arXiv Science⌕ Search

arXiv subjects

Ke Li

Publications and source records attributed to Ke Li.

At least 19 recordsLinked to original sources

DrSai: an agentic AI system toward autonomous physics analysis workflows at BESIII

High Energy Physics (HEP) experiments like BESIII produce petabyte-scale data. Extracting physics results requires complex workflows (simulation, reconstruction, statistical analysis, etc.) that traditionally take experts months or years. Current manual methods are labor-intensive, prone to bias, and limit large-scale systematic scans. As data grows, this paradigm slows discovery. Large Language Models (LLMs) offer a solution. Their natural language understanding and code generation capabilities allow them to interpret scientific tasks and integrate with HEP tools (e.g., ROOT, BOSS) to act as an "AI partner" for autonomous analysis. We present DrSai, an LLM-powered multi-agent system that translates natural language into rigorous physics workflows. As validation, DrSai performed large-scale re-measurements of ten J/psi decay branching fractions - without manual coding. It successfully navigated the real BESIII computing environment and produced results matching established benchmarks. The article details DrSai's architecture, the validation results, and performance evaluation. This work provides a blueprint for autonomous discovery, with relevance to other data-intensive fields like astronomy and genomics.

hep-ex↗

TraceKV: Policy-Preserving Low-Rank KV Cache Compression for Reasoning Vision-Language Models

Reasoning vision-language models (VLMs) impose substantial KV cache demands from both large multimodal contexts and growing reasoning traces. Low-rank KV compression has emerged as a promising paradigm that stores low-dimensional latents of KV states and can be combined with quantization. However, existing low-rank methods often induce growing predictive policy drift from the dense model when compressing reasoning KV states, resulting in reasoning failures. We identify two key causes of this degradation: calibration-state mismatch between static contexts and on-policy reasoning states, and unequal error sensitivity across KV states. To address these challenges, we propose TraceKV, a training-free low-rank KV compression framework that unifies on-policy calibration, sensitivity-aware SVD, and global rank allocation under a single policy-preserving principle, substantially reducing policy-KL divergence during reasoning. Experiments across multiple VLMs and visual reasoning benchmarks demonstrate superior accuracy--memory trade-offs, achieving near-lossless reasoning accuracy with 5.64$\times$ KV cache compression when combined with quantization. Optimized low-rank attention kernels further deliver up to 1.83$\times$ end-to-end decoding speedup. Code will be available at https://github.com/AK-DREAM/TraceKV.

cs.CV↗

REFLEX: RNA Ensemble Generation via Flexibility-Calibrated Stochastic Bridge

RNA molecules often function through multiple experimentally observed conformational states. A central challenge is to capture ensemble diversity without sacrificing structural fidelity: samples may collapse toward averaged representative structures or drift into unsupported conformational regions. We introduce REFLEX (RNA Ensemble generation calibrated by FLEXibility), a sequence-conditioned generator for RNA backbone-frame ensembles based on a heteroscedastic stochastic bridge on SE(3). During training, experimental B-factors calibrate residue-wise bridge widths, exposing each observed conformer through local perturbation neighborhoods with residue-specific scales while keeping constrained regions sharper. A learned flexibility condition guides the bridge-field network to recover target conformer-specific frames from these calibrated noisy states. At inference, REFLEX uses only the input sequence, requiring no MSA-subsampling heuristics. On a multi-conformer RNA benchmark, REFLEX achieves the best precision-recall trade-off for ensemble coverage across evaluation thresholds, while recovery-stress ablations indicate gains in target-frame recovery under stronger perturbations.

cs.AI↗

TANGO: RNA Topology and Geometry Co-Design

Designing RNA sequences that satisfy target tertiary-structure objectives is an important problem in RNA engineering, with broad applications in synthetic biology and therapeutics. Existing 3D RNA design methods have made substantial progress, but they largely treat the target fold as a geometry-only objective. This is incomplete for RNA, whose functional folds are specified not only by tertiary geometry but also by secondary base-pairing topology. We therefore formulate RNA inverse design as a topology-and-geometry co-design problem and propose TANGO, a multi-objective multi-agent reinforcement learning framework for this task. TANGO adopts a staged curriculum: it first learns a topology-aware policy from secondary-structure targets, then transfers this policy to tertiary-structure targets to train a general co-design model, and finally applies frontier-guided fine-tuning to refine target-specific trade-offs among secondary-structure fidelity, tertiary-structure fidelity, and sequence diversity. Experiments show that TANGO generates diverse and novel designs, improving tertiary- and secondary-structure performance by 18.3% and 52.7%, respectively, over the strongest baseline.

cs.LG↗

Separating Common and Unique Directions for Model Merging

Model merging combines multiple fine-tuned models without additional training, and arithmetic methods have emerged as a simple yet effective way to merge models without data. However, existing arithmetic methods treat task vectors in parameter space and apply a single element-wise rule to directions that can differ in mergeability. In a shared directional basis, we find a consistent two-regime structure: a low-dispersion common bulk shared across tasks and a high-dispersion task-dominated tail that carries disproportionate energy. These findings motivate Common--Unique Subspace Decomposition (CUSD), a data-free pre-merging method that separates task vectors into common and unique directional components, merges the common components with a downstream arithmetic operator, and retains unique residuals separately. Experiments across $11$ base models, four model families, and four arithmetic-based merging operators show that CUSD improves 42 of 44 model--operator combinations and achieves up to 22.5% improvement over the corresponding baselines. Our code is publicly available at https://github.com/stwang666/CUSD

cs.LG↗

Multistep and Multivariate Time Series Explainability with GradientSHAP: A Wind Power Case Study

As the effects of climate change become increasingly apparent, the demand for renewable energy sources such as wind power continues to grow. However, renewables' variable and intermittent nature presents significant challenges in their integration into energy grids. Artificial intelligence (AI) has emerged as a powerful tool to address these issues. Still, its adoption in the energy sector has been hindered by the opacity of many AI models, which often function as black boxes. This paper introduces a carefully adapted GradientSHAP approach to provide interpretability for multivariate, multistep wind power forecasting -- a largely underexplored area. This capability is critical for day-ahead grid management and, to the best of our knowledge, this is the first study to apply GradientSHAP in the context of wind power forecasting. To address the inherent dimensionality, we developed novel visualizations that deliver both local and global explanations, uncovering intricate relationships between environmental factors, site-specific conditions, and temporal dynamics. While GradientSHAP is not an out-of-the-box solution, our findings demonstrate that, with thoughtful handling of SHAP values and domain expertise, it can offer valuable insights into model behaviour, supporting more informed and trustworthy decision-making. Nevertheless, its complexity poses challenges for practical implementation. Future research should focus on streamlining these interpretability methods to make them more actionable for routine deployment in critical energy applications.

cs.AI↗

RMS-AQA: A Two-Stage Spatial Audio Question Answering Benchmark for Real-World Domestic Environments

Embodied assistants in domestic environments must infer what happened, where and when it occurred, and how to respond. To address this, we introduce RMS-AQA, a spatial audio question answering (SAQA) benchmark for real-world domestic environments. The benchmark features a two-stage question-answering (QA) format to comprehensively assess the ability of audio-language models (ALMs) to first ground audible sound events and subsequently perform complex spatio-temporal reasoning based on that grounding. To maximize acoustic realism, our dataset combines authentic real-world first-order Ambisonics (FOA) recordings with high-fidelity synthetic data generated using measured room impulse responses (RIRs). Furthermore, we provide a lightweight spatial plug-in that injects FOA-format data into frozen audio-language backbones. Experimental results reveal that the primary challenges stem from concurrent sources, far distance, and sim-to-real domain gap between RIR-synthesized and authentic recordings.

cs.SD↗

MultiEvoSkill: Structure-Aware Multi-Agent Skill Evolution for Generalizable Skill Artifacts

Skill documents are becoming the default adaptation surface for frozen large language model (LLM) agents, but current skill generators face two key limitations. First, humans and different LLMs differ in how they organize procedural knowledge and approach task solving. Skills authored from a human or single-model perspective may therefore fail to align with the reasoning behaviors of other backbones, limiting cross-model generalization. Second, sequential skill descriptions inadequately represent procedures with parallel branches and explicit dependencies, while existing skill optimizers primarily operate on prose and lack explicit support for graph-structured skill evolution. We introduce MultiEvoSkill, a skill-optimization framework comprising three core components: 1) Skill compiler casts the skill as a typed graph with tailored operators, producing a compact, informative representation with explicit procedural topology; 2) Heterogeneous agent system proposes revision advices using collective intelligence, where minimal and informative issues are identified based on multiple sets of experiences. 3) Structure-aware debate and evolution mechanism organizes candidate edits into a heterogeneous graph, resolves them under dependency and importance constraints, and distills the collective proposal into the artifact. Multi-dimensional gating ensures the information gain and topological correctness of each evolution. Optimal skills are then obtained when the system converges at a consistent state. Various experiments and ablations against SOTA methods validate the effectiveness and generalization of MultiEvoSkill.

cs.AI↗

RigPAPR: Rig-Based Animation of Static Neural Point Clouds from a Fixed-Viewpoint Video

Static neural point reconstructions capture a subject at high fidelity from posed images. Given such a reconstruction, we aim to animate it to follow a monocular fixed-viewpoint driving video of the subject, whether captured or produced by image-to-video (I2V) generation, and to recover a rigged, re-posable 3D asset. Existing methods deform Gaussian splats through direct linear blend skinning (LBS) or mesh proxies, both of which are prone to joint-boundary artifacts under articulation, even with per-primitive corrections. We trace the artifact to the representation: each splat carries an individual shape calibrated in the canonical pose to tile with its neighbours. Under LBS each splat can be moved, rotated, or rescaled but never bent, so the canonical tiling comes apart at joint boundaries. Proximity attention point rendering (PAPR) instead carries no per-primitive shape; each pixel is recomposed at render time from the deformed primitives' positions, so the surface re-forms naturally with the articulation. We present RigPAPR, which auto-rigs a static PAPR cloud and drives it under direct LBS from a single fixed-viewpoint video, without a category template or a pose-dependent correction network. RigPAPR is competitive with the strongest baseline at the supervised view and outperforms splatting-based and mesh-based baselines at novel views, by 3~dB PSNR on synthetic subjects and about 2~dB on real-world subjects, with cleaner joint-boundary renderings.

cs.CV↗

Silence Is Not Assurance: When Production Lane Keeping Assist Does Not Warn, and What It Costs

Production lane keeping assist (LKA) systems tell the driver whether they detect the lane markings, but whether this displayed status reflects what the system perceives, and what happens when it does not, has not been examined in real-world driving. This study introduces CANDID-LKA, a CAN-based Diagnosis of the Indicated Detection status in LKA. It evaluates a proprietary driver-facing status using three signals: the displayed status and the steering torque of the driver, both recorded from the controller area network (CAN) bus of the vehicle, and the lane perception confidence of a third-party vision system observing the same road. The framework examines how the status responds to driving conditions and estimates how completely it reports degraded lane perception by comparing it with the other two signals in a latent-class model. We apply it to 39,800 seconds of real-world driving from 13 vehicle models of three manufacturers. The results show that the status does not respond consistently to the conditions that make markings harder to see, and that the three makes differ widely in how often they report not detected. The latent-class model shows that the displayed status is incomplete: it reports only 47% of degraded seconds as not detected, compared with 80% for the third-party low perception confidence, and in half of the low-confidence episodes it never reports not detected. In the silent seconds in which the status reads detected while the perception confidence is low and the driver is not in control, the standard deviation of lateral position over the next 3 s is about 60% larger than when the status and the perception confidence agree. A detected status thus does not guarantee reliable lane perception, and silence with the driver not in control is the case that most needs attention.

cs.RO↗

InfoQuant: Shaping Activation Distributions for Low-Bit LLM Quantization

Low-bit activation quantization remains a major bottleneck in efficient large language model (LLM) deployment. The difficulty is not only that activations contain outliers, but that their distributions are often poorly matched to a low-bit uniform quantizer. Existing post-training quantization (PTQ) methods suppress peaks, balance channels, or minimize reconstruction error, yet they rarely specify what activation distribution is actually easy to discretize. As a result, activations may appear numerically smoother while still incurring large quantization error because the quantization range remains wide or most values collapse into a few levels near the mean. We recast activation transformation as quantizer-facing distribution design and analyze quantization error from an information-theoretic perspective. Our analysis shows that quantization-friendly activations should jointly have a smaller numerical range and sufficient dispersion within that range. Guided by this analysis, we propose InfoQuant, a train-free method that employs Peak Suppression Orthogonal Transformation (PSOT) to shape activations into more quantization-friendly distributions. We further introduce adaptive outlier-token selection to improve the robustness of PSOT during optimization. Across multiple LLM families, InfoQuant consistently outperforms prior PTQ and end-to-end training baselines. Under W4A4KV4, it preserves 97% of floating-point accuracy on average and reduces the LLaMA-2 13B performance gap by 42% over the previous state of the art. Code is available at [https://github.com/LLIKKE/InfoQuant](https://github.com/LLIKKE/InfoQuant)

cs.LG↗

Low-Latency Beam-Background Suppression for the BESIII Trigger System Using Machine Learning Trained on Experimental Data

Beam-induced backgrounds contribute to the trigger and data-acquisition rate at high-luminosity electron-positron colliders. Their dependence on beam and machine conditions motivates data-driven studies alongside simulation. A data-driven machine-learning method for trigger-level beam-background suppression is developed using experimental data recorded by BESIII. Compact neural-network classifiers are trained and evaluated for two trigger configurations: one based only on tracking and time-of-flight information, and one based only on electromagnetic-calorimeter information. Each classifier uses 48 binary Level-1 trigger conditions of the BESIII detector. The models distinguish hadron events from beam-background events and are evaluated against the established trigger selection at matched hadron-event efficiency. Relative to the established trigger selection, the beam-background false-positive rate is reduced by 20-60% across the studied configurations and center-of-mass energies, with stable suppression performance as tested using random-trigger data. Hardware-oriented synthesis indicates that the compact network is suitable for low-latency FPGA implementation. The proposed method can reduce the fraction of beam-background events in the trigger stream in future BESIII trigger upgrades. It also provides a reference for trigger optimization at future high-luminosity electron-positron colliders.

hep-ex↗

LED-BENCH: A Benchmark for Large-format Engineering Drawing Understanding

Real-world engineering drawings are often large-format and information-dense. Answering practical engineering questions therefore requires both fine-grained understanding of engineering information and complex reasoning over objects, relations, and evidence distributed across different regions or views. Existing benchmarks cover a range of engineering-drawing understanding tasks involving local regions, individual views, specific elements, or more constrained visual settings. However, systematic evaluation of understanding over realistic, large-format engineering drawings remains limited. To address this gap, we introduce LED-BENCH, a multidisciplinary benchmark designed to evaluate fine-grained understanding and complex reasoning over large-format engineering drawings, spanning the mechanical, architectural, and transportation domains. Extensive evaluation of 11 representative multimodal large language models, including 8 proprietary models and 3 open-source models, reveals substantial remaining difficulty: GPT-5.6 Sol achieves 52.65% average accuracy, performance varies across engineering domains, and all evaluated models perform worse on questions requiring broader evidence integration. These results highlight fine-grained understanding, evidence integration, and complex reasoning over large-format engineering drawings as persistent challenges for current multimodal models.

cs.CV↗

CocoRNA: Collective RNA Design with Cooperative Multi-agent Reinforcement Learning

Designing RNA sequences that reliably fold into specific secondary structures is essential for understanding their biological functions but remains a challenging computational problem. We propose CocoRNA, a cooperative multi-agent reinforcement learning framework for RNA inverse design. CocoRNA simplifies the design task by decomposing it into smaller sub-problems, each solved collaboratively by multiple agents. This approach reduces the complexity of the problem and improves the exploration of design policies. During training, a centralized critic uses global structural information to guide the agents, enabling them to jointly optimize their design strategies. As a result, CocoRNA learns high-quality RNA design policies that generalize effectively to unseen structures without additional training. Experiments on the Rfam dataset demonstrate that CocoRNA substantially outperforms state-of-the-art methods in both success rate and design speed. Further experiments on other biological sequence design tasks highlight the effectiveness and broad potential of CocoRNA for complex design tasks.

cs.LG↗

MCPDisCo: Seesaw-Mitigated Tuning for MCP-Native Agents

The Model Context Protocol provides a shared interaction substrate for the agentic web, allowing heterogeneous services to expose capabilities through a standardized interface. Learning to use this ecosystem entails a hierarchy of capabilities: tool-format skills, server-level transfer, and cross-server composition. We present MCPDisCo, an ecosystem-scale reinforcement learning framework for MCP-native agents. Using a Thought-Markov Decision Process (Thought-MDP), the framework explicitly represents internal reasoning alongside routing, execution, and termination and trains on real-server, long-horizon interactions spanning 70 MCP servers and 527 tools across six domains. We study the reasoning--tool seesaw, a joint-learning failure mode in which improvement in one objective can accompany deterioration in the other. To mitigate potential interference, MCPDisCo combines token-masked reward attribution with bidirectional gradient surgery: the former separates direct supervision for reasoning and action spans, while the latter removes conflicting components from both objective gradients in shared parameters. MCPDisCo achieves higher success with fewer chain-of-thought tokens. On the out-of-distribution MCP-Atlas and the GAIA benchmark, MCPDisCo maintains monotone gains, confirming that the learned behavior generalizes beyond the training server distribution and broader agentic tasks. Model weight and implementation are available.

cs.AI↗

\textbf{\textsc{HepUKE}}: Uncertainty-aware Knowledge Evolution for High Energy Physics Analysis Agents

Knowledge bases are essential to agents for high energy physics (HEP), supplying few-shot evidence for previously unseen tasks. Their principal utility lies in strategic guidance for novel analyses rather than ready-made answers or reusable code. Prevailing systems, however, treat all retrieved evidence as equally trustworthy and fail to accrue knowledge from the analyses under assistance. In this paper, inspired by the standard HEP treatment of uncertainty, we propose \textbf{\textsc{\underline{HepUKE}}}: an \textbf{\underline{U}}ncertainty-aware \textbf{\underline{K}}nowledge \textbf{\underline{E}}volution system for \textbf{\underline{HEP}} that repurposes information entropy to unify statistical uncertainty from LLM generation and systematic uncertainty from HEP methodological choices. Upon it, we construct a self-evolving domain-specific-language (DSL) knowledge base and release a large-scale expert-annotated HEP physics-analysis benchmark. Per-evidence confidence is quantified via the information entropy of sampled DSL generations: high-confidence precedents constrain program synthesis, whereas analyses lacking close precedents are validated and written back, sustaining continual knowledge evolution. To handle the highly redundant yet logically stringent nature of HEP knowledge, we introduce an early-stopping controller that fuses a backward stationarity test on the answer posterior with a forward marginal information gain estimate. On the 1,000-pair BESIII PhysicsQA benchmark, HepUKE reduces retrieval rounds by 43.0\% while preserving most answer quality, and on the out-of-domain HotpotQA benchmark, it reduces retrieval rounds by 14.5\% with a similar quality--efficiency trade-off. The code and datasets used in this work are available at https://anonymous.4open.science/r/HepUKE-32FF.

hep-ex↗

MixedTruth: Component-Level Detection of Synthetic Speech and Synthetic Background in Mixed Audio

Modern generative audio can fabricate not only voices but also the acoustic environments that provide evidence of when and where speech occurred. This capability undermines a longstanding forensic assumption that background sound provides reliable evidence of a recording's provenance. Yet existing detectors produce only a single real-or-synthetic verdict, leaving analysts unable to determine whether the voice, the environment, or both were manipulated. In this paper, we propose a component-level forensic detector, namely TruMix, which classifies recordings into eight categories spanning the presence and authenticity of speech and background. TruMix has a unique multi-path architecture that jointly analyzes speech-oriented and background-oriented spectral evidence, contextual information from the mixed waveform, and low-level synthesis artifacts. This design avoids the artifact propagation inherent in conventional separate-then-detect pipelines while enabling generalization across independent speech and environmental-sound generators. We also curated MixedTruth, a 4,917-hour benchmark covering all eight categories under diverse mixing conditions. Extensive experiments show that TruMix achieves 98.51% AUC for component-level attribution, significantly outperforms ten state-of-the-art synthetic-speech detectors in conventional binary classification, and exhibits strong robustness across four attack tiers.

cs.SD↗

MoFlow: One-Step Flow Matching for Human Trajectory Forecasting via Implicit Maximum Likelihood Estimation based Distillation

In this paper, we address the problem of human trajectory forecasting, which aims to predict the inherently multi-modal future movements of humans based on their past trajectories and other contextual cues. We propose a novel motion prediction conditional flow matching model, termed MoFlow, to predict K-shot future trajectories for all agents in a given scene. We design a novel flow matching loss function that not only ensures at least one of the $K$ sets of future trajectories is accurate but also encourages all $K$ sets of future trajectories to be diverse and plausible. Furthermore, by leveraging the implicit maximum likelihood estimation (IMLE), we propose a novel distillation method for flow models that only requires samples from the teacher model. Extensive experiments on the real-world datasets, including SportVU NBA games, ETH-UCY, and SDD, demonstrate that both our teacher flow model and the IMLE-distilled student model achieve state-of-the-art performance. These models can generate diverse trajectories that are physically and socially plausible. Moreover, our one-step student model is $\textbf{100}$ times faster than the teacher flow model during sampling. The code, model, and data are available at our project page: https://moflow-imle.github.io

cs.CV↗