arXiv ScienceSearch

arXiv subjects

Ke Luo

Publications and source records attributed to Ke Luo.

7 recordsLinked to original sources

CoDrone: Autonomous Drone Navigation Assisted by Edge and Cloud Foundation Models

Autonomous navigation for Unmanned Aerial Vehicles faces key challenges from limited onboard computational resources, which restrict deployed deep neural networks to shallow architectures incapable of handling complex environments. Offloading tasks to remote edge servers introduces high latency, creating an inherent trade-off in system design. To address these limitations, we propose CoDrone - the first cloud-edge-end collaborative computing framework integrating foundation models into autonomous UAV cruising scenarios - effectively leveraging foundation models to enhance performance of resource-constrained unmanned aerial vehicle platforms. To reduce onboard computation and data transmission overhead, CoDrone employs grayscale imagery for the navigation model. When enhanced environmental perception is required, CoDrone leverages the edge-assisted foundation model Depth Anything V2 for depth estimation and introduces a novel one-dimensional occupancy grid-based navigation method - enabling fine-grained scene understanding while advancing efficiency and representational simplicity of autonomous navigation. A key component of CoDrone is a Deep Reinforcement Learning-based neural scheduler that seamlessly integrates depth estimation with autonomous navigation decisions, enabling real-time adaptation to dynamic environments. Furthermore, the framework introduces a UAV-specific vision language interaction module incorporating domain-tailored low-level flight primitives to enable effective interaction between the cloud foundation model and the UAV. The introduction of VLM enhances open-set reasoning capabilities in complex unseen scenarios. Experimental results show CoDrone outperforms baseline methods under varying flight speeds and network conditions, achieving a 40% increase in average flight distance and a 5% improvement in average Quality of Navigation.

cs.RO

Hierarchical Recording Architecture for Three-Dimensional Magnetic Recording

Three-dimensional magnetic recording (3DMR) is a highly promising approach to achieving ultra-large data storage capacity in hard disk drives. One of the greatest challenges for 3DMR lies in performing sequential and correct writing of bits into the multi-layer recording medium. In this work, we have proposed a hierarchical recording architecture based on layered heat-assisted writing with a multi-head array. The feasibility of the architecture is validated in a dual-layer 3DMR system with FePt-based thin films via micromagnetic simulation. Our results reveal the magnetization reversal mechanism of the grains, ultimately attaining appreciable switching probability and medium signal-to-noise ratio (SNR) for each layer. In particular, an optimal head-to-head distance is identified as the one that maximizes the medium SNR. Optimizing the system's noise resistance will improve the overall SNR and allow for a smaller optimal head-to-head distance, which can pave the way for scaling 3DMR to more recording layers.

cs.AR

BeeFlow: Behavior Tree-based Serverless Workflow Modeling and Scheduling for Resource-Constrained Edge Clusters

Serverless computing has gained popularity in edge computing due to its flexible features, including the pay-per-use pricing model, auto-scaling capabilities, and multi-tenancy support. Complex Serverless-based applications typically rely on Serverless workflows (also known as Serverless function orchestration) to express task execution logic, and numerous application- and system-level optimization techniques have been developed for Serverless workflow scheduling. However, there has been limited exploration of optimizing Serverless workflow scheduling in edge computing systems, particularly in high-density, resource-constrained environments such as system-on-chip clusters and single-board-computer clusters. In this work, we discover that existing Serverless workflow scheduling techniques typically assume models with limited expressiveness and cause significant resource contention. To address these issues, we propose modeling Serverless workflows using behavior trees, a novel and fundamentally different approach from existing directed-acyclic-graph- and state machine-based models. Behavior tree-based modeling allows for easy analysis without compromising workflow expressiveness. We further present observations derived from the inherent tree structure of behavior trees for contention-free function collections and awareness of exact and empirical concurrent function invocations. Based on these observations, we introduce BeeFlow, a behavior tree-based Serverless workflow system tailored for resource-constrained edge clusters. Experimental results demonstrate that BeeFlow achieves up to 3.2X speedup in a high-density, resource-constrained edge testbed and 2.5X speedup in a high-profile cloud testbed, compared with the state-of-the-art.

cs.DC

Serving Graph Neural Networks With Distributed Fog Servers For Smart IoT Services

Graph Neural Networks (GNNs) have gained growing interest in miscellaneous applications owing to their outstanding ability in extracting latent representation on graph structures. To render GNN-based service for IoT-driven smart applications, traditional model serving paradigms usually resort to the cloud by fully uploading geo-distributed input data to remote datacenters. However, our empirical measurements reveal the significant communication overhead of such cloud-based serving and highlight the profound potential in applying the emerging fog computing. To maximize the architectural benefits brought by fog computing, in this paper, we present Fograph, a novel distributed real-time GNN inference framework that leverages diverse and dynamic resources of multiple fog nodes in proximity to IoT data sources. By introducing heterogeneity-aware execution planning and GNN-specific compression techniques, Fograph tailors its design to well accommodate the unique characteristics of GNN serving in fog environments. Prototype-based evaluation and case study demonstrate that Fograph significantly outperforms the state-of-the-art cloud serving and fog deployment by up to 5.39x execution speedup and 6.84x throughput improvement.

cs.DC

Real-Time High-Resolution Pedestrian Detection in Crowded Scenes via Parallel Edge Offloading

To identify dense and small-size pedestrians in surveillance systems, high-resolution cameras are widely deployed, where high-resolution images are captured and delivered to off-the-shelf pedestrian detection models. However, given the highly computation-intensive workload brought by the high resolution, the resource-constrained cameras fail to afford accurate inference in real time. To address that, we propose Hode, an offloaded video analytic framework that utilizes multiple edge nodes in proximity to expedite pedestrian detection with high-resolution inputs. Specifically, Hode can intelligently split high-resolution images into respective regions and then offload them to distributed edge nodes to perform pedestrian detection in parallel. A spatio-temporal flow filtering method is designed to enable context-aware region partitioning, as well as a DRL-based scheduling algorithm to allow accuracy-aware load balance among heterogeneous edge nodes. Extensive evaluation results using realistic prototypes show that Hode can achieve up to 2.01% speedup with very mild accuracy loss.

cs.NI

Edge Robotics: Edge-Computing-Accelerated Multi-Robot Simultaneous Localization and Mapping

With the wide penetration of smart robots in multifarious fields, Simultaneous Localization and Mapping (SLAM) technique in robotics has attracted growing attention in the community. Yet collaborating SLAM over multiple robots still remains challenging due to performance contradiction between the intensive graphics computation of SLAM and the limited computing capability of robots. While traditional solutions resort to the powerful cloud servers acting as an external computation provider, we show by real-world measurements that the significant communication overhead in data offloading prevents its practicability to real deployment. To tackle these challenges, this paper promotes the emerging edge computing paradigm into multi-robot SLAM and proposes RecSLAM, a multi-robot laser SLAM system that focuses on accelerating map construction process under the robot-edge-cloud architecture. In contrast to conventional multi-robot SLAM that generates graphic maps on robots and completely merges them on the cloud, RecSLAM develops a hierarchical map fusion technique that directs robots' raw data to edge servers for real-time fusion and then sends to the cloud for global merging. To optimize the overall pipeline, an efficient multi-robot SLAM collaborative processing framework is introduced to adaptively optimize robot-to-edge offloading tailored to heterogeneous edge resource conditions, meanwhile ensuring the workload balancing among the edge servers. Extensive evaluations show RecSLAM can achieve up to 39% processing latency reduction over the state-of-the-art. Besides, a proof-of-concept prototype is developed and deployed in real scenes to demonstrate its effectiveness.

cs.RO

Edge Intelligence: Paving the Last Mile of Artificial Intelligence with Edge Computing

With the breakthroughs in deep learning, the recent years have witnessed a booming of artificial intelligence (AI) applications and services, spanning from personal assistant to recommendation systems to video/audio surveillance. More recently, with the proliferation of mobile computing and Internet-of-Things (IoT), billions of mobile and IoT devices are connected to the Internet, generating zillions Bytes of data at the network edge. Driving by this trend, there is an urgent need to push the AI frontiers to the network edge so as to fully unleash the potential of the edge big data. To meet this demand, edge computing, an emerging paradigm that pushes computing tasks and services from the network core to the network edge, has been widely recognized as a promising solution. The resulted new inter-discipline, edge AI or edge intelligence, is beginning to receive a tremendous amount of interest. However, research on edge intelligence is still in its infancy stage, and a dedicated venue for exchanging the recent advances of edge intelligence is highly desired by both the computer system and artificial intelligence communities. To this end, we conduct a comprehensive survey of the recent research efforts on edge intelligence. Specifically, we first review the background and motivation for artificial intelligence running at the network edge. We then provide an overview of the overarching architectures, frameworks and emerging key technologies for deep learning model towards training/inference at the network edge. Finally, we discuss future research opportunities on edge intelligence. We believe that this survey will elicit escalating attentions, stimulate fruitful discussions and inspire further research ideas on edge intelligence.

cs.DC