arXiv subjects

Kenneth Breuer

Publications and source records attributed to Kenneth Breuer.

At least 19 recordsLinked to original sources

arXiv2026

The Structure of Merging Turbulent Jets Beneath a Small Quadrotor

The downwash wake of a hovering quadrotor governs both the vehicle's own performance and the safe spacing of multi-rotor formations. Prior measurements have largely characterized the mean flow, using single-point anemometry, volumetric tracking, or planar cuts through part of the rotor system. Higher-order turbulent statistics of the merged wake, and how they relate to canonical jet scaling, have remained unresolved, particularly for small quadrotors at the low-Reynolds-number end of the size range. Here, we present a detailed particle image velocimetry (PIV) study of the downwash of a hovering Crazyflie 2.1 quadrotor (arm length, $l = 46$ mm), sampled along a diagonal cut, passing through rotors along the symmetry axis of the quadrotor, and a front-rotor cut, passing through adjacent rotors. The four rotor jets merge into a single column by $z/l \approx 5$, beyond which the mean velocity profiles progressively approach the canonical round-jet self-similar form, collapsing by $z/l \approx 13$ when scaled by the local centerline velocity and half-width. Centerline decay and half-width growth follow canonical scaling laws with an effective source diameter $D_\text{eff} = 2.29\,l$, effective Reynolds number $Re_{D_\text{eff}} = 3 \times 10^4$, at the low end of the range over which canonical jet scaling has been established, and spreading and decay constants nonetheless within the canonical round-jet range. Resolving both cuts shows that the turbulent normal stresses retain a bimodal, cut-dependent signature of the four-rotor source throughout the measurement domain.

physics.flu-dyn↗

arXiv2026

Hydrodynamic loads and vortex evolution from a bio-inspired pectoral fin near a solid body

A fin-body configuration is tested in a water tunnel to study the hydrodynamic loads and vortex evolution under dynamic fin-flapping motions, which is an idealized approximation of the pectoral fins of fish. The fin flaps about its leading edge, which is attached to the side of the body, at a range of combinations of amplitudes ($0^\circ-30^\circ$) and frequencies ($0.25\,\mathrm{Hz}-2\,\mathrm{Hz}$ or $k=0.16-1.26$), so the Strouhal number ($St=0.013-0.419$). The quasi-steady hydrodynamic loads exhibit significant hysteresis during the upstroke and downstroke phases of the fin flapping. Particle image velocimetry (PIV) measurements show the details of the shear layer and vortex development in dynamic flapping cases. Orbiting behaviors of the fin tip vortices are observed in larger Strouhal number cases. PIV results also reveal the influence of vortices on hydrodynamic loads in terms of lift fluctuations and thrust generation. The strong dependency on the reduced frequency and Strouhal number leads to scalings of the hydrodynamic loads using a data-driven method to select highly correlated terms. The most significant terms selected by the scaling process are quadratic terms of the Strouhal number and its nonlinear combinations with the reduced frequency.

physics.flu-dyn↗

arXiv2026

Maneuvering of an underwater vehicle using bio-inspired pectoral fins

A Cyber-physical underwater vehicle is equipped with bio-inspired flapping fins positioned on the sides of the vehicle's main body. The proposed control surfaces are inspired by fish pectoral fins, generating forces and moments that can potentially be harnessed for maneuvering, hovering and station keeping. The streamwise and cross-stream forces produced by the fins are characterized for a range of reduced frequencies and Strouhal numbers. The streamwise forces are shown to be predominantly a function of the fin's projected frontal area, while the lateral forces also depend on the Strouhal number. When operated simultaneously, different flapping synchronizations can be employed for specific goals; a symmetric motion suppresses the lateral forces, while an anti-symmetric motion decreases the peaks of the streamwise force produced. The Cyber-physical vehicle demonstrates how the pair of fins can successfully maneuver the vehicle in the lateral direction.

physics.flu-dyn↗

arXiv2026

Vibrissa inspired geometries enhance sensitivity of wake-induced vibrations

We report on experiments designed to characterize the vortex-induced vibration (VIV) and wake-induced vibration (WIV) experienced by bluff bodies immersed in both steady and unsteady flows. Using a real-time Cyber-Physical System (CPS) we systematically prescribe the virtual mass, spring constant, and damping of elastically mounted models. This allows us to characterize the forces and displacements of the free vibration of a circular cylinder, elliptical cylinder, and a seal whisker inspired vibrissa model with undulating elliptical geometry. In a free flow, the circular cylinder exhibits high VIV, while the reduced aspect ratio objects have minimal vibration across all structural frequencies. When a flow disturbance of a pitching and heaving hydrofoil is introduced, the reduced aspect ratio objects are excited by WIV with highest amplitude oscillations occurring when structural frequency of the test object matches wake frequency of the upstream foil. To further understand the benefits of an undulated geometry over a classic elliptical cylinder, we assess the nonlinear fluid damping experienced by each test object by comparing experimental data to quadratic drag and Van der Pol damping models. Our results show that the amplitude dependent Van der Pol damping model better describes the physical system for both test objects by capturing the suppression of large amplitude WIV, but recovering small amplitude VIV. However, the strength of the fitted Van der Pol damping coefficient is greater for the elliptical cylinder than the vibrissa. We find the vibrissa experiences lower damping than the elliptical cylinder across all tested structural frequencies, indicating how the vibrissa geometry may serve as a higher sensitivity sensor.

physics.flu-dyn↗

arXiv2025

Vortices, turbulence, and center of pressure in flow over pitching swept wings

This study examines the center of pressure (CoP) movement of rigid pitching swept wings based on prior measurements by (Zhu, Breuer, 2023}. The wings analyzed feature sweep angles of $0^{\circ}$, $10^{\circ}$, and $20^{\circ}$, and are subjected to large amplitude sinusoidal pitching instabilities below a critical torsional spring stiffness. The CoP location is determined from time-resolved force and moment measurements, revealing minimal variation in the cross-chord direction but significant spanwise and chord-wise movement, varied by sweep angle. The trajectory of the CoP varies with sweep angle due to the evolving strength and dynamics of the leading edge and tip vortices. The Force Moment Partitioning Method (FMPM) is applied to stereo Particle Image Velocimetry (PIV) data to identify contributions from wing kinematics, vortex structures, and viscous effects. This approach elucidates the roles of leading edge and tip vortices, as well as the periodic and stochastic components of the flow field, in influencing the net forces and moments.

physics.flu-dyn↗

arXiv2025

Aerodynamic Forces on a Wing Surfing in a Two-dimensional Vortex Wake

Inspired by the wake-surfing nature of animals, this study aims to understand the aerodynamic force variation on a wing surfing in an unsteady 2-D wake. Wind tunnel experiments were conducted using Particle Image Velocimetry (PIV) and force measurements with a fixed wing immersed in the wake of a pitching airfoil. The comparison between force and PIV measurements shows that the lift response of the surfing wing is aligned with the impingement of flow structures, and that the dependence of the cycle-averaged lift fluctuations on the upstream flapping kinematics can be scaled as a function of the reduced amplitude and reduced frequency of the flapping motion. Good collapse of the data is found, and deviations from scaling are explained in terms of the wake characteristics. The phase-resolved lift fluctuations on the vortical wake encountering can be effectively predicted using classic unsteady aerodynamics based on measured unsteady local flow conditions (instantaneous angle of attack and speed). The theoretical predictions compare well with direct force sensor measurements.

physics.flu-dyn↗

arXiv2025

Influence of Static and Dynamic Downwash Interactions on Multi-Quadrotor Systems

Flying multiple quadrotors in close proximity presents a significant challenge due to complex aerodynamic interactions, particularly downwash effects that are known to destabilize vehicles and degrade performance. Traditionally, multi-quadrotor systems rely on conservative strategies, such as collision avoidance zones around the robot volume, to circumvent this effect. This restricts their capabilities by requiring a large volume for the operation of a multi-quadrotor system, limiting their applicability in dense environments. This work provides a comprehensive, data-driven analysis of the downwash effect, with a focus on characterizing, analyzing, and understanding forces, moments, and velocities in both single and multi-quadrotor configurations. We use measurements of forces and torques to characterize vehicle interactions, and particle image velocimetry (PIV) to quantify the spatial features of the downwash wake for a single quadrotor and an interacting pair of quadrotors. This data can be used to inform physics-based strategies for coordination, leverage downwash for optimized formations, expand the envelope of operation, and improve the robustness of multi-quadrotor control.

cs.RO↗

arXiv2025

The Three-Dimensional Velocity Field of Kinesin-Driven Microtubules in Torroidal Channels

We study two regimes of flow in multiple three-dimensional toroidal channels by tracking the fluorescent spherical particles in the kinesin-driven microtubule systems: ``chaotic'' flow and ``coherent'' flow. In the smallest aspect ratio torus, where the channel height $h$ is a quarter of the width $w$, the active system shows zero mean velocity, small-scale isotropy in fluctuation and no persistent flow structure. In other tori with higher aspect ratios $h/w$ close to 1, we find faster coherent flows along the azimuthal direction and increasing fluctuation strengths with growing confinement geometries. Regardless of flow regimes, the flow profiles at $r-z$ cross-section and $r-\theta$ plane are symmetric. The ``coherent'' profiles show two criteria: ``Poiseuille-like'' profiles, which have the peak velocities near the centers of channels; a ``peak-separated'' profile, which has four peak velocities near a certain distance to four confining surfaces. These flow profiles, after scaled by the local isotropic fluctuation strength, reveal universal three-dimensional flow structures among the ``Poiseuille-like'' criterion and the same level of scaled peak velocity at the ``peak-separated'' one. These results illustrate scalable flow structures in this kinesin-driven microtubule active system.

physics.flu-dyn↗

arXiv2024

Upstroke wing clapping in bats and bat-inspired robots improves both lift generation and power economy

Wing articulation is critical for efficient flight of bird- and bat-sized animals. Inspired by the flight of $\textit{Cynopterus brachyotis}$, the lesser short-nosed fruit bat, we built a two-degree-of-freedom flapping wing platform with variable wing folding capability. In late upstroke, the wings "clap" and produce an air jet that significantly increases lift production, with a positive peak matched to that produced in downstroke. Though ventral clapping has been observed in avian flight, potential aerodynamic benefit of this behavior has yet to be rigorously assessed. We used multiple approaches -- quasi-steady modeling, direct force/power measurement, and PIV experiments in a wind tunnel -- to understand critical aspects of lift/power variation in relation to wing folding magnitude over Strouhal numbers between $St = 0.2 - 0.4$. While lift increases monotonically with folding amplitude in that range, power economy (ratio of lift/power) is more nuanced. At $St = 0.2 - 0.3$, it increase with wing folding amplitude monotonically. At $St = 0.3 - 0.4$, it features two maxima -- one at medium folding amplitude ($\sim 30^\circ$), and the other at maximum folding. These findings illuminate two strategies available to flapping wing animals and robots -- symmetry-breaking lift augmentation and appendage-based jet propulsion.

physics.flu-dyn↗

arXiv2024

Wing twist and folding work in synergy to propel flapping wing animals and robots

We designed and built a three degrees-of-freedom (DOF) flapping wing robot, Flapperoo, to study the aerodynamic benefits of wing folding and twisting. Forces and moments of this physical model are measured in wind tunnel tests over a Strouhal number range of St = 0.2 - 0.4, typical for animal flight. We perform particle image velocimetry (PIV) measurements to visualize the air jet produced by wing clapping under the ventral side of the body when wing folding is at the extreme. The results show that this jet can be directed by controlling the wing twist at the moment of clapping, which leads to greatly enhanced cycle-averaged thrust, especially at high St or low flight speeds. Additional benefits of more thrust and less negative lift are gained during upstroke using wing twist. Remarkably, less total actuating force, or less total power, is required during upstroke with wing twist. These findings emphasize the benefits of critical wing articulation for the future flapping wing/fin robots and for an accurate test platform to study natural flapping wing flight or underwater vehicles.

physics.flu-dyn↗

arXiv2024

Shape-morphing membranes augment the performance of oscillating foil energy harvesting turbines

Oscillating foil turbines (OFTs) can be used to produce power from rivers and tides by synchronizing their heaving motion with the strong lift force of vortices shed at their leading edge. Prior work has shown that compliant membrane OFTs, which passively camber, exhibit enhanced leading edge vortex (LEV) stability and improved lift and power compared with rigid foil OFTs for specific kinematics. This work seeks to understand a) the performance of compliant membrane OFTs over their full kinematic parameter space and b) separate the roles of membrane camber and extensibility in LEV stabilization. We characterize the performance of a compliant membrane OFT over a wide range of kinematic parameters through prescribed motion experiments in a free-surface water flume. The optimal frequency of the compliant membrane OFT is found to be lower than that of a rigid foil OFT due to the enhanced LEV stability of the membrane. The lift and power of compliant and inextensible membrane foils are then compared to determine whether camber alone is effective for LEV stabilization or if extensibility plays an important stabilizing role. The deformation of the compliant membrane OFT is measured using laser imaging. We observe that the role of extensibility changes for different angles of attack. At low angles of attack, membrane deformation is consistent through the half cycle coinciding with similar performance to the inextensible foil. At higher angles of attack, the compliant foil has a larger deformation and dynamically decambers corresponding with delayed stall and enhanced lift and power.

physics.flu-dyn↗

arXiv2023

A data-driven approach for modeling large-amplitude flow-induced oscillations of elastically mounted pitching wings

We propose and validate a data-driven approach for modeling large-amplitude flow-induced oscillations of elastically mounted pitching wings. We first train a neural networks regression model for the nonlinear aerodynamic moment using data obtained from experimental measurements during prescribed pitching oscillations and at fixed angles of attack. We then embed this model into an ordinary differential equation solver to solve the governing equation of the passive aeroelastic system with desired structural parameters. The system dynamics predicted by the proposed data-driven approach are characterized and compared with those obtained from physical experiments. The predicted and experimental pitching amplitude, frequency and aerodynamic moment responses are found to be in excellent agreement. Both the inertia-dominated mode and the hydrodynamic-dominated mode are successfully predicted. The transient growth and saturation of the pitching oscillation amplitude and the aerodynamic moment are also faithfully captured by the proposed approach. Additional test cases demonstrate the broad applicability and good scalability potential of this approach.

physics.flu-dyn↗

arXiv2023

Flow-induced oscillations of pitching swept wings: Stability boundary, vortex dynamics and force partitioning

We experimentally study the aeroelastic instability boundaries and three-dimensional vortex dynamics of pitching swept wings, with the sweep angle ranging from 0 to 25 degrees. The structural dynamics of the wings are simulated using a cyber-physical control system. With a constant flow speed, a prescribed high inertia and a small structural damping, we show that the system undergoes a subcritical Hopf bifurcation to large-amplitude limit-cycle oscillations (LCOs) for all the sweep angles. The onset of LCOs depends largely on the static characteristics of the wing. The saddle-node point is found to change non-monotonically with the sweep angle, which we attribute to the non-monotonic power transfer between the ambient fluid and the elastic mount. An optimal sweep angle is observed to enhance the power extraction performance and thus promote LCOs and destabilize the aeroelastic system. The frequency response of the system reveals a structural-hydrodynamic oscillation mode for wings with relatively high sweep angles. Force, moment, and three-dimensional flow structures measured using multi-layer stereoscopic particle image velocimetry are analyzed to explain the differences in power extraction for different swept wings. Finally, we employ a physics-based Force and Moment Partitioning Method (FMPM) to quantitatively correlate the three-dimensional vortex dynamics with the resultant unsteady aerodynamic moment.

physics.flu-dyn↗

arXiv2023

An improved aerodynamic model for quasi-steady simulations of animal flight at moderate Reynolds numbers

We report on experimental and numerical studies aimed at developing an improved paradigm to model animal flight at moderate Reynolds numbers ($ 20 k - 50k $). A series of experiments were performed to characterize the behaviors of aerodynamic forces and moment associated with a quasi-steady rectangular wing over a range of angle of attack, $\alpha$. We demonstrate that, while the drag coefficient curve, $C_D(\alpha)$, can be accurately modeled solely by a simple trigonometric function, the evolution of lift coefficient curve, $C_L(\alpha)$, is governed by the sum of trigonometric and exponential functions, where the latter captures the linear variation in lift coefficient within the small-angle regime, as predicted by the linear inviscid theory. In addition, we establish an empirical relation between the location of the center of pressure and $\alpha$, which can be used in conjunction with the proposed aerodynamic formulas (i.e., $C_L$ and $C_D$) to evaluate the pitching moment coefficient, $C_M(\alpha)$, about any arbitrary axis. These quasi-steady formulations are then utilized within a previously tested flapping-wing code to simulate the forward flight of a pigeon and a bat at various flight speeds, and the results are compared against previously reported experimental data. We successfully demonstrate that the proposed formulas yield much better agreement with wingbeat frequency for both animals, especially at higher flight speeds. In addition, the small-angle regime proves critical in offering higher $C_L/C_D$, leading to solutions with lower power consumption and body pitching variation, both of which are important aspects in designing future flapping wing robots.

physics.flu-dyn↗

arXiv2023

Force moment partitioning and scaling analysis of vortices shed by a 2D pitching wing in quiescent fluid

We experimentally study the dynamics and strength of vortices shed from a NACA 0012 wing undergoing sinusoidal pitching in quiescent water. We characterize the temporal evolution of the vortex trajectory and circulation over a range of pitching frequencies, amplitudes and pivot locations. By employing a physics-based force and moment partitioning method (FMPM), we estimate the vortex-induced aerodynamic moment from the velocity fields measured using particle image velocimetry. The vortex circulation, formation time and vorticity-induced moment are shown to follow scaling laws based on the feeding shear-layer velocity. The vortex dynamics, together with the spatial distribution of the vorticity-induced moment, provide quantitative explanations for the nonlinear behaviors observed in the fluid damping (Zhu et al., J. Fluid Mech., vol. 923, 2021, R2). The FMPM-estimated moment and damping are shown to match well in trend with direct force measurements, despite a discrepancy in magnitude. Our results demonstrate the powerful capability of the FMPM in dissecting experimental flow field data and providing valuable insights into the underlying flow physics.

physics.flu-dyn↗

arXiv2022

Leading edge vortex formation and wake trajectory: Synthesizing measurements, analysis, and machine learning

The strength and trajectory of a leading edge vortex (LEV) formed by a pitching-heaving hydrofoil (chord $c$) is studied. The LEV is identified using the $Q$-criterion method, which is calculated from the 2D velocity field obtained from PIV measurements. The relative angle of attack at mid-stroke, ${\alpha_{T/4}} $, proves to be an effective method of combining heave amplitude ($h_0/c$), pitch amplitude ($\theta_0$), and reduced frequency ($f^*$) into a single variable that predicts the maximum value of $Q$ over a wide range of operating conditions. Once the LEV separates from the foil, it travels downstream and rapidly weakens and diffuses. The downstream trajectory of the LEV has two characteristic shapes. At low values of ${\alpha_{T/4}}$, it travels straight downstream after separating from the foil, while at higher values of ${\alpha_{T/4}} $, an accompanying Trailing Edge Vortex (TEV) forms and the induced velocity generates a cross-stream component to the vortex trajectories. This behavior is accurately predicted using a potential flow model for the LEV and TEV. Supervised machine learning algorithms, namely Support Vector Regression and Gaussian Process Regression, are used to create regression models that predicts the vortex strength, shape and trajectory during growth and after separation. The regression model successfully captures the features of two vortex regimes observed at different values of ${\alpha_{T/4}} $. However, the predicted LEV trajectories are somewhat smoother than observed in the experiments. The strengths of the vortex is often under-predicted. Both of these shortcomings may be attributed to the relatively small size of the training data set.

physics.flu-dyn↗

arXiv2021

Nonlinear fluid damping of elastically mounted pitching wings in quiescent water

We experimentally study the nonlinear fluid damping of a rigid but elastically mounted pitching wing in the absence of a freestream flow. The dynamics of the elastic mount are simulated using a cyber-physical system. We perturb the wing and measure the fluid damping coefficient from damped oscillations over a large range of pitching frequencies, pitching amplitudes, pivot locations and sweep angles. A universal fluid damping scaling is proposed to incorporate all these parameters. Flow fields obtained using particle image velocimetry are analyzed to explain the nonlinear behaviors of the fluid damping.

physics.flu-dyn↗

arXiv2021

Effects of confinement on the dynamics and correlation scales in active fluids

We study the influence of solid boundaries on dynamics and structure of active fluids as the height of the container, $z$, changes. Along the varying dimension, the geometry systematically increases, therefore, the confinement ($z$) transits from "strong confinement", to "intermediate confinement" and to "weak confinement" (close to "unconfined"). In horizontal dimensions ($x,y$), the system remains "unconfined". Through tracking the tracers dispersed in the active fluids in three dimensions we observed that activity level, characterized by velocity fluctuations of flow tracers, increases as system size increases. Concomitantly, the velocity-velocity temporal correlation changes from weak correlation to strong positive correlation, indicating "memory" in active flows. We estimate the characteristic size of the flow structure by integrating the velocity-velocity spatial correlation function. The integral increases as confinement becomes weaker and saturates at approximately 400 microns as the system becomes "unconfined". This saturation indicates an intrinsic length scale which, along with the small-scale isotropy, demonstrates the multi-scale nature of this kinesin-driven bundled microtubule system.

cond-mat.soft↗