where extreme deformations are involved.

physics.class-ph

Incremental constitutive tensors and strain localization for prestressed elastic lattices: Part I -- quasi-static response

A lattice of elastic rods organized in a parallelepiped geometry can be axially loaded up to an arbitrary amount without distortion and then be subject to incremental displacements. Using quasi-static homogenization theory, this lattice can be made equivalent to a prestressed elastic solid subject to incremental deformation, in such a way to obtain extremely localized mechanical responses. These responses can be analyzed with reference to a mechanical model which can, in principle, be realized, so that features such as for instance shear bands inclination, or emergence of a single shear band, or competition between micro (occurring in the lattice but not in the equivalent solid) and macro (present in both the lattice and the equivalent continuum) instabilities become all designable features. The analysis of localizations is performed using a Green's function-based perturbative approach to highlight the correspondence between micromechanics of the composite and homogenized response of the equivalent solid. The presented results, limited to quasi-static behaviour, provide a new understanding of strain localization in a continuum and open new possibilities for the realization and experimentation of materials exhibiting these extreme mechanical behaviours. Dynamic homogenization and vibrational localization are deferred to Part II of this study.

physics.class-ph

Prestress tuning of negative refraction and wave channeling from flexural sources

The quest for wave channeling and manipulation has driven a strong research effort on topological and architected materials, capable of propagating localized electromagnetical or mechanical signals. With reference to an elastic structural grid, which elements can sustain both axial and flexural deformations, it is shown that material interfaces can be created with structural properties tuned by prestress states to achieve total reflection, negative refraction, and strongly localized signal channeling. The achievement of a flat lens and topologically localized modes is demonstrated and tunability of the system allows these properties to hold for a broad range of wavelengths. An ingredient to obtain these effects is the use, suggested here and never attempted before, of concentrated pulsating moments. The important aspect of the proposed method is that states of prestress can be easily removed or changed to tune with continuity the propagational characteristics of the medium, so that a new use of vibration channeling and manipulation is envisaged for elastic materials.

physics.class-ph

Free and forced wave propagation in a Rayleigh-beam grid: flat bands, Dirac cones, and vibration localization vs isotropization

In-plane wave propagation in a periodic rectangular grid beam structure, which includes rotational inertia (so-called 'Rayleigh beams'), is analyzed both with a Floquet-Bloch exact formulation for free oscillations and with a numerical treatment (developed with PML absorbing boundary conditions) for forced vibrations (including Fourier representation and energy flux evaluations), induced by a concentrated force or moment. A complex interplay is observed between axial and flexural vibrations (not found in the common idealization of out-of-plane motion), giving rise to several forms of vibration localization: 'X-', 'cross-' and 'star-' shaped, and channel propagation. These localizations are triggered by several factors, including rotational inertia and slenderness of the beams and the type of forcing source (concentrated force or moment). Although the considered grid of beams introduces an orthotropy in the mechanical response, a surprising 'isotropization' of the vibration is observed at special frequencies. Moreover, rotational inertia is shown to 'sharpen' degeneracies related to Dirac cones (which become more pronounced when the aspect ratio of the grid is increased), while the slenderness can be tuned to achieve a perfectly flat band in the dispersion diagram. The obtained results can be exploited in the realization of metamaterials designed to control wave propagation.

physics.class-ph

Floquet-Bloch waves in periodic networks of the Rayleigh beams: honeycomb systems, dispersion degeneracies and structured interfaces

The paper addresses novel dispersion properties of elastic flexural waves in periodic structures which possess rotational inertia. The structure is represented as a lattice, whose elementary links are formally defined as the Rayleigh beams. Although in the quasi-static regime such beams respond similarly to the classical Euler-Bernoulli beams, as the frequency increases the dispersion of flexural waves possesses new interesting features. For a doubly periodic lattice, we give a special attention to degeneracies associated with so-called Dirac cones on the dispersion surfaces as well as directional anisotropy. Comparative analysis for Floquet-Bloch waves in periodic flexural lattices of different geometries is presented and accompanied by numerical simulations.

physics.class-ph

Rotational inertia interface in a dynamic lattice of flexural beams

The paper presents a novel analysis of a transmission problem for a network of flexural beams incorporating conventional Euler-Bernoulli beams as well as Rayleigh beams with the enhanced rotational inertia. Although, in the low-frequency regime, these beams have a similar dynamic response, we have demonstrated novel features which occur in the transmission at higher frequencies across the layer of the Rayleigh beams.

physics.class-ph

Dispersion degeneracies and standing modes in flexural waves supported by Rayleigh beam structures

The paper presents a novel analysis of Floquet-Bloch flexural waves in a periodic lattice-like structure consisting of flexural beam ligaments. A special feature of this structure is in the presence of the rotational inertia, which is commonly neglected in conventional models of the Euler-Bernoulli type. The dispersion properties of the Rayleigh beam structure with rotational inertia include degeneracies linked to Dirac cones on the dispersion diagrams as well as directional anisotropy and special refraction properties. Steering of Dirac cones is described for rectangular flexural structures with a rotational inertia. Numerical examples for a forced network of Rayleigh and Euler-Bernoulli beams illustrate directional localisation, negative refraction, localisation at an interface and neutrality for propagating plane waves across a structured interface for a frequency range corresponding to a Dirac cone.

cond-mat.mtrl-sci

Auxetic two-dimensional lattice with Poisson's Ratio arbitrarily close to -1

In this paper we propose a new lattice structure having macroscopic Poisson's ratio arbitrarily close to the stability limit -1. We tested experimentally the effective Poisson's ratio of the micro-structured medium; the uniaxial test has been performed on a thermoplastic lattice produced with a 3d printing technology. A theoretical analysis of the effective properties has been performed and the expression of the macroscopic constitutive properties is given in full analytical form as a function of the constitutive properties of the elements of the lattice and on the geometry of the microstructure. The analysis has been performed on three micro-geometry leading to an isotropic behaviour for the cases of three-fold and six-fold symmetry and to a cubic behaviour for the case of four-fold symmetry.

physics.class-ph