arXiv subjects

Kevin Buchin

Publications and source records attributed to Kevin Buchin.

At least 37 records · Page 2Linked to original sources

arXiv2022

On Cyclic Solutions to the Min-Max Latency Multi-Robot Patrolling Problem

We consider the following surveillance problem: Given a set $P$ of $n$ sites in a metric space and a set of $k$ robots with the same maximum speed, compute a patrol schedule of minimum latency for the robots. Here a patrol schedule specifies for each robot an infinite sequence of sites to visit (in the given order) and the latency $L$ of a schedule is the maximum latency of any site, where the latency of a site $s$ is the supremum of the lengths of the time intervals between consecutive visits to $s$. When $k=1$ the problem is equivalent to the travelling salesman problem (TSP) and thus it is NP-hard. We have two main results. We consider cyclic solutions in which the set of sites must be partitioned into $\ell$ groups, for some~$\ell \leq k$, and each group is assigned a subset of the robots that move along the travelling salesman tour of the group at equal distance from each other. Our first main result is that approximating the optimal latency of the class of cyclic solutions can be reduced to approximating the optimal travelling salesman tour on some input, with only a $1+\varepsilon$ factor loss in the approximation factor and an $O\left(\left( k/\varepsilon \right)^k\right)$ factor loss in the runtime, for any $\varepsilon >0$. Our second main result shows that an optimal cyclic solution is a $2(1-1/k)$-approximation of the overall optimal solution. Note that for $k=2$ this implies that an optimal cyclic solution is optimal overall. The results have a number of consequences. For the Euclidean version of the problem, for instance, combining our results with known results on Euclidean TSP, yields a PTAS for approximating an optimal cyclic solution, and it yields a $(2(1-1/k)+\varepsilon)$-approximation of the optimal unrestricted solution. If the conjecture mentioned above is true, then our algorithm is actually a PTAS for the general problem in the Euclidean setting.

cs.CG↗

arXiv2022

On the Computational Power of Energy-Constrained Mobile Robots: Algorithms and Cross-Model Analysis

We consider distributed systems of identical autonomous computational entities, called robots, moving and operating in the plane in synchronous Look-Compute-Move (LCM) cycles. The algorithmic capabilities of these systems have been extensively investigated in the literature under four distinct models (OBLOT, FSTA, FCOM, LUMI), each identifying different levels of memory persistence and communication capabilities of the robots. Despite their differences, they all always assume that robots have unlimited amounts of energy. In this paper, we remove this assumption and start the study of the computational capabilities of robots whose energy is limited, albeit renewable. We first study the impact that memory persistence and communication capabilities have on the computational power of such energy-constrained systems of robots; we do so by analyzing the computational relationship between the four models under this energy constraint. We provide a complete characterization of this relationship. We then study the difference in computational power caused by the energy restriction and provide a complete characterization of the relationship between energy-constrained and unrestricted robots in each model. We prove that within LUMI there is no difference; an integral part of the proof is the design and analysis of an algorithm that in LUMI allows energy-constrained robots to execute correctly any protocol for robots with unlimited energy. We then show the (apparently counterintuitive) result that in all other models, the energy constraint actually provides the robots with a computational advantage.

cs.DC↗

arXiv2022

Computing Continuous Dynamic Time Warping of Time Series in Polynomial Time

Dynamic Time Warping is arguably the most popular similarity measure for time series, where we define a time series to be a one-dimensional polygonal curve. The drawback of Dynamic Time Warping is that it is sensitive to the sampling rate of the time series. The Fr\'echet distance is an alternative that has gained popularity, however, its drawback is that it is sensitive to outliers. Continuous Dynamic Time Warping (CDTW) is a recently proposed alternative that does not exhibit the aforementioned drawbacks. CDTW combines the continuous nature of the Fr\'echet distance with the summation of Dynamic Time Warping, resulting in a similarity measure that is robust to sampling rate and to outliers. In a recent experimental work of Brankovic et al., it was demonstrated that clustering under CDTW avoids the unwanted artifacts that appear when clustering under Dynamic Time Warping and under the Fr\'echet distance. Despite its advantages, the major shortcoming of CDTW is that there is no exact algorithm for computing CDTW, in polynomial time or otherwise. In this work, we present the first exact algorithm for computing CDTW of one-dimensional curves. Our algorithm runs in time $O(n^5)$ for a pair of one-dimensional curves, each with complexity at most $n$. In our algorithm, we propagate continuous functions in the dynamic program for CDTW, where the main difficulty lies in bounding the complexity of the functions. We believe that our result is an important first step towards CDTW becoming a practical similarity measure between curves.

cs.CG↗

arXiv2022

Segment Visibility Counting Queries in Polygons

Let $P$ be a simple polygon with $n$ vertices, and let $A$ be a set of $m$ points or line segments inside $P$. We develop data structures that can efficiently count the number of objects from $A$ that are visible to a query point or a query segment. Our main aim is to obtain fast, $O(\mathop{\textrm{polylog}} nm$), query times, while using as little space as possible. In case the query is a single point, a simple visibility-polygon-based solution achieves $O(\log nm)$ query time using $O(nm^2)$ space. In case $A$ also contains only points, we present a smaller, $O(n + m^{2 + \varepsilon}\log n)$-space, data structure based on a hierarchical decomposition of the polygon. Building on these results, we tackle the case where the query is a line segment and $A$ contains only points. The main complication here is that the segment may intersect multiple regions of the polygon decomposition, and that a point may see multiple such pieces. Despite these issues, we show how to achieve $O(\log n\log nm)$ query time using only $O(nm^{2 + \varepsilon} + n^2)$ space. Finally, we show that we can even handle the case where the objects in $A$ are segments with the same bounds.

cs.CG↗

arXiv2021

Near-Delaunay Metrics

We study metrics that assess how close a triangulation is to being a Delaunay triangulation, for use in contexts where a good triangulation is desired but constraints (e.g., maximum degree) prevent the use of the Delaunay triangulation itself. Our near-Delaunay metrics derive from common Delaunay properties and satisfy a basic set of design criteria, such as being invariant under similarity transformations. We compare the metrics, showing that each can make different judgments as to which triangulation is closer to Delaunay. We also present a preliminary experiment, showing how optimizing for these metrics under different constraints gives similar, but not necessarily identical results, on random and constructed small point sets.

cs.CG↗

arXiv2021

Computing the Fr\'echet Distance Between Uncertain Curves in One Dimension

We consider the problem of computing the Fr\'echet distance between two curves for which the exact locations of the vertices are unknown. Each vertex may be placed in a given uncertainty region for that vertex, and the objective is to place vertices so as to minimise the Fr\'echet distance. This problem was recently shown to be NP-hard in 2D, and it is unclear how to compute an optimal vertex placement at all. We present the first general algorithmic framework for this problem. We prove that it results in a polynomial-time algorithm for curves in 1D with intervals as uncertainty regions. In contrast, we show that the problem is NP-hard in 1D in the case that vertices are placed to maximise the Fr\'echet distance. We also study the weak Fr\'echet distance between uncertain curves. While finding the optimal placement of vertices seems more difficult than the regular Fr\'echet distance -- and indeed we can easily prove that the problem is NP-hard in 2D -- the optimal placement of vertices in 1D can be computed in polynomial time. Finally, we investigate the discrete weak Fr\'echet distance, for which, somewhat surprisingly, the problem is NP-hard already in 1D.

cs.CG↗

arXiv2021

Dots & Boxes is PSPACE-complete

Exactly 20 years ago at MFCS, Demaine posed the open problem whether the game of Dots & Boxes is PSPACE-complete. Dots & Boxes has been studied extensively, with for instance a chapter in Berlekamp et al. "Winning Ways for Your Mathematical Plays", a whole book on the game "The Dots and Boxes Game: Sophisticated Child's Play" by Berlekamp, and numerous articles in the "Games of No Chance" series. While known to be NP-hard, the question of its complexity remained open. We resolve this question, proving that the game is PSPACE-complete by a reduction from a game played on propositional formulas.

cs.CG↗

arXiv2021

Minimum Scan Cover and Variants -- Theory and Experiments

We consider a spectrum of geometric optimization problems motivated by contexts such as satellite communication and astrophysics. In the problem Minimum Scan Cover with Angular Costs, we are given a graph $G$ that is embedded in Euclidean space. The edges of $G$ need to be scanned, i.e., probed from both of their vertices. In order to scan their edge, two vertices need to face each other; changing the heading of a vertex incurs some cost in terms of energy or rotation time that is proportional to the corresponding rotation angle. Our goal is to compute schedules that minimize the following objective functions: (i) in Minimum Makespan Scan Cover (MSC-MS), this is the time until all edges are scanned; (ii) in Minimum Total Energy Scan Cover (MSC-TE), the sum of all rotation angles; (iii) in Minimum Bottleneck Energy Scan Cover (MSC-BE), the maximum total rotation angle at one vertex. Previous theoretical work on MSC-MS revealed a close connection to graph coloring and the cut cover problem, leading to hardness and approximability results. In this paper, we present polynomial-time algorithms for 1D instances of MSC-TE and MSC-BE, but NP-hardness proofs for bipartite 2D instances. For bipartite graphs in 2D, we also give 2-approximation algorithms for both MSC-TE and MSC-BE. Most importantly, we provide a comprehensive study of practical methods for all three problems. We compare three different mixed-integer programming and two constraint programming approaches, and show how to compute provably optimal solutions for geometric instances with up to 300 edges. Additionally, we compare the performance of different meta-heuristics for even larger instances.

cs.CG↗

arXiv2021

Uncertain Curve Simplification

We study the problem of polygonal curve simplification under uncertainty, where instead of a sequence of exact points, each uncertain point is represented by a region, which contains the (unknown) true location of the vertex. The regions we consider are disks, line segments, convex polygons, and discrete sets of points. We are interested in finding the shortest subsequence of uncertain points such that no matter what the true location of each uncertain point is, the resulting polygonal curve is a valid simplification of the original polygonal curve under the Hausdorff or the Fr\'echet distance. For both these distance measures, we present polynomial-time algorithms for this problem.

cs.CG↗

arXiv2020

(k, l)-Medians Clustering of Trajectories Using Continuous Dynamic Time Warping

Due to the massively increasing amount of available geospatial data and the need to present it in an understandable way, clustering this data is more important than ever. As clusters might contain a large number of objects, having a representative for each cluster significantly facilitates understanding a clustering. Clustering methods relying on such representatives are called center-based. In this work we consider the problem of center-based clustering of trajectories. In this setting, the representative of a cluster is again a trajectory. To obtain a compact representation of the clusters and to avoid overfitting, we restrict the complexity of the representative trajectories by a parameter l. This restriction, however, makes discrete distance measures like dynamic time warping (DTW) less suited. There is recent work on center-based clustering of trajectories with a continuous distance measure, namely, the Fr\'echet distance. While the Fr\'echet distance allows for restriction of the center complexity, it can also be sensitive to outliers, whereas averaging-type distance measures, like DTW, are less so. To obtain a trajectory clustering algorithm that allows restricting center complexity and is more robust to outliers, we propose the usage of a continuous version of DTW as distance measure, which we call continuous dynamic time warping (CDTW). Our contribution is twofold: 1. To combat the lack of practical algorithms for CDTW, we develop an approximation algorithm that computes it. 2. We develop the first clustering algorithm under this distance measure and show a practical way to compute a center from a set of trajectories and subsequently iteratively improve it. To obtain insights into the results of clustering under CDTW on practical data, we conduct extensive experiments.

cs.LG↗

arXiv2020

Approximation Algorithms for Multi-Robot Patrol-Scheduling with Min-Max Latency

We consider the problem of finding patrol schedules for $k$ robots to visit a given set of $n$ sites in a metric space. Each robot has the same maximum speed and the goal is to minimize the weighted maximum latency of any site, where the latency of a site is defined as the maximum time duration between consecutive visits of that site. The problem is NP-hard, as it has the traveling salesman problem as a special case (when $k=1$ and all sites have the same weight). We present a polynomial-time algorithm with an approximation factor of $O(k^2 \log \frac{w_{\max}}{w_{\min}})$ to the optimal solution, where $w_{\max}$ and $w_{\min}$ are the maximum and minimum weight of the sites respectively. Further, we consider the special case where the sites are in 1D. When all sites have the same weight, we present a polynomial-time algorithm to solve the problem exactly. If the sites may have different weights, we present a $12$-approximate solution, which runs in polynomial time when the number of robots, $k$, is a constant.

cs.DS↗

arXiv2020

Fr\'echet Distance for Uncertain Curves

In this paper we study a wide range of variants for computing the (discrete and continuous) Fr\'echet distance between uncertain curves. We define an uncertain curve as a sequence of uncertainty regions, where each region is a disk, a line segment, or a set of points. A realisation of a curve is a polyline connecting one point from each region. Given an uncertain curve and a second (certain or uncertain) curve, we seek to compute the lower and upper bound Fr\'echet distance, which are the minimum and maximum Fr\'echet distance for any realisations of the curves. We prove that both the upper and lower bound problems are NP-hard for the continuous Fr\'echet distance in several uncertainty models, and that the upper bound problem remains hard for the discrete Fr\'echet distance. In contrast, the lower bound (discrete and continuous) Fr\'echet distance can be computed in polynomial time. Furthermore, we show that computing the expected discrete Fr\'echet distance is #P-hard when the uncertainty regions are modelled as point sets or line segments. The construction also extends to show #P-hardness for computing the continuous Fr\'echet distance when regions are modelled as point sets. On the positive side, we argue that in any constant dimension there is a FPTAS for the lower bound problem when $\Delta / \delta$ is polynomially bounded, where $\delta$ is the Fr\'echet distance and $\Delta$ bounds the diameter of the regions. We then argue there is a near-linear-time 3-approximation for the decision problem when the regions are convex and roughly $\delta$-separated. Finally, we also study the setting with Sakoe--Chiba time bands, where we restrict the alignment between the two curves, and give polynomial-time algorithms for upper bound and expected discrete and continuous Fr\'echet distance for uncertainty regions modelled as point sets.

cs.CG↗

arXiv2020

Dots & Polygons

We present a new game, Dots & Polygons, played on a planar point set. Players take turns connecting two points, and when a player closes a (simple) polygon, the player scores its area. We show that deciding whether the game can be won from a given state, is NP-hard. We do so by a reduction from vertex-disjoint cycle packing in cubic planar graphs, including a self-contained reduction from planar 3-Satisfiability to this cycle-packing problem. This also provides a simple proof of the NP-hardness of the related game Dots & Boxes. For points in convex position, we discuss a greedy strategy for Dots & Polygons.

cs.CG↗

arXiv2019

Sometimes Reliable Spanners of Almost Linear Size

Reliable spanners can withstand huge failures, even when a linear number of vertices are deleted from the network. In case of failures, a reliable spanner may have some additional vertices for which the spanner property no longer holds, but this collateral damage is bounded by a fraction of the size of the attack. It is known that $\Omega(n\log n)$ edges are needed to achieve this strong property, where $n$ is the number of vertices in the network, even in one dimension. Constructions of reliable geometric $(1+\varepsilon)$-spanners, for $n$ points in $\Re^d$, are known, where the resulting graph has $O( n \log n \log \log^{6}n )$ edges. Here, we show randomized constructions of smaller size spanners that have the desired reliability property in expectation or with good probability. The new construction is simple, and potentially practical -- replacing a hierarchical usage of expanders (which renders the previous constructions impractical) by a simple skip-list like construction. This results in a $1$-spanner, on the line, that has linear number of edges. Using this, we present a construction of a reliable spanner in $\Re^d$ with $O( n \log \log^{2} n \log \log \log n )$ edges.

cs.CG↗

arXiv2019

The Number of Convex Polyominoes with Given Height and Width

We give a new combinatorial proof for the number of convex polyominoes whose minimum enclosing rectangle has given dimensions. We also count the subclass of these polyominoes that contain the lower left corner of the enclosing rectangle (directed polyominoes). We indicate how to sample random polyominoes in these classes. As a side result, we calculate the first and second moments of the number of common points of two monotone lattice paths between two given points.

math.CO↗

arXiv2019

On the hardness of computing an average curve

We study the complexity of clustering curves under $k$-median and $k$-center objectives in the metric space of the Fr\'echet distance and related distance measures. Building upon recent hardness results for the minimum-enclosing-ball problem under the Fr\'echet distance, we show that also the $1$-median problem is NP-hard. Furthermore, we show that the $1$-median problem is W[1]-hard with the number of curves as parameter. We show this under the discrete and continuous Fr\'echet and Dynamic Time Warping (DTW) distance. This yields an independent proof of an earlier result by Bulteau et al. from 2018 for a variant of DTW that uses squared distances, where the new proof is both simpler and more general. On the positive side, we give approximation algorithms for problem variants where the center curve may have complexity at most $\ell$ under the discrete Fr\'echet distance. In particular, for fixed $k,\ell$ and $\varepsilon$, we give $(1+\varepsilon)$-approximation algorithms for the $(k,\ell)$-median and $(k,\ell)$-center objectives and a polynomial-time exact algorithm for the $(k,\ell)$-center objective.

cs.CG↗

arXiv2019

Geometric secluded paths and planar satisfiability

We consider paths with low \emph{exposure} to a 2D polygonal domain, i.e., paths which are seen as little as possible; we differentiate between \emph{integral} exposure (when we care about how long the path sees every point of the domain) and \emph{0/1} exposure (just counting whether a point is seen by the path or not). For the integral exposure, we give a PTAS for finding the minimum-exposure path between two given points in the domain; for the 0/1 version, we prove that in a simple polygon the shortest path has the minimum exposure, while in domains with holes the problem becomes NP-hard. We also highlight connections of the problem to minimum satisfiability and settle hardness of variants of planar min- and max-SAT.

cs.CG↗

arXiv2018

A Spanner for the Day After

We show how to construct $(1+\varepsilon)$-spanner over a set $P$ of $n$ points in $\mathbb{R}^d$ that is resilient to a catastrophic failure of nodes. Specifically, for prescribed parameters $\vartheta,\varepsilon \in (0,1)$, the computed spanner $G$ has $ O\bigl(\varepsilon^{-c} \vartheta^{-6} n \log n (\log\log n)^6 \bigr) $ edges, where $c= O(d)$. Furthermore, for any $k$, and any deleted set $B \subseteq P$ of $k$ points, the residual graph $G \setminus B$ is $(1+\varepsilon)$-spanner for all the points of $P$ except for $(1+\vartheta)k$ of them. No previous constructions, beyond the trivial clique with $O(n^2)$ edges, were known such that only a tiny additional fraction (i.e., $\vartheta$) lose their distance preserving connectivity. Our construction works by first solving the exact problem in one dimension, and then showing a surprisingly simple and elegant construction in higher dimensions, that uses the one-dimensional construction in a black box fashion.

cs.CG↗