arXiv subjects

Koen Classens

Publications and source records attributed to Koen Classens.

13 recordsLinked to original sources

arXiv2026

Closed-loop Optimal Fault Detection for Uncertain Systems

Faults compromise the reliability and safety of complex engineering systems. The aim of this article is to address the problem of robust fault detection filter design for continuous-time linear time-invariant uncertain systems in open-loop or closed-loop configurations. The developed method offers a unified approach to handle parametric and dynamic uncertainties by solving a single Riccati equation, based on a worst-case disturbance and uncertainty model. This worst-case model is obtained by nonlinear optimization and application of the boundary Nevanlinna-Pick method. The efficacy of the proposed approach is demonstrated using an uncertain model of an experimental reticle stage used in the lithography industry. The results illustrate that an optimal compromise is achieved between sensitivity to faults and rejection of modelling uncertainties and disturbances on the other hand. This capability enables the clear differentiation between faults and undesired effects in residuals, thereby enhancing fault detection reliability, ultimately contributing to improved safety and performance of machines.

eess.SY↗

arXiv2026

Nullspace-based Fault Diagnosis for Closed-Loop Mechatronic Systems with Application to Semiconductor Equipment

Fault detection and isolation (FDI) systems are critical for modern mechatronic production equipment, as their continuous operation is heavily dependent on the ability to detect and isolate faults in a timely and efficient manner. The aim of this paper is to address closed-loop aspects for linear systems and enable the application of well-known nullspace-based FDI synthesis conditions to mechatronic systems subject to actuator and sensor faults. These tailored FDI synthesis conditions are applied to a large-scale prototype wafer stage, showcasing the proposed approach through real experiments, thereby underlining the usefulness of the derived synthesis conditions for a wide range of production machines and scientific instruments.

eess.SY↗

arXiv2025

Finite Sample MIMO System Identification with Multisine Excitation: Nonparametric, Direct, and Two-step Parametric Estimators

Multisine excitations are widely used for identifying multi-input multi-output systems due to their periodicity, data compression properties, and control over the input spectrum. Despite their popularity, the finite sample statistical properties of frequency-domain estimators under multisine excitation, for both nonparametric and parametric settings, remain insufficiently understood. This paper develops a finite-sample statistical framework for least-squares estimation of the frequency response function (FRF) and its implications for parametric modeling. First, we derive exact distributional and covariance properties of the FRF estimator, explicitly accounting for aliasing effects under slow sampling regimes, and establish conditions for unbiasedness, uncorrelatedness, and consistency across multiple experiments. Second, we show that the FRF estimate is a sufficient statistic for any parametric model under Gaussian noise, leading to an exact equivalence between optimal two stage frequency-domain methods and time-domain prediction error and maximum likelihood estimation. This equivalence is shown to yield finite-sample concentration bounds for parametric maximum likelihood estimators, enabling rigorous uncertainty quantification, and closed-form prediction error method estimators without iterative optimization. The theoretical results are demonstrated in a representative case study.

stat.ME↗

arXiv2025

Structured identification of multivariable modal systems

Physically interpretable models are essential for next-generation industrial systems, as these representations enable effective control, support design validation, and provide a foundation for monitoring strategies. The aim of this paper is to develop a system identification framework for estimating modal models of complex multivariable mechanical systems from frequency response data. To achieve this, a two-step structured identification algorithm is presented, where an additive model is first estimated using a refined instrumental variable method and subsequently projected onto a modal form. The developed identification method provides accurate, physically-relevant, minimal-order models, for both generally-damped and proportionally damped modal systems. The effectiveness of the proposed method is demonstrated through experimental validation on a prototype wafer-stage system, which features a large number of spatially distributed actuators and sensors and exhibits complex flexible dynamics.

eess.SY↗

arXiv2025

Statistically Optimal Structured Additive MIMO Continuous-time System Identification

Many applications in mechanical, acoustic, and electronic engineering require estimating complex dynamical models, often represented as additive multi-input multi-output (MIMO) transfer functions with structural constraints. This paper introduces a two-stage procedure for estimating structured additive MIMO models, where structural constraints are enforced through a weighted nonlinear least-squares projection of the parameter vector initially estimated using a recently developed refined instrumental variables algorithm. The proposed approach is shown to be consistent and asymptotically efficient in open-loop scenarios. In closed-loop settings, it remains consistent despite potential noise model misspecification and achieves minimum covariance among all instrumental variable estimators. Extensive simulations are performed to validate the theoretical findings, and to show the efficacy of the proposed approach.

eess.SY↗

arXiv2025

Recursive Identification of Structured Systems: An Instrumental-Variable Approach Applied to Mechanical Systems

Online system identification algorithms are widely used for monitoring, diagnostics and control by continuously adapting to time-varying dynamics. Typically, these algorithms consider a model structure that lacks parsimony and offers limited physical interpretability. The objective of this paper is to develop a real-time parameter estimation algorithm aimed at identifying time-varying dynamics within an interpretable model structure. An additive model structure is adopted for this purpose, which offers enhanced parsimony and is shown to be particularly suitable for mechanical systems. The proposed approach integrates the recursive simplified refined instrumental variable method with block-coordinate descent to minimize an exponentially-weighted output error cost function. This novel recursive identification method delivers parametric continuous-time additive models and is applicable in both open-loop and closed-loop controlled systems. Its efficacy is shown using numerical simulations and is further validated using experimental data to detect the time-varying resonance dynamics of a flexible beam system. These results demonstrate the effectiveness of the proposed approach for online and interpretable estimation for advanced monitoring and control applications.

eess.SY↗

arXiv2025

Identification of additive multivariable continuous-time systems

Multivariable parametric models are critical for designing, controlling, and optimizing the performance of engineered systems. The main aim of this paper is to develop a parametric identification strategy that delivers accurate and physically relevant models of multivariable systems using time-domain data. The introduced approach adopts an additive model structure, providing a parsimonious and interpretable representation of many physical systems, and applies a refined instrumental variable-based estimation algorithm. The developed identification method enables the estimation of multivariable parametric additive models in continuous time and is applicable to both open- and closed-loop systems. The performance of the estimator is demonstrated through numerical simulations and experimentally validated on a flexible beam system.

eess.SP↗

arXiv2025

Local Rational Modeling for Identification Beyond the Nyquist Frequency: Applied to a Prototype Wafer Stage

Fast-rate models are essential for control design, specifically to address intersample behavior. The aim of this paper is to develop a frequency-domain non-parametric identification technique to estimate fast-rate models of systems that have relevant dynamics and allow for actuation above the Nyquist frequency of a slow-rate output. Examples of such systems include vision-in-the-loop systems. Through local rational models over multiple frequency bands, aliased components are effectively disentangled, particularly for lightly-damped systems. The developed technique accurately determines non-parametric fast-rate models of systems with slow-rate outputs, all within a single identification experiment. Finally, the effectiveness of the technique is demonstrated through experiments conducted on a prototype wafer stage used for semiconductor manufacturing.

eess.SY↗

arXiv2024

Statistical Analysis of Block Coordinate Descent Algorithms for Linear Continuous-time System Identification

Block coordinate descent is an optimization technique that is used for estimating multi-input single-output (MISO) continuous-time models, as well as single-input single output (SISO) models in additive form. Despite its widespread use in various optimization contexts, the statistical properties of block coordinate descent in continuous-time system identification have not been covered in the literature. The aim of this paper is to formally analyze the bias properties of the block coordinate descent approach for the identification of MISO and additive SISO systems. We characterize the asymptotic bias at each iteration, and provide sufficient conditions for the consistency of the estimator for each identification setting. The theoretical results are supported by simulation examples.

eess.SY↗

arXiv2024

Identification of Additive Continuous-time Systems in Open and Closed loop

When identifying electrical, mechanical, or biological systems, parametric continuous-time identification methods can lead to interpretable and parsimonious models when the model structure aligns with the physical properties of the system. Traditional linear system identification may not consider the most parsimonious model when relying solely on unfactored transfer functions, which typically result from standard direct approaches. This paper presents a novel identification method that delivers additive models for both open and closed-loop setups. The estimators that are derived are shown to be generically consistent, and can admit the identification of marginally stable additive systems. Numerical simulations show the efficacy of the proposed approach, and its performance in identifying a modal representation of a flexible beam is verified using experimental data.

eess.SY↗

arXiv2023

Direct Shaping of Minimum and Maximum Singular Values: An $\mathcal{H}_{-}/\mathcal{H}_{\infty}$ Synthesis Approach for Fault Detection Filters

The performance of fault detection filters relies on a high sensitivity to faults and a low sensitivity to disturbances. The aim of this paper is to develop an approach to directly shape these sensitivities, expressed in terms of minimum and maximum singular values. The developed method offers an alternative solution to the $\mathcal{H}_{-}/\mathcal{H}_{\infty}$ synthesis problem, building upon traditional multiobjective synthesis results. The result is an optimal filter synthesized via iterative convex optimization and the approach is particularly useful for fault diagnosis as illustrated by a numerical example.

eess.SY↗

arXiv2022

Cross-Coupled Iterative Learning Control for Complex Systems: A Monotonically Convergent and Computationally Efficient Approach

Cross-coupled iterative learning control (ILC) can achieve high performance for manufacturing applications in which tracking a contour is essential for the quality of a product. The aim of this paper is to develop a framework for norm-optimal cross-coupled ILC that enables the use of exact contour errors that are calculated offline, and iteration- and time-varying weights. Conditions for the monotonic convergence of this iteration-varying ILC algorithm are developed. In addition, a resource-efficient implementation is proposed in which the ILC update law is reframed as a linear quadratic tracking problem, reducing the computational load significantly. The approach is illustrated on a simulation example.

eess.SY↗

arXiv2022

Feedback linearisation of mechanical systems using data-driven models

Linearising the dynamics of nonlinear mechanical systems is an important and open research area. A common approach is feedback linearisation, which is a nonlinear control method that transforms the input-output response of a nonlinear system into an equivalent linear one. The main problem with feedback linearisation is that it requires an accurate first-principles model of the system, which are typically hard to obtain. In this paper, we design an alternative control approach that exploits data-driven models to linearise the input-output response of nonlinear mechanical systems. Specifically, a model-based reference tracking architecture is developed for nonlinear feedback systems with output nonlinearities. The overall methodology shows a high degree of performance combined with significant robustness against imperfect modelling and extrapolation. These findings are demonstrated using large set of synthetic experiments conducted on a asymmetric Duffing oscillator and using an experimental prototype of a high-precision motion system.

eess.SY↗