arXiv subjects

Ke Meng

Publications and source records attributed to Ke Meng.

9 recordsLinked to original sources

arXiv2025

Low-Cost Architecture and Efficient Pattern Synthesis for Polarimetric Phased Array Based on Polarization Coding Reconfigurable Elements

Polarimetric phased arrays (PPAs) enhance radar target detection and anti-jamming capabilities, but their conventional dual transmit/receive (T/R) channel architecture leads to high cost and system complexity. To address these limitations, this paper proposes a polarization-coding reconfigurable phased array (PCRPA) and associated pattern synthesis techniques, which reduce the channel count while preserving key performance. In the PCRPA, each antenna element connects to a single T/R channel and is equipped with a two-level RF switch, enabling real-time control of its polarization state and subarray grouping. By optimizing both the element polarization codes and the excitation weights, the array can synthesize arbitrarily polarized and dual-polarized beams. Simulation results show that the proposed approach achieves suppressed cross-polarization and comparable sidelobe levels compared to conventional PPAs across a wide scan range, with performance improvements being more pronounced in larger arrays. The inherent channel reduction does, however, incur a trade-off in terms of radiated power and directivity. Experimental validation using an $8\times 8$ X-band array antenna confirms the feasibility and effectiveness of the proposed system. The PCRPA architecture and the accompanying synthesis methods offer a cost-effective solution for large-scale PPA systems, maintaining sidelobe and polarization control with significantly reduced hardware complexity.

eess.SY↗

arXiv2025

FastDup: a scalable duplicate marking tool using speculation-and-test mechanism

Duplicate marking is a critical preprocessing step in gene sequence analysis to flag redundant reads arising from polymerase chain reaction(PCR) amplification and sequencing artifacts. Although Picard MarkDuplicates is widely recognized as the gold-standard tool, its single-threaded implementation and reliance on global sorting result in significant computational and resource overhead, limiting its efficiency on large-scale datasets. Here, we introduce FastDup: a high-performance, scalable solution that follows the speculation-and-test mechanism. FastDup achieves up to 20x throughput speedup and guarantees 100\% identical output compared to Picard MarkDuplicates. FastDup is a C++ program available from GitHub (https://github.com/zzhofict/FastDup.git) under the MIT license.

q-bio.GN↗

arXiv2024

Navigating Efficiency in MobileViT through Gaussian Process on Global Architecture Factors

Numerous techniques have been meticulously designed to achieve optimal architectures for convolutional neural networks (CNNs), yet a comparable focus on vision transformers (ViTs) has been somewhat lacking. Despite the remarkable success of ViTs in various vision tasks, their heavyweight nature presents challenges of computational costs. In this paper, we leverage the Gaussian process to systematically explore the nonlinear and uncertain relationship between performance and global architecture factors of MobileViT, such as resolution, width, and depth including the depth of in-verted residual blocks and the depth of ViT blocks, and joint factors including resolution-depth and resolution-width. We present design principles twisting magic 4D cube of the global architecture factors that minimize model sizes and computational costs with higher model accuracy. We introduce a formula for downsizing architectures by iteratively deriving smaller MobileViT V2, all while adhering to a specified constraint of multiply-accumulate operations (MACs). Experiment results show that our formula significantly outperforms CNNs and mobile ViTs across diversified datasets

cs.CV↗

arXiv2023

GraphScope Flex: LEGO-like Graph Computing Stack

Graph computing has become increasingly crucial in processing large-scale graph data, with numerous systems developed for this purpose. Two years ago, we introduced GraphScope as a system addressing a wide array of graph computing needs, including graph traversal, analytics, and learning in one system. Since its inception, GraphScope has achieved significant technological advancements and gained widespread adoption across various industries. However, one key lesson from this journey has been understanding the limitations of a "one-size-fits-all" approach, especially when dealing with the diversity of programming interfaces, applications, and data storage formats in graph computing. In response to these challenges, we present GraphScope Flex, the next iteration of GraphScope. GraphScope Flex is designed to be both resource-efficient and cost-effective, while also providing flexibility and user-friendliness through its LEGO-like modularity. This paper explores the architectural innovations and fundamental design principles of GraphScope Flex, all of which are direct outcomes of the lessons learned during our ongoing development process. We validate the adaptability and efficiency of GraphScope Flex with extensive evaluations on synthetic and real-world datasets. The results show that GraphScope Flex achieves 2.4X throughput and up to 55.7X speedup over other systems on the LDBC Social Network and Graphalytics benchmarks, respectively. Furthermore, GraphScope Flex accomplishes up to a 2,400X performance gain in real-world applications, demonstrating its proficiency across a wide range of graph computing scenarios with increased effectiveness.

cs.DC↗

arXiv2023

Layer-dependent superconductivity in iron-based superconductors

The Hohenberg-Mermin-Wagner theorem states that a two-dimensional system cannot spontaneously break a continuous symmetry at finite temperature. This is supported by the observation of layer-dependent superconductivity in the quasi-two-dimensional superconductor NbSe2, in which the superconducting transition temperature (Tc) is reduced by about 60% in the monolayer limit. However, for the extremely anisotropic copper-based high-Tc superconductor Bi2Sr2CaCu2O8+{\delta} (Bi-2212), the Tc of the monolayer is almost identical to that of its bulk counterpart. To clarify the effect of dimensionality on superconductivity, here we successfully fabricate ultrathin flakes of CsCa2Fe4As4F2, a highly anisotropic iron-based high-Tc superconductor, down to monolayer. The monolayer flake exhibits the highest Tc of 24 K (after tuning to the optimal doping by ionic liquid gating), which is about 20% lower than that of the bulk crystal. We also fabricate ultrathin flakes of CaKFe4As4, another iron-based superconductor with much smaller anisotropy. The Tc of the 3-layer flake decreases by 46%, showing a more pronounced dimensional effect than that of CsCa2Fe4As4F2. By carefully examining their anisotropy and the c-axis coherence length, we reveal the general trend and empirical law of the layer-dependent superconductivity in these quasi-two-dimensional superconductors. From this, the Tc of a new monolayer superconductor can be extrapolated.

cond-mat.supr-con↗

arXiv2023

Interpretable Deep Reinforcement Learning for Optimizing Heterogeneous Energy Storage Systems

Energy storage systems (ESS) are pivotal component in the energy market, serving as both energy suppliers and consumers. ESS operators can reap benefits from energy arbitrage by optimizing operations of storage equipment. To further enhance ESS flexibility within the energy market and improve renewable energy utilization, a heterogeneous photovoltaic-ESS (PV-ESS) is proposed, which leverages the unique characteristics of battery energy storage (BES) and hydrogen energy storage (HES). For scheduling tasks of the heterogeneous PV-ESS, cost description plays a crucial role in guiding operator's strategies to maximize benefits. We develop a comprehensive cost function that takes into account degradation, capital, and operation/maintenance costs to reflect real-world scenarios. Moreover, while numerous methods excel in optimizing ESS energy arbitrage, they often rely on black-box models with opaque decision-making processes, limiting practical applicability. To overcome this limitation and enable transparent scheduling strategies, a prototype-based policy network with inherent interpretability is introduced. This network employs human-designed prototypes to guide decision-making by comparing similarities between prototypical situations and encountered situations, which allows for naturally explained scheduling strategies. Comparative results across four distinct cases underscore the effectiveness and practicality of our proposed pre-hoc interpretable optimization method when contrasted with black-box models.

cs.LG↗

arXiv2019

Improving Operational Feasibility of Low-voltage Distribution Network by Phase-switching Devices

High penetration of residential photovoltaic (PV) in low-voltage distribution networks (LVDN) makes the unbalance issue more sever due to the asymmetry of generation/load characteristic in different phases, and may lead to infeasible operation of the whole network. Phase switching device (PSD), which can switch the connected phase of a residential load as required, is viable and efficient equipment to help address this issue. This paper, based on three-phase power flow (TUPF) formulation, aims to investigate the benefit of PSD on improving the operation feasibility of LVDN. The linear model of TUPF with PSD is presented to effectively take the flexible device into account, which can be conveniently used to seek the PSD positions that lead to a viable operation strategy of the original problem when infeasibility is reported by the traditional iteration-based algorithm. Case study based on a practical LVDN in Australia demonstrates the efficacy of the proposed method.

math.OC↗

arXiv2019

Unbalance Mitigation via Phase-switching Device and Static Var Compensator in Low-voltage Distribution Network

As rooftop solar PVs installed by residential customers penetrate in low voltage distribution network (LVDN), some issues, e.g. over/under voltage and unbalances, which may undermine the network's operational performance, need to be effectively addressed. To mitigate unbalances in LVDN, dynamic switching devices (PSDs) and static var compensator (SVC) are two equipment that are cost-effective and efficient. However, most existing research on operating PSDs are based on inflexible heuristic algorithms or without considering the network formulation, which may lead to strategies that violate operational requirements. Moreover, few pieces of literature have been reported on mitigating unbalances in LVDN via SVC and PSDs together. This paper, after presenting the dispatch model of SVC, formulates the decision-making process as a mixed-integer non-convex programming (MINCP) problem considering all practical operational requirements. To efficiently solve the challenging problem, the MINCP is reformulated as a mixed-integer second order-cone programming (MISOCP) problem based on either exact reformulations or accurate approximations, making it possible to employ efficient off-the-shelf solvers. Simulations based on a modified IEEE system and a practical system in Australia demonstrates the efficiency of the proposed method in mitigating unbalances in LVDN.

math.OC↗

arXiv2016

A Novel Projected Two Binary Variables Formulation for Unit Commitment Problem

The thermal unit commitment (UC) problem often can be formulated as a mixed integer quadratic programming (MIQP), which is difficult to solve efficiently, especially for large-scale instances. In this paper, with projecting unit generation level onto [0,1] and reformulation techniques, a novel two binary (2-bin) variables MIQP formulation for UC problem is presented. We show that 2-bin formulation is more compact than the state-of-the-art one binary (1-bin) variable formulation and three binary (3-bin) variables formulation. Moreover, 2-bin formulation is tighter than 1-bin and 3-bin formulations in quadratic cost function, and it is tighter than 1-bin formulation in linear constraints. Three mixed integer linear programming (MILP) formulations can be obtained from three UC MIQPs by replacing the quadratic terms in the objective functions by a sequence of piece-wise perspective-cuts. 2-bin MILP is also the best one due to the similar reasons of MIQP. The simulation results for realistic instances that range in size from 10 to 200 units over a scheduling period of 24 hours show that the proposed 2-bin formulations are competitive with currently state-of-the-art formulations and promising for large-scale UC problems.

math.OC↗